Mackie Mix Series Mix8 8-Channel Mixer, Black

The Mackie Mix8 is an 8-channel compact analog mixer designed to bring microphones, instruments, playback sources, and external effects together in one straightforward control center. It provides two mic/line channels plus stereo line-input channels for small live sound, rehearsal, content-creation, and basic recording setups. Its compact layout helps users manage several sources without requiring a large-format console.

Two mic/line inputs use Mackie low-noise preamps and accept balanced XLR microphone connections or 1/4-inch line-level connections. A global phantom-power switch supports compatible condenser microphones. Gain controls, channel level controls, pan or balance controls, and overload LEDs help set levels cleanly before the signal reaches the main mix.

Each channel includes 3-band EQ for practical tonal adjustment, with shelving high and low controls plus a peaking midrange control. The EQ is centered at 12 kHz, 2.5 kHz, and 80 Hz, respectively, with up to 15 dB of boost or cut. This provides useful control for balancing vocals, instruments, keyboards, playback devices, and other line-level sources.

The Mix8 includes an auxiliary send for feeding a monitor mix or an external effects processor. Its stereo aux return can bring processed effects back into the mix, or serve as an additional stereo line-input path when needed. The aux send is post-fader, so changes to a channel level also affect the amount sent to the auxiliary bus.

For connecting the rest of a system, the mixer provides main left/right outputs, separate control-room outputs, a headphone output, and dedicated stereo RCA tape inputs and outputs. The main outputs can feed powered speakers or an amplifier connected to passive speakers, while the control-room outputs are suited to powered monitors or a headphone distribution amplifier. RCA I/O provides an analog path for playback and stereo recording with compatible equipment.

Key Features

• Eight-Channel Format: Combines mic, stereo line, and aux-return signal paths in a compact mixer.
• Dual Mic/Line Inputs: Connect microphones or line-level sources through two versatile input channels.
• Global Phantom Power: Supplies phantom power to compatible condenser microphones connected by XLR.
• Three-Band EQ: Adjusts low, mid, and high frequencies on every channel.
• Post-Fader Aux Send: Feeds monitors or external effects while tracking channel-level changes.
• Dedicated Recording I/O: RCA inputs and outputs support analog playback and stereo recording.

Design & Installation

The Mix8 uses a rugged metal chassis and a compact desktop-friendly format measuring 7.8 inches wide, 9.6 inches deep, and 2.1 inches high. Clearly arranged knobs, input jacks, channel overload indicators, and a four-LED stereo meter keep essential controls accessible. It weighs 2.5 pounds, making it practical for portable setups as well as permanent workspaces.

Connect microphones to the XLR inputs and line-level equipment to the appropriate 1/4-inch or RCA inputs, then route the main outputs to powered speakers or an amplifier. Connect powered monitors to the control-room outputs and headphones to the phones output for monitoring. Start with levels turned down, connect the supplied external AC power supply, then bring up source and main levels gradually while watching the overload indicators.