EMB Professional EMIC-1550PRO Dual VHF Wireless Microphone System

The EMB Professional EMIC-1550PRO is a dual-channel VHF wireless microphone system that adds two handheld vocal microphones to a compatible audio setup. It is designed for users who need straightforward wireless speech or singing reinforcement without a large rack-style receiver. Typical uses include karaoke, DJ setups, classrooms, worship spaces, presentations, announcements, and small events.

The system includes two handheld wireless microphones and a compact rechargeable receiver, allowing two people to use separate microphone channels at the same time. Individual receiver controls for channels A and B help users balance each microphone level for the room and connected sound system. Its plug-and-play operating approach is intended to simplify setup for portable and everyday applications.

Operating in the VHF range, the EMIC-1550PRO uses DSP chip frequency-lock technology for its wireless operation. EMB lists a 100 Hz to 10 kHz frequency response, 600-ohm impedance, and -72 dB sensitivity. These specifications suit basic vocal and speech applications where clear communication and convenient wireless use are the priority.

The receiver connects to compatible audio equipment through a 6.35 mm connection, with a 3.5 mm adapter included for compatible equipment using a 3.5 mm input. This allows the system to work with compatible mixers, powered speakers, amplifiers, karaoke equipment, stereos, and other audio devices with an appropriate microphone or audio input. The receiver's rechargeable lithium battery supports portable use without relying on continuous AC power during operation.

Each handheld microphone uses two AA batteries, while the receiver uses its own built-in rechargeable battery. EMB specifies approximately 4 to 8 hours of receiver operating time after about two hours of charging. The EMIC-1550PRO is a practical wireless front end for an existing PA, karaoke, or amplification system that needs two handheld microphones.

Key Features

• Dual Handheld Channels: Supports two wireless handheld microphones for two-person use.
• VHF Wireless Operation: Provides wireless vocal transmission in the VHF frequency range.
• DSP Frequency Lock: Uses DSP chip frequency-lock technology for system operation.
• Rechargeable Receiver: Built-in lithium battery supports portable receiver operation.
• 6.35 mm Output: Connects directly to compatible audio equipment with a 6.35 mm input.
• 3.5 mm Adapter Included: Expands compatibility with equipment using a 3.5 mm input.

Design & Installation

The EMIC-1550PRO uses handheld microphones with metal construction and a compact receiver designed for portable setups. The receiver includes a display, two antennas, separate channel volume controls, and a power control. Each microphone has its own battery compartment, power switch, and display.

Charge the receiver before use, install two AA batteries in each microphone, and attach the receiver antennas. Connect the receiver to a compatible microphone or audio input using its 6.35 mm connector, or use the included 3.5 mm adapter when appropriate. Power on the receiver and microphones, then set the channel and connected-system volume levels to suit the application.