EMB Professional 352XM12F16G 12ft 3.5mm to Dual XLR Cable

The EMB Professional 352XM12F16G is a 12-foot audio breakout cable designed to link equipment with a 3.5mm connection to devices using dual male XLR connections. It provides a physical signal path where these connector formats need to be integrated in the same audio setup. Its extended length can help accommodate equipment placement across a booth, room, rack, or stage area.

This cable is intended for users connecting compatible consumer, portable, playback, or audio-source equipment to gear with corresponding female XLR connections. It can be useful in home audio, DJ, club, studio, stage, and entertainment environments. Before purchase, confirm that both the source and destination equipment use the required connector types and genders.

The 352XM12F16G is a passive connection accessory rather than a powered audio component. It does not add amplification, playback capability, processing, or level control to an audio system. Final system performance depends on the connected source device, receiving equipment, gain settings, cable routing, and installation environment.

Its cable-and-breakout layout routes one 3.5mm connection to two male XLR terminations. This configuration can help organize an audio-routing path when a single 3.5mm-equipped device must interface with a dual-XLR connection arrangement. The model is identified with a 16G designation, though detailed conductor, shielding, pinout, and connector-plating specifications are not confirmed.

In a complete system, the EMB Professional 352XM12F16G can serve as an interface cable alongside compatible mixers, speakers, audio interfaces, amplifiers, or other connected equipment. It is not a substitute for a mixer, converter, amplifier, or audio interface when those components are needed for the application. Allow enough slack at each connection point and avoid strain, pinch points, and sharp bends during setup.

Key Features

• 3.5mm-to-XLR Breakout: Connects a 3.5mm-equipped device to dual XLR terminations.
• Dual Male XLR Ends: Provides two male XLR connectors for compatible female XLR connections.
• 12-Foot Cable Length: Supports more flexible placement of connected audio equipment.
• 16G Designation: Identified as 16G in the listed model information.
• Passive Audio Accessory: Adds a cable path without amplification or audio processing.
• Multiple Setup Uses: Listed for home, DJ, club, studio, stage, and entertainment systems.

Design & Installation

The 352XM12F16G uses a cable-and-breakout design with one 3.5mm connection on one end and two male XLR connections on the other. Its confirmed physical details include the 12-foot length, dual male XLR termination, and 16G designation. Specific information about conductor material, shielding, jacket material, connector plating, and internal pinout is not confirmed.

Match the 3.5mm connection and both XLR connectors to the available ports on the equipment before installation. The dual male XLR ends require compatible female XLR inputs or couplers, while the 3.5mm end must fit the source device's connection. Route the cable away from pinch points, avoid excessive tension at the connectors, and verify system gain settings after connecting equipment.