{"product_id":"2-x-audiotek-3-8-500w-car-audio-pro-heavy-duty-titanium-super-tweeter-pair","title":"Audiotek ATW440P 3.8\" Titanium Super Tweeter Pair","description":"\u003cp\u003eThe Audiotek ATW440P is a pair of 3.8-inch car audio super tweeters designed to add dedicated high-frequency output to a component speaker system. Each unit is identified as an AT-W440 tweeter and is rated at 8 ohms with a listed 3,000 Hz to 25,000 Hz frequency response. They are intended for vehicle installations where existing speakers need added upper-frequency coverage.\u003c\/p\u003e\u003cp\u003eThis pair is suited to listeners building or refreshing a car audio system with separate midrange, bass, and high-frequency drivers. The included crossover capacitors support use as dedicated tweeters rather than direct full-range drivers. With a listed 99 dB sensitivity, the tweeters are specified to produce useful output from modest amplifier power when the system is set up appropriately.\u003c\/p\u003e\u003cp\u003eThe AT-W440 design focuses on the upper-frequency range, covering the detail, presence, and high-frequency information above its 3,000 Hz lower response limit. Its 1-inch super-tweeter element is designed to complement compatible midrange speakers rather than replace them. The 8-ohm nominal impedance should be considered when matching channels, passive components, and system wiring.\u003c\/p\u003e\u003cp\u003eConstruction details include an aluminum dome design, aluminum voice coil, and die-cast aluminum frame. The frame provides a rigid mounting structure, while spade terminals provide a straightforward connection point for speaker wiring. Built-in tweeter protection is also listed for each unit.\u003c\/p\u003e\u003cp\u003eThe ATW440P package includes two tweeters, crossover capacitors, and installation accessories for a paired high-frequency upgrade. Its 1-5\/8-inch mounting depth and 3.75-inch overall diameter provide useful fitment references before installation. It can be used as part of a component system alongside properly filtered midrange speakers and a compatible amplifier or head unit.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaired Super Tweeters:\u003c\/strong\u003e Includes two AT-W440 high-frequency drivers for stereo installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3,000–25,000 Hz Response:\u003c\/strong\u003e Covers the specified upper-frequency range for component systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Ohm Impedance:\u003c\/strong\u003e Supports matching with compatible amplifier channels and crossovers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e99 dB Sensitivity:\u003c\/strong\u003e Listed sensitivity supports efficient high-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDie-Cast Aluminum Frame:\u003c\/strong\u003e Provides a rigid structure for secure mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrossover Capacitors Included:\u003c\/strong\u003e Helps route appropriate high-frequency content to the tweeters.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AT-W440 uses a die-cast aluminum frame, aluminum dome design, and aluminum voice coil. Each tweeter has a listed 2-3\/4-inch magnet with a 5.4-ounce magnet weight. Spade terminals are provided for speaker-wire connection, and built-in protection is listed as part of the tweeter design.\u003c\/p\u003e\u003cp\u003eConfirm available mounting space before installation: the listed overall diameter is 3.75 inches and mounting depth is 1-5\/8 inches. Install the included crossover capacitors as part of the tweeter circuit and use the pair with compatible midrange or full-range speakers for a component-style system. Match the wiring and amplifier channel to the listed 8-ohm impedance, and avoid sending low-frequency content to the tweeters.\u003c\/p\u003e","brand":"AUDIOTEK","offers":[{"title":"Default Title","offer_id":47997549805731,"sku":"ATW440P","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/1_0fd84de7-a751-4575-88a9-8e79d8dca742.jpg?v=1786835256","url":"https:\/\/nsiexport.com\/products\/2-x-audiotek-3-8-500w-car-audio-pro-heavy-duty-titanium-super-tweeter-pair","provider":"NSI Export","version":"1.0","type":"link"}