Gravity SG-6HW 6.5" In-Wall/In-Ceiling Speaker

The Gravity SG-6HW is a 6.5-inch flush-mount, 2-way speaker for in-wall and in-ceiling audio installations. It provides an alternative to freestanding speakers where floor, shelf, or furniture space is limited. Its low-profile format suits residential rooms, offices, and custom audio installations on suitable flat surfaces.

This is a full-range speaker design, not a self-powered subwoofer despite some marketplace naming. It combines a 6.5-inch woven-cone woofer for low and midrange output with a 1-inch silk-dome tweeter for high frequencies. The published 60 Hz to 20 kHz frequency response supports general music, television, and distributed-audio listening.

The SG-6HW has a published maximum power rating of 200 watts and sensitivity greater than 89 dB. It requires connection to an appropriate external speaker amplifier or receiver; no built-in amplification is specified. Because impedance and RMS power ratings are not published, amplifier matching should be based on the complete system requirements.

A round, stain-resistant grille helps the speaker blend into flush-mounted wall or ceiling layouts. The compact design is intended to preserve a clean room appearance while keeping the speaker enclosure out of sight. It can be used as part of a distributed-audio zone, surround setup, or general-purpose room audio system.

Installation hardware is supplied to help prepare and secure the speaker in a compatible opening. The package includes a cutout template, quick-connect adapter speaker terminals, fixing clips, and a manual. Before cutting, confirm the mounting cavity is clear, the surface is suitable, and the speaker wire route is planned.

Key Features

• 6.5-Inch Woven-Cone Woofer: Handles the speaker's low- and mid-frequency range.
• 1-Inch Silk-Dome Tweeter: Reproduces the high-frequency portion of the 2-way design.
• 2-Way Configuration: Uses dedicated woofer and tweeter drivers for wide-range playback.
• 200-Watt Maximum Power: Supports use with an appropriately matched external amplifier.
• Flush-Mount Construction: Integrates into compatible wall or ceiling openings.
• Included Installation Hardware: Provides a template, fixing clips, and quick-connect terminals.

Design & Installation

The SG-6HW uses a woven woofer cone and silk-dome tweeter behind a round, stain-resistant grille. Its flush-mount construction is designed to sit within a prepared wall or ceiling opening rather than occupy a shelf or floor. The speaker is supplied individually and is intended for fixed-installation audio applications.

Use the included cutout template to mark the opening, then secure the speaker using its fixing clips. Connect speaker wire through the quick-connect adapter terminals and drive it from a suitable external amplifier or receiver. Verify cavity clearance, wiring access, mounting-surface condition, and system compatibility before installation.