{"title":"Tweeters","description":null,"products":[{"product_id":"audio360-ad36tw-4-inch-super-tweeter-speaker-4-ohm-1800w-max-power-105db-sensitivity-titanium-diaphragm-ccaw-voice-coil-for-pro-car-audio","title":"Audio360 AD36TW 4-Inch Super Tweeter Speaker","description":"\u003cp\u003eThe AUDIO360 AD36TW is a 4-inch super tweeter designed to add high-frequency detail to a car-audio system. It is a 4-ohm speaker with a published frequency range of 2 kHz to 20 kHz. This makes it suited to systems that need a dedicated driver for upper-frequency reproduction alongside midrange speakers and subwoofers.\u003c\/p\u003e\u003cp\u003eWith a published sensitivity of 105 dB, the AD36TW is intended for applications where efficient high-frequency output is important. Its 1,800-watt maximum-power specification identifies it as a pro-car-audio-oriented component, while no RMS power rating is published. Match the speaker with compatible amplification and system tuning rather than selecting equipment from maximum-power figures alone.\u003c\/p\u003e\u003cp\u003eThe AD36TW uses a titanium diaphragm and a CCAW voice coil. Titanium is specified for the diaphragm material, while CCAW refers to copper-clad aluminum wire in the voice coil. These published construction details distinguish the driver from basic paper- or polymer-diaphragm tweeters.\u003c\/p\u003e\u003cp\u003eThis super tweeter is a practical choice for enthusiasts building a multi-driver setup that needs more presence in the upper frequencies. Its 4-ohm nominal impedance allows it to be considered for amplifiers or passive networks designed for 4-ohm speaker loads. The published 2 kHz to 20 kHz range provides a useful starting point when planning system crossover points.\u003c\/p\u003e\u003cp\u003eThe 12.3-ounce magnet specification supports the AD36TW's dedicated high-frequency-driver design. Use it as part of a properly configured car-audio system rather than as a full-range replacement speaker. Because published mounting measurements and included accessories are not available, confirm physical fitment and installation hardware before purchase.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Inch Super Tweeter:\u003c\/strong\u003e Adds a dedicated high-frequency driver to compatible car-audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Nominal Impedance:\u003c\/strong\u003e Supports matching with compatible 4-ohm amplifier or crossover channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,800W Maximum Power:\u003c\/strong\u003e Published maximum-power handling for pro-car-audio system planning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e105 dB Sensitivity:\u003c\/strong\u003e Indicates efficient output from the rated speaker input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTitanium Diaphragm:\u003c\/strong\u003e Uses a titanium diaphragm for high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coil:\u003c\/strong\u003e Features a copper-clad aluminum wire voice coil.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD36TW combines a titanium diaphragm, CCAW voice coil, and a published 12.3-ounce magnet. It is specified as a 4-inch tweeter with a 4-ohm nominal impedance. The design is focused on reproducing the upper portion of a multi-speaker car-audio system's frequency range.\u003c\/p\u003e\u003cp\u003eInstall the AD36TW only with equipment appropriate for a 4-ohm tweeter and configure the system so the speaker is used within its published 2 kHz to 20 kHz range. An appropriate crossover or high-pass arrangement should be selected as part of the overall system design; no crossover is specified as included. Verify available mounting depth, cutout requirements, wiring hardware, and package contents with the seller or installer before installation.\u003c\/p\u003e","brand":"AUDIO360","offers":[{"title":"Default Title","offer_id":47970378154147,"sku":"AD36TW","price":37.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61UsGYKeH-L.jpg?v=1786151681"},{"product_id":"audio360-ad43tw-4-72-inch-full-led-super-tweeter-speaker-4-ohm-2000w-max-power-106db-sensitivity-phenolic-diaphragm-ccaw-voice-coil-for-pro-marine-audio","title":"Audio360 AD43TW 4.72\" LED Super Tweeter","description":"\u003cp\u003eThe Audio360 AD43TW is a 4.72-inch super tweeter designed to add focused high-frequency output to car and marine audio systems. It is intended for listeners building systems that need more treble presence, detail, and projection than conventional full-range speakers alone provide. Its 4-ohm nominal impedance supports integration with appropriately matched external amplification.\u003c\/p\u003e\u003cp\u003eCovering a stated 2 kHz to 18 kHz frequency range, the AD43TW is built to reproduce the upper-frequency information that helps instruments, vocals, and percussion remain distinct in a high-output system. Its 106 dB sensitivity rating indicates efficient output from relatively modest amplifier power. The result is a forward, detailed high-frequency character suited to custom audio installations.\u003c\/p\u003e\u003cp\u003eThe AD43TW uses a phenolic diaphragm and a CCAW voice coil. This material combination is specified for durable operation and responsive high-frequency reproduction. A 16.9-ounce magnet supports the tweeter assembly for stable performance.\u003c\/p\u003e\u003cp\u003eFull LED lighting is integrated into the design, adding a visual element for installations where appearance is part of the build. The lighting offers different lighting options according to the product listing. This makes the AD43TW a practical fit for custom vehicle and marine setups that combine audio upgrades with illuminated trim.\u003c\/p\u003e\u003cp\u003eUse the AD43TW as part of a properly designed multi-speaker system, rather than as a replacement for midrange or bass drivers. Pair it with compatible amplification and suitable high-frequency filtering to keep the tweeter operating within its stated frequency range. Its compact 4.72-inch format can suit custom panels, pods, and other dedicated tweeter locations where installation space allows.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4.72-Inch Super Tweeter:\u003c\/strong\u003e Adds dedicated high-frequency output in a compact speaker format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2,000W Maximum Power:\u003c\/strong\u003e Provides stated peak power-handling capacity for high-output systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Supports use with compatible car or marine amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e106 dB Sensitivity:\u003c\/strong\u003e Helps produce efficient and prominent treble output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhenolic Diaphragm:\u003c\/strong\u003e Provides the specified durable diaphragm construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull LED Lighting:\u003c\/strong\u003e Adds illuminated styling with different lighting options.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD43TW combines a phenolic diaphragm, CCAW voice coil, and 16.9-ounce magnet in a compact super-tweeter design. Its full LED treatment gives it a distinct appearance for visible custom installations. The product is specified for car and marine audio use.\u003c\/p\u003e\u003cp\u003eConfirm the available mounting space before installation; the product is listed as 4.72 inches, while the overall packaged\/product dimensions are listed as 5 x 5 x 5 inches. Connect it only to an amplifier configuration compatible with a 4-ohm speaker load, and use appropriate crossover or high-pass protection for a super tweeter. Plan LED wiring separately from speaker wiring and follow the supplied product instructions where available.\u003c\/p\u003e","brand":"AUDIO360","offers":[{"title":"Default Title","offer_id":47970378547363,"sku":"AD43TW","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61G2qkQsifL.jpg?v=1786151692"},{"product_id":"audio360-ad44tw-3-93-inch-super-tweeter-speaker-4-ohm-2200w-max-power-106db-sensitivity-pei-diaphragm-ccar-voice-coil-for-pro-car-audio","title":"Audio360 AD44TW 3.93\" Super Tweeter Speakers","description":"\u003cp\u003eThe Audio360 AD44TW is a 3.93-inch super tweeter pair designed to add dedicated high-frequency output to a car-audio system. It is suited to builds that need more presence and detail in the upper-frequency range than full-range speakers alone can provide. With a 4-ohm nominal impedance, the pair is intended for use in wired automotive audio installations.\u003c\/p\u003e\u003cp\u003eEach AD44TW is rated for up to 2200 watts maximum power, for a listed 4400-watt total maximum power rating for the pair. Its 106 dB sensitivity specification supports strong output from comparatively modest amplifier power when the system is set up correctly. The stated 1.5 kHz to 20 kHz frequency range focuses this driver on upper midrange and treble reproduction.\u003c\/p\u003e\u003cp\u003eA PEI diaphragm is used for the moving high-frequency element, while the voice coil is specified as CCAR. This material combination is intended to support consistent high-frequency reproduction in a car-audio environment. The 13-ounce magnet specification contributes to the driver assembly's structure and stability.\u003c\/p\u003e\u003cp\u003eThe AD44TW is a practical choice for enthusiasts building a louder, more detailed multi-speaker system. It can complement dedicated midrange drivers, coaxial speakers, and a properly configured amplifier system. Because it is a super tweeter, it is best used as part of a frequency-managed setup rather than as a stand-alone full-range speaker.\u003c\/p\u003e\u003cp\u003eFor a matched left-and-right installation, this listing includes two AD44TW super tweeters. Their compact 3.93-inch size can suit custom panels, doors, pillars, or other suitable locations when adequate mounting space is available. Final output and tonal balance depend on proper crossover selection, amplifier matching, and careful level setting.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.93-Inch Super Tweeters:\u003c\/strong\u003e Compact drivers dedicated to upper-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Fits common car-audio amplifier and crossover configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2200W Maximum Per Tweeter:\u003c\/strong\u003e Supports high-output system planning when properly configured.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e106 dB Sensitivity:\u003c\/strong\u003e Helps the tweeters produce strong output efficiently.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Diaphragm:\u003c\/strong\u003e Provides the specified diaphragm material for treble reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13-Ounce Magnet:\u003c\/strong\u003e Adds mass to the driver motor assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD44TW uses a PEI diaphragm and a CCAR voice coil in a compact super-tweeter format. Each driver is specified with a 13-ounce magnet and a 3.93-inch speaker size. The black, wired design is intended for automotive audio use.\u003c\/p\u003e\u003cp\u003eInstall the pair in a secure location with appropriate clearance for the mounting arrangement and wiring. Use a suitable high-pass crossover or other frequency-management method to keep low-frequency content out of the tweeters, and match the amplifier and crossover to the 4-ohm load. Confirm polarity between left and right speakers, then set gain conservatively to integrate their output with the rest of the system.\u003c\/p\u003e","brand":"AUDIO360","offers":[{"title":"Default Title","offer_id":47970378907811,"sku":"AD44TW","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61-6n0lWlnL.jpg?v=1786151702"},{"product_id":"audio360-ad48tw-5-49-x-4-72-inch-super-tweeter-speaker-4-ohm-2500w-max-power-107db-sensitivity-phenolic-diaphragm-ccaw-voice-coil-for-pro-car-and-marine-audio","title":"Audio360 AD48TW 5.49\" Super Tweeter","description":"\u003cp\u003eThe Audio360 AD48TW is a high-frequency super tweeter designed to add upper-range detail to a car or marine audio system. It is intended for listeners building systems that need dedicated treble reproduction beyond what larger speakers or subwoofers provide. The requested configuration includes two AD48TW tweeters for left- and right-channel use.\u003c\/p\u003e\u003cp\u003eEach AD48TW is rated at 4 ohms and listed with 2,500 watts maximum power handling, for 5,000 watts total maximum handling across the pair. Its 107 dB sensitivity rating indicates efficient output from comparatively modest amplifier power. The stated 2 kHz to 20 kHz frequency range focuses the driver on upper-midrange and high-frequency duties.\u003c\/p\u003e\u003cp\u003eA phenolic diaphragm is used for the sound-producing element, while the voice coil uses CCAW construction. These materials are part of the driver design specified for this model. A 15.2-ounce magnet is also listed for each tweeter.\u003c\/p\u003e\u003cp\u003eThe AD48TW is suited to systems using separate low-, mid-, and high-frequency drivers rather than as a replacement for a full-range speaker. It can complement midrange speakers and subwoofers by handling the upper portion of the audible frequency range. Its wired connection format makes it appropriate for conventional amplified car-audio speaker wiring.\u003c\/p\u003e\u003cp\u003eThis model is listed for car and marine audio applications, giving installers flexibility when selecting a high-frequency driver for a vehicle or boat system. Proper system matching remains important because the 4-ohm load must be compatible with the amplifier channel and crossover arrangement. The product is listed as a super tweeter, so it should be integrated as part of a multi-driver system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Tweeter Design:\u003c\/strong\u003e Adds dedicated high-frequency output to a multi-speaker audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with amplifier channels designed for 4-ohm speaker loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e107 dB Sensitivity:\u003c\/strong\u003e Supports efficient high-frequency output with appropriate system power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 kHz–20 kHz Response:\u003c\/strong\u003e Covers upper-midrange and treble frequencies specified for the driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhenolic Diaphragm:\u003c\/strong\u003e Uses the specified phenolic material for the diaphragm assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coil:\u003c\/strong\u003e Features a copper-clad aluminum wire voice coil design.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD48TW uses a phenolic diaphragm, CCAW voice coil, and a listed 15.2-ounce magnet. Its published overall size is 5.49 by 4.72 inches, placing it in the large-format super-tweeter category. The model is specified as a wired dynamic-driver tweeter for automotive and marine-oriented audio applications.\u003c\/p\u003e\u003cp\u003eMount the pair where their high-frequency output can be directed toward the listening area and where the 5.49 by 4.72-inch footprint can be accommodated. Connect each tweeter to an amplifier or speaker circuit compatible with a 4-ohm load, and use an appropriate crossover or high-pass arrangement so the driver operates within its listed 2 kHz to 20 kHz frequency range. Confirm available mounting clearance and system wiring before installation.\u003c\/p\u003e","brand":"AUDIO360","offers":[{"title":"Default Title","offer_id":47970379301027,"sku":"AD48TW","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61FX_9_-5SL.jpg?v=1786151714"},{"product_id":"audison-ap2mv","title":"Audison AP 2 MV 2\" Wide-Range Speakers","description":"\u003cp\u003eThe Audison AP 2 MV is a compact 2-inch wide-range speaker designed for OEM dashboard and A-pillar locations. It is intended to reproduce both midrange and high-frequency content from a single small driver, helping move the front soundstage higher in the vehicle. This makes it a practical solution for vehicles with limited factory speaker space.\u003c\/p\u003e\u003cp\u003eRather than functioning as a conventional tweeter alone, the AP 2 MV covers a broad 150 Hz to 20 kHz operating range. Its wide-band capability can reduce the need for a crossover point between separate midrange and tweeter drivers in the upper-frequency range. The result is suited to installations seeking coherent vocals, instruments, and high-frequency detail from a compact OEM-style location.\u003c\/p\u003e\u003cp\u003eThe AP 2 MV uses a 25 mm CCAW double-layer voice coil to support its 25 W continuous and 50 W peak power ratings. Its low 145 Hz resonance frequency is notable for a 50 mm driver and supports integration with a door woofer at an appropriate crossover point. With a 4-ohm nominal impedance, it is designed for use in compatible factory-replacement and aftermarket audio systems.\u003c\/p\u003e\u003cp\u003eAn aluminum cone and copper shorting ring are used to support extended high-frequency response and impedance control. The compact motor incorporates a symmetrical double-neodymium magnetic assembly for controlled excursion in a shallow package. These engineering details allow the driver to fit where a larger midrange speaker may not be practical.\u003c\/p\u003e\u003cp\u003eAudison includes a multi-tab OEM adapter intended to support direct replacement in many General Motors, Toyota, and Mercedes applications. The AP 2 MV can also be used as a midrange in a three-way system, or as a surround or center-channel speaker where space is restricted. Confirm the factory opening, mounting depth, wiring connection, and system crossover settings before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide-Range Response:\u003c\/strong\u003e Covers 150 Hz to 20 kHz from one compact driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Inch OEM Format:\u003c\/strong\u003e Fits many 50 mm dashboard and A-pillar locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25 mm CCAW Voice Coil:\u003c\/strong\u003e Supports power handling and low-frequency extension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Cone:\u003c\/strong\u003e Provides a rigid diaphragm for upper-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCopper Shorting Ring:\u003c\/strong\u003e Helps flatten impedance for extended high-frequency response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Adapter Included:\u003c\/strong\u003e Supports installation in many GM, Toyota, and Mercedes vehicles.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 2 MV combines an aluminum cone, copper shorting ring, 25 mm CCAW double-layer voice coil, and neodymium magnetic motor in a compact basket. Its symmetrical double-neodymium magnet assembly is designed for excursion control while preserving the shallow dimensions needed for OEM-oriented installations. Each component weighs 0.15 kg.\u003c\/p\u003e\u003cp\u003eUse the supplied multi-tab adapter only after confirming its fit with the specific vehicle and factory speaker location. The speaker is suited to 50 mm OEM dash or A-pillar positions, and may also be used as a three-way midrange, surround speaker, or center-channel driver. Match it to a compatible 4-ohm audio channel and configure crossover settings appropriate to the rest of the system.\u003c\/p\u003e","brand":"AUDISON","offers":[{"title":"Default Title","offer_id":47970391490723,"sku":"AP2MV","price":135.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71ObkiJbv0L.jpg?v=1786152356"},{"product_id":"audison-ap1p","title":"Audison AP1P 1.14\" Tweeter Component with Crossover","description":"\u003cp\u003eThe Audison AP1P is a 29 mm (1.14 in.) car-audio tweeter component designed to add focused high-frequency reproduction to a component speaker system. It is intended for factory-system upgrades and custom installations where fitment flexibility is important. The supplied APCX P 2T passive crossover provides the required high-pass filtering for the tweeter.\u003c\/p\u003e\u003cp\u003eWith an 8-ohm nominal impedance and 92 dB sensitivity, the AP1P is engineered for integration with compatible component-system amplification and crossover networks. Its published frequency response extends from 1.2 kHz to 25 kHz. A Tetolon fibre dome and 25 mm CCAW voice coil support detailed upper-frequency output with low moving mass.\u003c\/p\u003e\u003cp\u003eAudison uses a double-Neodymium magnetic group in the AP1P motor assembly. This design is paired with a dome profile optimized through FEM simulations for broad off-axis dispersion. That makes the tweeter well suited to locations such as factory sail panels, dash positions, and A-pillars where listening angles can vary.\u003c\/p\u003e\u003cp\u003eAIF, or Any Install Faceplate, gives the AP1P three faceplate options for different installation approaches. The OEM faceplate supports factory-style placement, while mesh and spoke grille options are intended for A-pillar applications. This flexibility helps an installer select a finish and protection level appropriate to the mounting location.\u003c\/p\u003e\u003cp\u003eThe included APCX P 2T crossover is a 12 dB\/octave high-pass network with a 4 kHz crossover point. Its selectable tweeter-level setting offers 0 dB or +3 dB adjustment for system tuning. The AP1P is a practical match for a compatible midrange or woofer section in an Audison Prima-style two-way front-stage upgrade.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e29 mm Tweeter:\u003c\/strong\u003e Compact 1.14-inch format supports flexible vehicle placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAIF Faceplates:\u003c\/strong\u003e Three faceplate styles accommodate OEM and custom installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble-Neodymium Motor:\u003c\/strong\u003e Supports extended high-frequency performance in a compact assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25 mm CCAW Voice Coil:\u003c\/strong\u003e Lightweight coil construction supports dynamic high-frequency response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTetolon Fibre Dome:\u003c\/strong\u003e Dome material is designed for accurate upper-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAPCX P 2T Crossover:\u003c\/strong\u003e Included high-pass network provides 4 kHz, 12 dB\/octave filtering.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP1P combines a Tetolon fibre dome, 25 mm CCAW voice coil, and double-Neodymium magnetic group in a compact tweeter assembly. Its faceplate system includes OEM, mesh-grille, and spoke-grille options, allowing the cosmetic finish and acoustic opening to be matched to the mounting position. Audison specifies a 22 x 2.5 mm Neodymium magnet size and a tweeter weight of 0.067 kg.\u003c\/p\u003e\u003cp\u003eUse the AP1P with its supplied APCX P 2T passive crossover rather than connecting it directly to a full-range signal. The crossover is specified as a 4 kHz, 12 dB\/octave high-pass design and provides 0 dB or +3 dB tweeter-level adjustment. Confirm available mounting clearance against the listed AP1P and faceplate dimensions, and use the supplied mounting hardware appropriate to the selected OEM, flush, or angled installation method.\u003c\/p\u003e","brand":"AUDISON","offers":[{"title":"Default Title","offer_id":47970391720099,"sku":"AP1P","price":137.04,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71UD2jVAaHL.jpg?v=1786152365"},{"product_id":"audison-av1-1ii","title":"Audison AV1-1II 1.1\" Tweeter Set","description":"\u003cp\u003eThe Audison AV1-1II is a pair of 28 mm (1.1 in.) Voce II component tweeters designed to upgrade the high-frequency range of a car audio system. It is intended for systems that need clearer treble detail, more controlled upper-frequency output, and flexible mounting options. With a 4-ohm nominal impedance, the AV1-1II is suited to appropriately configured aftermarket speaker systems.\u003c\/p\u003e\u003cp\u003eIts Hi-Res Audio certification and 1,000 to 40,000 Hz frequency-response specification support extended high-frequency playback. The larger 28 mm Tetolon soft dome is designed to provide smooth, natural treble character while maintaining useful off-axis response in vehicle cabins. This makes it a practical choice for dash, sail-panel, or A-pillar locations where listeners are not directly on-axis with the tweeters.\u003c\/p\u003e\u003cp\u003eA 28 mm CCAW voice coil is wound on an aluminum former and paired with a neodymium magnetic motor. This combination is engineered for low moving mass, thermal stability, and controlled transient response. Audison specifies a 900 Hz resonant frequency and 91 dB sensitivity for the AV1-1II.\u003c\/p\u003e\u003cp\u003eThe AV1-1II uses Audison AIF (Any Install Faceplate) technology to support different mounting approaches. Included mounting hardware includes a watch-band mount, double-angle cup, flush-mounting ring, and metal mounting spring. Mesh and spoke grille options provide additional installation and appearance flexibility.\u003c\/p\u003e\u003cp\u003eFor an active DSP-based system, Audison recommends high-pass filtering the AV1-1II as low as 1,800 Hz with a 24 dB\/octave Linkwitz-Riley slope when paired in a two-way system with a 6.5-inch woofer. When used with a smaller midrange such as the AV 3.0 II, Audison recommends a crossover point around 3,000 Hz. The tweeters can also be used as part of compatible Voce II passive or active component-system configurations.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHi-Res Audio Certified:\u003c\/strong\u003e Supports extended response up to 40 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e28 mm Tetolon Dome:\u003c\/strong\u003e Delivers smooth and natural high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coil:\u003c\/strong\u003e Helps reduce moving mass and dynamic compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Motor:\u003c\/strong\u003e Provides a compact, high-flux magnetic assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAIF Faceplate System:\u003c\/strong\u003e Supports multiple mounting and aiming options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Grade Connector:\u003c\/strong\u003e Enables convenient serviceable wiring connections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AV1-1II combines a Tetolon-fibre dome and surround with a 28 mm CCAW voice coil, aluminum former, and neodymium magnet. It does not use ferrofluid. The supplied faceplates, mounting accessories, grille options, pre-wired P\u0026amp;P cable, and Audison logo badges support a tailored installation.\u003c\/p\u003e\u003cp\u003eUse the included flush ring, watch-band mount, double-angle cup, or metal spring according to the available vehicle location and desired aiming. The tweeter provides standard terminals plus an OEM-grade two-pin connection, with a matching bare-wire pigtail included for connection by solder or mechanical crimp. Use an appropriate high-pass crossover; for active DSP systems, Audison recommends 1,800 Hz at 24 dB\/octave in a two-way alignment with a 6.5-inch woofer.\u003c\/p\u003e","brand":"AUDISON","offers":[{"title":"Default Title","offer_id":47970393096355,"sku":"AV1-1II","price":380.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/81zalMdi5RL.jpg?v=1786152424"},{"product_id":"audison-avk6sii","title":"Audison AVK6SII 6.5\" 2-Way Component Speaker Kit","description":"\u003cp\u003eThe Audison AVK6SII is a 6.5-inch, 2-way component speaker kit designed for a front-stage car audio upgrade. It pairs separate AV 6.5 S II mid-bass woofers with AV 1.0 II tweeters and dedicated passive crossover networks. The separate-driver layout allows the tweeters to be positioned higher in the cabin while the woofers fit typical door or kick-panel locations.\u003c\/p\u003e\u003cp\u003eThis kit is intended for listeners who want more controlled mid-bass, clearer vocals, and extended treble than a coaxial or factory speaker arrangement can typically provide. The 6.5-inch woofers are rated for 125 watts continuous power each and use a 36 mm CCAW voice coil. Their 50 Hz to 5.5 kHz operating range supports use as the mid-bass foundation of a two-way front stage.\u003c\/p\u003e\u003cp\u003eThe AV 1.0 II tweeters use 25.4 mm Tetolon fiber domes and are Hi-Res Audio certified with response specified to 40 kHz. Their compact form and supplied mounting hardware support flush, angled, and surface-oriented placement choices. This can be useful where factory sail panels, A-pillars, or custom tweeter locations place the listener off-axis.\u003c\/p\u003e\u003cp\u003eAudison separates the passive networks into an AVCX 2 W low-pass crossover for each woofer and an AVCX 2 T high-pass crossover for each tweeter. The woofer section uses a 6 dB\/octave low-pass network, while the tweeter section uses a 12 dB\/octave high-pass network. The crossover system is set around 3.5 kHz with the woofer Mid-Contour control off, and it provides adjustments for tweeter output and woofer mid-contour response.\u003c\/p\u003e\u003cp\u003eThe AVK6SII is suitable for a passive two-channel installation or for a system planned around bi-amplification. It includes plug-and-play speaker pigtails alongside standard speaker terminals, which can simplify serviceability and vehicle integration. For an active DSP-based installation, Audison specifies a 3 kHz, 24 dB\/octave high-pass point for the AV 1.0 II tweeter and a 70 Hz, 24 dB\/octave high-pass point for the AV 6.5 S II woofer.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Component System:\u003c\/strong\u003e Separate woofers and tweeters support more flexible front-stage placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e125 W Continuous Woofer Rating:\u003c\/strong\u003e Supports matching with appropriately powered external amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHi-Res AV 1.0 II Tweeters:\u003c\/strong\u003e Extends high-frequency response to a specified 40 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Woofer Voice Coil:\u003c\/strong\u003e A 36 mm coil supports excursion and thermal handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparate Passive Crossovers:\u003c\/strong\u003e Dedicated woofer and tweeter networks simplify component placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Response Controls:\u003c\/strong\u003e Adjust tweeter level and woofer mid-contour for the installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AV 6.5 S II woofer combines a pressed paper cone, butyl rubber surround, die-cast aluminum basket, and high-density-flux ferrite magnet assembly. Its motor includes an aluminum shorting ring to reduce inductance, while the 36 mm copper-clad aluminum voice coil is paired with a compact 61 mm mounting-depth specification. The AV 1.0 II uses a Tetolon fiber dome and AIF faceplate system with four supplied faceplates.\u003c\/p\u003e\u003cp\u003eConfirm available door clearance and the required 140.8 mm woofer mounting opening before installation; the woofer has a 165 mm outside diameter and 61 mm mounting depth. Install each AVCX 2 W and AVCX 2 T crossover in a dry, secure location and follow the labeled wiring layout for passive or bi-amplified operation. The kit includes mounting options for the tweeters, plus OEM-style two-pin pigtails that may be soldered or crimped to vehicle wiring.\u003c\/p\u003e","brand":"AUDISON","offers":[{"title":"Default Title","offer_id":47970393227427,"sku":"AVK6SII","price":440.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71ql6H74ILL.jpg?v=1786152432"},{"product_id":"cerwin-vega-cer-h7653","title":"Cerwin-Vega H7653 6.5\" 3-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega H7653 is a 6.5-inch, 3-way coaxial speaker set designed to replace compatible factory door or rear-deck speakers. Its all-in-one coaxial layout combines low-, mid-, and high-frequency drivers in each speaker, helping simplify an audio-system upgrade. It is intended for listeners seeking clearer, fuller sound from a standard 4-ohm car-audio speaker position.\u003c\/p\u003e\u003cp\u003eWith 60 watts RMS power handling and 340 watts maximum power handling, the H7653 is suited to appropriately matched factory radios or aftermarket amplification. Its 50 Hz to 20 kHz stated frequency response covers bass, vocal, and treble ranges within a compact speaker format. The 3-way arrangement is designed to add midrange detail and high-frequency definition beyond a basic single-cone factory speaker.\u003c\/p\u003e\u003cp\u003eThe H7653 uses a single 4-ohm voice coil, making it compatible with many conventional car-audio speaker outputs. An internal crossover is included to direct frequencies among the speaker's integrated drivers. This avoids the need to add a separate external crossover for the coaxial speaker assembly.\u003c\/p\u003e\u003cp\u003eIts construction includes a stamped-steel basket and ferrite ceramic magnet, with a polypropylene cone, treated-foam surround, and Mylar diaphragm listed in the manufacturer specifications. Other published product information identifies a treated red spider and a balanced PEI\/polypropylene dome tweeter. Together, these elements support a durable replacement-speaker design for everyday vehicle use.\u003c\/p\u003e\u003cp\u003eThe H7653 can be considered for vehicles with 6.5-inch speaker locations when the mounting cutout and behind-panel clearance are confirmed first. It works as a practical front-door or rear-deck upgrade and can be paired with an aftermarket head unit or amplifier matched to its 4-ohm load and RMS rating. For systems needing deeper low bass, a separate subwoofer remains the appropriate addition.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Design:\u003c\/strong\u003e Integrates woofer, midrange, and tweeter elements into each speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W RMS Handling:\u003c\/strong\u003e Supports amplifier or radio power matched to its continuous rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Load:\u003c\/strong\u003e Works with many standard car-audio speaker outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal Crossover:\u003c\/strong\u003e Routes frequencies between the integrated speaker drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped-Steel Basket:\u003c\/strong\u003e Provides a rigid mounting structure for the speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Fitment:\u003c\/strong\u003e Designed for compatible 6.5-inch door or rear-deck locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H7653 uses a stamped-steel basket, ferrite ceramic magnet, polypropylene cone, treated-foam surround, and 1-inch voice coil. Its coaxial format places the additional midrange and high-frequency drivers over the main woofer, conserving space compared with a separate component-speaker layout. The speaker includes an internal crossover and uses a single 4-ohm voice coil.\u003c\/p\u003e\u003cp\u003eBefore purchase, compare the vehicle's opening and clearance with the listed 5.7-inch (145 mm) mounting diameter and approximately 2.09-inch (53 mm) mounting depth. Mount the speaker securely to a flat baffle and seal around its frame to limit air leaks; check door-window travel before installation in a door. Use correct polarity and protect any new wiring with grommets where it passes through metal.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970396668067,"sku":"CER-H7653","price":42.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61JI4nW0_8L.jpg?v=1786152593"},{"product_id":"cerwin-vega-cer-vt1","title":"Cerwin-Vega VT1 1\" Silk Dome Tweeters","description":"\u003cp\u003eThe Cerwin-Vega VT1 is a pair of 1-inch silk dome tweeters designed to add dedicated high-frequency detail to a vehicle audio system. It is intended for listeners upgrading dull, incomplete, or damaged factory treble reproduction. The pair uses a 4-ohm design and includes external crossovers for a more complete add-on tweeter installation.\u003c\/p\u003e\u003cp\u003eSilk dome construction gives the VT1 a smooth high-frequency character intended to reproduce vocal detail, cymbals, and upper musical textures with clarity. Its specified frequency response is 91 Hz to 20 kHz, with 90 dB sensitivity measured at 1W\/1M. The tweeters are rated for 60 watts RMS and 180 watts peak power handling each.\u003c\/p\u003e\u003cp\u003eA neodymium magnet motor structure supports the compact VT1 design while providing the magnetic drive needed for high-frequency playback. Cerwin-Vega identifies the tweeter as a dynamically balanced dome design. The supplied external crossover includes tweeter protection to help manage the high-frequency signal sent to each tweeter.\u003c\/p\u003e\u003cp\u003eThe VT1 is suited to custom car-audio systems, replacement installations, and upgrades that need dedicated highs alongside compatible midrange or full-range speakers. With 4-ohm impedance per tweeter, it should be matched to an amplifier or head-unit speaker output designed for that load. Proper crossover wiring and polarity are important for balanced integration with the rest of the system.\u003c\/p\u003e\u003cp\u003eInstallation flexibility allows the tweeters to be used in surface-mount or flush-mount locations where space permits. Their compact 2.40-inch overall diameter and 0.846-inch mounting depth can suit many dash, door, or rear-deck applications. Confirm the available mounting area, clearance, and wiring path before beginning installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Silk Dome:\u003c\/strong\u003e Reproduces detailed high frequencies with a smooth tonal character.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Magnet:\u003c\/strong\u003e Supports compact, efficient tweeter motor performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W RMS Rating:\u003c\/strong\u003e Provides continuous power handling per tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches common car-audio speaker-output configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Crossovers:\u003c\/strong\u003e Direct high-frequency signal to the tweeters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Protection:\u003c\/strong\u003e Helps protect the tweeters through the included crossovers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe VT1 uses a balanced silk dome diaphragm and neodymium magnet motor structure in a compact 1-inch tweeter format. Each unit has a 2.40-inch overall diameter, 1.14-inch overall height, and 0.846-inch mounting depth. The set is supplied as a pair and does not include grilles according to the published specification.\u003c\/p\u003e\u003cp\u003eFor surface mounting, position the supplied mounting cup at the desired angle and route the speaker wire through the cup before securing the tweeter. For flush mounting, verify panel clearance and opening requirements before cutting; the installation guide calls for at least 1 inch of clearance behind the panel for the flush-mount arrangement. Connect each passive crossover input to the amplifier speaker output and its tweeter output to the corresponding VT1, observing positive and negative polarity.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970397913251,"sku":"CER-VT1","price":53.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71Fg_Puco5L.jpg?v=1786152655"},{"product_id":"gravity-audio-300w-vehicle-speaker-1-dome-tweeter-g-220tw","title":"Gravity G-220TW 1\" Silk Dome Tweeters","description":"\u003cp\u003eThe Gravity G-220TW is a 1-inch car-audio dome tweeter set designed to add dedicated high-frequency reproduction to a vehicle sound system. It is intended for listeners building or refreshing a speaker system that needs clearer treble detail beyond what larger drivers typically reproduce. The compact tweeter format makes it suitable for custom installations and component-style upgrades.\u003c\/p\u003e\u003cp\u003eIts silk-dome design is made for smooth reproduction of upper-frequency content such as vocals, cymbals, strings, and ambient details. By assigning treble information to dedicated tweeters, a system can better separate high-frequency material from midrange and bass duties. The result depends on the vehicle, mounting location, crossover setup, and supporting equipment.\u003c\/p\u003e\u003cp\u003eThe G-220TW is rated for 300 watts maximum power and uses a neodymium magnet. Neodymium allows a compact motor structure, which is useful in tweeter applications where installation space can be limited. The product is specified as a wired vehicle speaker component rather than a standalone amplified audio system.\u003c\/p\u003e\u003cp\u003eThese tweeters are a practical fit for car-audio systems using compatible midrange speakers, coaxial speakers, or subwoofers. They can be considered when replacing damaged tweeters or adding high-frequency drivers to a custom front-stage setup. Correct frequency protection and power matching should be determined by the installer or system designer.\u003c\/p\u003e\u003cp\u003eThe G-220TW is sold as a pair in retail listings, providing left- and right-channel tweeters for a stereo installation. Its 1-inch dome size supports compact placement in suitable factory locations, custom panels, or other purpose-built mounting positions. Verify available space, mounting method, and wiring requirements before purchase or installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Silk Dome:\u003c\/strong\u003e Provides dedicated high-frequency reproduction in a compact tweeter format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W Maximum Rating:\u003c\/strong\u003e Supplies a published maximum-power figure for system matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Magnet:\u003c\/strong\u003e Uses a compact magnetic motor design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Audio Application:\u003c\/strong\u003e Intended for wired car-audio speaker installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePair Configuration:\u003c\/strong\u003e Retail listings identify the product as a stereo pair.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Form Factor:\u003c\/strong\u003e Supports installation where larger speakers will not fit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe G-220TW combines a silk dome with a neodymium magnet assembly in a compact tweeter design. Retail information identifies a black and metallic appearance, while the product is classified as a vehicle tweeter. Its small 1-inch driver size is intended for installations where high-frequency drivers need minimal mounting space.\u003c\/p\u003e\u003cp\u003eUse the G-220TW as part of a compatible left\/right car-audio system, with mounting locations selected for fit and desired sound staging. Confirm the available mounting dimensions and use appropriate wiring, crossover protection, and amplifier or head-unit settings for the rest of the system. Manufacturer-confirmed impedance, crossover point, mounting cutout, mounting depth, and included mounting hardware specifications were not located.\u003c\/p\u003e","brand":"GRAVITY","offers":[{"title":"Default Title","offer_id":47970399781027,"sku":"G-220TW","price":25.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/91CjjUUmQBL.jpg?v=1786152757"},{"product_id":"gravity-audio-350w-vehicle-speaker-1-dome-tweeter-g-230tw","title":"Gravity G-230TW 1-Inch Silk Dome Tweeters","description":"\u003cp\u003eThe Gravity G-230TW is a 1-inch dome tweeter set designed to add dedicated high-frequency reproduction to a vehicle audio system. It is intended for systems where factory speakers or larger aftermarket drivers need more definition in the upper-frequency range. Adding separate tweeters can help bring vocals, percussion, and fine musical details forward in the listening experience.\u003c\/p\u003e\u003cp\u003eThis model is suited to car-audio upgrades using compatible 4-ohm speaker outputs and a properly configured high-frequency crossover. Its listed 350-watt maximum power handling gives installers a reference point when selecting and setting up an amplifier. An RMS power rating is not confirmed, so amplifier matching should not be based on the maximum-power figure alone.\u003c\/p\u003e\u003cp\u003eThe G-230TW uses a 1-inch silk dome design with a neodymium magnet, according to available product listings. A silk dome is intended for smooth high-frequency playback, while the compact neodymium motor structure helps keep the tweeter installation footprint small. The result is a dedicated treble driver for complementing midrange speakers and subwoofers.\u003c\/p\u003e\u003cp\u003eThese tweeters are listed as a pair, making them appropriate for left- and right-channel front-stage installations. They can be used in common tweeter locations such as door sail panels, dashboards, A-pillars, or custom pods when space and vehicle safety systems allow. Proper placement and aiming can affect stereo imaging and perceived treble level.\u003c\/p\u003e\u003cp\u003eFor a complete upgrade, install the G-230TW set with the appropriate passive crossover or active high-pass filtering. This protects the tweeters from low-frequency content that they are not designed to reproduce. Careful gain setting, correct polarity, and conservative equalization are important for clean integration with the rest of the system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Silk Dome:\u003c\/strong\u003e Provides dedicated high-frequency reproduction in a compact format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e350W Maximum Power:\u003c\/strong\u003e Listed maximum-power capability for system planning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Suits compatible car-audio speaker outputs and crossover networks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Magnet:\u003c\/strong\u003e Supports a compact tweeter motor assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePair Configuration:\u003c\/strong\u003e Supports left- and right-channel stereo installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Audio Design:\u003c\/strong\u003e Intended for aftermarket automotive sound-system upgrades.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe G-230TW combines a silk dome diaphragm with a neodymium magnet structure and a black metallic appearance. Its compact 1-inch format is designed for use where a dedicated tweeter can be mounted without the space requirements of a larger speaker. Available listings identify it as a wired automotive tweeter set.\u003c\/p\u003e\u003cp\u003eUse a suitable crossover or high-pass filter between the amplifier or head-unit speaker output and each tweeter. Confirm mounting depth, cutout requirements, and clearance behind the selected location before modifying a door panel, dash, or trim piece. Maintain polarity from source to crossover to tweeter, secure all wiring, and avoid excessive treble boost or amplifier gain.\u003c\/p\u003e","brand":"GRAVITY","offers":[{"title":"Default Title","offer_id":47970399813795,"sku":"G-230TW","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/91HyjKbS7zL.jpg?v=1786152759"},{"product_id":"gravity-g-245tw-1-inch-300-watts-power-with-silk-dome-flush-angle-car-tweeter-kit","title":"Gravity G-245TW 1\" Silk Dome Car Tweeter Kit","description":"\u003cp\u003eThe Gravity G-245TW is a 1-inch silk dome car tweeter kit designed to add dedicated high-frequency reproduction to a vehicle audio system. It is intended for listeners who want clearer upper-range detail than full-range door speakers alone may provide. Its 4-ohm nominal impedance supports use in many aftermarket car-audio speaker systems.\u003c\/p\u003e\u003cp\u003eThis tweeter covers a stated 2 kHz to 30 kHz frequency range and has a stated sensitivity of 94 dB. The silk dome is designed for high-frequency playback, helping reproduce details such as vocals, percussion, and ambient information. It is a suitable addition when building a more complete front-stage speaker system.\u003c\/p\u003e\u003cp\u003eGravity rates the G-245TW for up to 300 watts maximum power handling. Maximum power is not the same as continuous RMS power, so amplifier selection and crossover settings should be made carefully. A properly configured high-pass signal is important when integrating any tweeter into a car audio system.\u003c\/p\u003e\u003cp\u003eA neodymium magnet supports the compact driver design, while the stamped steel basket is specified as anti-resonant. The tweeter uses spade speaker terminals for a direct wired connection. These features support practical installation in custom and replacement speaker locations.\u003c\/p\u003e\u003cp\u003eThe included flush and swivel mounting options allow the G-245TW to be positioned for the installation layout and desired listening direction. It can be used in locations such as doors, dash panels, sail panels, or custom enclosures when space and mounting dimensions permit. Pair it with compatible midrange or full-range speakers to divide the audio spectrum across dedicated drivers.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Silk Dome:\u003c\/strong\u003e Provides dedicated reproduction of upper-frequency information.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 kHz–30 kHz Response:\u003c\/strong\u003e Covers a broad stated high-frequency operating range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e94 dB Sensitivity:\u003c\/strong\u003e Supports efficient output from compatible amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Integrates with many aftermarket car audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Magnet:\u003c\/strong\u003e Supports a compact tweeter motor structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlush and Swivel Mounts:\u003c\/strong\u003e Gives installers placement and aiming flexibility.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe G-245TW combines a silk dome diaphragm, neodymium magnet, and anti-resonant stamped steel basket. Its black finish and compact 1-inch dome format suit a range of vehicle-interior installation locations. Spade terminals provide a straightforward connection point for speaker wire.\u003c\/p\u003e\u003cp\u003eChoose either the flush-mount or swivel-mount hardware based on the panel location and preferred sound direction. Confirm available mounting clearance before cutting or drilling, and observe polarity when wiring the tweeters. Use the tweeters with an appropriate high-pass crossover or filtered signal; a crossover is not confirmed as included with this kit.\u003c\/p\u003e","brand":"GRAVITY","offers":[{"title":"Default Title","offer_id":47970399846563,"sku":"G-245TW","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/81DI8ENelRL_6f11df51-5014-4c39-9180-f5ee45053f97.jpg?v=1786152761"},{"product_id":"gravity-1-premium-dome-tweeters-350w-g-250tw","title":"Gravity G-250TW 1\" Premium Dome Tweeters","description":"\u003cp\u003eThe Gravity G-250TW is a pair of 1-inch premium dome tweeters designed to add dedicated high-frequency reproduction to a car audio system. They are intended for listeners upgrading a factory speaker setup or completing a component-style speaker installation. Their compact size supports placement in common tweeter locations where clearer upper-frequency detail is desired.\u003c\/p\u003e\u003cp\u003eWith a published 2 kHz to 30 kHz frequency response and 94 dB sensitivity, these tweeters are specified for reproducing high-frequency content such as vocals, cymbals, and spatial details. The 4-ohm impedance allows them to be considered alongside other 4-ohm car-audio speaker components. Their 350W maximum-power rating is a maximum specification rather than a stated RMS rating.\u003c\/p\u003e\u003cp\u003eThe G-250TW uses a silk dome diaphragm and a 25 mm voice coil. This combination is paired with a high-density neodymium magnet assembly, a compact magnet type commonly used where installation space is limited. Ferrofluid cooling is also specified to support thermal management at the tweeter assembly.\u003c\/p\u003e\u003cp\u003eGravity lists tweeter protection as part of the product specification. The design is also described with a two-way mounting system, giving installers a choice between flush mounting and angled mounting. This flexibility can help accommodate different panel layouts and listening-position requirements.\u003c\/p\u003e\u003cp\u003eThese tweeters are suited to systems that need a dedicated high-frequency driver rather than relying only on full-range door speakers. Use them with system components selected for their published 4-ohm impedance and high-frequency operating range. Because crossover, wiring, and amplifier specifications are not documented in the available product data, confirm those details with the seller or installer before purchase.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Silk Dome:\u003c\/strong\u003e Compact dome tweeter design for dedicated high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e350W Maximum Power:\u003c\/strong\u003e Published maximum-power specification for the pair.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches many common car-audio speaker-system configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Magnet:\u003c\/strong\u003e High-density magnet design in a compact tweeter assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFerrofluid Cooling:\u003c\/strong\u003e Specified cooling feature for the tweeter motor assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Mounting:\u003c\/strong\u003e Supports flush installation or angled mounting placement.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe G-250TW combines a silk dome, 25 mm voice coil, high-density neodymium magnet, and ferrofluid cooling in a compact 1-inch tweeter format. Gravity also lists tweeter protection and a 4-ohm impedance rating. The product is sold as a pair of tweeters.\u003c\/p\u003e\u003cp\u003eChoose either the flush or angled mounting option according to the available panel location and intended listening direction. Check the vehicle panel and mounting location before cutting or drilling, since published cutout and mounting-depth dimensions were not available. Confirm compatible crossover, wiring, amplifier, and installation-hardware requirements separately, as those items are not specified in the available product data.\u003c\/p\u003e","brand":"GRAVITY","offers":[{"title":"Default Title","offer_id":47970399879331,"sku":"G-250TW","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/9187VrVd3CL.jpg?v=1786152763"},{"product_id":"hertz-c26","title":"Hertz C26 1\" Cento Series Component Tweeters","description":"\u003cp\u003eThe Hertz C26 is a pair of 1-inch component tweeters designed to add dedicated upper-frequency reproduction to a car audio system. They are intended for systems that need clearer high-frequency detail than a full-range door speaker alone can provide. With a 4-ohm nominal impedance, the C26 is suited to compatible component-speaker and amplified-system installations.\u003c\/p\u003e\u003cp\u003eA 26 mm Tetolon dome and 20 mm voice coil form the acoustic core of the C26. This design is specified for detailed, natural reproduction through the mid-high and high-frequency range. Its published response extends from 1.8 kHz to 22.5 kHz, helping it cover the frequencies commonly assigned to a dedicated tweeter.\u003c\/p\u003e\u003cp\u003eThe C26 uses a neodymium magnet assembly, which allows a compact physical format for installation in factory-style locations or custom panels. Hertz specifies a 92 dB SPL sensitivity, supporting use with appropriately matched component systems. The tweeter is rated for 120 watts peak power when high-pass filtered at 2.5 kHz with a 12 dB-per-octave slope.\u003c\/p\u003e\u003cp\u003eIts faceplate and dispersion design are engineered to support off-axis installations, an important consideration in dashboards, sail panels, and A-pillars where speakers may not point directly at the listener. The result is a practical option for installers seeking a compact tweeter with a controlled listening-area response. The 1-inch dome format also works well as part of a front-stage upgrade using separate woofers and a suitable crossover network.\u003c\/p\u003e\u003cp\u003eThe C26 is sold as a pair and is designed for component-system use rather than direct full-range operation. It can be installed in flush or wedge-mount configurations using the available mounting arrangements. For reliable operation, pair it with a properly selected high-pass crossover and amplification that are appropriate for its 4-ohm load and published power-handling condition.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e26 mm Tetolon Dome:\u003c\/strong\u003e Provides dedicated reproduction of mid-high and high frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20 mm Voice Coil:\u003c\/strong\u003e Supports the compact 1-inch tweeter design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Magnet:\u003c\/strong\u003e Delivers magnetic strength in a small assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e92 dB SPL Sensitivity:\u003c\/strong\u003e Helps the tweeter work efficiently in matched systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.8 kHz–22.5 kHz Response:\u003c\/strong\u003e Covers a broad published high-frequency operating range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Mounting Format:\u003c\/strong\u003e Supports flush and wedge-mount installation approaches.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe C26 combines a Tetolon dome diaphragm with a neodymium magnet and compact 20 mm voice coil. Each tweeter has a 44 mm overall outside diameter, a 38.5 mm cutout requirement, and a 9.1 mm mounting depth. The compact dimensions can be useful when adapting factory tweeter locations or building custom panels.\u003c\/p\u003e\u003cp\u003eUse the C26 as part of a properly crossed-over component system; Hertz specifies its 120-watt peak rating with a 2.5 kHz high-pass filter at 12 dB per octave. Confirm that the mounting location has clearance for its 20 mm overall height and 9.1 mm mounting depth. Flush mounting is appropriate for recessed locations, while wedge mounting can help aim the tweeter toward the listening area when placement allows.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":47970402795683,"sku":"C26","price":83.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71WGMt_9RQL.jpg?v=1786152922"},{"product_id":"hertz-c26oe","title":"Hertz C26OE 1\" OEM Component Tweeters","description":"\u003cp\u003eThe Hertz C26OE is a pair of 26 mm (1 in.) component tweeters designed for OEM-location car-audio upgrades. It addresses the need to add or replace high-frequency drivers while working within factory-style mounting locations. Each tweeter uses a 4-ohm design and includes installation-focused accessories for integration.\u003c\/p\u003e\u003cp\u003eIts soft Tetolon dome is intended to reproduce upper-frequency detail with a natural character. The 20 mm voice coil and neodymium motor support controlled response through the tweeter's specified 1.8 kHz to 22.5 kHz frequency range. With 92 dB SPL sensitivity, the C26OE can be paired thoughtfully with compatible front-stage components.\u003c\/p\u003e\u003cp\u003eHertz designed the C26OE faceplate geometry using FEM-based modeling for OEM-placement installations. This approach is intended to support a more linear response when the tweeter is mounted off-axis in factory locations such as dash or pillar positions. It is a practical option for installers building a cleaner-looking upgrade without adding prominent custom pods.\u003c\/p\u003e\u003cp\u003eThe included CCX 26 cable crossover is built into the wiring to reduce the space required for an OEM upgrade. Its 6 dB-per-octave high-pass filtering helps route appropriate high-frequency content to the tweeters. The tweeters are rated for 120 watts peak when high-pass filtered at 2.5 kHz with a 12 dB-per-octave filter.\u003c\/p\u003e\u003cp\u003eUse the C26OE as part of a properly filtered front-stage upgrade rather than as a full-range speaker. Its compact dimensions, low individual speaker weight, and OEM-oriented mounting hardware make it suited to vehicles with available factory tweeter positions. Confirm the available mounting space, wiring polarity, and crossover strategy before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e26 mm Tetolon Dome:\u003c\/strong\u003e Soft-dome diaphragm supports detailed high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Magnet:\u003c\/strong\u003e Compact motor structure supports controlled transient response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Oriented Geometry:\u003c\/strong\u003e FEM-designed faceplate supports off-axis factory-location installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Cable Crossover:\u003c\/strong\u003e Built-in filtering saves space in upgrade installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches many car-audio amplifier and component-system applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Mounting Accessories:\u003c\/strong\u003e Helps adapt the tweeters to OEM-style placements.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe C26OE combines a 26 mm soft Tetolon dome with a 20 mm voice coil and neodymium magnet. Each tweeter weighs approximately 0.037 kg (0.08 lb.), helping keep the assembly compact for confined factory locations. Hertz specifies a 19 x 3 mm magnet size and a shallow 17.7 mm physical dimension.\u003c\/p\u003e\u003cp\u003eInstall the pair in suitable factory tweeter locations and use the supplied CCX 26 in-line crossover cables as intended. Observe polarity and keep the tweeters high-pass filtered; Hertz specifies the 120 W peak rating with a 2.5 kHz, 12 dB-per-octave high-pass condition. Verify vehicle-specific mounting fitment before modifying trim panels or factory wiring.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":47970402828451,"sku":"C26OE","price":83.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71Z5j7BznbL.jpg?v=1786152925"},{"product_id":"hertz-ml280-3","title":"Hertz ML280-3 1.38\" Tetolon Dome Tweeters","description":"\u003cp\u003eThe Hertz ML280-3 is a pair of Mille Legend Series component tweeters designed to reproduce the upper-frequency detail that factory speakers and basic component systems can miss. Its 35 mm (1.38 in.) Tetolon fiber dome is intended for systems where clarity, extension, and controlled dispersion are important. With a 4-ohm nominal impedance, these tweeters are suited to properly designed aftermarket car-audio installations.\u003c\/p\u003e\u003cp\u003eThis model is for listeners building or refining a premium front stage with separate midrange or woofer drivers. Its 1 kHz to 28 kHz frequency-response specification and 92 dB sensitivity support detailed treble reproduction when paired with an appropriate crossover network. The low 900 Hz resonant frequency also gives installers flexibility when designing the high-pass crossover point.\u003c\/p\u003e\u003cp\u003eHertz uses a neodymium motor optimized through FEA magnetic-flux simulations to support transient control. An extremely pure copper short-circuit ring is incorporated to support high-frequency extension. The 28 mm voice coil and 28 mm effective radiating diameter complement the compact dome design.\u003c\/p\u003e\u003cp\u003eThe ML280-3 uses a Tetolon fiber dome geometry developed to reduce distortion and improve high-frequency dispersion. Its die-cast aluminum faceplate is profiled to support frequency response and off-axis performance. The frame structure and rear acoustic chamber are derived from CNC-machined solid aluminum for a mechanically rigid assembly.\u003c\/p\u003e\u003cp\u003eFor a complete system, these tweeters should be matched with compatible midbass or midrange drivers, amplification, and a correctly configured passive or active crossover. Hertz specifies its 180-watt peak handling with a high-pass filter at 1.8 kHz and 12 dB per octave. This makes the ML280-3 a focused component for a custom system rather than a direct full-range speaker replacement.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e35 mm Tetolon Dome:\u003c\/strong\u003e Produces extended high-frequency output with a compact 1.38-inch diaphragm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Motor:\u003c\/strong\u003e Provides a compact magnetic structure for responsive operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e900 Hz Resonance:\u003c\/strong\u003e Supports flexibility when setting an appropriate high-pass crossover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCopper Short-Circuit Ring:\u003c\/strong\u003e Helps support clean extension into the upper-frequency range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Faceplate:\u003c\/strong\u003e Uses a profiled die-cast design intended to improve dispersion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigid Rear Chamber:\u003c\/strong\u003e CNC-machined aluminum construction helps control unwanted mechanical resonance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe tweeter combines a Tetolon fiber dome, neodymium magnet, die-cast aluminum faceplate, and a CNC-machined aluminum frame and rear chamber. Hertz also specifies high-density damping beneath the dome and low-density absorbing material in the rear chamber. These construction elements are designed to manage resonance and support smooth acoustic output.\u003c\/p\u003e\u003cp\u003ePlan installation around the published 53.4 mm outer dimension, 29 mm mounting dimension, and 13.5 mm depth dimension. Use a high-pass crossover at or above the manufacturer’s stated 1.8 kHz, 12 dB-per-octave power-handling condition. For best system integration, mount the pair symmetrically and match them with 4-ohm compatible amplification and complementary midrange or midbass drivers.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":47970405449891,"sku":"ML280-3","price":274.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71oeDbpEnZL.jpg?v=1786153030"},{"product_id":"hertz-mp28-3","title":"Hertz MP28-3 1.38\" Component Tweeters","description":"\u003cp\u003eThe Hertz MP 28.3 Mille Pro is a 35 mm (1.38 in.) component tweeter designed for detailed high-frequency reproduction in a car audio upgrade. It is intended for systems that need a dedicated tweeter rather than a coaxial speaker’s built-in high-frequency driver. With a 4-ohm nominal impedance and 91 dB sensitivity, it is suited to use with compatible passive crossovers and component-speaker systems.\u003c\/p\u003e\u003cp\u003eThis tweeter uses a Tetolon fiber dome and a 28 mm CCAW voice coil to keep the moving assembly light while maintaining control. Its frequency response is specified from 1 kHz to 25 kHz, supporting upper-frequency detail and dispersion for front-stage listening. The faceplate geometry is engineered to support more consistent output when the tweeter is installed off-axis, such as in factory-style dashboard or pillar locations.\u003c\/p\u003e\u003cp\u003eA double neodymium motor is used for efficient magnetic control, while the rear acoustic chamber is damped with natural-fiber non-woven material. Hertz specifies a 900 Hz resonant frequency, which supports integration with an appropriately filtered midwoofer. The supplied MPCX 2T.3 crossover uses a 12 dB\/octave high-pass network at 3.5 kHz.\u003c\/p\u003e\u003cp\u003eThe MP 28.3 is rated for up to 180 watts peak when high-pass filtered at 1.8 kHz with a 12 dB\/octave slope. For normal component-system use, the included crossover provides the specified 3.5 kHz crossover point and selectable 0 dB or -2 dB tweeter level. This makes it practical for tailoring treble output to the vehicle’s mounting position and interior acoustics.\u003c\/p\u003e\u003cp\u003eHertz includes multiple mounting accessories for flush and angled installation options. An angled support can help direct the tweeter toward the listening area when mounting on an A-pillar or dashboard. The MP 28.3 can be used as a replacement or upgrade tweeter in a properly designed passive component system, or with active processing when the installer provides suitable filtering and protection.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e35 mm Tetolon Dome:\u003c\/strong\u003e Supports detailed high-frequency output with broad off-axis dispersion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e28 mm CCAW Voice Coil:\u003c\/strong\u003e Uses copper-clad aluminum wire for a light moving assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble Neodymium Motor:\u003c\/strong\u003e Provides efficient magnetic control in a compact structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamped Rear Chamber:\u003c\/strong\u003e Helps control resonance and supports lower-frequency integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded MPCX 2T.3 Crossover:\u003c\/strong\u003e Provides 12 dB\/octave high-pass filtering at 3.5 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Tweeter Level:\u003c\/strong\u003e Allows 0 dB or -2 dB output adjustment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MP 28.3 combines a Tetolon fiber dome, ferrofluid-cooled CCAW voice coil, double neodymium magnet system, and extended rear chamber. The compact driver measures 53.4 mm across at its widest stated physical dimension and weighs 0.075 kg (0.16 lb) per speaker. Its faceplate and mounting system are designed for both cosmetic integration and useful aiming flexibility.\u003c\/p\u003e\u003cp\u003eUse the supplied MPCX 2T.3 crossover for the manufacturer-specified 3.5 kHz high-pass point and connect the tweeter according to the crossover’s marked terminals. Flush-mounting rings, an angled support, and a watchband accessory are provided for installation flexibility. Select the 0 dB or -2 dB crossover setting after listening from the driver’s seat, especially when the tweeters are mounted close to the windshield or aimed directly at occupants.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":47970405810339,"sku":"MP28-3","price":145.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71pCQ3u7oFL.jpg?v=1786153053"},{"product_id":"hertz-st25aneo-2","title":"Hertz ST25ANEO-2 1.8\" Compression Tweeters","description":"\u003cp\u003eThe Hertz ST25ANEO-2 is a pair of compact 44 mm (1.8-inch) high-efficiency compression tweeters for car-audio systems. It is designed to add focused upper-frequency output where conventional full-range speakers or midranges need dedicated treble support. The ST 25A NEO active-version design supplies the tweeters themselves for use in a properly configured active or filtered system.\u003c\/p\u003e\u003cp\u003eWith a 3 kHz to 20 kHz frequency-response specification and 107 dB SPL sensitivity, these tweeters are intended for systems that prioritize high-frequency presence and output. Their aluminum dome is lightweight for responsive high-frequency reproduction. A 4-ohm nominal impedance supports matching with compatible car-audio amplification and crossover networks.\u003c\/p\u003e\u003cp\u003eThe ST25ANEO-2 uses a 25 mm CCAR copper-clad aluminum ribbon voice coil and a neodymium motor. Hertz specifies N38 H neodymium for the motor assembly, helping keep the driver compact and light. The compression-driver format also incorporates a phase plug and loading horn optimized using FEM design methods.\u003c\/p\u003e\u003cp\u003eHertz rates each tweeter for 100 watts peak when it is high-pass filtered at 5 kHz with a 12 dB-per-octave slope. This filter requirement is important: the tweeters should not be connected directly to a full-range signal. A suitable active crossover, DSP, or passive high-pass network is needed to limit low-frequency energy.\u003c\/p\u003e\u003cp\u003eThe compact housing uses high-current screw terminals for speaker-wire connection and includes body waterproofing with anti-UV treatment. Its published dimensions should be checked against the intended custom panel, pod, or mounting location before installation. These tweeters are a practical match for an SPL-oriented multi-driver build that needs dedicated high-frequency drivers.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e44 mm Compression Driver:\u003c\/strong\u003e Compact high-efficiency tweeter format for dedicated high-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 W Peak Handling:\u003c\/strong\u003e Rated with a 5 kHz, 12 dB-per-octave high-pass filter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e107 dB SPL Sensitivity:\u003c\/strong\u003e Supports strong output with comparatively modest amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eN38 H Neodymium Motor:\u003c\/strong\u003e Provides a compact magnetic motor assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Dome:\u003c\/strong\u003e Lightweight diaphragm material for upper-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAR Voice Coil:\u003c\/strong\u003e Copper-clad aluminum ribbon coil supports thermal and mechanical capability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ST25ANEO-2 combines an aluminum dome, CCAR voice coil, neodymium magnet, and FEM-optimized phase plug\/loading horn. Hertz also specifies body waterproofing and anti-UV treatment, along with high-current screw terminals. Each component weighs 0.39 kg (0.86 lb).\u003c\/p\u003e\u003cp\u003eUse these tweeters as part of a filtered system, with a high-pass point at 5 kHz and a 12 dB-per-octave slope specified for the peak-power rating. Confirm the 57 mm, 43.5 mm, 55.5 mm, and 29.7 mm published dimensional references against the planned installation location. Pair them with compatible 4-ohm amplification, an active crossover or DSP, and suitable midrange drivers for a complete system.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":47970406629539,"sku":"ST25ANEO-2","price":203.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/51C59aw4q2L_48ddb91f-b1cc-456e-bcae-492fb6aaf86d.jpg?v=1786153093"},{"product_id":"hertz-st25kneo-2","title":"Hertz ST25KNEO-2 1.8\" Compression Tweeter Kit","description":"\u003cp\u003eThe Hertz ST25KNEO-2 is a compact 44 mm (1.8-inch) high-efficiency compression tweeter kit designed to add focused high-frequency output to a car audio system. It is intended for systems that need dedicated treble reproduction above the midrange range. With a 4-ohm nominal impedance and 107 dB sensitivity rating, it is suited to high-output speaker installations.\u003c\/p\u003e\u003cp\u003eThis kit is a practical option for enthusiasts building or upgrading an SPL-oriented system with separate midrange drivers. Its aluminium dome and horn-loaded design are engineered to reproduce upper-frequency detail from 3 kHz to 20 kHz. The compact neodymium motor helps keep the assembly lighter and more space-conscious than conventional large-magnet compression tweeters.\u003c\/p\u003e\u003cp\u003eThe ST25KNEO-2 uses a 25 mm CCAR copper-clad aluminium ribbon voice coil and an extra-light aluminium membrane. Hertz also specifies a FEM-optimized phase plug and loading horn, intended to support controlled high-frequency output. Its 100-watt peak power-handling specification applies with a 5 kHz high-pass filter at 12 dB per octave.\u003c\/p\u003e\u003cp\u003eAs the kit version of Hertz's ST 25 Neo platform, the ST25KNEO-2 includes metal mesh grilles and inline crossover filters. These included filters help support high-pass use when integrating the tweeters with compatible midrange speakers. High-current screw terminals provide a secure connection point for speaker wiring.\u003c\/p\u003e\u003cp\u003eThe tweeters fit naturally into multi-driver front-stage, door-panel, custom-pod, and show-style audio upgrades where placement and aiming can be planned carefully. Their waterproofed, anti-UV-treated body is designed for exposure to outdoor conditions without discoloration over time. Confirm mounting clearance, amplifier setup, crossover point, and polarity before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e44 mm Compression Tweeter:\u003c\/strong\u003e Compact horn-loaded design for dedicated high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 W Peak Handling:\u003c\/strong\u003e Rated with a 5 kHz, 12 dB\/octave high-pass filter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e107 dB Sensitivity:\u003c\/strong\u003e Supports strong output with modest amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Motor:\u003c\/strong\u003e Keeps the tweeter compact and lightweight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminium Dome:\u003c\/strong\u003e Extra-light membrane supports upper-frequency response to 20 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Accessories:\u003c\/strong\u003e Includes inline crossover filters and metal mesh grilles.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ST25KNEO-2 combines a neodymium N38 H motor, aluminium dome, CCAR voice coil, and FEM-optimized phase plug and loading horn. Hertz specifies body waterproofing and anti-UV treatment for durability in exposed installations. Each tweeter weighs 0.39 kg and uses high-current screw terminals.\u003c\/p\u003e\u003cp\u003eUse these tweeters in a properly filtered multi-speaker system rather than as full-range speakers. Hertz specifies the 100 W peak rating with a 5 kHz high-pass filter at 12 dB per octave, and the included inline crossover filters should be installed according to their supplied instructions. Check the 57 mm overall diameter and 29.7 mm mounting-depth dimension before choosing a mounting location.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":47970406662307,"sku":"ST25KNEO-2","price":210.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/51D_kgHOtKL.jpg?v=1786153095"},{"product_id":"hifonics-hcc35cx","title":"Hifonics HCC35CX 3.5\" 2-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Hifonics HCC35CX is a pair of 3.5-inch, 2-way coaxial car speakers designed to replace compatible factory speakers in compact dash, door, or rear-panel locations. They provide a straightforward upgrade path for vehicles whose original small speakers sound worn, dull, or limited in detail. With a 4-ohm design and 25 watts RMS handling per speaker, they are suited to factory radios and modest aftermarket amplification.\u003c\/p\u003e\u003cp\u003eA blue woven-fiber woofer cone handles the midrange, while the centrally mounted 1-inch aluminum dome tweeter reproduces upper frequencies. The stated 80 Hz to 20 kHz frequency response supports clear vocal and instrument detail across the speakers' intended operating range. Their 88 dB sensitivity helps them produce useful output from moderate power.\u003c\/p\u003e\u003cp\u003eThe HCC35CX uses a passive Butterworth crossover network to divide the signal between the woofer and tweeter. Its specified 6 kHz crossover point and 12 dB slope are intended to provide a controlled transition between the two drivers. This coaxial arrangement keeps both drivers together in a compact speaker footprint.\u003c\/p\u003e\u003cp\u003eConstruction includes butyl rubber surrounds, an epoxy-infused natural-fiber spider, and an anti-resonant stamped-steel basket. A ferrite magnet motor structure and pure copper voice coil provide the speaker's motor system. The voice coil uses a Kapton former and an overcoil cooling design to help manage heat during operation.\u003c\/p\u003e\u003cp\u003eThese speakers are a practical choice for replacing 3.5-inch factory locations where space is limited and a full component system is unnecessary. They are sold as a pair, allowing both speakers in a matched location to be upgraded together. Confirm the vehicle's opening size, available depth, mounting pattern, and wiring arrangement before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.5-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in one compact speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25W RMS Per Speaker:\u003c\/strong\u003e Matches moderate-power factory and aftermarket audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoven-Fiber Cone:\u003c\/strong\u003e Supports controlled midrange reproduction in a lightweight driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Dome Tweeter:\u003c\/strong\u003e Extends high-frequency reproduction to the stated 20 kHz limit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Butterworth Crossover:\u003c\/strong\u003e Directs frequencies between the woofer and tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOvercoil Cooling System:\u003c\/strong\u003e Helps dissipate voice-coil heat during extended listening.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe HCC35CX combines a stamped-steel basket with a ferrite magnet motor, butyl rubber surround, epoxy-infused natural-fiber spider, and braided tinsel leads. Its woofer uses a blue woven-fiber cone, while the 1-inch dome tweeter uses aluminum. No speaker grilles are included.\u003c\/p\u003e\u003cp\u003eVerify a 3.41-inch cutout and at least 1.5 inches of top-mount depth at the intended location before ordering. The speakers support spade-terminal connections or direct soldering, so vehicle-specific adapters, mounting hardware, or wiring adapters may be needed depending on the installation. Use a compatible 4-ohm amplifier or head-unit speaker output and avoid exceeding the 25-watt RMS rating per speaker.\u003c\/p\u003e","brand":"HIFONICS","offers":[{"title":"Default Title","offer_id":47970408792227,"sku":"HCC35CX","price":13.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61RnrAGKREL.jpg?v=1786153215"},{"product_id":"hifonics-hcc46cx","title":"Hifonics HCC46CX 4 x 6-Inch 2-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Hifonics HCC46CX is a pair of 4 x 6-inch, 2-way coaxial car speakers designed as a factory-speaker replacement or compact audio-system upgrade. They combine a woofer and tweeter in each speaker assembly, helping simplify installation where a 4 x 6-inch speaker location is available. With 4-ohm impedance and 40 watts RMS power handling per speaker, they are suited to compatible factory radios or appropriately matched aftermarket amplification.\u003c\/p\u003e\u003cp\u003eA 1-inch aluminum dome tweeter handles upper-frequency detail, while the lightweight blue woven fiber cone is designed for responsive midrange reproduction. The stated 80Hz-20kHz frequency response covers core mid-bass, vocal, and high-frequency content. Butyl rubber surrounds support cone movement while providing a durable connection between the cone and frame.\u003c\/p\u003e\u003cp\u003eThe HCC46CX uses a passive Butterworth crossover with a 6kHz, 12dB slope to divide frequencies between the woofer and tweeter. This integrated crossover design keeps the speaker package self-contained without requiring a separate external crossover module. Its 88dB sensitivity rating provides a useful reference point when comparing it with other replacement speakers.\u003c\/p\u003e\u003cp\u003eHifonics builds the speaker around an anti-resonant stamped steel basket and a ferrite magnet motor. A pure copper voice coil on a Kapton former is paired with an overcoil cooling system that moves air over the voice coil through the spider. The epoxy-infused natural fiber spider supports the moving assembly while contributing to the speaker's structural design.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for vehicles with suitable 4 x 6-inch mounting locations, a 5.5 x 3.84-inch cutout, and 3.0 inches of mounting depth. Spade terminals and direct-solder connection options allow installers to choose an appropriate wiring method. They can be used as a straightforward replacement pair or as part of a broader system upgrade with matched amplification and source equipment.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 x 6-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter elements in each speaker for a compact replacement format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Aluminum Dome Tweeter:\u003c\/strong\u003e Provides dedicated high-frequency reproduction within the coaxial assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue Woven Fiber Cone:\u003c\/strong\u003e Uses a lightweight cone material designed for responsive midrange performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eButyl Rubber Surround:\u003c\/strong\u003e Supports cone movement and provides durable cone-to-frame coupling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Butterworth Crossover:\u003c\/strong\u003e Uses a 6kHz, 12dB crossover slope to divide frequencies between drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOvercoil Cooling System:\u003c\/strong\u003e Promotes airflow over the voice coil through the speaker spider.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe HCC46CX uses an anti-resonant stamped steel basket, ferrite magnet motor, pure copper voice coil, and lightweight Kapton former. Its epoxy-infused natural fiber spider supports the moving components, while the butyl rubber surround and woven fiber cone complete the woofer assembly. The speakers have a black and blue finish and do not include grilles, as they are generally installed behind an existing vehicle panel or dash location.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's available opening, mounting cutout, and clearance before purchase: this model requires a 5.5 x 3.84-inch cutout and 3.0 inches of mounting depth. Connect using compatible spade terminals or direct soldering, observing correct speaker polarity. For amplified installations, select an amplifier and gain setting appropriate for the speakers' 40-watt RMS, 4-ohm rating.\u003c\/p\u003e","brand":"HIFONICS","offers":[{"title":"Default Title","offer_id":47970408824995,"sku":"HCC46CX","price":17.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71PRSWOhXhL.jpg?v=1786153217"},{"product_id":"hifonics-hcc5768cx","title":"Hifonics HCC5768CX 5x7\/6x8-Inch Coaxial Speakers","description":"\u003cp\u003eThe Hifonics Colossus Classic HCC5768CX is a pair of 5x7-inch coaxial car speakers designed to also fit many 6x8-inch factory locations. They provide a practical replacement path for worn or basic factory speakers while retaining a conventional 4-ohm load for broad car-audio compatibility. Each speaker combines a woofer and tweeter in one assembly for straightforward full-range installation.\u003c\/p\u003e\u003cp\u003eWith 65 watts RMS and 125 watts peak power handling per speaker, the HCC5768CX is suited to aftermarket head units as well as appropriately matched external amplification. Its 88 dB sensitivity supports useful output without requiring an unusually large amplifier. The specified 80 Hz to 20 kHz frequency response covers midrange and treble duties, while a subwoofer can be added for deeper low-frequency reinforcement if desired.\u003c\/p\u003e\u003cp\u003eA blue woven-fiber woofer cone is paired with a 1-inch aluminum dome tweeter to reproduce midrange detail and high-frequency content. The butyl-rubber surround supports cone movement and is selected for durability in an automotive environment. A passive Butterworth crossover directs frequencies between the woofer and tweeter for a cohesive two-way design.\u003c\/p\u003e\u003cp\u003eThe speaker motor uses a ferrite magnet, pure-copper voice coil, and Kapton former assembly. An overcoil cooling design and epoxy-infused natural-fiber spider are incorporated to support consistent operation during extended listening. Braided tinsel leads connect the moving assembly while helping maintain reliable signal transfer.\u003c\/p\u003e\u003cp\u003eFor an upgrade system, the HCC5768CX can be used as a direct-replacement pair in compatible doors, rear decks, or other factory 5x7\/6x8 locations. Its 2.13-inch top-mount depth and 8.60 by 5.56-inch cutout requirement should be checked against the vehicle before installation. Use the speakers with clean, properly set power and retain factory grilles where applicable, as grilles are not included.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5x7\/6x8 Fitment:\u003c\/strong\u003e Fits 5x7-inch openings and many 6x8-inch speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Coaxial Layout:\u003c\/strong\u003e Integrates woofer and tweeter in each speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e65W RMS Per Speaker:\u003c\/strong\u003e Supports appropriately matched factory or aftermarket power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Dome Tweeter:\u003c\/strong\u003e Handles high-frequency detail through the specified 20 kHz range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoven-Fiber Woofer Cone:\u003c\/strong\u003e Provides the main midrange and mid-bass output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eButyl-Rubber Surround:\u003c\/strong\u003e Supports cone travel with a durable surround material.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe HCC5768CX uses an anti-resonant stamped-steel basket, ferrite magnet structure, woven-fiber cone, butyl-rubber surround, and 1-inch aluminum dome tweeter. Its copper voice coil is built on a Kapton former, while the natural-fiber spider is epoxy infused. The coaxial design also incorporates a passive Butterworth crossover and braided tinsel leads.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 5x7-inch or 6x8-inch speaker and has at least 2.13 inches of mounting depth before purchase. The required cutout is 8.60 by 5.56 inches, and wiring may be connected using the speaker's spade terminals or by soldering. The package includes two speakers; no speaker grilles are included.\u003c\/p\u003e","brand":"HIFONICS","offers":[{"title":"Default Title","offer_id":47970408923299,"sku":"HCC5768CX","price":22.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71gR1KmtILL.jpg?v=1786153219"},{"product_id":"hifonics-hcc65cxs","title":"Hifonics HCC65CXS 6.5\" Shallow-Mount Coaxial Speakers","description":"\u003cp\u003eThe Hifonics HCC65CXS is a pair of 6.5-inch, 2-way coaxial car speakers designed for vehicles where mounting depth is limited. Its shallow 1.65-inch mounting depth helps make a speaker upgrade possible in many doors, dash locations, and rear-deck applications with tight clearance. The 4-ohm design is intended for use with common factory or aftermarket car-audio systems.\u003c\/p\u003e\u003cp\u003eThese speakers combine blue woven-fiber cones with butyl-rubber surrounds to support responsive midrange reproduction and durable cone movement. A 1-inch aluminum-dome tweeter handles the upper-frequency range, while the passive crossover helps divide frequencies between the woofer and tweeter. The stated frequency response is 80 Hz to 20 kHz, making this pair suited to full-range music playback rather than dedicated sub-bass duty.\u003c\/p\u003e\u003cp\u003eEach HCC65CXS speaker is rated for 65 watts RMS and 125 watts peak power handling. With an 88 dB sensitivity rating, the pair can be used with a compatible head unit or paired with an amplifier matched appropriately to its RMS rating. The 4-ohm nominal impedance supports conventional car-audio speaker wiring configurations.\u003c\/p\u003e\u003cp\u003eHifonics uses a pure-copper voice coil on a Kapton former, an epoxy-infused natural-fiber spider, and an overcoil cooling arrangement. These elements are designed to manage heat and maintain mechanical control during extended playback. The ferrite magnet motor and anti-resonant stamped-steel basket provide a compact, durable foundation for the speaker assembly.\u003c\/p\u003e\u003cp\u003eThe HCC65CXS is a practical option for replacing factory 6.5-inch speakers when a standard-depth replacement will not fit. It can serve as a front or rear full-range upgrade in a car, truck, SUV, or van, subject to vehicle-specific fitment. Protective grilles are included for exposed or custom installations, while the shallow profile can also suit locations behind factory panels.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow-Mount Profile:\u003c\/strong\u003e The 1.65-inch mounting depth helps accommodate locations with limited clearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Coaxial Design:\u003c\/strong\u003e Integrates a woofer and tweeter in each speaker for straightforward full-range installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoven-Fiber Cone:\u003c\/strong\u003e Lightweight cone material supports responsive midrange reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum-Dome Tweeter:\u003c\/strong\u003e The 1-inch tweeter extends upper-frequency playback to 20 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThermal Management:\u003c\/strong\u003e Copper voice coils, Kapton formers, and overcoil cooling help manage heat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Butterworth Crossover:\u003c\/strong\u003e A 6 kHz, 12 dB-slope network divides frequencies between the drivers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe HCC65CXS uses an anti-resonant stamped-steel basket, ferrite magnet structure, blue woven-fiber cone, butyl-rubber surround, braided tinsel leads, and an epoxy-infused natural-fiber spider. Its 1-inch aluminum-dome tweeter is mounted within the coaxial assembly. The black-and-blue Colossus Classic styling is complemented by included protective speaker grilles.\u003c\/p\u003e\u003cp\u003eConfirm both the 5.59-inch mounting cutout and 1.65-inch mounting-depth requirement before installation, including window and panel clearance in door applications. The speakers accept spade-terminal connections or direct-soldered wiring; observe correct positive and negative polarity for each speaker. They are sold as a pair and are best matched with a 4-ohm factory or aftermarket source unit, or an amplifier selected around the 65-watt RMS-per-speaker rating.\u003c\/p\u003e","brand":"HIFONICS","offers":[{"title":"Default Title","offer_id":47970408956067,"sku":"HCC65CXS","price":23.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/81JUzQgd-cL.jpg?v=1786153221"},{"product_id":"hifonics-zs5768cx","title":"Hifonics ZS5768CX 5x7\/6x8\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Hifonics ZS5768CX is a pair of 5x7\/6x8-inch two-way coaxial car speakers designed for replacing compatible factory door, rear-deck, or panel-mounted speakers. They provide a straightforward upgrade path for vehicles using this common oval speaker format. A supplied 6x8-inch adapter plate helps support installation in applicable 6x8-inch locations.\u003c\/p\u003e\u003cp\u003eEach speaker is rated for 90 watts RMS and 250 watts peak power handling at 4 ohms. With an 88 dB sensitivity rating and a 46 Hz to 20 kHz frequency response, the pair is suited to factory-radio replacement systems as well as properly matched aftermarket amplification. The coaxial layout places the tweeter within the woofer assembly to combine midrange, bass, and high-frequency reproduction in one mounting position.\u003c\/p\u003e\u003cp\u003eThe sound design combines an Alpha-Cellulose poly woofer cone with a 1-inch Neo-Mylar soft-dome tweeter. The rigid, lightweight cone is intended to support responsive midbass performance, while the soft-dome tweeter handles upper-frequency detail. A passive Butterworth crossover directs frequencies between the woofer and tweeter for a controlled transition.\u003c\/p\u003e\u003cp\u003eHifonics uses a pure-copper voice coil on a lightweight Kapton former, with an overcoil cooling arrangement that exchanges air through the spider area. The epoxy-infused natural-fiber spider is designed to balance flexibility with structural support. A ferrite magnet motor and stamped-steel basket provide the foundation for the speaker assembly.\u003c\/p\u003e\u003cp\u003eThe ZS5768CX is a practical choice for listeners upgrading worn or limited factory speakers without moving to a separate component-speaker system. Its moisture-resistant rubber surround and high-temperature adhesive support use in typical vehicle environments. Pair it with a compatible 4-ohm factory or aftermarket audio channel, while confirming vehicle-specific mounting depth, cutout, and wiring requirements before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5x7\/6x8-Inch Fitment:\u003c\/strong\u003e Fits the stated speaker size category and includes a 6x8-inch adapter plate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Coaxial Design:\u003c\/strong\u003e Integrates the woofer and tweeter into each speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90W RMS Handling:\u003c\/strong\u003e Supports 90 watts RMS and 250 watts peak per speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeo-Mylar Tweeter:\u003c\/strong\u003e A 1-inch soft-dome tweeter delivers high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlpha-Cellulose Woofer Cone:\u003c\/strong\u003e Lightweight, rigid cone material supports responsive midbass performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Butterworth Crossover:\u003c\/strong\u003e Helps transition frequencies between the woofer and tweeter.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThese speakers use an anti-resonant stamped-steel basket, ferrite magnet motor, pure-copper voice coil, Kapton former, and epoxy-infused natural-fiber spider. The woofer uses an Alpha-Cellulose cone with a moisture-resistant rubber surround and high-temperature adhesive. No speaker grilles are included, reflecting their intended use in many factory replacement locations where the vehicle already provides a grille.\u003c\/p\u003e\u003cp\u003eConfirm that your vehicle accepts 5x7-inch or 6x8-inch speakers and verify both the mounting cutout and depth before ordering. The listed chassis depth is 2.13 inches, and the quick-start guide lists a 4.92 x 7.09-inch cutout measurement. Use the included 6x8-inch adapter plate where appropriate, connect using the spade terminals or soldered connections, and match the speakers to a compatible 4-ohm audio channel.\u003c\/p\u003e","brand":"HIFONICS","offers":[{"title":"Default Title","offer_id":47970409971875,"sku":"ZS5768CX","price":18.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61MiAouC2wL.jpg?v=1786153275"},{"product_id":"hifonics-zs653","title":"Hifonics ZS653 6.5\" 3-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Hifonics ZS653 is a pair of 6.5-inch, 3-way coaxial car speakers designed for replacing compatible factory speakers or building a straightforward vehicle-audio upgrade. Its coaxial layout places the tweeter assembly within the woofer, helping combine multiple frequency ranges in a single mounting location. This makes it a practical option for vehicles with standard 6.5-inch speaker positions.\u003c\/p\u003e\u003cp\u003eWith a 4-ohm impedance, 50-watt RMS power-handling rating, and 88 dB sensitivity, the ZS653 is suited to systems using either a compatible factory radio or a properly matched external amplifier. The stated 40 Hz to 22 kHz frequency response covers bass, midrange, and high-frequency playback within the speaker’s intended operating range. Its 3-way design is intended to provide more frequency coverage than a basic single-driver replacement speaker.\u003c\/p\u003e\u003cp\u003eA 1-inch Neo-Mylar soft-dome tweeter handles upper-frequency detail, while its Kapton former is designed to be lightweight and dissipate heat efficiently. The woofer uses an Alpha-Cellulose cone for a lightweight, rigid diaphragm structure. A moisture-resistant rubber surround supports cone movement and is intended for use in typical automotive environments.\u003c\/p\u003e\u003cp\u003eHifonics uses a pure-copper voice coil with a Kapton former, plus an overcoil cooling arrangement that exchanges air through the spider area. The epoxy-infused natural-fiber spider is designed to balance flexibility with structural support. A passive Butterworth crossover manages the transition between the midrange or midbass section and tweeter element.\u003c\/p\u003e\u003cp\u003eThe ZS653 can be used as a direct-fit-style upgrade where vehicle clearance, mounting-hole dimensions, and wiring are verified before installation. Its stamped-steel basket and ferrite magnet provide a conventional full-range speaker foundation. For amplified systems, match the amplifier appropriately to the speaker's 4-ohm load and 50-watt RMS rating.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter elements in one 6.5-inch speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50W RMS Handling:\u003c\/strong\u003e Supports 50 watts RMS power handling per manufacturer specification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeo-Mylar Dome Tweeter:\u003c\/strong\u003e Provides high-frequency reproduction through a 1-inch soft-dome tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlpha-Cellulose Cone:\u003c\/strong\u003e Uses a lightweight, rigid woofer-cone material for responsive operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Butterworth Crossover:\u003c\/strong\u003e Helps transition frequencies between the woofer and tweeter elements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped-Steel Basket:\u003c\/strong\u003e Provides an anti-resonant structural frame for the speaker assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ZS653 uses an anti-resonant stamped-steel basket, ferrite magnet motor, Alpha-Cellulose woofer cone, rubber surround, epoxy-infused natural-fiber spider, and pure-copper voice coil. Its 1-inch Neo-Mylar soft-dome tweeter uses a Kapton former, while the woofer voice-coil assembly also uses a Kapton former. The speakers use spade terminals and do not include grilles according to the manufacturer listing.\u003c\/p\u003e\u003cp\u003eVerify the vehicle's speaker opening, mounting depth, and window clearance before installation. The listed cutout diameter is 5.59 inches, outside diameter is 7.01 inches, and mounting depth is 2.13 inches. Connect positive and negative speaker leads to the proper terminals, secure the wiring away from moving parts and sharp metal edges, and use vehicle-specific adapter brackets or harnesses when required.\u003c\/p\u003e","brand":"HIFONICS","offers":[{"title":"Default Title","offer_id":47970410004643,"sku":"ZS653","price":25.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71f0rHIQk7L.jpg?v=1786153277"},{"product_id":"infinity-infspkpr753t","title":"Infinity Primus 753T 0.75\" Silk Dome Tweeters","description":"\u003cp\u003eThe Infinity Primus 753T is a pair of 0.75-inch car audio tweeters designed to add dedicated high-frequency reproduction to a vehicle sound system. Its edge-driven silk dome design is intended for clear upper-frequency detail, making it a practical choice for a component-speaker installation or a tweeter replacement. The pair includes in-line crossovers to help route appropriate frequencies to the tweeters.\u003c\/p\u003e\u003cp\u003eEach Primus 753T tweeter is rated for 40 watts RMS power handling and 120 watts peak power handling. With a 91 dB sensitivity rating measured at 2.83V\/1m, the set is designed to work efficiently with compatible factory or aftermarket amplification. Its specified frequency response is 2 kHz to 20 kHz at -6 dB.\u003c\/p\u003e\u003cp\u003eThe 3\/4-inch silk dome diaphragm is edge-driven, a construction intended to reproduce the upper range with a smooth, detailed character. The compact tweeter format can be useful where a full-range speaker cannot be installed but added treble definition is desired. A 3-ohm nominal impedance should be considered when matching the tweeters with the vehicle's amplifier or head unit.\u003c\/p\u003e\u003cp\u003eIncluded in-line crossovers use a 5 kHz crossover point with a 12 dB-per-octave slope. These crossovers are an important part of the system because they direct lower frequencies away from the tweeters. Use the supplied crossover on each channel rather than wiring the tweeters as full-range drivers.\u003c\/p\u003e\u003cp\u003eThe Primus 753T package includes mounting hardware for several installation approaches, including flush, surface, and Starfish-style mounting options. This gives an installer flexibility when working with dash panels, sail panels, factory tweeter openings, or custom locations. It is suited to a system upgrade where properly placed tweeters and compatible midrange speakers are used to improve front-stage coverage.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge-Driven Silk Dome:\u003c\/strong\u003e Uses a silk dome tweeter designed for detailed high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.75-Inch Tweeters:\u003c\/strong\u003e Compact 3\/4-inch format suits many dedicated tweeter locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40W RMS Handling:\u003c\/strong\u003e Supports up to 40 watts RMS per tweeter system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120W Peak Handling:\u003c\/strong\u003e Provides a 120-watt peak power-handling specification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn-Line Crossovers:\u003c\/strong\u003e Included crossovers operate at 5 kHz with a 12 dB\/octave slope.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple Mounting Options:\u003c\/strong\u003e Flush, surface, and Starfish mounting hardware is supplied.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Primus 753T uses 3\/4-inch edge-driven silk dome tweeters and is supplied in a black finish. Its package includes threaded flush-mount adapters, locking nuts, surface-mount cups, and Starfish tweeter mounts. The mounting parts support different placement methods without requiring the installer to source basic tweeter hardware separately.\u003c\/p\u003e\u003cp\u003eFor installation, place one included in-line crossover between each tweeter and the audio system, observing speaker polarity. Confirm that the selected location has adequate clearance and that the amplifier or source unit is compatible with the 3-ohm nominal impedance. Flush mounting, surface mounting, and use of the supplied Starfish mounts should be chosen according to the vehicle's available panel space and factory tweeter location.\u003c\/p\u003e","brand":"INFINITY","offers":[{"title":"Default Title","offer_id":47970411511971,"sku":"INFSPKPR753T","price":40.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61xYTZ8S6ZL.jpg?v=1786153353"},{"product_id":"infinity-infspkrf757tus","title":"Infinity REF757T 0.75\" Edge-Driven Textile Dome Tweeters","description":"\u003cp\u003eThe Infinity REF757T is a pair of 0.75-inch car audio tweeters designed to restore clear, detailed high frequencies in an upgraded or replacement speaker system. They are a focused solution for vehicles with dull, damaged, or limited factory tweeters. The compact format and included mounting options support a range of custom and factory-location installations.\u003c\/p\u003e\u003cp\u003eEach REF757T uses an edge-driven textile dome design intended to produce smooth treble response through the upper frequency range. With a 2.5 kHz to 21 kHz frequency response, the pair is suited to handling the high-frequency portion of music rather than full-range playback. Their 93 dB sensitivity rating helps them work efficiently with appropriately matched factory or aftermarket amplification.\u003c\/p\u003e\u003cp\u003eThe tweeters are rated at 45 watts RMS and 135 watts peak each, with a 3-ohm nominal impedance. This low-impedance design is intended to help make effective use of available power in car audio systems. Passive in-line crossovers are included to direct suitable high-frequency content to the tweeters and help protect them from lower frequencies.\u003c\/p\u003e\u003cp\u003eInstallation flexibility is a key part of the REF757T package. Surface-mount, flush-mount, and Starfish mounting hardware are included, allowing the tweeters to be positioned in many dash, sail-panel, door, or factory tweeter locations. The surface-mount housing uses a ball-and-socket arrangement that can be aimed to approximately 40 degrees.\u003c\/p\u003e\u003cp\u003eThe REF757T is a practical choice for listeners building a component-style front stage or replacing factory tweeters while retaining a compatible factory radio or adding an amplifier. It can be paired with properly crossed-over midrange or full-range speakers to create a more complete frequency presentation. Fitment should be checked against the selected mounting method, available panel clearance, and the vehicle's existing wiring configuration.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.75-Inch Textile Dome:\u003c\/strong\u003e Focuses on detailed high-frequency reproduction in a compact format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge-Driven Design:\u003c\/strong\u003e Supports smooth, controlled treble response at higher output levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e45W RMS Handling:\u003c\/strong\u003e Accommodates appropriately matched factory or aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Ohm Impedance:\u003c\/strong\u003e Helps draw useful power from compatible car audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive In-Line Crossovers:\u003c\/strong\u003e Filter lower frequencies before they reach the tweeters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple Mounting Options:\u003c\/strong\u003e Includes flush, surface, and Starfish mounting hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe REF757T uses textile edge-driven dome tweeters with a compact circular profile. Its included I-Mount and Starfish hardware provides several physical installation approaches without requiring a single fixed mounting style. The package also includes Infinity logo badges, mounting screws, washers, nuts, and flush-mount hardware.\u003c\/p\u003e\u003cp\u003eUse one included passive in-line crossover for each tweeter, connecting the crossover input to the appropriate high-frequency speaker signal and its output to the tweeter. Verify polarity, available depth, cutout size, and trim-panel clearance before drilling or modifying a vehicle panel. For factory locations, the Starfish brackets can be trimmed and adapted as needed; some installations may require additional vehicle-specific mounting hardware.\u003c\/p\u003e","brand":"INFINITY","offers":[{"title":"Default Title","offer_id":47970413936803,"sku":"INFSPKRF757TUS","price":64.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61H803YbHTL.jpg?v=1786153377"},{"product_id":"jbl-jblspkcb64ctp","title":"JBL Club 64CTP 6.5\" Component Speakers With Tweeter Pods","description":"\u003cp\u003eThe JBL Club 64CTP is a 6-1\/2-inch two-way component speaker system designed for vehicle audio upgrades. It separates the woofer and tweeter so installers can place the high frequencies independently from the midbass drivers. The system includes dedicated crossovers and tweeter pods to support a more flexible installation than a conventional coaxial speaker.\u003c\/p\u003e\u003cp\u003eThis set is suited to drivers replacing factory door speakers while seeking separate tweeter placement. Its 3.0-ohm nominal impedance and 92dB sensitivity are specified for efficient operation in automotive audio systems. Power handling is rated at 70W RMS and 210W peak for the complete component system.\u003c\/p\u003e\u003cp\u003eThe 6-1\/2-inch woofers use JBL Plus One cone architecture, which increases cone area within the speaker size. Their acoustically damped polypropylene cones are UV-resistant for use in the heat and humidity of a vehicle environment. The published frequency response is 55Hz to 20kHz.\u003c\/p\u003e\u003cp\u003eSeparate tweeters help bring upper-frequency detail closer to the preferred listening position. The included external crossovers use a 5.5kHz crossover point and provide a selectable tweeter output level of 0dB or +3dB. This adjustment can help account for tweeter mounting location and cabin acoustics.\u003c\/p\u003e\u003cp\u003eThe Club 64CTP package supports several tweeter mounting approaches, including flush, surface, Starfish adapter, I-Mount, and pod installations. The dedicated pods offer angle adjustment after mounting for more controlled aiming. It is a practical choice for a component-speaker upgrade where door woofer fitment and flexible tweeter positioning are both important.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Component System:\u003c\/strong\u003e Separates the 6-1\/2-inch woofers and tweeters for flexible placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70W RMS Power Handling:\u003c\/strong\u003e Supports amplifier matching up to 70 watts RMS per system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One Cone Architecture:\u003c\/strong\u003e Provides increased cone area within the 6-1\/2-inch woofer format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cones:\u003c\/strong\u003e Acoustically damped, UV-resistant cones suit automotive environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Tweeter Level:\u003c\/strong\u003e Choose 0dB or +3dB tweeter output to suit placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Tweeter Pods:\u003c\/strong\u003e Allows post-mount tweeter aiming for different listening positions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Club 64CTP uses 6-1\/2-inch polypropylene woofers with JBL Plus One cone architecture and separate tweeters. External crossovers divide the signal at 5.5kHz, while the tweeter system includes flush-mount, surface-mount, Starfish, I-Mount, and pod hardware. Grilles, adapter rings, mounting hardware, spacers, washers, and foam gasket material are included.\u003c\/p\u003e\u003cp\u003eVerify the vehicle's speaker opening, mounting depth, and available door-panel clearance before installation. The woofer has a 158.0mm outside diameter, 127.0mm cutout diameter, and 51.5mm mounting depth. Connect each woofer and tweeter through its included crossover, then select the 0dB or +3dB tweeter level and aim the pod or I-Mount tweeter as needed.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":47970414723235,"sku":"JBLSPKCB64CTP","price":91.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61-NfmkIErL.jpg?v=1786153417"},{"product_id":"jbl-club-194t","title":"JBL CLUB-194T 3\/4\" Edge-Driven Dome Tweeters","description":"\u003cp\u003eThe JBL CLUB-194T is a pair of 3\/4-inch edge-driven dome tweeters designed to add focused high-frequency detail to a car audio system. They are suited to replacing worn factory tweeters or building a component-style speaker upgrade. The compact format supports placement in many common factory and custom locations.\u003c\/p\u003e\u003cp\u003eWith 50 watts RMS and 150 watts peak power handling, these tweeters are intended for systems using a compatible head unit or external amplifier. Their 92dB sensitivity rating at 2.83V helps them work efficiently in an automotive environment. The 3.0-ohm nominal impedance should be considered when matching them with an amplifier or crossover network.\u003c\/p\u003e\u003cp\u003eThe CLUB-194T covers a specified frequency range of 3kHz to 20kHz, concentrating on upper-midrange and treble information rather than bass. This makes it a practical companion for door, dash, or kick-panel midrange speakers that handle the lower frequencies. An included in-line crossover pigtail is supplied for each tweeter.\u003c\/p\u003e\u003cp\u003eJBL's edge-driven dome design is paired with a compact 19mm tweeter size for installations where space is limited. The package includes multiple mounting pieces so installers can choose a surface, flush, or Starfish-adapter approach. This flexibility can help retain a clean appearance when upgrading factory speaker locations.\u003c\/p\u003e\u003cp\u003eThe supplied Starfish mounts are designed for placement behind factory grilles and for varied mounting arrangements, including locations such as an A-pillar. The I-Mount hardware adds flush- and surface-mount options, with an angled flush-mount position available. Together, the included hardware supports a tailored installation without requiring every vehicle to use the same mounting method.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\/4-Inch Tweeter Size:\u003c\/strong\u003e Compact 19mm format suits many factory and custom locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge-Driven Dome Design:\u003c\/strong\u003e Designed for dedicated high-frequency reproduction in a vehicle system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50W RMS Handling:\u003c\/strong\u003e Supports power-matched head-unit or amplifier-based installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.0-Ohm Impedance:\u003c\/strong\u003e Match with compatible amplification and crossover equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarfish Mounts:\u003c\/strong\u003e Six break-off tabs support varied mounting configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI-Mount Hardware:\u003c\/strong\u003e Supports flush, surface, and angled mounting approaches.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eEach CLUB-194T uses a compact edge-driven dome tweeter assembly measuring approximately 32.5mm across and 16.8mm high. The package includes two tweeters, flush-mount cups, threaded flush-mount adapters, surface-mount cups, Starfish mounts, plastic locking nuts, spacers, washers, and screws. These parts provide several mechanical mounting choices from one product package.\u003c\/p\u003e\u003cp\u003eFor a flush I-Mount installation, JBL specifies a 1-3\/4-inch cutout and 1-inch mounting depth; the flush-mounted tweeter can be angled up to plus or minus 40 degrees. Use the supplied in-line crossover pigtails when wiring the tweeters, and observe polarity markings during connection. Confirm available mounting clearance, amplifier compatibility with a 3.0-ohm load, and suitable crossover integration before installation.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":47970415247523,"sku":"CLUB-194T","price":57.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61dG8JX_v-L.jpg?v=1786153436"},{"product_id":"kenwood-kfc-1798rs","title":"Kenwood KFC-1798RS 6-3\/4\" 2-Way Car Speakers","description":"\u003cp\u003eThe Kenwood KFC-1798RS is a pair of 6-3\/4-inch, 2-way coaxial car speakers designed to replace worn or limited factory speakers. They combine a polypropylene woofer and integrated balanced-dome tweeter to cover both bass and high-frequency playback from a single factory-style mounting location. This makes them a practical option for vehicle owners seeking a straightforward speaker upgrade without adding separate tweeter locations.\u003c\/p\u003e\u003cp\u003eWith a 4-ohm impedance, 100-watt RMS rating, and 88 dB sensitivity, these speakers can be used with compatible factory or aftermarket audio systems. Their 73 Hz to 18 kHz frequency response supports clear midrange and treble reproduction while retaining useful upper-bass output for door or rear-deck installations. An external amplifier is optional, but any connected amplifier should be matched appropriately to the speakers' power rating and impedance.\u003c\/p\u003e\u003cp\u003eThe 6-3\/4-inch woofer uses a black polypropylene cone with Kenwood's Diamond Array Pattern and a rubber surround. The cone structure is intended to reduce distortion, while the rubber surround supports long-term movement of the woofer cone. A steel basket and black-painted steel top plate and yoke complete the speaker's structural and magnetic assembly.\u003c\/p\u003e\u003cp\u003eFor upper-frequency reproduction, the KFC-1798RS uses a 1-3\/16-inch balanced-dome tweeter with a neodymium magnet. Kenwood's Sound Field Enhancer is integrated into the tweeter design to help direct high-frequency sound forward and broaden the sound field at higher frequencies. The Acoustic Sound Harmonizer controls woofer sound waves through the tweeter panel for smoother overall response.\u003c\/p\u003e\u003cp\u003eThese coaxial speakers are suited to factory-location upgrades where mounting depth and tweeter protrusion are important. Their 1-7\/8-inch mounting depth, 5-1\/2-inch cutout requirement, and low 1\/4-inch tweeter height should be checked against the vehicle's available space before installation. The package includes grilles, mounting hardware, speaker leads, and adhesive tape for installations that can use the supplied components.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6-3\/4-Inch 2-Way Design:\u003c\/strong\u003e Combines woofer and tweeter performance in one round speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W RMS Power Handling:\u003c\/strong\u003e Supports compatible aftermarket amplification and higher-output audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiamond Array PP Cone:\u003c\/strong\u003e Polypropylene woofer cone structure is designed to reduce distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced-Dome Tweeter:\u003c\/strong\u003e A 30 mm tweeter handles upper-frequency detail from the same mounting location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcoustic Sound Harmonizer:\u003c\/strong\u003e Controls woofer sound waves through the tweeter panel for smoother response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Profile Factory Fit:\u003c\/strong\u003e Low tweeter height and shallow mounting depth support many factory locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-1798RS uses a black polypropylene woofer diaphragm with Diamond Array Pattern embossing, a rubber surround, and a steel basket. Its magnetic structure includes a ferrite woofer magnet, plus a black-painted steel top plate and yoke. The balanced-dome tweeter uses a neodymium magnet and is positioned within the coaxial speaker assembly.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 6-3\/4-inch round speaker and has at least a 5-1\/2-inch cutout diameter and 1-7\/8-inch mounting depth. Check panel clearance for the 1\/4-inch tweeter height, especially behind factory grilles. Use the supplied screws, speed nuts, speaker cords, and adhesive tape where appropriate, and observe correct speaker polarity when wiring.\u003c\/p\u003e","brand":"KENWOOD","offers":[{"title":"Default Title","offer_id":47970423603363,"sku":"KFC-1798RS","price":52.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/81l6BH4sglL.jpg?v=1786153747"},{"product_id":"kenwood-kfc-6988rs","title":"Kenwood KFC-6988RS 6\" x 9\" 4-Way Car Speakers","description":"\u003cp\u003eThe Kenwood KFC-6988RS is a pair of 6 x 9-inch, 4-way full-range car speakers designed for replacing compatible factory speakers or building a higher-output vehicle audio system. They provide a broad frequency range with dedicated woofer, tweeter, and dual super-tweeter elements in each speaker assembly. This makes them a practical option for listeners who want clearer detail and fuller sound from a conventional 6 x 9-inch location.\u003c\/p\u003e\u003cp\u003eRated for 140 watts RMS and 670 watts peak power, the KFC-6988RS is suited to systems that need speakers with substantial power-handling capability. Its 4-ohm impedance supports use with many compatible car stereo and amplifier installations. With 88 dB sensitivity at 1 meter, it is engineered to produce useful output from appropriately matched power.\u003c\/p\u003e\u003cp\u003eThe 6 x 9-inch polypropylene woofer uses Kenwood's Diamond Array Pattern to help reduce distortion while reproducing midrange and bass content. A urethane surround supports the woofer assembly, while the steel basket provides a rigid mounting structure. Together, these elements are designed for reliable operation in a vehicle environment.\u003c\/p\u003e\u003cp\u003eA 1-3\/4-inch balanced-dome tweeter works with 20 mm and 12 mm ceramic super tweeters to extend high-frequency reproduction. Kenwood's Acoustic Sound Harmonizer manages woofer sound waves through the tweeter panel for a smoother response. The Sound Field Enhancer tweeter shape is designed to strengthen forward sound and widen the high-frequency sound field.\u003c\/p\u003e\u003cp\u003eThe KFC-6988RS can be used in compatible rear-deck, door, or other factory-style 6 x 9-inch speaker locations where depth and cutout requirements are met. Its low tweeter height helps support factory-location fitment, but vehicle-specific clearance should always be checked before installation. For a system upgrade, match the speakers with a properly configured 4-ohm head unit or amplifier and use clean, unclipped power.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e140W RMS Power Handling:\u003c\/strong\u003e Supports higher-powered systems when paired with compatible amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 x 9-Inch Polypropylene Woofer:\u003c\/strong\u003e Delivers full-range output from a durable PP cone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiamond Array Pattern:\u003c\/strong\u003e Helps reduce distortion for more controlled woofer performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Way Driver Design:\u003c\/strong\u003e Combines a woofer, dome tweeter, and two super tweeters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcoustic Sound Harmonizer:\u003c\/strong\u003e Helps create a smoother, more natural sound response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSound Field Enhancer:\u003c\/strong\u003e Promotes stronger forward sound and wider high-frequency dispersion.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-6988RS uses a black polypropylene woofer cone with Diamond Array Pattern, a urethane surround, and a steel basket. Its top plate and yoke are steel with a black finish, while the woofer and main tweeter use ferrite magnets. The speaker's low 1\/2-inch tweeter height is intended to aid fitment in many factory speaker locations.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle provides at least a 5-7\/8 x 8-5\/8-inch oval cutout and 3-3\/16 inches of mounting depth before installation. The included accessory set includes grilles, mounting hardware, speaker cords, and adhesive tape. Use the supplied template and hardware as appropriate, observe correct speaker polarity, and ensure the source unit or amplifier is compatible with a 4-ohm speaker load.\u003c\/p\u003e","brand":"KENWOOD","offers":[{"title":"Default Title","offer_id":47970423734435,"sku":"KFC-6988RS","price":72.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71mN8HztE1L.jpg?v=1786153755"},{"product_id":"kenwood-kfc-st01","title":"Kenwood KFC-ST01 13\/16\" Add-On Tweeters","description":"\u003cp\u003eThe Kenwood KFC-ST01 is a compact add-on tweeter designed to extend a car audio system’s high-frequency reproduction. Its 13\/16-inch PEI balanced-dome design is intended for installations where additional treble detail is needed beyond the capability or placement of existing speakers. With a 5 kHz to 25 kHz frequency-response range, it is suited to the upper-frequency portion of a properly configured speaker system.\u003c\/p\u003e\u003cp\u003eThis tweeter is a practical option for listeners upgrading factory audio or supplementing compatible aftermarket speakers. It uses a 4-ohm nominal impedance and is rated for 40 watts of input power, helping it align with many conventional car-audio speaker circuits. Its 90 dB sensitivity specification provides useful output efficiency for a compact tweeter.\u003c\/p\u003e\u003cp\u003eThe KFC-ST01 uses a PEI balanced-dome tweeter diaphragm. This driver format is engineered for high-frequency playback in a small physical package, allowing it to be positioned closer to the listening area when the installation permits. Its compact 47 x 47 mm face dimensions can support discreet placement in many custom or add-on locations.\u003c\/p\u003e\u003cp\u003eKenwood rates the KFC-ST01 at 160 watts peak power and 40 watts rated input power. The stated operating range begins at 5 kHz, so it is designed to complement speakers that handle the lower and midrange frequencies. System power, impedance, and high-frequency signal routing should be matched appropriately during installation.\u003c\/p\u003e\u003cp\u003eFor a focused system upgrade, the KFC-ST01 can be used where a small dedicated tweeter is preferred over replacing larger door or dash speakers. Kenwood lists a 2-meter cord and bracket among the supplied accessories, supporting an add-on mounting approach. It is a straightforward choice for vehicle owners building or refreshing a component-style high-frequency stage.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e13\/16-Inch Tweeter:\u003c\/strong\u003e Compact size for dedicated high-frequency installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Balanced Dome:\u003c\/strong\u003e Designed for clear upper-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40W Rated Input:\u003c\/strong\u003e Supports appropriately matched car-audio power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e160W Peak Power:\u003c\/strong\u003e Handles short-duration musical peaks within specification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches common car-audio speaker circuit designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 kHz–25 kHz Response:\u003c\/strong\u003e Covers the upper-frequency range for added detail.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-ST01 centers on a 13\/16-inch PEI balanced-dome tweeter driver in a compact 47 mm-wide, 47 mm-high housing. Its specified overall depth is 27.9 mm, and each tweeter has a listed mass of 0.064 kg. The small form factor is suited to installations that need a dedicated high-frequency driver without the footprint of a larger speaker.\u003c\/p\u003e\u003cp\u003eKenwood lists a 2-meter cord and mounting bracket as included accessories. Confirm available mounting clearance before installation, especially the 27.9 mm depth, and use a system configuration that directs suitable high-frequency content to the tweeter. Match the 4-ohm impedance and 40-watt rated input specification with compatible audio equipment and wiring practices.\u003c\/p\u003e","brand":"KENWOOD","offers":[{"title":"Default Title","offer_id":47970424029347,"sku":"KFC-ST01","price":31.08,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/81SRpIEzIeL.jpg?v=1786153769"},{"product_id":"mb-quart-xk2-106","title":"MB Quart XK2-106 2.75\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe MB Quart XK2-106 is a compact pair of 2.75-inch coaxial 2-way speakers for car audio and powersports applications. It is designed for installations where available speaker space is limited but a full-range speaker upgrade is still needed. The package includes two speakers for use in a matched left\/right or custom-system installation.\u003c\/p\u003e\u003cp\u003eIts small footprint makes the XK2-106 suited to compact factory locations, custom panels, and other space-conscious vehicle audio projects. The 4-ohm nominal impedance supports use with compatible car-audio receivers or amplifiers. Before purchasing, confirm available mounting space and the load capability of the audio source.\u003c\/p\u003e\u003cp\u003eThe XK2-106 is rated for 70 watts RMS and 140 watts maximum power handling. Its published frequency response spans 55 Hz to 22 kHz, covering bass, midrange, and high-frequency content within a compact coaxial format. A 92 dB sensitivity rating supports efficient output when matched with an appropriate audio system.\u003c\/p\u003e\u003cp\u003eA black aluminum dome tweeter is integrated into the coaxial speaker design to reproduce high-frequency detail from the same mounting location as the main driver. The speaker uses a steel basket for structural support. This combination is intended for vehicle environments where compact packaging and durable construction are important.\u003c\/p\u003e\u003cp\u003eFor a simple compact upgrade, the XK2-106 can be used where a small full-range speaker is required in a car or powersports audio system. Its coaxial 2-way layout keeps the woofer and tweeter together rather than requiring separate tweeter locations. Pair it with compatible wiring, mounting hardware, and a source unit or amplifier that is suitable for 4-ohm speakers.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.75-Inch Size:\u003c\/strong\u003e Fits compact speaker locations and custom installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoaxial 2-Way Design:\u003c\/strong\u003e Combines main-driver and tweeter output in one speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70W RMS Handling:\u003c\/strong\u003e Supports continuous-power system matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e140W Maximum Handling:\u003c\/strong\u003e Provides published peak power capacity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Aluminum Dome Tweeter:\u003c\/strong\u003e Handles the speaker's high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteel Basket:\u003c\/strong\u003e Provides a rigid foundation for the speaker assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe XK2-106 combines a black aluminum dome tweeter with a steel basket in a compact coaxial speaker assembly. The 2-way layout places the high-frequency element within the same speaker structure as the primary driver. This design helps simplify placement where there is room for only one small speaker location.\u003c\/p\u003e\u003cp\u003eMeasure the factory opening, mounting depth, cutout, and panel clearance before ordering, as those dimensions are not published in the confirmed product information. Use suitable mounting hardware and connect each speaker with correct polarity to a compatible 4-ohm receiver or amplifier channel. The pair is intended for car and powersports audio installations; confirm that the chosen location is appropriate for the vehicle and installation conditions.\u003c\/p\u003e","brand":"MB QUART","offers":[{"title":"Default Title","offer_id":47970426781859,"sku":"XK2-106","price":13.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71z9SZhci0L.jpg?v=1786153828"},{"product_id":"memphis-mjpt25","title":"Memphis MJPT25 1\" MOJO Pro Bullet Tweeters","description":"\u003cp\u003eThe Memphis MJPT25 is a pair of 1-inch MOJO Pro bullet tweeters designed to add dedicated high-frequency output to a vehicle audio system. They are suited to systems that need more vocal presence, cymbal detail, and upper-frequency projection than factory speakers can provide. With a 4-ohm load and high 105 dB sensitivity, these tweeters are intended for high-output aftermarket applications.\u003c\/p\u003e\u003cp\u003eEach MJPT25 tweeter is rated for 100 watts RMS and 200 watts peak power handling. This power capability makes the pair appropriate for use with a properly matched external amplifier or a high-powered multi-channel system. Their 1,500-20,000 Hz frequency response focuses performance on the upper midrange and treble range.\u003c\/p\u003e\u003cp\u003eThe tweeters use aluminum dome diaphragms and a neodymium magnet motor structure. A billet phase plug is incorporated into the bullet-style design. This construction supports a compact high-efficiency format for installations where strong high-frequency output is a priority.\u003c\/p\u003e\u003cp\u003eThe MJPT25 uses a rear-mount threaded body design that allows the mounting surface to be secured between the threaded trim ring and mounting collar. Its compact 1-inch, 25 mm driver size works well in custom panels, doors, dash locations, motorcycle fairings, and other suitable speaker pods. A 1.69-inch mounting cutout is specified for installation.\u003c\/p\u003e\u003cp\u003eFor system integration, the included capacitors provide a basic first-order high-pass filter when another crossover is not being used. This helps protect the tweeters from low-frequency content that they are not designed to reproduce. Pair the MJPT25 with compatible midrange speakers, an appropriate crossover strategy, and amplifier power matched to its RMS rating.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Aluminum Dome:\u003c\/strong\u003e Provides dedicated high-frequency reproduction in a compact format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W RMS Rating:\u003c\/strong\u003e Supports use in properly matched amplified systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e105 dB Sensitivity:\u003c\/strong\u003e Delivers strong output with efficient power use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Fits many aftermarket amplifier and crossover configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBillet Phase Plug:\u003c\/strong\u003e Forms part of the durable bullet-tweeter design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThreaded Rear Mount:\u003c\/strong\u003e Simplifies secure mounting through a prepared panel.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MJPT25 combines an aluminum dome, billet phase plug, neodymium magnet, and gold-plated compression terminals in a compact bullet-tweeter assembly. Its threaded body, trim ring, and mounting collar are designed to secure the tweeter from the rear of the mounting surface. Grilles are not included.\u003c\/p\u003e\u003cp\u003ePlan for a 1.69-inch cutout and approximately 1.5 inches of mounting depth, while confirming clearance behind the mounting panel before drilling. Connect speaker wiring to the compression terminals, observing polarity, and use the included inline capacitor on the positive lead if no other suitable high-pass crossover is installed. The terminals accept up to 16-gauge speaker wire.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":47970429075619,"sku":"MJPT25","price":89.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/81kUsCMVeyL.jpg?v=1786153951"},{"product_id":"memphis-mjpt35","title":"Memphis MJPT35 1.4\" MOJO Pro Bullet Tweeters","description":"\u003cp\u003eThe Memphis MJPT35 is a pair of 35 mm (1.4-inch) MOJO Pro bullet tweeters designed to add dedicated high-frequency output to a vehicle or powersports audio system. It is intended for installations where conventional full-range speakers need added treble presence and projection. With a 4-ohm nominal impedance, the pair can be planned into compatible amplified or crossover-based systems.\u003c\/p\u003e\u003cp\u003eThese tweeters are aimed at listeners building a high-output component setup, including car, motorcycle-fairing, and side-by-side applications. Their high-efficiency design supports strong output from a compact driver. The 108 dB sensitivity specification helps them complement efficient midrange speakers in a MOJO Pro-style system.\u003c\/p\u003e\u003cp\u003eThe MJPT35 is rated for 125 watts RMS and 250 watts peak power handling. That rating makes proper amplifier gain setting and frequency management important when integrating the tweeters into a system. Use components and wiring appropriate for a 4-ohm high-frequency speaker circuit.\u003c\/p\u003e\u003cp\u003eMemphis equips the MJPT35 with a neodymium magnet to keep the tweeter assembly compact. A billet phase plug is part of the driver design, while gold-plated compression terminals provide a secure speaker-wire connection. The threaded body mounting design is intended to simplify installation in custom panels and other suitable mounting locations.\u003c\/p\u003e\u003cp\u003eThe MOJO Pro platform is described by Memphis as water-resistant and suitable for demanding outdoor-oriented audio applications. The MJPT35 is sold as a pair, making it appropriate for left- and right-channel placement. It can be used as part of a new component build or as a high-frequency upgrade alongside compatible midrange drivers and amplification.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e35 mm Bullet Tweeters:\u003c\/strong\u003e Compact dedicated drivers for high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e125W RMS Rating:\u003c\/strong\u003e Supports amplifier matching for sustained playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible car audio speaker channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e108 dB Sensitivity:\u003c\/strong\u003e Efficient design suited to high-output systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBillet Phase Plug:\u003c\/strong\u003e Integrated element in the bullet-tweeter design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThreaded Body Mount:\u003c\/strong\u003e Helps simplify secure custom-panel installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MJPT35 uses a compact neodymium-magnet motor structure, billet phase plug, and gold-plated compression terminals. Its threaded-body format is designed for a clean, secure mounting approach. Memphis lists the product without grilles.\u003c\/p\u003e\u003cp\u003eAllow for the specified 1.5-inch mounting depth when selecting a location, and confirm clearance behind the panel before drilling. Install the pair as left and right high-frequency channels in a compatible 4-ohm system, with amplifier output and crossover setup selected to suit the 125-watt RMS rating. The water-resistant MOJO Pro design makes it suitable for vehicle and powersports-oriented installations where exposure can be a consideration.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":47970429108387,"sku":"MJPT35","price":43.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61iJ4evzCeL.jpg?v=1786153953"},{"product_id":"memphis-msa1v","title":"Memphis MSA1V 1\" Aluminum Dome Tweeters","description":"\u003cp\u003eThe Memphis MSA1V is a pair of 1-inch aluminum dome tweeters designed to add dedicated high-frequency output to a car audio system. They are suited to listeners replacing worn factory tweeters or building a component-style speaker arrangement. The compact design helps place treble reproduction where it can improve front-stage focus.\u003c\/p\u003e\u003cp\u003eEach MSA1V uses an aluminum dome diaphragm intended for clear, detailed high-frequency reproduction. With an 88 dB sensitivity rating and a published 75-watt RMS, 150-watt peak power rating, these tweeters are designed for systems with appropriately matched amplification. They can be used as part of a balanced upgrade when paired with compatible midrange or midbass speakers.\u003c\/p\u003e\u003cp\u003eInstallation flexibility is a central feature of the MSA1V package. The tweeters support angle, flush, and surface-mount configurations, allowing installers to select a placement that suits the vehicle and desired listening position. This makes them practical for doors, sail panels, dash locations, or custom panels where space and aiming requirements vary.\u003c\/p\u003e\u003cp\u003eTwo-way passive crossovers are included to support proper frequency division in a compatible component system. Using the supplied crossovers helps route the appropriate signal range to the tweeters rather than sending them a full-range signal. This simplifies integration with compatible speaker wiring and amplification.\u003c\/p\u003e\u003cp\u003eThe MSA1V has a shallow published mounting depth of 0.6875 inch, helping it fit locations with limited rear clearance. A 54 mm, or 2.125-inch, mounting-hole template is published for this model. Grilles are included, and the tweeters are sold as a pair for a matched left and right installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Aluminum Dome:\u003c\/strong\u003e Dedicated tweeter design for detailed high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W RMS Rating:\u003c\/strong\u003e Supports power matching with compatible amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Mount Design:\u003c\/strong\u003e Supports angle, flush, and surface installation methods.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Crossovers:\u003c\/strong\u003e Included two-way crossovers aid component-system integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow Mounting Depth:\u003c\/strong\u003e Requires only 0.6875 inch of published depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Grilles:\u003c\/strong\u003e Provides protective covers for installed tweeters.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MSA1V uses a 1-inch aluminum dome tweeter design with a published 13-ounce magnet size. Its compact form supports multiple mounting styles without changing the tweeter model. The pair includes grilles and is specified with a 2-year warranty.\u003c\/p\u003e\u003cp\u003eChoose flush, surface, or angle mounting based on available panel depth and the desired tweeter direction. Confirm the published 0.6875-inch mounting depth and 2.125-inch mounting-hole template before modifying a panel. Connect the tweeters through the included two-way passive crossovers in a compatible system and match power to the published rating.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":47970433335459,"sku":"MSA1V","price":73.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71Q-cl_rsoS.jpg?v=1786153992"},{"product_id":"memphis-msckit","title":"Memphis MSCKIT MSeries Coaxial-to-Component Conversion Kit","description":"\u003cp\u003eThe Memphis MSCKIT is a conversion accessory for compatible Memphis MSeries coaxial speakers. It allows the center-mounted tweeters to be removed from the woofers and mounted separately. This changes the speaker layout from a coaxial arrangement to a component-style arrangement without replacing the existing speaker pair.\u003c\/p\u003e\u003cp\u003eThis kit is intended for installers and listeners who want more flexibility in tweeter placement. Separating the tweeters from the woofer locations can help tailor the soundstage and imaging to the vehicle and installation. It is designed for use with MSeries speakers that have removable center tweeters.\u003c\/p\u003e\u003cp\u003ePhase plugs take the place of the removed center tweeters in the speaker cones. Memphis supplies phase plugs sized to accommodate MS speakers across the MSeries range. The kit supports listed convertible speaker models including MS57V, MS60V, MS62V, and MS69V.\u003c\/p\u003e\u003cp\u003eFor tweeter placement, the MSCKIT includes both surface-mount and flush-mount cup options. The surface-mount hardware provides an external mounting approach, while the flush-mount hardware supports a more integrated panel installation. An angled mounting configuration is also shown in the included mounting instructions.\u003c\/p\u003e\u003cp\u003eOne MSCKIT is designed to convert one pair of MSeries speakers. It contains the phase plugs, tweeter mounting cups, associated mounting pieces, and specified screws only. Speakers and tweeters are not included, so this kit is best used as an upgrade path for an existing compatible MSeries speaker set.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMSeries Conversion:\u003c\/strong\u003e Changes compatible MSeries coaxial speakers into a component-style configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase Plug Set:\u003c\/strong\u003e Replaces the center tweeter after it is removed from the woofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface-Mount Cups:\u003c\/strong\u003e Includes two cups for externally mounted tweeter placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlush-Mount Cups:\u003c\/strong\u003e Includes two cups for recessed tweeter mounting in a panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple Mounting Styles:\u003c\/strong\u003e Supports surface, flush, and angled tweeter mounting approaches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-Pair Coverage:\u003c\/strong\u003e One kit is intended to convert one pair of MSeries speakers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MSCKIT is a purpose-built mounting and conversion hardware package rather than a speaker system. Its parts include phase plugs, front casings, bases, retaining rings, and installation screws for the supported mounting configurations. The separate cup styles let an installer select a tweeter position that suits the vehicle panel and system layout.\u003c\/p\u003e\u003cp\u003eInstall by removing the center tweeter from a compatible MSeries speaker, fitting the applicable phase plug, and mounting the tweeter in the selected cup assembly. Surface mounting uses the supplied cup hardware on a panel, while flush mounting uses a panel opening and retaining ring. Follow the MSeries speaker instructions for component-system wiring and confirm adequate mounting clearance before modifying vehicle panels.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":47970433368227,"sku":"MSCKIT","price":18.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61nAe4Z3dPL.jpg?v=1786153994"},{"product_id":"memphis-prx10","title":"Memphis PRX10 1\" PEI Dome Car Tweeters with Crossovers","description":"\u003cp\u003eThe Memphis PRX10 is a pair of 1-inch car audio dome tweeters designed to add high-frequency detail to a factory or aftermarket sound system. They are intended for vehicles where existing speakers lack clarity in vocals, cymbals, and other upper-frequency information. With a compact format and multiple mounting options, they can be used in many dash, door, sail-panel, or custom-install locations.\u003c\/p\u003e\u003cp\u003eThese tweeters use PEI dome diaphragms and are rated for 50 watts RMS and 100 watts peak power. Their 4-ohm impedance supports integration with many common car audio amplifiers and speaker systems. The 3,200-20,000 Hz frequency response focuses performance on the upper range where tweeters are most effective.\u003c\/p\u003e\u003cp\u003eA multi-direction pivot tweeter system allows the listening angle to be adjusted after installation. This can help direct high frequencies toward the listening area instead of firing away from occupants. The result is a more deliberate installation approach when replacing factory tweeters or building a component-style system.\u003c\/p\u003e\u003cp\u003eThe PRX10 package includes separate external crossovers to route appropriate frequencies to the tweeters. This helps protect the tweeters from lower-frequency content that they are not designed to reproduce. The included quick-slide wire connections and mounting hardware support a cleaner installation process.\u003c\/p\u003e\u003cp\u003eThese Memphis Power Reference tweeters are suited to listeners upgrading dull or damaged factory high-frequency drivers, as well as installers adding dedicated tweeters to a compatible speaker system. Flush-mount and angled surface-mount hardware allow placement choices based on the vehicle and desired aiming position. They can be paired with compatible full-range speakers and an appropriately configured amplifier or factory system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch PEI Dome:\u003c\/strong\u003e Produces dedicated high-frequency output in a compact format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50W RMS Handling:\u003c\/strong\u003e Supports systems with up to 50 watts RMS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Integrates with many car audio speaker circuits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Crossovers:\u003c\/strong\u003e Direct appropriate frequencies to the tweeters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePivoting Tweeter Design:\u003c\/strong\u003e Allows aiming toward the listening area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple Mounting Options:\u003c\/strong\u003e Includes flush and angled surface-mount hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PRX10 uses a 1-inch PEI dome tweeter design with a compact 0.75-inch listed mounting depth and a 0.75-ounce magnet. Its pivoting assembly is designed to make aiming more flexible than a fixed-position tweeter. The package includes flush-mount housings, retaining rings, and angled surface-mount housings for different installation approaches.\u003c\/p\u003e\u003cp\u003eFor installation, mount the tweeters high in the vehicle when practical and aim them toward the listeners for more direct high-frequency delivery. Connect each tweeter through its included crossover rather than wiring it directly to a full-range output. Confirm available mounting depth, cutout space, wiring polarity, and system power before installation; factory locations may require vehicle-specific adaptation.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":47970434023587,"sku":"PRX10","price":44.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71UFtq4ewTL.jpg?v=1786154033"},{"product_id":"memphis-prx410","title":"Memphis PRX410 4x10\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Memphis PRX410 is a pair of 4x10-inch, 2-way coaxial car speakers designed as a direct-size upgrade for many factory speaker locations. It gives drivers a practical way to replace aging OEM speakers while retaining a compact 4x10-inch footprint. With 50 watts RMS power handling per speaker, the pair is suited to factory-radio upgrades or moderate-power aftermarket systems.\u003c\/p\u003e\u003cp\u003eThese speakers combine a full-range woofer and a centrally mounted tweeter in one assembly. The graphite-reinforced polypropylene cone is designed to reproduce midrange and upper-bass information, while the PEI dome tweeter handles higher frequencies. This coaxial layout helps simplify installation where a separate component-speaker system is not needed.\u003c\/p\u003e\u003cp\u003eThe PRX410 uses a multi-direction pivot tweeter system, allowing the tweeter to be aimed toward the listening area when installation space permits. This can help tailor high-frequency direction in dash, rear-deck, or other factory 4x10-inch locations. An integrated 6 dB tweeter crossover supports proper signal routing to the tweeter.\u003c\/p\u003e\u003cp\u003eWith a 4-ohm impedance and 89 dB sensitivity, the PRX410 is compatible with many conventional car-audio speaker applications. Its 120 Hz to 20 kHz listed frequency response focuses it on clear vocal, instrument, and high-frequency reproduction. For a system that needs deeper low bass, it can be paired with a dedicated subwoofer.\u003c\/p\u003e\u003cp\u003eThe Power Reference Series design balances factory-location fitment with upgrade-oriented materials and adjustable treble dispersion. A 13-ounce magnet supports the speaker motor structure, while the butyl rubber surround is intended for durability during regular use. Included grilles provide an option for custom or exposed speaker installations.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4x10-Inch Coaxial Format:\u003c\/strong\u003e Fits many factory-style 4x10-inch speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50W RMS Power Handling:\u003c\/strong\u003e Supports moderate aftermarket amplifier or radio power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Dome Tweeter:\u003c\/strong\u003e Reproduces high-frequency detail in a compact assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePivoting Tweeter System:\u003c\/strong\u003e Allows directional adjustment of high-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated 6 dB Crossover:\u003c\/strong\u003e Directs high frequencies to the tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with many factory and aftermarket systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PRX410 uses a graphite-reinforced polypropylene cone, a butyl rubber surround, and a PEI dome tweeter. Its black Power Reference styling keeps the appearance understated when used behind factory panels or with the included grilles. The 2-way coaxial construction places the woofer and tweeter in one speaker frame.\u003c\/p\u003e\u003cp\u003eConfirm both the vehicle's factory opening and available mounting clearance before ordering. Memphis lists a 2.5-inch mounting depth; the speaker should be wired with correct polarity and powered within its 50-watt RMS rating. The pivot tweeter may be aimed toward the listening position where panel clearance allows, and a subwoofer can be added if deeper bass is desired.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":47970434318499,"sku":"PRX410","price":68.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/819g6CaNenL.jpg?v=1786154050"},{"product_id":"memphis-prx46","title":"Memphis PRX46 4x6\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Memphis PRX46 is a pair of 4x6-inch, 2-way coaxial car speakers designed for replacing or upgrading compatible factory speaker locations. Its compact format helps address the limited space often found in dash, door, or rear-deck 4x6-inch applications. Each speaker combines a woofer and tweeter in one assembly for straightforward full-range speaker replacement.\u003c\/p\u003e\u003cp\u003eWith 30 watts RMS and 60 watts peak handling per speaker, the PRX46 is suited to modest-power car audio systems. Its 4-ohm impedance supports use with compatible factory or aftermarket audio equipment. The 86 dB sensitivity rating and 125 Hz to 20 kHz frequency response define its published operating specifications.\u003c\/p\u003e\u003cp\u003eThe speaker uses a polypropylene woofer cone with a polyurethane surround. This material combination is intended to provide a durable moving assembly for midrange and upper-bass reproduction. A PEI dome tweeter handles higher-frequency content within the coaxial design.\u003c\/p\u003e\u003cp\u003eA multi-direction pivot tweeter system lets the installer aim the tweeter during installation. This can be useful when the speaker location is off-axis from the listening position. The integrated 6 dB tweeter crossover is designed to direct appropriate frequencies to the tweeter.\u003c\/p\u003e\u003cp\u003eThe PRX46 is part of the Memphis Audio Power Reference speaker line and can be used as a focused factory-speaker replacement or as one part of a broader vehicle audio upgrade. Its 2.125-inch mounting depth should be checked against the available depth behind the intended mounting surface. Installation hardware and short speaker leads are included, while grilles are not included.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4x6-Inch Coaxial Format:\u003c\/strong\u003e Combines woofer and tweeter in a compact speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30W RMS Per Speaker:\u003c\/strong\u003e Supports compatible moderate-power factory or aftermarket systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePivoting PEI Dome Tweeter:\u003c\/strong\u003e Allows high-frequency output to be aimed during installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cone:\u003c\/strong\u003e Provides a durable cone material for full-range playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolyurethane Surround:\u003c\/strong\u003e Supports controlled cone movement and durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated 6 dB Crossover:\u003c\/strong\u003e Routes high-frequency content to the tweeter.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PRX46 uses a black-on-black M-Cone appearance, a polypropylene woofer cone, polyurethane surround, PEI dome tweeter, and an 11-ounce magnet. Its 2-way coaxial layout places the tweeter within the woofer assembly, reducing the need for separately mounted external tweeters. Grilles are not included.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's 4x6-inch speaker opening, mounting pattern, and available 2.125-inch mounting depth before ordering. The package includes two speakers, two 12-inch speaker leads, eight 1-inch screws, eight speed clips, and a user manual. For amplified systems, match the amplifier setup appropriately to the speakers' 4-ohm impedance and 30-watt RMS-per-speaker rating.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":47970434351267,"sku":"PRX46","price":50.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/715Vhu4JaIL.jpg?v=1786154053"},{"product_id":"memphis-prx5-1","title":"Memphis PRX5 5.25\" Speakers + PRX60C 6.5\" Components","description":"\u003cp\u003eThis speaker package combines Memphis Audio PRX5 5.25-inch coaxial speakers with the PRX60C 6.5-inch oversized component speaker set. It is intended for vehicles that use these two speaker sizes and need an upgrade from factory-installed speakers. The package provides separate front-stage component hardware alongside a pair of compact coaxial speakers for additional factory-location replacement options.\u003c\/p\u003e\u003cp\u003eThe PRX60C is a 2-way component system with separate 6.5-inch mids, separate 1-inch poly dome tweeters, and external crossovers. Separating the tweeters from the midrange drivers allows the installer to place high frequencies independently of the door speakers where the vehicle layout permits. The PRX5 is a 2-way coaxial design, combining its PEI dome tweeter and woofer in each 5.25-inch speaker.\u003c\/p\u003e\u003cp\u003eBoth speaker models use a 4-ohm nominal impedance for compatibility with typical car-audio speaker channels. The PRX60C is rated at 50 watts RMS and 100 watts peak, while each PRX5 is rated at 30 watts RMS and 60 watts peak. Their respective 88 dB and 87 dB sensitivity ratings make them practical choices for factory-radio replacement systems or appropriately power-matched aftermarket amplification.\u003c\/p\u003e\u003cp\u003eThe PRX5 uses a graphite-reinforced polypropylene cone, butyl rubber surround, and a pivoting tweeter arrangement. Its integrated 6 dB tweeter crossover is built into the coaxial speaker design. The PRX60C uses a polypropylene cone, butyl rubber surround, separate poly dome tweeters, and separate crossovers for a more configurable component installation.\u003c\/p\u003e\u003cp\u003eThis package works well for an installer planning a mixed-size system across compatible factory locations. Confirm the vehicle's speaker openings, mounting depth, and wiring requirements before purchase, because speaker size alone does not guarantee direct fitment. The included grilles can be useful for custom or exposed installations, while factory door-panel installations may use the vehicle's original grilles instead.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixed-Size Speaker Package:\u003c\/strong\u003e Combines 6.5-inch components with 5.25-inch coaxial speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePRX60C Component Set:\u003c\/strong\u003e Includes separate mids, tweeters, and external crossovers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePRX5 Pivot Tweeters:\u003c\/strong\u003e Allows high-frequency direction to be adjusted during installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches common car-audio speaker-channel configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eButyl Rubber Surrounds:\u003c\/strong\u003e Used on both listed speaker models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Grilles:\u003c\/strong\u003e Both PRX5 and PRX60C specifications list grilles.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PRX5 coaxial speakers use graphite-reinforced polypropylene cones, PEI dome tweeters, integrated 6 dB tweeter crossovers, and butyl rubber surrounds. The PRX60C component set uses polypropylene midrange cones, butyl rubber surrounds, separate poly dome multi-mount tweeters, and separate crossover networks. Both models are part of Memphis Audio's Power Reference speaker line.\u003c\/p\u003e\u003cp\u003eVerify the mounting location before installation: the PRX5 has a listed mounting depth of 2.125 inches, while the PRX60C has a listed mounting depth of 2.5 inches. Install the PRX60C tweeters and crossovers securely, route wiring away from moving mechanisms and sharp edges, and observe speaker polarity. Match each speaker channel to its 4-ohm load and RMS rating rather than relying on peak-power figures.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":47970434384035,"sku":"PRX5","price":45.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/81zHEBdcAuL.jpg?v=1786154055"},{"product_id":"memphis-prx60","title":"Memphis PRX60 6.5\" Oversized 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Memphis PRX60 is a pair of 6.5-inch oversized, 2-way coaxial car speakers from the Power Reference line. It is designed as a practical replacement or upgrade for compatible factory speaker locations. The coaxial layout combines a woofer and tweeter in each speaker for a compact full-range installation.\u003c\/p\u003e\u003cp\u003eThese speakers suit listeners replacing worn factory drivers or building a modest audio-system upgrade without moving to separate component speakers. Each speaker is rated for 50 watts RMS and 100 watts peak power at 4 ohms. Their 88 dB sensitivity supports use with appropriately matched factory or aftermarket amplification.\u003c\/p\u003e\u003cp\u003eThe PRX60 uses a polypropylene woofer cone with a polyurethane surround, paired with a PEI dome tweeter. This material combination is intended to provide a durable moving assembly for everyday vehicle use. The speaker’s published frequency response is 73 Hz to 20 kHz.\u003c\/p\u003e\u003cp\u003eA multi-direction pivot tweeter system allows the high-frequency driver to be aimed after installation. This can help direct upper-frequency output toward the listening area when the speakers are installed low in doors or other off-axis factory locations. An integrated 6 dB tweeter crossover is included within the coaxial design.\u003c\/p\u003e\u003cp\u003eThe oversized 6.5-inch format fits many common speaker positions, but vehicle fitment should always be checked against the mounting dimensions before purchase. The PRX60 has a 2.5-inch listed mounting depth and a 5-9\/16-inch cutout requirement. It is supplied as a pair with grilles and installation hardware for a more complete replacement-speaker package.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter functions in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50W RMS Handling:\u003c\/strong\u003e Supports properly matched factory or aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Dome Tweeter:\u003c\/strong\u003e Handles high-frequency reproduction in the coaxial assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePivot Tweeter System:\u003c\/strong\u003e Lets installers aim the tweeter after mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated 6 dB Crossover:\u003c\/strong\u003e Filters the tweeter within each speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOversized 6.5-Inch Fitment:\u003c\/strong\u003e Suits many compatible factory speaker locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PRX60 uses a graphite-reinforced polypropylene cone design, polyurethane surround, PEI dome tweeter, and 10-ounce magnet structure. Its black-on-black M-Cone appearance keeps the presentation understated behind factory grilles or when using the included grilles. The speakers are built as conventional 4-ohm coaxial replacements rather than separate woofer-and-tweeter component sets.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle’s available mounting depth, cutout diameter, and mounting-hole pattern before installation. The published top-mount depth is 2-9\/16 inches, bottom-mount depth is 2-3\/4 inches, and cutout diameter is 5-9\/16 inches. Connect each speaker with correct positive and negative polarity, use an audio source or amplifier compatible with a 4-ohm load, and set amplifier gain appropriately for the 50-watt RMS rating.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":47970434449571,"sku":"PRX60","price":46.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/812z0aLlUbL.jpg?v=1786154058"},{"product_id":"memphis-prx602","title":"Memphis PRX602 6.5\" 2-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Memphis PRX602 is a pair of 6.5-inch, 2-way coaxial car speakers designed as a straightforward replacement or upgrade for many factory speaker locations. They combine a woofer and tweeter in each speaker, allowing installation without separate external crossover networks. This makes them suitable for drivers replacing worn factory speakers or building an entry-level aftermarket audio system.\u003c\/p\u003e\u003cp\u003eEach PRX602 speaker is rated to handle 50 watts RMS and 100 watts peak power at 4 ohms. That power range works with many factory radios while also providing a sensible match for a modest aftermarket amplifier. With 88 dB sensitivity, the speakers are intended for everyday in-car listening rather than high-power competition systems.\u003c\/p\u003e\u003cp\u003eThe coaxial design uses a graphite-reinforced polypropylene cone for the woofer and a PEI dome tweeter for high frequencies. Its pivoting tweeter can be aimed toward the listening area to help tailor high-frequency direction in installations where the speakers are mounted low in doors or off-axis. An integrated 6 dB tweeter crossover is included within the speaker assembly.\u003c\/p\u003e\u003cp\u003eMemphis specifies a butyl rubber surround and a 10-ounce magnet structure for this model. The black speaker design is intended to blend into factory-style locations, and protective grilles are included for custom or exposed installations. The specified frequency response is 100 Hz to 20 kHz.\u003c\/p\u003e\u003cp\u003eThe PRX602 can serve as front or rear full-range speakers in a compatible vehicle, provided the mounting dimensions and speaker fitment are verified first. They are sold as a pair, so two pairs may be used for vehicles with four compatible speaker locations. For amplified systems, choose an amplifier whose clean per-channel output is appropriate for the speakers' 50-watt RMS rating.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in each speaker for simplified replacement installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50W RMS Handling:\u003c\/strong\u003e Supports moderate factory-radio or aftermarket-amplifier power levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePivoting PEI Tweeter:\u003c\/strong\u003e Lets the installer direct treble toward the listening position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated 6 dB Crossover:\u003c\/strong\u003e Filters the tweeter within the coaxial speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGraphite-Reinforced Polypropylene Cone:\u003c\/strong\u003e Provides the woofer cone material specified for this model.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Speaker Grilles:\u003c\/strong\u003e Adds protection for installations with exposed speaker faces.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PRX602 uses a graphite-reinforced polypropylene woofer cone, butyl rubber surround, PEI dome tweeter, and 10-ounce magnet structure. Its black finish and coaxial layout provide a clean appearance in replacement or custom speaker locations. The tweeter is mounted centrally and uses a multi-direction pivot system.\u003c\/p\u003e\u003cp\u003eVerify vehicle-specific fitment before purchase, including the 4-7\/8-inch cutout requirement and available mounting clearance. The listed top-mount depth is 2-1\/4 inches, while the bottom-mount depth is 2-11\/16 inches. The package includes two speakers, two grilles, mounting hardware, speaker leads, and a mounting template; adapters or vehicle-specific harnesses may still be required for a factory installation.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":47970435268771,"sku":"PRX602","price":51.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/81EByFiD29L.jpg?v=1786154060"},{"product_id":"memphis-prx60c-1","title":"Memphis PRX60C 6.5\" Component Speaker System","description":"\u003cp\u003eThe Memphis PRX60C is a 6.5-inch oversized, two-way component speaker system designed to replace factory door speakers with a more configurable front-stage upgrade. It combines separate woofers, separate tweeters, and external crossover networks rather than placing every driver in one speaker basket. This layout is suited to vehicles with dedicated tweeter locations or installations where the tweeters can be mounted separately.\u003c\/p\u003e\u003cp\u003eThis system is intended for listeners upgrading common OEM speaker locations while retaining a conventional 4-ohm speaker load. Each set is rated for 50 watts RMS and 100 watts peak power handling, making power matching straightforward when selecting an aftermarket amplifier or compatible head-unit power. The 88 dB sensitivity rating and component layout support a practical daily-driver audio upgrade.\u003c\/p\u003e\u003cp\u003eThe PRX60C uses polypropylene woofer cones and butyl rubber surrounds for the midrange drivers. Separate 1-inch poly dome tweeters handle high-frequency reproduction, while the included external crossovers direct the appropriate signal range to each driver. Separating the tweeters from the woofers allows more flexibility when aiming and positioning the high-frequency drivers.\u003c\/p\u003e\u003cp\u003eMemphis supplies multi-mount tweeter hardware so the tweeters may be installed in flush, surface, or angled surface-mount configurations. This is useful when factory sail panels, dash locations, or custom panels determine where the tweeters can be placed. The woofers have a 2.5-inch mounting depth, so installation should begin with a check of door-panel and window-clearance space.\u003c\/p\u003e\u003cp\u003eThe PRX60C can serve as a front-speaker upgrade in a factory-system refresh or as part of a larger amplified system. Its included crossovers, wiring leads, mounting hardware, and grilles provide the core pieces needed for speaker installation, although vehicle-specific adapters or harnesses may still be required. Confirm the vehicle's speaker opening, mounting depth, wiring polarity, and available tweeter location before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Component Design:\u003c\/strong\u003e Separate woofers and tweeters allow more flexible speaker placement than coaxial designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Crossovers:\u003c\/strong\u003e Included passive networks route appropriate frequencies to the woofer and tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Poly Dome Tweeters:\u003c\/strong\u003e Separate tweeters can be positioned for the desired installation layout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cones:\u003c\/strong\u003e Lightweight cones provide the primary midrange and midbass output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eButyl Rubber Surrounds:\u003c\/strong\u003e Durable surrounds support controlled woofer movement in automotive use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Load:\u003c\/strong\u003e Compatible with typical car-audio speaker channels designed for 4-ohm speakers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PRX60C includes two oversized 6.5-inch woofers, two 1-inch tweeters, and two external crossover networks. The woofer design uses polypropylene cones, butyl rubber surrounds, and 10-ounce magnets. Included grilles provide an option for custom or exposed speaker installations.\u003c\/p\u003e\u003cp\u003eMeasure the factory opening against the 5.557-inch woofer cutout requirement and verify the 2.5-inch top-mount depth before mounting. Connect each amplifier or radio channel to its crossover input, then connect the crossover's woofer and tweeter outputs to their respective drivers. The tweeters can be flush-mounted, surface-mounted, or installed in angled surface-mount housings; use the supplied template and hardware where appropriate.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":47970435334307,"sku":"PRX60C","price":99.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/811YRYkw3SL.jpg?v=1786154064"},{"product_id":"memphis-prx60s","title":"Memphis PRX60S 6.5\" Shallow 2-Way Car Speakers","description":"\u003cp\u003eThe Memphis PRX60S is a pair of 6.5-inch oversized shallow-mount 2-way car speakers built for factory locations with limited mounting depth. Its slim chassis helps address installations where conventional full-depth speakers may not fit. The 2-ohm design is intended for systems and factory locations designed to accommodate low-impedance speakers.\u003c\/p\u003e\u003cp\u003eThese speakers are suited to drivers replacing shallow factory door speakers, particularly in select Dodge, Chrysler, Toyota, and similarly space-constrained applications. The low-profile tweeter is designed to sit beneath many factory grilles for a more integrated installation. Vehicle-specific fitment should still be verified before purchase.\u003c\/p\u003e\u003cp\u003eThe PRX60S combines a polypropylene woofer cone and rubber surround with a PEI dome tweeter. This 2-way coaxial layout places high- and midrange-frequency reproduction in one speaker assembly. Its swivel tweeter design allows the installer to direct high frequencies toward the listening area when the mounting location permits.\u003c\/p\u003e\u003cp\u003eMemphis rates the PRX60S at 50 watts RMS and 100 watts peak, with 86 dB sensitivity. Its 1.89-inch manufacturer-listed mounting depth is the central feature of the design, helping it fit in shallow speaker cavities. An 11-ounce magnet supports the compact shallow-mount construction.\u003c\/p\u003e\u003cp\u003eThe PRX60S can serve as a direct replacement pair in a compatible factory system or as part of a modest aftermarket speaker upgrade. Because it uses 2-ohm impedance, the connected factory radio or amplifier should be verified for 2-ohm speaker compatibility. Protective grilles are included for installations that do not retain factory grilles.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow-Mount Profile:\u003c\/strong\u003e The slim 1.89-inch mounting depth helps fit limited-depth speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Impedance:\u003c\/strong\u003e Designed for compatible low-impedance factory or aftermarket audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOversized 6.5-Inch Format:\u003c\/strong\u003e Uses a 6.5-inch oversized shallow speaker platform.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Profile Swivel Tweeter:\u003c\/strong\u003e Helps fit under many factory grilles while allowing directional adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter drivers in each speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Grilles:\u003c\/strong\u003e Supplies protective grilles for custom or exposed-speaker installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PRX60S uses polypropylene woofer cones with rubber surrounds and PEI dome tweeters. Its shallow basket profile and low-profile tweeter are designed around tight factory speaker clearances. Included grilles use black steel mesh with plastic frames.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's mounting depth, cutout, mounting-hole pattern, and factory-system impedance before installation. The published cutout diameter is 5.525 inches, while retailer-measured top-mount depth is 1-15\/16 inches; use the physical speaker and vehicle measurements to confirm clearance. The package includes speaker leads, screws, speed clips, a template, and grilles for installation.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":47970435367075,"sku":"PRX60S","price":55.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71UfLrCNi1L.jpg?v=1786154066"},{"product_id":"memphis-prx6902","title":"Memphis PRX6902 6x9\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Memphis PRX6902 is a pair of 6x9-inch, 2-way coaxial car speakers from the Power Reference series. It is designed to replace compatible factory speakers with a full-range speaker solution that combines a woofer and tweeter in each location. This makes it a practical option for vehicles that use 6x9-inch speaker positions and need an audio-system refresh.\u003c\/p\u003e\u003cp\u003eEach speaker handles up to 60 watts RMS and 120 watts peak at a 4-ohm impedance. With 90 dB sensitivity and a 55 Hz to 20 kHz frequency response, the PRX6902 is suited to factory-radio upgrades as well as modest aftermarket amplification. Its 2-way configuration covers bass, midrange, and treble from a single coaxial assembly.\u003c\/p\u003e\u003cp\u003eThe woofer uses a polypropylene cone with a polyurethane surround. This material combination is intended to provide controlled cone movement while supporting regular in-vehicle use. A PEI dome tweeter handles high-frequency reproduction and is mounted within the coaxial speaker assembly.\u003c\/p\u003e\u003cp\u003eMemphis equips the PRX6902 with a pivot-mount, multi-direction tweeter system. The tweeter can be aimed to help tailor high-frequency direction for the installation location. An integrated 6 dB tweeter crossover is also specified to manage the transition to the tweeter.\u003c\/p\u003e\u003cp\u003eThese speakers fit naturally into a straightforward front- or rear-speaker replacement plan, and they can also be used as part of a larger system with a separate subwoofer for deeper bass. Verify available mounting depth, mounting-hole pattern, and vehicle-specific adapter needs before installation. The pair includes protective grilles and installation hardware for applications where those parts are needed.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W RMS Handling:\u003c\/strong\u003e Supports continuous power up to 60 watts each.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Dome Tweeter:\u003c\/strong\u003e Reproduces high frequencies through a dome design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePivot Tweeter System:\u003c\/strong\u003e Allows tweeter direction to be adjusted after mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Provides the woofer diaphragm material for full-range playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated 6 dB Crossover:\u003c\/strong\u003e Directs high frequencies to the tweeter.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PRX6902 uses a black Power Reference design with a polypropylene woofer cone, polyurethane surround, PEI dome tweeter, and 14-ounce magnet. Each speaker is a 4-ohm, 2-way coaxial unit with a specified 3-inch mounting depth. Protective grilles are included, and retailer package documentation identifies black steel-mesh grilles with plastic frames.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 6x9-inch speaker and has adequate depth behind the mounting surface before ordering. The package is listed with two speakers, two 12-inch speaker leads, two grilles, eight 1-3\/8-inch screws, and eight speed clips. Use vehicle-specific mounting adapters or wiring harnesses when the factory opening or connector differs from the included hardware.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":47970435399843,"sku":"PRX6902","price":70.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/81wLgswXRPL.jpg?v=1786154068"},{"product_id":"memphis-prx6903","title":"Memphis PRX6903 6x9\" 3-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Memphis PRX6903 is a pair of 6x9-inch, 3-way coaxial car speakers designed as a direct-size audio upgrade for compatible factory speaker locations. It combines woofer, midrange, and tweeter elements into each speaker to provide full-range playback from a single mounting position. This makes it a practical option for replacing worn or limited factory 6x9 speakers.\u003c\/p\u003e\u003cp\u003eWith 60 watts RMS and 120 watts peak power handling per speaker, the PRX6903 is suited to systems that need a moderate-power full-range speaker. Its 90 dB sensitivity supports efficient operation in a variety of car-audio installations. The 4-ohm design is compatible with common aftermarket speaker outputs.\u003c\/p\u003e\u003cp\u003eThe 3-way coaxial layout is intended to bring midrange and high-frequency detail into the same location as the 6x9 woofer. A PEI dome tweeter handles the upper frequencies, while the multi-direction pivot tweeter system allows the tweeter angle to be adjusted for the installation. This can help direct high-frequency sound toward the listening area where space permits.\u003c\/p\u003e\u003cp\u003eMemphis uses a polyurethane surround and stealthy black-on-black M-Cone design for the PRX6903. The surround supports cone movement while contributing to the speaker's durable construction. Its integrated appearance suits installations where the speaker may be visible behind a grille or rear deck opening.\u003c\/p\u003e\u003cp\u003eThe PRX6903 fits into a system upgrade path for vehicles that use 6x9-inch speakers and have sufficient mounting clearance. It can be used as a replacement pair or matched with other compatible full-range speakers in a larger system. Grilles, speaker leads, mounting hardware, and a user manual are included for installation flexibility.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Size:\u003c\/strong\u003e Fits compatible 6x9-inch factory or custom speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Design:\u003c\/strong\u003e Combines woofer, midrange, and tweeter elements in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W RMS Handling:\u003c\/strong\u003e Supports 60 watts RMS and 120 watts peak per speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Dome Tweeter:\u003c\/strong\u003e Provides high-frequency reproduction within the coaxial assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePivoting Tweeter System:\u003c\/strong\u003e Allows tweeter direction to be adjusted during installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Grilles:\u003c\/strong\u003e Adds protection and installation flexibility where speakers are exposed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PRX6903 uses a polyurethane surround, PEI dome tweeter, and black-on-black M-Cone design. Each speaker has a 14-ounce magnet and a 3-inch mounting depth. The pair is supplied with two grilles for installations that require visible speaker protection.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 6x9-inch speaker and provides at least 3 inches of mounting depth before installation. Match the speakers to a compatible 4-ohm source or amplifier and avoid exceeding their 60-watt RMS rating per speaker. The package includes two 12-inch speaker leads, eight screws, eight speed clips, and a user manual; vehicle-specific mounting adapters or wiring interfaces may still be needed depending on the vehicle.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":47970435432611,"sku":"PRX6903","price":74.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/81BQIsBDF9L.jpg?v=1786154071"},{"product_id":"memphis-prx69s","title":"Memphis PRX69S 6x9\" Shallow 2-Way Car Speakers","description":"\u003cp\u003eThe Memphis PRX69S is a pair of shallow-mount 6x9-inch, 2-way car speakers designed for vehicles with limited speaker-depth clearance. Its slim basket and low-profile tweeter help address common fitment challenges in factory door and rear-deck locations. The speakers use a 2-ohm nominal impedance and are intended for vehicle audio systems that support that load.\u003c\/p\u003e\u003cp\u003eThese speakers are a practical option for replacing factory 6x9-inch speakers where a conventional full-depth aftermarket speaker may not fit. Memphis specifically identifies shallow factory locations common in Dodge, Chrysler, Toyota, and similar vehicles as intended applications. Vehicle-specific fitment should still be verified before installation.\u003c\/p\u003e\u003cp\u003eThe PRX69S is rated for 60 watts RMS and 120 watts peak power handling, with an 88 dB sensitivity rating. Its published frequency response is 60 Hz to 20 kHz, covering bass, midrange, and treble content for a full-range speaker location. A polypropylene woofer cone with rubber surround is paired with a PEI dome tweeter.\u003c\/p\u003e\u003cp\u003eA key part of the shallow design is the updated low-profile tweeter, which sits below the woofer surround. This arrangement is intended to provide additional clearance beneath many factory speaker grilles. The speaker also uses a built-in 6 dB Mylar crossover to direct high-frequency content to the tweeter.\u003c\/p\u003e\u003cp\u003eThe PRX69S can be used as a factory-speaker replacement or as part of a larger amplified audio upgrade. Its 2-ohm impedance may allow compatible factory or aftermarket equipment to deliver more power than with a 4-ohm speaker, but amplifier and radio compatibility should be confirmed. Protective grilles and installation hardware are included for custom installations where factory grilles are not retained.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow-Mount Basket:\u003c\/strong\u003e Uses a 2.29-inch mounting depth for restricted locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Profile Tweeter:\u003c\/strong\u003e Sits below the surround for improved grille clearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Impedance:\u003c\/strong\u003e Designed for systems compatible with 2-ohm speaker loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W RMS Handling:\u003c\/strong\u003e Supports moderate-power factory or aftermarket system upgrades.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Coaxial Design:\u003c\/strong\u003e Combines a woofer and center-mounted dome tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Grilles:\u003c\/strong\u003e Provides protection and a finished appearance for custom installs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PRX69S uses a polypropylene woofer cone, rubber surround, PEI dome tweeter, and an 11-ounce magnet. Its low-profile tweeter is integrated into the speaker assembly rather than requiring a separate tweeter mount. Included grilles use black steel mesh with plastic frames.\u003c\/p\u003e\u003cp\u003eConfirm the available mounting depth, cutout dimensions, mounting-hole pattern, and clearance behind the factory grille before purchasing. The speaker has a 2.29-inch published mounting depth, while top- and bottom-mount measurements may differ according to the mounting method. Verify that the factory radio or amplifier is stable with 2-ohm speakers, and use the included leads, screws, speed clips, and template as appropriate for the installation.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":47970435498147,"sku":"PRX69S","price":75.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/81LPUU9g2nL.jpg?v=1786154072"},{"product_id":"memphis-prxp4","title":"Memphis PRXP4 4\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Memphis PRXP4 is a pair of 4-inch, 2-way coaxial car speakers designed for compact factory speaker locations. It provides a direct replacement option when an original speaker has failed or no longer delivers clear, balanced sound. Its shallow profile helps address installations where grille clearance is limited.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for vehicles that use 4-inch speaker positions, subject to confirming the mounting opening and available depth in the vehicle. The PRXP4 uses a point source tweeter arrangement to keep the coaxial assembly low in height. This makes it a practical option for many factory-style installations with retained trim panels or grilles.\u003c\/p\u003e\u003cp\u003eA silk dome tweeter handles high-frequency detail, while the graphite-reinforced polypropylene cone is paired with a rubber surround. This combination is designed for controlled cone movement and long-term durability in a vehicle environment. The result is a smooth, warm-leaning character suited to everyday listening.\u003c\/p\u003e\u003cp\u003eThe integrated 6 dB tweeter crossover directs appropriate high frequencies to the tweeter within the speaker assembly. This built-in design simplifies installation compared with systems that require separate passive crossover boxes. The low-profile point source tweeter is the central engineering feature, helping preserve clearance without adding a separate tweeter location.\u003c\/p\u003e\u003cp\u003eWith a 4-ohm nominal impedance and 20-watt RMS power handling per speaker, the PRXP4 can be used with compatible factory head units or modestly powered aftermarket amplification. It is best matched to installations that prioritize fitment, clear upper-frequency reproduction, and a compact coaxial design. Verify vehicle-specific fitment, mounting depth, and wiring connections before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in one compact speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Source Tweeter:\u003c\/strong\u003e Low-profile layout helps preserve factory-grille clearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilk Dome Tweeter:\u003c\/strong\u003e Supports smooth and detailed high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated 6 dB Crossover:\u003c\/strong\u003e Directs high frequencies to the tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReinforced Polypropylene Cone:\u003c\/strong\u003e Provides a durable, lightweight woofer diaphragm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber Surround:\u003c\/strong\u003e Supports controlled cone travel and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PRXP4 uses a graphite-reinforced polypropylene woofer cone, rubber surround, silk dome tweeter, and 8-ounce magnet. Its 2-way coaxial layout places the low-profile point source tweeter at the center of the woofer. The speaker has a 1.75-inch top-mounting depth for compact installation spaces.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 4-inch speaker and has at least the required mounting depth before ordering. Match the speakers to a compatible 4-ohm factory or aftermarket audio system and observe the 20-watt RMS rating per speaker when selecting amplification. Use vehicle-appropriate mounting hardware and adapters where required, as fitment varies by vehicle.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":47970436153507,"sku":"PRXP4","price":37.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61pcinUkzfL.jpg?v=1786154089"}],"url":"https:\/\/nsiexport.com\/collections\/tweeters.oembed?page=4","provider":"NSI Export","version":"1.0","type":"link"}