{"title":"Top Sellers","description":"","products":[{"product_id":"audio360-ad0c-0-gauge-amplifier-wiring-kit-true-spec-0-awg-power-cable-anl-fuse-holder-200a-250a-17-ft-installation-kit-with-rca-ground-speaker-remote-wire-universal-compatibility","title":"AUDIO360 AD0C 0 AWG Amplifier Wiring Kit","description":"\u003cp\u003eThe AUDIO360 AD0C is a 0 gauge amplifier wiring kit for installing a high-current car audio amplifier system. It combines the primary power, ground, signal, remote-turn-on, and speaker wiring needed for a single installation package. This helps simplify system planning when upgrading an amplifier and subwoofer or speaker setup.\u003c\/p\u003e\u003cp\u003eIts True Spec 0 AWG power cable is intended for amplifier installations that require a large-gauge main power run from the vehicle battery. The kit includes a 17-foot power cable and a 3-foot ground cable to support typical front-battery vehicle layouts. Cable lengths should still be checked against the vehicle's intended routing before installation.\u003c\/p\u003e\u003cp\u003eFor signal connection, the AD0C includes a 17-foot double-shielded RCA cable designed to carry audio from a compatible source unit to an amplifier. The shielding is intended to help reduce the chance of noise entering the low-level audio signal. A separate 17-foot remote turn-on wire is included for amplifier activation from a compatible head unit or signal source.\u003c\/p\u003e\u003cp\u003eProtection is handled by an inline ANL fuse holder supplied with 200A and 250A ANL fuses. This provides two fuse-rating options, allowing the installer to use the rating appropriate for the amplifier system's documented electrical requirements. The fuse holder should be installed in the main power run according to safe vehicle-audio installation practices.\u003c\/p\u003e\u003cp\u003eThe kit also supplies 20 feet of speaker wire plus installation accessories such as terminals and hardware. It is intended for use across a broad range of vehicle types, including cars, trucks, SUVs, motorcycles, ATVs, and RVs. The AD0C is a practical foundation for a wired amplifier installation where the system does not already include its required cabling and protection components.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue Spec 0 AWG Power Cable:\u003c\/strong\u003e Provides a large-gauge main power connection for amplifier installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e17-Foot Power Cable:\u003c\/strong\u003e Supports many vehicle battery-to-amplifier routing paths.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eANL Fuse Holder:\u003c\/strong\u003e Adds inline circuit protection to the main power connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Included Fuse Ratings:\u003c\/strong\u003e Includes 200A and 250A ANL fuse options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble-Shielded RCA Cable:\u003c\/strong\u003e Helps keep the amplifier signal connection organized and protected from interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Installation Wiring:\u003c\/strong\u003e Includes power, ground, RCA, remote, speaker wire, and accessories.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD0C centers on a green True Spec 0 AWG power cable, paired with separate ground, RCA, remote, and speaker wiring. Its ANL fuse holder, selectable fuse ratings, terminals, and installation accessories are supplied to consolidate common amplifier-installation components. This package is designed as an installation kit rather than an amplifier, speaker, or signal processor.\u003c\/p\u003e\u003cp\u003eRoute the 17-foot power cable from the battery to the amplifier while keeping it protected from abrasion, heat, and moving components. Use the 3-foot ground cable for a short, secure chassis ground near the amplifier, and route RCA signal cable separately from power wiring where practical. Confirm fuse selection, amplifier connection requirements, wire routing, and vehicle-specific mounting locations before beginning installation.\u003c\/p\u003e","brand":"AUDIO360","offers":[{"title":"Default Title","offer_id":47970374123683,"sku":"AD0C","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/819WQHDF8KL.jpg?v=1786151562"},{"product_id":"audio360-ad36tw-4-inch-super-tweeter-speaker-4-ohm-1800w-max-power-105db-sensitivity-titanium-diaphragm-ccaw-voice-coil-for-pro-car-audio","title":"Audio360 AD36TW 4-Inch Super Tweeter Speaker","description":"\u003cp\u003eThe AUDIO360 AD36TW is a 4-inch super tweeter designed to add high-frequency detail to a car-audio system. It is a 4-ohm speaker with a published frequency range of 2 kHz to 20 kHz. This makes it suited to systems that need a dedicated driver for upper-frequency reproduction alongside midrange speakers and subwoofers.\u003c\/p\u003e\u003cp\u003eWith a published sensitivity of 105 dB, the AD36TW is intended for applications where efficient high-frequency output is important. Its 1,800-watt maximum-power specification identifies it as a pro-car-audio-oriented component, while no RMS power rating is published. Match the speaker with compatible amplification and system tuning rather than selecting equipment from maximum-power figures alone.\u003c\/p\u003e\u003cp\u003eThe AD36TW uses a titanium diaphragm and a CCAW voice coil. Titanium is specified for the diaphragm material, while CCAW refers to copper-clad aluminum wire in the voice coil. These published construction details distinguish the driver from basic paper- or polymer-diaphragm tweeters.\u003c\/p\u003e\u003cp\u003eThis super tweeter is a practical choice for enthusiasts building a multi-driver setup that needs more presence in the upper frequencies. Its 4-ohm nominal impedance allows it to be considered for amplifiers or passive networks designed for 4-ohm speaker loads. The published 2 kHz to 20 kHz range provides a useful starting point when planning system crossover points.\u003c\/p\u003e\u003cp\u003eThe 12.3-ounce magnet specification supports the AD36TW's dedicated high-frequency-driver design. Use it as part of a properly configured car-audio system rather than as a full-range replacement speaker. Because published mounting measurements and included accessories are not available, confirm physical fitment and installation hardware before purchase.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Inch Super Tweeter:\u003c\/strong\u003e Adds a dedicated high-frequency driver to compatible car-audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Nominal Impedance:\u003c\/strong\u003e Supports matching with compatible 4-ohm amplifier or crossover channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,800W Maximum Power:\u003c\/strong\u003e Published maximum-power handling for pro-car-audio system planning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e105 dB Sensitivity:\u003c\/strong\u003e Indicates efficient output from the rated speaker input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTitanium Diaphragm:\u003c\/strong\u003e Uses a titanium diaphragm for high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coil:\u003c\/strong\u003e Features a copper-clad aluminum wire voice coil.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD36TW combines a titanium diaphragm, CCAW voice coil, and a published 12.3-ounce magnet. It is specified as a 4-inch tweeter with a 4-ohm nominal impedance. The design is focused on reproducing the upper portion of a multi-speaker car-audio system's frequency range.\u003c\/p\u003e\u003cp\u003eInstall the AD36TW only with equipment appropriate for a 4-ohm tweeter and configure the system so the speaker is used within its published 2 kHz to 20 kHz range. An appropriate crossover or high-pass arrangement should be selected as part of the overall system design; no crossover is specified as included. Verify available mounting depth, cutout requirements, wiring hardware, and package contents with the seller or installer before installation.\u003c\/p\u003e","brand":"AUDIO360","offers":[{"title":"Default Title","offer_id":47970378154147,"sku":"AD36TW","price":37.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61UsGYKeH-L.jpg?v=1786151681"},{"product_id":"audio360-ad44tw-3-93-inch-super-tweeter-speaker-4-ohm-2200w-max-power-106db-sensitivity-pei-diaphragm-ccar-voice-coil-for-pro-car-audio","title":"Audio360 AD44TW 3.93\" Super Tweeter Speakers","description":"\u003cp\u003eThe Audio360 AD44TW is a 3.93-inch super tweeter pair designed to add dedicated high-frequency output to a car-audio system. It is suited to builds that need more presence and detail in the upper-frequency range than full-range speakers alone can provide. With a 4-ohm nominal impedance, the pair is intended for use in wired automotive audio installations.\u003c\/p\u003e\u003cp\u003eEach AD44TW is rated for up to 2200 watts maximum power, for a listed 4400-watt total maximum power rating for the pair. Its 106 dB sensitivity specification supports strong output from comparatively modest amplifier power when the system is set up correctly. The stated 1.5 kHz to 20 kHz frequency range focuses this driver on upper midrange and treble reproduction.\u003c\/p\u003e\u003cp\u003eA PEI diaphragm is used for the moving high-frequency element, while the voice coil is specified as CCAR. This material combination is intended to support consistent high-frequency reproduction in a car-audio environment. The 13-ounce magnet specification contributes to the driver assembly's structure and stability.\u003c\/p\u003e\u003cp\u003eThe AD44TW is a practical choice for enthusiasts building a louder, more detailed multi-speaker system. It can complement dedicated midrange drivers, coaxial speakers, and a properly configured amplifier system. Because it is a super tweeter, it is best used as part of a frequency-managed setup rather than as a stand-alone full-range speaker.\u003c\/p\u003e\u003cp\u003eFor a matched left-and-right installation, this listing includes two AD44TW super tweeters. Their compact 3.93-inch size can suit custom panels, doors, pillars, or other suitable locations when adequate mounting space is available. Final output and tonal balance depend on proper crossover selection, amplifier matching, and careful level setting.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.93-Inch Super Tweeters:\u003c\/strong\u003e Compact drivers dedicated to upper-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Fits common car-audio amplifier and crossover configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2200W Maximum Per Tweeter:\u003c\/strong\u003e Supports high-output system planning when properly configured.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e106 dB Sensitivity:\u003c\/strong\u003e Helps the tweeters produce strong output efficiently.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Diaphragm:\u003c\/strong\u003e Provides the specified diaphragm material for treble reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13-Ounce Magnet:\u003c\/strong\u003e Adds mass to the driver motor assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD44TW uses a PEI diaphragm and a CCAR voice coil in a compact super-tweeter format. Each driver is specified with a 13-ounce magnet and a 3.93-inch speaker size. The black, wired design is intended for automotive audio use.\u003c\/p\u003e\u003cp\u003eInstall the pair in a secure location with appropriate clearance for the mounting arrangement and wiring. Use a suitable high-pass crossover or other frequency-management method to keep low-frequency content out of the tweeters, and match the amplifier and crossover to the 4-ohm load. Confirm polarity between left and right speakers, then set gain conservatively to integrate their output with the rest of the system.\u003c\/p\u003e","brand":"AUDIO360","offers":[{"title":"Default Title","offer_id":47970378907811,"sku":"AD44TW","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61-6n0lWlnL.jpg?v=1786151702"},{"product_id":"audio360-ad48tw-5-49-x-4-72-inch-super-tweeter-speaker-4-ohm-2500w-max-power-107db-sensitivity-phenolic-diaphragm-ccaw-voice-coil-for-pro-car-and-marine-audio","title":"Audio360 AD48TW 5.49\" Super Tweeter","description":"\u003cp\u003eThe Audio360 AD48TW is a high-frequency super tweeter designed to add upper-range detail to a car or marine audio system. It is intended for listeners building systems that need dedicated treble reproduction beyond what larger speakers or subwoofers provide. The requested configuration includes two AD48TW tweeters for left- and right-channel use.\u003c\/p\u003e\u003cp\u003eEach AD48TW is rated at 4 ohms and listed with 2,500 watts maximum power handling, for 5,000 watts total maximum handling across the pair. Its 107 dB sensitivity rating indicates efficient output from comparatively modest amplifier power. The stated 2 kHz to 20 kHz frequency range focuses the driver on upper-midrange and high-frequency duties.\u003c\/p\u003e\u003cp\u003eA phenolic diaphragm is used for the sound-producing element, while the voice coil uses CCAW construction. These materials are part of the driver design specified for this model. A 15.2-ounce magnet is also listed for each tweeter.\u003c\/p\u003e\u003cp\u003eThe AD48TW is suited to systems using separate low-, mid-, and high-frequency drivers rather than as a replacement for a full-range speaker. It can complement midrange speakers and subwoofers by handling the upper portion of the audible frequency range. Its wired connection format makes it appropriate for conventional amplified car-audio speaker wiring.\u003c\/p\u003e\u003cp\u003eThis model is listed for car and marine audio applications, giving installers flexibility when selecting a high-frequency driver for a vehicle or boat system. Proper system matching remains important because the 4-ohm load must be compatible with the amplifier channel and crossover arrangement. The product is listed as a super tweeter, so it should be integrated as part of a multi-driver system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Tweeter Design:\u003c\/strong\u003e Adds dedicated high-frequency output to a multi-speaker audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with amplifier channels designed for 4-ohm speaker loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e107 dB Sensitivity:\u003c\/strong\u003e Supports efficient high-frequency output with appropriate system power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 kHz–20 kHz Response:\u003c\/strong\u003e Covers upper-midrange and treble frequencies specified for the driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhenolic Diaphragm:\u003c\/strong\u003e Uses the specified phenolic material for the diaphragm assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coil:\u003c\/strong\u003e Features a copper-clad aluminum wire voice coil design.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD48TW uses a phenolic diaphragm, CCAW voice coil, and a listed 15.2-ounce magnet. Its published overall size is 5.49 by 4.72 inches, placing it in the large-format super-tweeter category. The model is specified as a wired dynamic-driver tweeter for automotive and marine-oriented audio applications.\u003c\/p\u003e\u003cp\u003eMount the pair where their high-frequency output can be directed toward the listening area and where the 5.49 by 4.72-inch footprint can be accommodated. Connect each tweeter to an amplifier or speaker circuit compatible with a 4-ohm load, and use an appropriate crossover or high-pass arrangement so the driver operates within its listed 2 kHz to 20 kHz frequency range. Confirm available mounting clearance and system wiring before installation.\u003c\/p\u003e","brand":"AUDIO360","offers":[{"title":"Default Title","offer_id":47970379301027,"sku":"AD48TW","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61FX_9_-5SL.jpg?v=1786151714"},{"product_id":"audio360-ad4c-4-gauge-amplifier-wiring-kit-true-spec-4-awg-power-cable-agu-fuse-holder-with-80a-100a-fuses-complete-17-ft-install-kit-for-car-truck-motorcycle-atv-rv","title":"AUDIO360 AD4C 4 Gauge Amplifier Wiring Kit","description":"\u003cp\u003eThe AUDIO360 AD4C is a 4 AWG amplifier wiring kit for routing power, signal, remote turn-on, and speaker connections in a vehicle audio installation. It provides the core cable lengths and protection hardware needed when adding an amplifier to a car, truck, SUV, motorcycle, ATV, or RV. The kit is intended for installers replacing incomplete wiring or building an amplifier system from the ground up.\u003c\/p\u003e\u003cp\u003eA True Spec 4 AWG power cable serves as the primary power connection between the battery area and amplifier. The included 17-foot length supports common vehicle cable-routing paths, while the separate 3-foot ground cable is intended for a short chassis-ground connection. Properly sized power and ground wiring are important parts of a dependable amplifier installation.\u003c\/p\u003e\u003cp\u003eFor audio signal routing, the AD4C includes a 17-foot double-shielded RCA cable. Its shielding is designed to help reduce interference that can enter low-level audio signal wiring in a vehicle. A 17-foot remote wire is also included to connect the amplifier's turn-on lead to a compatible source unit or signal interface.\u003c\/p\u003e\u003cp\u003eThe kit includes an inline AGU fuse holder with both 80A and 100A AGU fuses. These fuse options provide flexibility when selecting circuit protection appropriate to the connected amplifier system. Fuse selection and installation should follow the amplifier manufacturer's requirements and be placed close to the battery-side power connection.\u003c\/p\u003e\u003cp\u003eA 20-foot speaker wire is included for connecting an amplifier to speakers or a subwoofer system. With power cable, ground cable, signal cable, remote wire, fuse protection, and installation accessories included, the AD4C helps consolidate the main wiring items for an amplifier project. It is a practical fit for entry-level and mid-level vehicle audio upgrades using 4 AWG power wiring.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue Spec 4 AWG Power Cable:\u003c\/strong\u003e Provides the primary power run for an amplifier installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e17-Foot Power Cable:\u003c\/strong\u003e Offers length for common vehicle battery-to-amplifier routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble-Shielded RCA Cable:\u003c\/strong\u003e Helps reduce interference in the low-level audio signal path.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAGU Fuse Protection:\u003c\/strong\u003e Includes an inline fuse holder for battery-side circuit protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Included Fuse Ratings:\u003c\/strong\u003e Supplies both 80A and 100A AGU fuses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Wiring Assortment:\u003c\/strong\u003e Includes power, ground, RCA, remote, speaker wire, and accessories.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD4C combines 4 AWG power wiring, a dedicated ground cable, a double-shielded RCA cable, remote wire, speaker wire, and an AGU fuse holder in one installation package. Its cable lengths are arranged around typical amplifier installations, with a long power run and a shorter ground lead. The included fuse holder supports AGU-style fuses and is supplied with two fuse ratings.\u003c\/p\u003e\u003cp\u003eRoute the power cable separately from RCA signal wiring where practical, and keep the ground connection short and securely attached to clean vehicle chassis metal. Install the fuse holder close to the battery connection, then select the 80A or 100A fuse only according to the amplifier maker's specified protection requirement. Confirm that the amplifier accepts 4 AWG power wiring and that all vehicle-specific routing, termination, and safety requirements are met before installation.\u003c\/p\u003e","brand":"AUDIO360","offers":[{"title":"Default Title","offer_id":47970379661475,"sku":"AD4C","price":34.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/81rv5LY5Q-L.jpg?v=1786151723"},{"product_id":"audio360-ad6510p-6-5-inch-4-way-coaxial-car-speaker-650w-max-power-92db-sensitivity-4-ohm-impedance-perfect-for-custom-installations","title":"Audio360 AD6510P 6.5\" 4-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Audio360 AD6510P is a 6.5-inch 4-way coaxial car speaker designed for vehicle audio upgrades where space and straightforward fitment matter. Its compact format is suited to many door-panel, rear-deck, and custom speaker locations that accept a 6.5-inch driver. It is intended for listeners who want to replace factory speakers or build out an aftermarket sound system.\u003c\/p\u003e\u003cp\u003eThis model combines a 4-way coaxial layout with a 4-ohm nominal impedance for use with compatible aftermarket head units and amplifiers. The 92 dB sensitivity rating supports efficient output from modest-power sources while remaining suitable for amplified systems. Its sound character is aimed at strong midbass presence and clear everyday playback.\u003c\/p\u003e\u003cp\u003eThe AD6510P is rated at 650 watts maximum power and 325 watts RMS per speaker. These published ratings make proper amplifier gain setting especially important for reliable operation. Match the system carefully and avoid driving the speakers into audible distortion.\u003c\/p\u003e\u003cp\u003eAn injection-molded cone and rubber edge form the core of the speaker's woofer assembly. This material combination is designed to provide a durable moving surface while helping control cone movement. The coaxial construction keeps the multi-driver arrangement in a single speaker location, which can simplify an upgrade where separate tweeter mounting is not planned.\u003c\/p\u003e\u003cp\u003eWith a stated 2.76-inch mounting depth and 5.63-inch cutout diameter, the AD6510P can be considered for installations with limited rear clearance. Verify the vehicle's factory opening, available depth, mounting-hole pattern, and window or mechanism clearance before purchase. It can serve as part of a front- or rear-speaker upgrade when paired with compatible wiring and source equipment.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Coaxial Format:\u003c\/strong\u003e Fits many common vehicle speaker locations and custom panels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Way Design:\u003c\/strong\u003e Combines multiple drivers into one speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e650W Maximum Power:\u003c\/strong\u003e Provides published headroom for compatible amplified systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e325W RMS Rating:\u003c\/strong\u003e Helps guide amplifier matching and gain adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e92 dB Sensitivity:\u003c\/strong\u003e Supports efficient output with compatible source power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with many aftermarket head units and amplifiers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD6510P uses an injection-molded cone with a rubber edge for a durable speaker assembly. Its 4-way coaxial design places the speaker elements together in a compact footprint. This makes it practical for installations that do not have separate locations for dedicated tweeters.\u003c\/p\u003e\u003cp\u003eConfirm that your vehicle supports a 5.63-inch cutout and at least 2.76 inches of mounting depth before installation. Use appropriate vehicle-specific brackets or adapters when required, and check clearance behind the speaker before fastening it in place. For amplified use, set gains conservatively and use compatible 4-ohm-capable equipment.\u003c\/p\u003e","brand":"AUDIO360","offers":[{"title":"Default Title","offer_id":47970380775587,"sku":"AD6510P","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71FgnYTL49L.jpg?v=1786151758"},{"product_id":"audio360-ad6915p-6x9-4-way-coaxial-car-speakers-1000w-max-power-high-efficiency-output-perfect-for-factory-upgrades","title":"AUDIO360 AD6915P 6x9\" 4-Way Coaxial Car Speakers","description":"\u003cp\u003eThe AUDIO360 AD6915P is a 6x9-inch 4-way coaxial car speaker designed for factory-location upgrades in vehicles with compatible 6x9 mounting positions. It provides an all-in-one speaker configuration for replacing worn or underperforming door or rear-deck speakers. Its 4-ohm design supports use with many aftermarket head units and amplifiers.\u003c\/p\u003e\u003cp\u003eThis model is intended for drivers who want fuller output and stronger midbass from a factory-sized speaker location. The stated 92 dB sensitivity helps it produce substantial output from available amplifier power. It is suited to everyday listening systems as well as custom car-audio installations using 6x9 speaker locations.\u003c\/p\u003e\u003cp\u003eThe AD6915P is rated at 1000 watts maximum power and 500 watts RMS. Proper power matching remains important, so amplifier output and gain settings should be selected carefully for the speaker system. A compatible amplifier can help provide controlled output when higher volume is desired.\u003c\/p\u003e\u003cp\u003eAn injection-molded cone and rubber surround form the speaker's primary moving assembly. This construction is intended to support cone control and durability during regular vehicle use. The coaxial layout places multiple drivers within the 6x9 speaker format for broad sound coverage from a single mounting location.\u003c\/p\u003e\u003cp\u003eWith a 3.54-inch mounting depth and an 8.58 x 5.87-inch cutout requirement, the AD6915P should be measured against the vehicle's available space before purchase. It can be used in compatible doors, rear decks, or custom panels. Vehicle-specific mounting adapters, wiring harnesses, or hardware may be needed depending on the installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Format:\u003c\/strong\u003e Fits compatible factory-size speaker locations and custom panels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Way Coaxial Design:\u003c\/strong\u003e Combines multiple drivers within one speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1000W Maximum Power:\u003c\/strong\u003e Provides stated high-output power-handling capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W RMS Rating:\u003c\/strong\u003e Supports power matching with compatible amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e92 dB Sensitivity:\u003c\/strong\u003e Helps deliver strong output from available power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with many aftermarket radios and amplifiers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD6915P uses an injection-molded cone with a rubber surround. These materials are specified to support cone control and long-term durability. Its 4-way coaxial construction consolidates the speaker elements into a single 6x9-inch assembly.\u003c\/p\u003e\u003cp\u003eConfirm both the 3.54-inch mounting depth and 8.58 x 5.87-inch cutout dimensions against the intended location before installation. Use vehicle-appropriate brackets, wiring adapters, and mounting hardware where required; their inclusion is not confirmed. For amplified systems, match the amplifier configuration to the 4-ohm speaker load and set gains conservatively.\u003c\/p\u003e","brand":"AUDIO360","offers":[{"title":"Default Title","offer_id":47970381267107,"sku":"AD6915P","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/81C2zDpDq9L.jpg?v=1786151768"},{"product_id":"audio360-ad7500bmx-digital-bass-processor-dash-mount-remote-balanced-rca-inputs-sweep-wide-controls-ideal-for-car-audio-systems","title":"Audio360 AD7500BMX Digital Bass Processor","description":"\u003cp\u003eThe Audio360 AD7500BMX is a digital bass processor designed to restore and shape low-frequency information in a car audio signal. It is intended for systems where recorded bass sounds reduced or lacks the desired weight after passing through the source unit and signal chain. Installed ahead of an amplifier or crossover, it provides a dedicated stage for bass enhancement without replacing the head unit.\u003c\/p\u003e\u003cp\u003eThis processor is suited to listeners building or upgrading a subwoofer-equipped vehicle audio system with RCA signal connections. Its bass-restoration circuit is designed to recreate low-frequency content and blend it back into the program material. The result is adjustable bass emphasis that can be tailored to the vehicle, music source, and subwoofer system.\u003c\/p\u003e\u003cp\u003eThe AD7500BMX provides two main tuning controls: SWEEP selects the bass center-frequency range from 27 Hz to 63 Hz, while WIDE adjusts the affected frequency range. These controls let the installer focus the processing on a lower or higher bass region and choose a narrower or broader effect. A dash-mount remote gives the driver convenient access to bass-level adjustment after the system has been tuned.\u003c\/p\u003e\u003cp\u003eFor signal integration, the processor uses balanced RCA inputs rated for signals up to 15 V RMS. Its published 10 Hz to 35 kHz frequency response, 133 dB signal-to-noise ratio, and 0.0025% total harmonic distortion support use in systems where low noise and clean signal transfer are important. RCA outputs are rated at up to 13.2 V peak for connection to compatible downstream equipment.\u003c\/p\u003e\u003cp\u003eThe AD7500BMX operates from a 12 V DC vehicle electrical system and has a stated 150 mA current draw. A PFM subsonic-filter switch is included to reduce very low frequencies that may consume amplifier power without contributing useful audible output. It is a signal processor rather than a power amplifier, so it is used with compatible amplification and speakers or subwoofers.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital Bass Restoration:\u003c\/strong\u003e Reintroduces low-frequency content into the audio signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSWEEP Control:\u003c\/strong\u003e Selects a bass center frequency from 27 Hz to 63 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWIDE Control:\u003c\/strong\u003e Adjusts how broadly the bass processing affects adjacent frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced RCA Inputs:\u003c\/strong\u003e Accepts up to 15 V RMS signals with noise rejection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDash-Mount Remote:\u003c\/strong\u003e Provides driver-accessible bass-level adjustment and an LED indicator.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePFM Filter Switch:\u003c\/strong\u003e Reduces subsonic frequencies that can consume amplifier power.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD7500BMX is an in-vehicle electronic signal processor with RCA input and output connections, front-panel tuning controls, and a separate dash-mount remote. Published product information identifies the remote LED indicator and the SWEEP, WIDE, and bass-level adjustment functions. Specific enclosure materials, dimensions, and mounting-hole measurements have not been confirmed.\u003c\/p\u003e\u003cp\u003eInstall the processor in the low-level signal path before compatible crossovers or amplifiers, using RCA interconnects between the source signal and downstream equipment. Connect it to a 12 V DC vehicle supply and mount the included remote where its bass-level control can be reached safely from the driver's seat. Tune SWEEP and WIDE after the rest of the system is set, and use the PFM filter when very low-frequency energy is not appropriate for the enclosure or amplifier setup.\u003c\/p\u003e","brand":"AUDIO360","offers":[{"title":"Default Title","offer_id":47970381889699,"sku":"AD7500BMX","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71bMz6dwFXL.jpg?v=1786151788"},{"product_id":"audio360-ads1050-10-inch-car-subwoofer-1500w-max-power-4-ohm-impedance-heavy-duty-construction-ideal-for-sealed-or-ported-enclosures","title":"Audio360 ADS1050 10-Inch Car Subwoofer","description":"\u003cp\u003eThe Audio360 ADS1050 is a 10-inch car subwoofer designed for adding dedicated low-frequency output to a custom vehicle audio system. It is a raw subwoofer driver, so it is intended to be installed in a compatible enclosure and powered by an external amplifier. Its 4-ohm impedance and 750-watt RMS power-handling rating make it suited to systems planned around a single subwoofer channel.\u003c\/p\u003e\u003cp\u003eThis model is for listeners who want to supplement factory or aftermarket full-range speakers with deeper bass reproduction. The 10-inch format offers a compact alternative to larger subwoofers while still supporting substantial power handling. It can be used in a range of vehicle applications when enclosure space and mounting clearance are verified first.\u003c\/p\u003e\u003cp\u003eThe ADS1050 is rated for 750 watts RMS and 1,500 watts maximum power handling. These ratings help guide amplifier selection, with the RMS figure being the more useful number for continuous power matching. A properly adjusted amplifier and correctly configured crossover are important for dependable system operation.\u003c\/p\u003e\u003cp\u003eAudio360 specifies the ADS1050 for either sealed or ported enclosures. A sealed enclosure is generally chosen when a more controlled bass character is desired, while a ported enclosure can be selected when the enclosure is designed for greater output. Enclosure volume, port tuning, and installation details are not specified in the confirmed product data and should be planned separately.\u003c\/p\u003e\u003cp\u003eThe subwoofer uses heavy-duty cone and surround construction for high-output use. Its 5.12-inch mounting depth and 9.06-inch cutout diameter provide the key fitment measurements needed when selecting or building an enclosure. Confirm available depth, cutout size, mounting-hole pattern, and enclosure suitability before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e750W RMS Handling:\u003c\/strong\u003e Supports amplifier matching based on continuous power capacity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1500W Maximum Power:\u003c\/strong\u003e Provides a stated peak power-handling reference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Driver:\u003c\/strong\u003e Adds dedicated bass capability in a space-conscious format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible aftermarket amplifier configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed or Ported Use:\u003c\/strong\u003e Supports different enclosure approaches for system tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Fitment:\u003c\/strong\u003e Uses a 5.12-inch mounting depth and 9.06-inch cutout.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ADS1050 is built around a heavy-duty cone and surround assembly intended for car-audio subwoofer duty. Audio360 identifies the driver as suitable for high-output conditions, while the 10-inch size helps it fit installations where larger subwoofers may not be practical. Specific cone material, surround material, voice-coil details, magnet specifications, and sensitivity are not confirmed in the available product information.\u003c\/p\u003e\u003cp\u003eInstall the ADS1050 in a properly constructed sealed or ported enclosure that accommodates its 9.06-inch cutout diameter and at least 5.12 inches of mounting depth. Pair it with a compatible external amplifier, set gain conservatively, and use appropriate filtering to limit the driver to bass frequencies. An enclosure, amplifier, wiring, and mounting hardware should be planned separately unless supplied by the selling package.\u003c\/p\u003e","brand":"AUDIO360","offers":[{"title":"Default Title","offer_id":47970382184611,"sku":"ADS1050","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/716f0RT12cL.jpg?v=1786151798"},{"product_id":"audio360-ads1250-12-shallow-mount-car-subwoofer-1500w-max-power-4-ohm-impedance-low-profile-design-for-trucks-suvs-ideal-for-sealed-or-ported-enclosures","title":"Audio360 ADS1250-SHALLOW 12\" Shallow Mount Car Subwoofer","description":"\u003cp\u003eThe Audio360 ADS1250-SHALLOW is a 12-inch shallow-mount car subwoofer designed for vehicles where conventional subwoofer depth is difficult to accommodate. Its low-profile form factor helps make bass upgrades practical in compact truck, SUV, and custom-enclosure applications. It is intended for shoppers who want to add low-frequency output while preserving available cargo or cabin space.\u003c\/p\u003e\u003cp\u003eThis subwoofer is rated for 750 watts RMS power handling and 1,500 watts maximum power. That rating makes it appropriate for use with a properly matched aftermarket amplifier rather than direct connection to a head unit. The 4-ohm impedance offers straightforward compatibility with many mono and multi-channel amplifier configurations.\u003c\/p\u003e\u003cp\u003eThe ADS1250-SHALLOW is engineered around a rigid, low-profile cone intended to support durable low-frequency reproduction. Its shallow mounting depth of 4.13 inches allows it to fit where deeper 12-inch subwoofers may not. The 11.22-inch cutout requirement provides a specific starting point when planning a custom enclosure or replacement installation.\u003c\/p\u003e\u003cp\u003eIt can be used in either sealed or ported enclosures, allowing the enclosure design to influence the final bass character. A sealed enclosure can suit listeners seeking a more controlled response, while a ported design can be selected when the system goal is greater output. Enclosure construction and amplifier setup remain important factors in the finished system's performance.\u003c\/p\u003e\u003cp\u003eThe Audio360 ADS1250-SHALLOW is a passive subwoofer, so it requires an external amplifier, suitable enclosure, wiring, and installation hardware to operate in a vehicle. It can serve as the bass component of a new system or as part of an upgrade that adds low-end support to factory or aftermarket speakers. Verify enclosure clearance, cutout size, amplifier capability, and vehicle-specific mounting considerations before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-Inch Shallow-Mount Format:\u003c\/strong\u003e Fits bass upgrades into installations with limited mounting depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e750W RMS Rating:\u003c\/strong\u003e Supports use with a properly matched external amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,500W Maximum Power:\u003c\/strong\u003e Provides stated peak power-handling capacity for the driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible aftermarket mono or multi-channel amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4.13-Inch Mounting Depth:\u003c\/strong\u003e Helps accommodate compact custom enclosure designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Or Ported Compatibility:\u003c\/strong\u003e Allows enclosure selection based on system goals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ADS1250-SHALLOW uses a rigid low-profile cone in a space-conscious 12-inch subwoofer design. Its shallow construction is intended for trucks, SUVs, and other applications where a full-depth subwoofer would be difficult to mount. The driver is designed for enclosure-based installation rather than use as a self-powered subwoofer.\u003c\/p\u003e\u003cp\u003ePlan for an 11.22-inch cutout diameter and at least 4.13 inches of mounting depth, with additional clearance considered for wiring and enclosure construction. Use an external amplifier compatible with a 4-ohm subwoofer and keep amplifier power appropriate for the 750W RMS rating. Select a sealed or ported enclosure according to the desired system design, and have a qualified installer confirm vehicle fitment when needed.\u003c\/p\u003e","brand":"AUDIO360","offers":[{"title":"Default Title","offer_id":47970382479523,"sku":"ADS1250-SHALLOW","price":74.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/610HCyade2L.jpg?v=1786151808"},{"product_id":"audio360-ads6525-6-5-inch-car-subwoofer-600w-max-power-compact-design-4-ohm-impedance-perfect-for-small-enclosures","title":"Audio360 ADS6525 6.5\" Car Subwoofer","description":"\u003cp\u003eThe Audio360 ADS6525 is a 6.5-inch car subwoofer made for adding low-frequency output where enclosure space is limited. It is rated for 300 watts RMS and 600 watts maximum power, providing a compact option for custom vehicle audio builds. Its small-format design is intended for installations that cannot accommodate a larger subwoofer.\u003c\/p\u003e\u003cp\u003eThis model is suited to listeners building a compact bass system in a small car, truck, console enclosure, or other space-conscious installation. The 4-ohm impedance supports integration with compatible aftermarket amplification. It can be used as part of a focused low-end upgrade rather than requiring a large enclosure footprint.\u003c\/p\u003e\u003cp\u003eThe ADS6525 is designed to reproduce bass with a compact driver format and reinforced moving components. Its reinforced cone and surround are specified to support dependable low-frequency operation. A properly matched amplifier and correctly designed enclosure are important for achieving controlled performance.\u003c\/p\u003e\u003cp\u003eInstallation dimensions help simplify enclosure planning for custom builds. The listed mounting depth is 3.54 inches, while the required cutout diameter is 5.71 inches. Confirm available clearance behind the mounting surface before cutting or installing the subwoofer.\u003c\/p\u003e\u003cp\u003eThe ADS6525 can be used in either sealed or ported enclosures, allowing the system to be tailored to the desired bass character. A sealed design can prioritize a more controlled presentation, while a ported enclosure can emphasize output when properly designed. Match the enclosure, amplifier, and wiring configuration to the subwoofer's published impedance and power ratings.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Subwoofer:\u003c\/strong\u003e Compact driver size supports space-conscious car audio installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W RMS Rating:\u003c\/strong\u003e Provides a continuous power-handling reference for amplifier matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600W Maximum Power:\u003c\/strong\u003e Indicates the stated peak power-handling capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible aftermarket amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReinforced Cone And Surround:\u003c\/strong\u003e Supports durable low-frequency operation under normal use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Or Ported Use:\u003c\/strong\u003e Allows enclosure selection based on system goals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ADS6525 uses a reinforced cone and surround construction intended for low-frequency reproduction in a compact driver. Its 6.5-inch format is designed for installations where available enclosure volume and mounting space are limited. The compact layout makes it suitable for custom enclosures that are sized specifically around the vehicle and system design.\u003c\/p\u003e\u003cp\u003ePlan for a 5.71-inch cutout diameter and 3.54-inch mounting depth, including clearance for the rear of the driver and connected speaker wire. Use an enclosure designed for a 6.5-inch subwoofer and select a compatible amplifier based on the published 4-ohm impedance and 300-watt RMS rating. The ADS6525 may be installed in sealed or ported enclosures, but enclosure dimensions and port tuning should be determined for the intended application.\u003c\/p\u003e","brand":"AUDIO360","offers":[{"title":"Default Title","offer_id":47970382774435,"sku":"ADS6525 (SUB)","price":46.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71Wt_Tx9EQL.jpg?v=1786151817"},{"product_id":"audio360-ad6525m-ultra-6-5-midrange-speaker-650w-max-power-325w-rms-dual-voice-coil-press-paper-cone-ideal-for-car-audio-systems","title":"AUDIO360 ADS6525M 6.5\" Dual Voice Coil Midrange Speaker","description":"\u003cp\u003eThe AUDIO360 ADS6525M is a 6.5-inch car-audio midrange speaker designed to bring vocal and instrumental detail into a custom vehicle sound system. It is intended for listeners building or upgrading systems that need dedicated midrange output rather than a full-range replacement speaker. Its compact 6.5-inch format supports use in many door-panel and custom-pod applications where a focused midrange driver is desired.\u003c\/p\u003e\u003cp\u003eWith 325 watts RMS power handling and 650 watts maximum power handling, the ADS6525M is made for amplified car-audio setups with appropriate power matching. The driver is positioned for clear, assertive midrange reproduction at higher listening levels. Matching amplifier output carefully to the RMS rating is the practical way to use its stated power capability.\u003c\/p\u003e\u003cp\u003eA dual voice coil design with a stated 4-ohm configuration provides wiring flexibility when planning a multi-speaker installation. This can be useful in systems where the amplifier, speaker count, and final load need to be considered together. Confirm the final wiring load with the amplifier manufacturer before installation.\u003c\/p\u003e\u003cp\u003eThe speaker uses a black press-paper cone and cloth-edge suspension. This combination is specified to keep the moving assembly lightweight while supporting controlled midrange reproduction. An oversized motor structure is also part of the driver design for its intended high-output car-audio role.\u003c\/p\u003e\u003cp\u003eA robust steel basket provides the mounting structure for the ADS6525M. The speaker is suited to door panels, custom speaker pods, and performance-oriented car-audio builds where a dedicated midrange driver is part of the system plan. Because it is a midrange speaker, system design should account for the other drivers and crossover strategy needed for the desired overall frequency coverage.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e325W RMS Handling:\u003c\/strong\u003e Supports use with a suitably matched amplified system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e650W Maximum Power:\u003c\/strong\u003e Provides a stated short-term maximum power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Midrange Format:\u003c\/strong\u003e Fits applications designed for a 6.5-inch driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Voice Coil Design:\u003c\/strong\u003e Offers flexibility when planning speaker wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress-Paper Cone:\u003c\/strong\u003e Uses a lightweight black paper-cone construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteel Basket Structure:\u003c\/strong\u003e Provides a robust frame for mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ADS6525M combines a black press-paper cone, cloth-edge suspension, oversized motor structure, and steel basket. These confirmed construction elements support its role as a dedicated midrange driver in a vehicle audio system. The speaker is finished in black.\u003c\/p\u003e\u003cp\u003eVerify vehicle mounting clearance, mounting-hole dimensions, and electrical compatibility before ordering, as cutout and mounting-depth measurements are not confirmed. The speaker is described for door panels, custom pods, and competition-oriented systems; use wiring appropriate for its dual voice coil configuration and confirm the final impedance load against the amplifier's specifications. For a balanced system, plan the remaining frequency ranges with compatible drivers and suitable crossover settings.\u003c\/p\u003e","brand":"AUDIO360","offers":[{"title":"Default Title","offer_id":47970383200419,"sku":"ADS6525M (MIDRANGE)","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71cC_WIyWzL.jpg?v=1786151827"},{"product_id":"audio360-ads835-8-inch-car-subwoofer-1000w-max-power-4-ohm-impedance-compact-design-for-enhanced-bass-performance","title":"AUDIO360 ADS835 8-Inch 4-Ohm Car Subwoofer","description":"\u003cp\u003eThe AUDIO360 ADS835 is an 8-inch car subwoofer designed to add low-frequency output where installation space is limited. Its compact format suits vehicle audio systems using compact to mid-size subwoofer enclosures. With a 4-ohm nominal impedance, it is intended for use with compatible aftermarket amplification.\u003c\/p\u003e\u003cp\u003eRated at 500 watts RMS and 1,000 watts maximum power, the ADS835 is built for systems that need a dedicated bass driver rather than relying only on full-range door speakers. It can help reproduce the lower musical range with more presence and impact. Proper amplifier gain setting and enclosure selection remain important to its performance.\u003c\/p\u003e\u003cp\u003eThe ADS835 is suited to drivers building a first subwoofer system, replacing an existing 8-inch woofer, or fitting bass into a space-conscious installation. Its 8-inch diameter can be practical when a larger subwoofer is not appropriate for the available enclosure or vehicle layout. The 4-ohm configuration supports straightforward matching with an amplifier rated to operate at that load.\u003c\/p\u003e\u003cp\u003eA reinforced cone and surround provide the driver construction specified for this model. This design is intended to support repeated woofer movement during low-frequency playback. The shallow 3.15-inch mounting depth can also help where rear clearance behind the mounting panel is restricted.\u003c\/p\u003e\u003cp\u003eThe ADS835 can be used in either sealed or ported enclosures. A sealed enclosure is appropriate for a more controlled bass character, while a ported enclosure can prioritize additional low-frequency output when properly designed. Its 7.09-inch cutout diameter should be verified against the planned baffle before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W RMS Power Handling:\u003c\/strong\u003e Supports amplifier matching around its continuous power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,000W Maximum Power:\u003c\/strong\u003e Provides the listed peak power-handling specification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Subwoofer:\u003c\/strong\u003e Fits compact bass-system and replacement applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible aftermarket amplifier configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow Mounting Depth:\u003c\/strong\u003e Requires only 3.15 inches of rear clearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed or Ported Use:\u003c\/strong\u003e Allows enclosure selection for system goals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ADS835 uses a reinforced cone and surround, with a circular 8-inch driver layout. Its compact dimensions are intended for installations where enclosure volume and mounting clearance are important considerations. The driver is specified for in-car audio use and is listed as a passive wired subwoofer.\u003c\/p\u003e\u003cp\u003ePlan the enclosure and amplifier around the subwoofer's 4-ohm impedance and 500-watt RMS rating. Confirm a 7.09-inch mounting cutout and at least 3.15 inches of mounting depth before cutting a panel. Use either a properly designed sealed or ported enclosure, and have an experienced installer handle wiring, amplifier setup, and gain adjustment if needed.\u003c\/p\u003e","brand":"AUDIO360","offers":[{"title":"Default Title","offer_id":47970383528099,"sku":"ADS835","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71FZAXRRtfL.jpg?v=1786151837"},{"product_id":"avital-3103l","title":"Avital 3103L 1-Way Vehicle Security System with Two Remotes","description":"\u003cp\u003eThe Avital 3103L is a 1-way vehicle security system designed to add alarm protection and remote keyless-entry convenience to a compatible vehicle. It combines remote arm\/disarm control with intrusion monitoring, parking-light confirmation, and a panic function. The system is intended for professional installation.\u003c\/p\u003e\u003cp\u003eThis system suits drivers who want straightforward security features without a two-way display remote or remote-start operation. Its two included 4-button transmitters provide lock, unlock, auxiliary, and panic commands from up to a stated 1\/4-mile range. When connected to the vehicle, the system can also control power door locks and supported convenience functions.\u003c\/p\u003e\u003cp\u003eThe 3103L provides audible and visual alarm feedback through the vehicle’s siren and flashing parking lights. The impact sensor distinguishes lighter Warn Away impacts from heavier impacts that trigger a full alarm response. Door and ignition triggers add further monitored points when properly integrated during installation.\u003c\/p\u003e\u003cp\u003eSecurity technology includes Code Hopping transmission, which changes transmitter codes with each use, plus Nuisance Prevention Circuitry to reduce repeated false-trigger sequences. The system can be configured for active or passive arming, and it supports Silent Mode for a temporarily chirp-free arm or disarm command. A status LED provides visual operating and diagnostic information inside the vehicle.\u003c\/p\u003e\u003cp\u003eThe Avital 3103L can serve as a security and convenience upgrade for vehicles with compatible electrical systems. Its two auxiliary outputs can be used with professionally installed options such as trunk release, window automation, or another supported convenience feature. The optional starter-interrupt circuit adds another layer of theft deterrence when installed and configured by the dealer.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Way Remote Control:\u003c\/strong\u003e Two 4-button transmitters provide direct security and convenience commands.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp To 1\/4-Mile Range:\u003c\/strong\u003e Allows operation from up to 1,320 feet under stated conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpact Sensor:\u003c\/strong\u003e Detects lighter impacts and heavier alarm-triggering impacts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Keyless Entry:\u003c\/strong\u003e Controls compatible power door locks when professionally connected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Auxiliary Outputs:\u003c\/strong\u003e Supports connected functions such as trunk release or convenience accessories.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarter Interrupt:\u003c\/strong\u003e Provides an added theft-deterrence function when installed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe 3103L uses an in-vehicle security controller, a status LED, and two 1-way LED transmitters with internal antennas. The remote layout is built around dedicated lock, unlock, auxiliary, and panic commands, while the system records trigger information for diagnostic feedback. Its Power Saver Mode reduces LED activity after extended armed or Valet periods to help lower vehicle-battery current draw.\u003c\/p\u003e\u003cp\u003eProfessional installation is required because the system must be wired and configured for the vehicle’s electrical architecture, door locks, parking lights, triggers, and optional outputs. Have the installer identify the Valet button location, verify alarm zones, and configure any desired passive-arming, horn, trunk-release, window-control, or starter-interrupt functions. Auxiliary features and power-lock operation require compatible vehicle connections and may require additional parts or labor.\u003c\/p\u003e","brand":"AVITAL","offers":[{"title":"Default Title","offer_id":47970393751715,"sku":"3103L","price":50.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/619_RoqtyhL.jpg?v=1786152460"},{"product_id":"avital-3103lx","title":"Avital 3103LX 1-Way Vehicle Security System","description":"\u003cp\u003eThe Avital 3103LX is a 1-way vehicle security system designed to add remote-controlled protection and keyless-entry convenience to a compatible vehicle. It combines arming, disarming, starter-interrupt capability, an impact sensor, and flashing parking-light confirmation. It is intended for drivers seeking a dedicated security upgrade rather than a remote-start system.\u003c\/p\u003e\u003cp\u003eTwo included 1-way, 4-button transmitters provide control from up to a stated 1\/4-mile range. The remotes support lock\/arm, unlock\/disarm, panic, and auxiliary functions through a simple button layout. This makes the system suitable for everyday access and security control without relying on a factory key fob alone.\u003c\/p\u003e\u003cp\u003eThe 3103LX uses an impact sensor to detect vehicle impacts and includes Nuisance Prevention Circuitry to help limit repetitive alarm triggers from the same source. A starter interrupt adds a theft-deterrent layer, while Panic mode can activate the alarm for vehicle location or attention. When armed, the system uses horn and parking-light feedback as configured during installation.\u003c\/p\u003e\u003cp\u003eRemote keyless entry and ignition-controlled door locks support a more integrated vehicle-security experience when connected to compatible factory door-lock circuits. The system also provides two auxiliary outputs for installer-configured convenience functions, such as an optional trunk-release application. Silent arm and disarm operation can temporarily suppress confirmation honks.\u003c\/p\u003e\u003cp\u003eThe Avital 3103LX is best used as a professionally installed security foundation for vehicles that need alarm, locking, and visual-status functions. Its programmable passive arming and valet mode add practical flexibility for daily driving and service visits. Installation should be planned around the vehicle's existing electrical, door-lock, trunk, hood, and lighting connections.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Way Security System:\u003c\/strong\u003e Provides remote-controlled vehicle arming and disarming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo 4-Button Remotes:\u003c\/strong\u003e Gives two users direct control of core functions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp To 1\/4-Mile Range:\u003c\/strong\u003e Extends remote operation beyond close proximity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarter Interrupt:\u003c\/strong\u003e Adds a theft-deterrent layer against unauthorized starting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpact Sensor:\u003c\/strong\u003e Detects impacts and supports alarm response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Auxiliary Outputs:\u003c\/strong\u003e Supports installer-configured convenience accessories and functions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe system is built around a vehicle-mounted security control system and two compact 1-way transmitters. Each transmitter has an internal antenna, a transmit-status LED, and dedicated command buttons for security and convenience functions. The design relies on vehicle-side visual and audible confirmations, including flashing parking lights and horn feedback when those circuits are connected.\u003c\/p\u003e\u003cp\u003eProfessional installation is required because the system interfaces with the vehicle electrical system and may be connected to door locks, parking lights, starter-interrupt circuitry, sensors, and optional auxiliary functions. Confirm vehicle compatibility and any required integration parts with the installer before purchase. Ask the installer to identify the Valet switch location and configure passive arming, lock behavior, and auxiliary outputs for the intended use.\u003c\/p\u003e","brand":"AVITAL","offers":[{"title":"Default Title","offer_id":47970393784483,"sku":"3103LX","price":40.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/51dn-mQllJL.jpg?v=1786152462"},{"product_id":"avital-5308l","title":"Avital 5308L 2-Way Remote Start Security System","description":"\u003cp\u003eThe Avital 5308L is a vehicle remote start and security system designed to add everyday convenience while helping monitor key vehicle entry points. It combines remote engine starting, keyless-entry control, alarm functions, and command confirmation in one professionally installed system. It is intended for fuel-injected vehicles and is designed for installation by an authorized dealer.\u003c\/p\u003e\u003cp\u003eA 2-way LCD remote provides visual status feedback when supported commands are received by the vehicle, helping the user confirm actions such as locking, arming, or remote starting. A separate 1-way four-button remote is also included for straightforward system control. The 2-way remote can provide audible or vibration notifications for system pages and alarm events.\u003c\/p\u003e\u003cp\u003eThe security side of the 5308L includes an impact sensor, starter interrupt, six-tone siren, flashing parking-light output, and panic\/car-locator function. Light impacts can trigger a Warn Away response, while heavier impacts can trigger a full alarm response. Connected door, trunk, hood, ignition, and optional sensor inputs can be monitored through the system configuration.\u003c\/p\u003e\u003cp\u003eRemote start is designed to let the vehicle run for a programmed period before driving, which can be useful when climate settings have been preset. Available run-time settings are 12, 24, or 60 minutes, and the system includes automatic shutdown monitoring for conditions such as brake application, an open hood, or an expired run time. Timer Mode and a temperature-based timer option provide additional cold-weather operating flexibility when configured by the installer.\u003c\/p\u003e\u003cp\u003eThe 5308L fits an upgrade path for drivers who want conventional RF remote operation with the option to add compatible Directed by VOXX SmartStart Pro functionality. Three auxiliary outputs allow a dealer to configure supported convenience or expansion functions, such as an optional trunk-release application. Vehicle-specific wiring, interface requirements, and supported functions should be confirmed by the installer before purchase.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way LCD Remote:\u003c\/strong\u003e Provides visual confirmation and configurable audible or vibration status notifications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Start:\u003c\/strong\u003e Starts compatible fuel-injected vehicles for a programmed run period.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpact Sensor:\u003c\/strong\u003e Detects light Warn Away and heavier full-alarm impacts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarter Interrupt:\u003c\/strong\u003e Adds a security function intended to help deter unauthorized starting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree Auxiliary Outputs:\u003c\/strong\u003e Supports dealer-configured convenience or expansion functions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmartStart Pro Compatibility:\u003c\/strong\u003e Supports integration with compatible Directed by VOXX SmartStart Pro equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe system uses a compact control-module-based design with a windshield-mounted Control Center that integrates the in-vehicle antenna, status LED, and valet\/control button. The included 2-way remote uses an LCD status display, internal antenna, programming button, command buttons, and USB charging port. The 1-way remote uses an internal antenna, transmit LED, and command buttons for core system operation.\u003c\/p\u003e\u003cp\u003eProfessional installation is required because connection methods, security monitoring, remote-start operation, door-lock integration, and any vehicle data or immobilizer interface needs vary by vehicle. The installer should verify fuel-injection compatibility, configure safety shutdown inputs, and confirm which auxiliary, lock-control, timer, and SmartStart Pro functions can be supported. Remote start should never be used in an enclosed or partially enclosed area, and Garage Mode should be enabled when the vehicle is being serviced or stored in a garage.\u003c\/p\u003e","brand":"AVITAL","offers":[{"title":"Default Title","offer_id":47970393850019,"sku":"5308L","price":139.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61y9MhyJBtL.jpg?v=1786152466"},{"product_id":"crunch-gp-1000-2","title":"Crunch GP-1000.2 2-Channel Car Audio Amplifier","description":"\u003cp\u003eThe Crunch GP-1000.2 is a two-channel car audio amplifier designed to add external amplification to a vehicle sound system. It can power a pair of speakers in stereo or drive a compatible subwoofer through its bridged mono configuration. This flexibility makes it suitable for focused speaker upgrades, bass additions, or mixed system layouts.\u003c\/p\u003e\u003cp\u003eCrunch lists output ratings of 2 x 500 watts at 2 ohms, 2 x 250 watts at 4 ohms, and 1 x 1,000 watts bridged at 4 ohms. The amplifier can operate in stereo, bridged mono, or stereo\/bridged mono simultaneously. Its Class A\/B topology is intended for systems that prioritize conventional full-range amplification and installation versatility.\u003c\/p\u003e\u003cp\u003eA variable electronic crossover with a 12 dB-per-octave slope helps tailor the amplified signal to the speakers being used. Selectable full-range, high-pass, and low-pass crossover modes support common speaker and subwoofer applications. A built-in bass control and switchable bass boost settings provide additional low-frequency adjustment.\u003c\/p\u003e\u003cp\u003eThe GP-1000.2 accepts low-level RCA input and high-level speaker input, allowing it to work with many aftermarket or factory-source systems. Its low-noise preamplifier circuit is designed to process incoming source signals before amplification. RCA output connections can also pass signal to a second amplifier in an expanded system.\u003c\/p\u003e\u003cp\u003eCrunch equips this model with SPEED-FET MOSFET output devices, a pulse-width-modulated power supply, and a QTD aluminum heat sink. Nickel-plated brass terminals and screw-down connections support secure wiring connections. LED protection diagnostics provide visible indication of overload and speaker-short protection events.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Channel Configuration:\u003c\/strong\u003e Powers a stereo speaker pair or supports a bridged subwoofer setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Operating Modes:\u003c\/strong\u003e Supports stereo, bridged mono, or simultaneous stereo\/bridged mono operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Electronic Crossover:\u003c\/strong\u003e Helps direct appropriate frequencies to speakers or subwoofers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh- and Low-Level Inputs:\u003c\/strong\u003e Connects to RCA-equipped or factory-radio audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitchable Bass Boost:\u003c\/strong\u003e Offers 0, +6, and +12 dB bass adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection LED Diagnostics:\u003c\/strong\u003e Indicates overload and speaker-short protection conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GP-1000.2 uses a black and red chassis with a QTD aluminum heat sink for thermal management. Its Class A\/B circuit design includes SPEED-FET MOSFET output technology and a pulse-width-modulated power supply. Nickel-plated brass terminals and screw-down connectors are used for the power and speaker connections.\u003c\/p\u003e\u003cp\u003eMount the amplifier securely in a location with adequate ventilation and do not install it upside down. The installation guide specifies 4 AWG power and ground cable connections, 12 AWG speaker-terminal wiring, and a 20A fuse; the battery-side power cable must be fused within 18 inches of the battery. Set the input level from minimum and use the crossover mode and frequency controls to match the connected speakers or subwoofer.\u003c\/p\u003e","brand":"CRUNCH","offers":[{"title":"Default Title","offer_id":47970398830755,"sku":"GP-1000-2","price":51.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/6180Shlj6qL_849f5f1b-73b8-4e9b-8052-1abca0af5a51.jpg?v=1786152711"},{"product_id":"crunch-gp-1500-1","title":"Crunch GP-1500.1 1500W Monoblock Car Amplifier","description":"\u003cp\u003eThe Crunch GP-1500.1 Ground Pounder is a single-channel car amplifier designed to power a dedicated subwoofer system. Its mono configuration concentrates amplifier output on low-frequency reproduction rather than full-range speaker channels. It is intended for vehicle audio upgrades that need separate amplification for bass.\u003c\/p\u003e\u003cp\u003eThis amplifier is suited to listeners building a subwoofer-focused system with either an aftermarket or compatible factory audio source. RCA inputs support conventional aftermarket head-unit connections, while speaker-level inputs provide an integration option when RCA outputs are unavailable. A wired bass remote is included for in-vehicle adjustment of the low-frequency level.\u003c\/p\u003e\u003cp\u003eCrunch lists the GP-1500.1 at 1 x 750 watts at 4 ohms and 1 x 1500 watts at 2 ohms. The amplifier operates in mono only and is specified for 2-ohm or 4-ohm speaker loads. Its 10 Hz to 500 Hz frequency response and adjustable filtering are tailored to subwoofer duty.\u003c\/p\u003e\u003cp\u003eBuilt-in tuning controls allow the installation to be matched to the subwoofer and the rest of the sound system. The variable electronic crossover uses a 12 dB-per-octave slope, while the subsonic filter is adjustable from 10 Hz to 40 Hz. Bass boost is switchable between 0, +6, and +12 dB, and phase adjustment covers 0 to 180 degrees.\u003c\/p\u003e\u003cp\u003eThe GP-1500.1 uses Crunch SPEED-FET MOSFET output components, a pulse-width-modulated power supply, and an aluminum QTD heat sink. It can serve as the bass amplifier in a system that retains factory audio or adds an aftermarket receiver. Proper power wiring, grounding, fusing, and a subwoofer load compatible with the amplifier's published ratings are essential for installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMono Subwoofer Amplifier:\u003c\/strong\u003e Uses one channel for dedicated low-frequency speaker operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2- and 4-Ohm Ratings:\u003c\/strong\u003e Published power ratings support common subwoofer wiring configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Electronic Crossover:\u003c\/strong\u003e Helps set the frequency range sent to the subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Subsonic Filter:\u003c\/strong\u003e Limits ultra-low frequencies from 10 Hz to 40 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh- and Low-Level Inputs:\u003c\/strong\u003e Supports RCA sources and compatible factory speaker-level signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Bass Remote:\u003c\/strong\u003e Provides convenient bass-level adjustment from the driver's seat.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe amplifier has a black and red finish with an aluminum heat sink using Crunch Quick Thermal Dispersion Technology. It uses nickel-plated brass terminals and screw-down connectors for its electrical and speaker connections. LED diagnostic indicators monitor overload and speaker-short protection conditions.\u003c\/p\u003e\u003cp\u003eMount the amplifier on a solid surface with ventilation around the heat sink and away from excess heat or moisture. Use 4 AWG power and ground wiring at the amplifier terminals, 12 AWG speaker wire at the speaker terminals, and the specified two 25A fuses. Connect a subwoofer system with a final nominal impedance of 2 or 4 ohms, then set gain, crossover, subsonic filter, phase, and bass boost conservatively during setup.\u003c\/p\u003e","brand":"CRUNCH","offers":[{"title":"Default Title","offer_id":47970398896291,"sku":"GP-1500-1","price":69.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61LB-R5r5DL_756c559a-ee12-4068-8781-36049a769971.jpg?v=1786152715"},{"product_id":"crunch-gp-1500-4","title":"Crunch GP-1500.4 4-Channel Car Amplifier","description":"\u003cp\u003eThe Crunch GP-1500.4 is a four-channel Class A\/B car audio amplifier designed to add external power and system flexibility to a vehicle sound system. It can drive four speakers in stereo or support bridged channel pairs for higher-power applications. This makes it suitable for upgrading factory or aftermarket speaker systems while retaining control over system configuration.\u003c\/p\u003e\u003cp\u003eWith output ratings of 4 x 185 watts at 4 ohms and 4 x 375 watts at 2 ohms, the GP-1500.4 is built for systems using compatible full-range speakers. It can also bridge into two 4-ohm loads at 750 watts per channel pair. The amplifier supports four-channel stereo, dual stereo bridged, stereo plus bridged mono, and dual bridged mono operating modes.\u003c\/p\u003e\u003cp\u003eThe built-in variable electronic crossover helps tailor the signal sent to connected speakers. Selectable full-range, high-pass, and low-pass modes allow installers to configure channel pairs for component speakers, coaxial speakers, or compatible subwoofer duty. Variable high-pass and low-pass controls cover a 40 to 400 Hz range.\u003c\/p\u003e\u003cp\u003eThe amplifier accepts both RCA low-level and speaker-level inputs, providing connection options for aftermarket receivers and many factory audio systems. Its adjustable 0.2 to 9V input sensitivity range supports level matching to the source unit. A low-noise preamplifier circuit is used ahead of the amplifier section.\u003c\/p\u003e\u003cp\u003eCrunch equips the GP-1500.4 with SPEED-FET MOSFET output components, a pulse-width-modulated power supply, and an aluminum heat sink using Quick Thermal Dispersion technology. Switchable bass boost provides 0, +6, or +12 dB settings. The compact chassis can serve as the power stage for a four-speaker upgrade or a mixed system using stereo speakers and bridged channels.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Channel Design:\u003c\/strong\u003e Powers up to four speakers from one chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Stable Outputs:\u003c\/strong\u003e Delivers 375 watts per channel at 2 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridged Channel Pairs:\u003c\/strong\u003e Provides two 750-watt outputs into 4 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Electronic Crossover:\u003c\/strong\u003e Select high-pass, low-pass, or full-range operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh- And Low-Level Inputs:\u003c\/strong\u003e Connects with factory or aftermarket source units.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitchable Bass Boost:\u003c\/strong\u003e Offers 0, +6, and +12 dB settings.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GP-1500.4 uses a black and red aluminum heat-sink chassis with Class A\/B circuitry. Its power section incorporates a high-energy PWM power supply and SPEED-FET MOSFET components. Nickel-plated brass terminals with screw-down connections provide the amplifier's power and speaker connection points.\u003c\/p\u003e\u003cp\u003eMount the amplifier in a secure, ventilated location away from moisture and excessive heat. Use up to 4 AWG power and ground wire, use speaker wire up to 12 AWG at the amplifier terminals, and protect the power connection with appropriate fusing. Configure each channel pair for full-range, high-pass, or low-pass use, and maintain a 2-ohm minimum load per unbridged channel or a 4-ohm minimum load when bridged.\u003c\/p\u003e","brand":"CRUNCH","offers":[{"title":"Default Title","offer_id":47970398961827,"sku":"GP-1500-4","price":65.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71JMGioEtNL.jpg?v=1786152718"},{"product_id":"crunch-sa-1100-4","title":"Crunch SA-1100.4 4-Channel Class AB Car Amplifier","description":"\u003cp\u003eThe Crunch SA-1100.4 is a four-channel Class AB car amplifier designed to add dedicated amplification to a factory or aftermarket audio system. It can power front and rear speakers from four channels or be configured to bridge channel pairs for higher-output two-channel applications. Its selectable operating modes make it suitable for straightforward speaker upgrades as well as mixed speaker-and-subwoofer system layouts.\u003c\/p\u003e\u003cp\u003eAt its published output ratings, the SA-1100.4 delivers 40 watts per channel into 2 ohms or 30 watts per channel into 4 ohms. When two channel pairs are bridged into 4-ohm loads, it provides 60 watts per bridged channel pair. This flexibility helps match the amplifier to common full-range speaker configurations without requiring separate amplifiers for every setup.\u003c\/p\u003e\u003cp\u003eThe amplifier uses Class AB topology with a pulse-width-modulated power supply and Crunch SPEED-FET MOSFET output-device technology. A low-noise preamplifier circuit and RCA signal connections support clean signal transfer from compatible source units. High-level inputs also allow integration with source units that do not provide RCA preamp outputs.\u003c\/p\u003e\u003cp\u003eBuilt-in crossover controls allow the amplifier to be tuned for full-range speakers, high-pass applications, or low-pass applications. Separate crossover controls for channel pairs 1\/2 and 3\/4 make it possible to configure different speaker roles in the same installation. The selectable bass control provides an additional low-frequency adjustment option when system tuning calls for it.\u003c\/p\u003e\u003cp\u003eThe SA-1100.4 fits naturally into an entry-level or replacement amplifier upgrade path for vehicles needing more control than a head unit's internal amplifier can provide. It includes RCA input and output connections for signal routing to another amplifier, helping support expandable systems. Its combination of stereo, bridged, and mixed-mode operation gives installers multiple ways to allocate its four channels.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Channel Class AB Design:\u003c\/strong\u003e Powers up to four speakers from one chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Operating Modes:\u003c\/strong\u003e Supports stereo, bridged, and mixed-channel configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Electronic Crossover:\u003c\/strong\u003e Helps direct appropriate frequencies to connected speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Level Inputs:\u003c\/strong\u003e Connects with factory radios lacking RCA outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRCA Input And Output:\u003c\/strong\u003e Supports low-level signal input and amplifier expansion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection Status Indicators:\u003c\/strong\u003e Lighted diagnostics monitor overload and speaker-short conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe SA-1100.4 uses an aluminum QTD heat sink intended to disperse operating heat, along with nickel-plated brass connection terminals and screw-down connectors. Its Class AB circuit design uses a pulse-width-modulated power supply and SPEED-FET MOSFET output devices. LED diagnostic indicators are provided for overload and speaker-short protection monitoring.\u003c\/p\u003e\u003cp\u003eMount the amplifier securely in a ventilated location and do not install it upside down. It accepts low-level RCA input or high-level speaker input through the supplied harness, with RCA output available for another amplifier. Use the 4 AWG power and ground terminals, 12 AWG speaker terminals, a 30A fuse, and set the input level and crossover controls to suit the connected speakers and source unit.\u003c\/p\u003e","brand":"CRUNCH","offers":[{"title":"Default Title","offer_id":47970399289507,"sku":"SA-1100-4","price":56.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61FzKW6YyrL.jpg?v=1786152733"},{"product_id":"gravity-premium-6-5-speakers-230w-gr-1686h","title":"Gravity GR-1686H 6.5\" 2-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Gravity GR-1686H is a pair of 6.5-inch 2-way coaxial car speakers designed to replace worn or basic factory door speakers. It provides a straightforward upgrade path for vehicles that accept 6.5-inch speakers. Its full-range coaxial format combines the woofer and tweeter into each speaker assembly for simplified installation.\u003c\/p\u003e\u003cp\u003eWith 230 watts maximum power handling per pair, the GR-1686H is intended for everyday in-car listening with either a compatible factory radio or an appropriately matched aftermarket system. The 4-ohm impedance supports common automotive speaker applications. Its 90 dB sensitivity rating is specified for efficient output from modest power sources.\u003c\/p\u003e\u003cp\u003eThe speaker uses a Nomex and silk cone woofer construction to support controlled midrange and low-frequency reproduction. A soft-dome tweeter is integrated into the coaxial design to reproduce upper-frequency detail. The specified 60 Hz to 20 kHz frequency response covers the core range of music, speech, and general entertainment playback.\u003c\/p\u003e\u003cp\u003eA 15-ounce magnet and 25 mm voice coil are specified for the GR-1686H. These components form the motor and moving-coil structure that drives the speaker cone. The design is suited to replacement and entry-level custom car-audio installations where space is limited.\u003c\/p\u003e\u003cp\u003eThe GR-1686H is a practical choice for cars, trucks, and SUVs with compatible 6.5-inch speaker locations. It can be used as a direct speaker replacement or as part of a broader system upgrade with a compatible head unit or amplifier. Confirm vehicle mounting dimensions, connector fitment, and available mounting depth before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Coaxial Format:\u003c\/strong\u003e Combines woofer and tweeter functions in each speaker for a compact full-range replacement solution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Speaker Design:\u003c\/strong\u003e Separates low\/midrange and high-frequency reproduction through dedicated driver elements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e230W Maximum Handling:\u003c\/strong\u003e Provides a stated maximum power capacity of 230 watts per pair.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNomex And Silk Cone:\u003c\/strong\u003e Uses the specified cone materials for responsive everyday music playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90 dB Sensitivity:\u003c\/strong\u003e Supports useful output with compatible factory radios and moderate aftermarket power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches the common nominal impedance used by many automotive audio systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GR-1686H uses a 15-ounce magnet and 25 mm voice coil in a compact 6.5-inch speaker platform. Its coaxial layout places the tweeter within the woofer assembly, helping it fit applications where separate component-speaker mounting locations are not available. Spade-style speaker terminals are specified for connection.\u003c\/p\u003e\u003cp\u003eVerify that the vehicle accepts 6.5-inch speakers and confirm mounting depth, cutout diameter, screw locations, and door-panel clearance before purchasing. Use vehicle-specific adapter brackets or wiring harnesses when required, and match the speakers to a compatible 4-ohm radio or amplifier output. Product listings identify a pair of speakers with speaker wire, screws, and a user manual; contents should be checked upon receipt.\u003c\/p\u003e","brand":"GRAVITY","offers":[{"title":"Default Title","offer_id":47970400632995,"sku":"GR-1686H","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61MHu1k21BL.jpg?v=1786152805"},{"product_id":"pair-gravity-6x9-inch-4-way-380-watts-coaxial-car-speakers-cea-rated-6996h","title":"Gravity GR-6996H 6x9\" 4-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Gravity GR-6996H is a pair of 6x9-inch, 4-way coaxial car speakers intended to replace compatible factory door or rear-deck speakers. It provides a practical option for drivers whose original speakers have become worn, quiet, or distorted. The 4-ohm design is suited to typical automotive speaker circuits.\u003c\/p\u003e\u003cp\u003eThese speakers use a 4-way coaxial layout to combine multiple driver elements within each 6x9-inch assembly. Their published 30 Hz to 22 kHz frequency response is designed to cover bass, midrange, and high-frequency content from a single speaker location. A 92 dB sensitivity rating supports efficient output with compatible factory radios or aftermarket amplification.\u003c\/p\u003e\u003cp\u003eGravity lists peak power handling of 380 watts total for the pair, with 175 watts peak per speaker. Peak ratings describe short-duration handling rather than continuous power, so amplifier selection should be based on the amplifier's actual output and clean setup. RMS power handling is not published for this model.\u003c\/p\u003e\u003cp\u003eThe GR-6996H uses silver alpha cellulose cones with moisture-resistant rubber surrounds. A Neo Mylar soft-dome tweeter is integrated into the coaxial design for high-frequency reproduction. The speaker assembly also includes a 20-ounce magnet and 25 mm voice coil.\u003c\/p\u003e\u003cp\u003eFor an upgrade path, the GR-6996H can be used with a compatible 4-ohm factory head unit or aftermarket amplifier. Its spade terminals simplify speaker-wire connection, while the stamped-steel basket supports the driver structure. Confirm vehicle-specific 6x9-inch fitment, mounting depth, mounting-hole pattern, and clearance before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Coaxial Format:\u003c\/strong\u003e Fits applications designed for compatible 6x9-inch car speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Way Speaker Design:\u003c\/strong\u003e Combines multiple driver elements in each speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches the common nominal impedance used in car audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e92 dB Sensitivity:\u003c\/strong\u003e Supports efficient output from compatible source units or amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilver Alpha Cellulose Cone:\u003c\/strong\u003e Provides the primary cone material for the woofer section.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30 Hz–22 kHz Response:\u003c\/strong\u003e Published range covers low, midrange, and high frequencies.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GR-6996H combines silver alpha cellulose cones, moisture-resistant rubber surrounds, a Neo Mylar soft-dome tweeter, and an anti-resonant stamped-steel basket. Each speaker uses a 25 mm voice coil and 20-ounce magnet structure. These construction details are intended for automotive use where vibration and changing cabin conditions are common.\u003c\/p\u003e\u003cp\u003eUse the supplied speaker wire, screws, and spade-terminal connections as appropriate for the vehicle and installation. Verify that the vehicle accepts 6x9-inch speakers and check mounting depth, grille clearance, terminal clearance, and mounting-hole alignment before ordering or cutting. Match polarity at both speakers and avoid exceeding the speakers' published peak-power claims with a distorted or improperly adjusted signal.\u003c\/p\u003e","brand":"GRAVITY","offers":[{"title":"Default Title","offer_id":47970400862371,"sku":"GR-6996H","price":56.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/81gln7yedNL_f1d9755c-bbda-43fb-9965-60ffe87c71e1.jpg?v=1786152819"},{"product_id":"gravity-gr-eqp11","title":"Gravity GR-EQP11 1\/2-DIN 4-Band Car Parametric Equalizer","description":"\u003cp\u003eThe Gravity GR-EQP11 is a 1\/2-DIN car-audio signal processor that combines four-band parametric equalization with dedicated front, rear, and subwoofer outputs. It is designed for systems that need more control over tonal balance and subwoofer integration than a head unit’s basic tone controls can provide. A master volume control supports output levels up to 9 volts RMS.\u003c\/p\u003e\u003cp\u003eThis equalizer is suited to vehicle owners and installers building an amplified system with separate full-range and subwoofer signal paths. Its front, rear, and sub outputs provide a practical way to route processed signal to compatible amplifiers. The AUX\/MAIN input selector also supports choosing between the unit’s available input sources.\u003c\/p\u003e\u003cp\u003eThe GR-EQP11 uses a four-band parametric EQ section with up to 12 dB of boost or cut. Each band has a specified bandwidth, while the high-frequency section includes shelving adjustment. These controls allow more deliberate correction or tailoring of the system’s frequency balance.\u003c\/p\u003e\u003cp\u003eFor bass-system setup, the GR-EQP11 includes separate subwoofer level control and subwoofer frequency selectors. This allows the subwoofer channel to be adjusted independently from the front and rear outputs. The result is a more manageable way to balance low-frequency output with the rest of the system.\u003c\/p\u003e\u003cp\u003eAn onboard 30-volt bipolar switching power supply supports the unit’s signal-processing section, and gold-plated RCA input and output connectors are provided for signal connections. Night illumination helps make the controls easier to locate in low-light conditions. Its compact 1\/2-DIN format is intended for custom dash, console, or panel installations.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp To 9V RMS Output:\u003c\/strong\u003e Provides a higher-voltage preamp signal for compatible amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Band Parametric EQ:\u003c\/strong\u003e Lets you target and adjust multiple parts of the audio spectrum.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 dB Boost\/Cut:\u003c\/strong\u003e Provides meaningful adjustment range for each EQ band.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront, Rear And Sub Outputs:\u003c\/strong\u003e Routes processed signal to separate amplifier channels or zones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubwoofer Level And Frequency Controls:\u003c\/strong\u003e Helps balance bass output within the overall system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNight Illumination:\u003c\/strong\u003e Makes the control panel easier to use after dark.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GR-EQP11 has a black metal enclosure and a compact 1\/2-DIN form factor. Its control layout is designed around master level, equalization, and subwoofer adjustment functions. Gold-plated RCA connectors are used for the signal inputs and outputs.\u003c\/p\u003e\u003cp\u003eInstall the unit in a secure 1\/2-DIN-compatible custom location with access to its controls, then connect it to compatible RCA-level source and amplifier connections. Use the AUX\/MAIN selector to choose the desired input and set the master, EQ, and subwoofer controls gradually during system tuning. Installation hardware, wiring, and included accessories are not confirmed in the available product information.\u003c\/p\u003e","brand":"GRAVITY","offers":[{"title":"Default Title","offer_id":47970401353891,"sku":"GR-EQP11","price":41.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/a_999e4635-0e68-49cf-85a1-002385a3c0f5.jpg?v=1786152834"},{"product_id":"gravity-vgc1000pl-backup-camera-cmos-cvbs-dynamic-parking-lines-universal-rca-connection-waterproof-license-plate-rear-view-camera-black","title":"Gravity VGC1000PL License Plate Backup Camera","description":"\u003cp\u003eThe Gravity VGC1000PL is a universal rear-view backup camera designed to add a clear rearward view to compatible vehicle video systems. It mounts at the license plate area for a discreet installation that does not require a vehicle-specific camera location. The camera is intended for drivers of cars, trucks, and SUVs who want added visual assistance while reversing.\u003c\/p\u003e\u003cp\u003eIts CMOS camera design delivers a CVBS composite-video signal through an RCA connection. This makes it suited to aftermarket stereos and other displays with a compatible RCA camera input. The analog video format supports straightforward integration where a conventional composite camera connection is required.\u003c\/p\u003e\u003cp\u003eThe VGC1000PL includes dynamic parking guidelines to help provide a visual reference while maneuvering. These moving guidelines are designed to respond with steering input, helping the driver judge the intended reversing path in tighter parking situations. The wide-angle lens further expands the visible area behind the vehicle to help reduce blind spots.\u003c\/p\u003e\u003cp\u003eA low-profile black license-plate-mount housing gives the camera a clean, integrated appearance at the rear of the vehicle. Its weather-resistant construction is designed for exterior use in changing road and weather conditions, including exposure to rain and dust. This makes it a practical option for everyday vehicles that need a permanently mounted rear camera.\u003c\/p\u003e\u003cp\u003eFor a complete backup-camera upgrade, pair the VGC1000PL with a compatible display or head unit that accepts a composite RCA camera input. It is a useful fit for systems being upgraded with an aftermarket receiver, as well as select factory-display applications that have the required video input. Proper mounting, routing, and connection to the vehicle's reverse-camera system are needed for dependable operation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCMOS Camera Sensor:\u003c\/strong\u003e Produces a CVBS composite-video signal for compatible vehicle displays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRCA Video Connection:\u003c\/strong\u003e Connects to head units and monitors with an RCA camera input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Parking Guidelines:\u003c\/strong\u003e Provides moving visual guides to assist with reversing maneuvers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide-Angle Lens:\u003c\/strong\u003e Expands rearward coverage to help reduce blind spots.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLicense Plate Mount:\u003c\/strong\u003e Positions the camera neatly at the rear license plate area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather-Resistant Housing:\u003c\/strong\u003e Built for exterior installation and routine exposure to the elements.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe VGC1000PL uses a compact black housing designed to blend with a vehicle's license plate area. Its exterior-oriented, weather-resistant construction is intended to handle normal exposure to rain, dust, and daily driving conditions. The low-profile layout helps preserve a clean rear-end appearance while adding a rear-view camera.\u003c\/p\u003e\u003cp\u003eInstall the camera at the rear license plate location and connect its RCA video lead to a compatible display or head unit with a composite camera input. Confirm that the receiving unit supports a CVBS\/RCA camera signal before installation, especially when working with a factory system. Professional installation can be helpful when routing wiring through body panels or integrating the camera with the vehicle's reverse operation.\u003c\/p\u003e","brand":"GRAVITY","offers":[{"title":"Default Title","offer_id":47970402336931,"sku":"VGC1000PL","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71JQ2sQfFhL.jpg?v=1786152895"},{"product_id":"gravity-vgc820pl","title":"Gravity VGC820PL License Plate Backup Camera","description":"\u003cp\u003eThe Gravity VGC820PL is a license-plate-mounted backup camera designed to add a rear-facing video view to compatible vehicle displays. It uses a CMOS camera and CVBS video signal with an RCA connection for use with many aftermarket and select factory stereo systems. This makes it a practical option for drivers looking to add reversing visibility without changing the vehicle’s exterior appearance dramatically.\u003c\/p\u003e\u003cp\u003eBuilt for cars, trucks, and SUVs, the VGC820PL helps provide a broader view behind the vehicle while backing up. Its wide-angle lens is intended to reduce rear blind spots during parking and low-speed maneuvering. The compact black housing mounts at the license plate area for an integrated, low-profile look.\u003c\/p\u003e\u003cp\u003eThe camera features dynamic moving parking guidelines intended to adjust with steering input. These on-screen lines can help a driver judge vehicle path and positioning when reversing into parking spaces or navigating confined areas. Compatibility of the dynamic-guideline function should be verified with the receiving display and vehicle installation.\u003c\/p\u003e\u003cp\u003eVideo is delivered through a standard CVBS connection and RCA output, supporting straightforward integration with head units or monitors that accept a composite rear-camera signal. The camera itself does not provide audio functions; its role is to supply rear-view video to a compatible display. It is suited to systems being upgraded with a dedicated camera input.\u003c\/p\u003e\u003cp\u003eGravity specifies weather-resistant construction for everyday exterior use around the license plate area. The design is intended to handle exposure to rain, dust, and normal driving conditions. For a complete installation, confirm that the vehicle’s display supports a CVBS camera input and plan wiring appropriate for the vehicle.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCMOS Camera:\u003c\/strong\u003e Provides a rear-facing video feed for compatible displays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCVBS Video Output:\u003c\/strong\u003e Supports composite video connections used by many head units.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRCA Connectivity:\u003c\/strong\u003e Connects to compatible camera inputs with an RCA connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Guidelines:\u003c\/strong\u003e Displays moving parking lines intended to follow steering input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide-Angle Lens:\u003c\/strong\u003e Expands the visible area behind the vehicle while reversing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLicense Plate Mount:\u003c\/strong\u003e Installs at the license plate area for a discreet appearance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe VGC820PL uses a low-profile black housing designed for exterior installation at the vehicle’s license plate area. Its weather-resistant construction is intended for exposure to rain, dust, and routine driving conditions. The compact mounting approach helps preserve a clean, factory-style exterior presentation.\u003c\/p\u003e\u003cp\u003eInstall the camera where it has a clear rearward view and route its RCA video connection to a compatible CVBS camera input on the head unit or monitor. Verify the display’s camera-input compatibility before installation, particularly if using a factory radio. Because vehicle wiring and dynamic-guideline integration can vary, professional installation may be useful for vehicles with complex factory electronics.\u003c\/p\u003e","brand":"GRAVITY","offers":[{"title":"Default Title","offer_id":47970402435235,"sku":"VGC820PL","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/a_9618443b-0ee2-412b-a89d-bc2d22ce065b.jpg?v=1786152899"},{"product_id":"hifonics-bxipro1-0","title":"Hifonics BXIPRO1-0 Digital Bass Enhancement Processor","description":"\u003cp\u003eThe Hifonics BXIPRO1-0 is a digital bass enhancement processor designed for car audio systems using RCA-level signal connections. It is installed between the source unit and the next signal-stage component, such as a crossover, equalizer, or amplifier. Its bass-driver circuit is designed to recreate low-frequency information and add it back into the audio signal path.\u003c\/p\u003e\u003cp\u003eThis processor is intended for listeners building or upgrading a subwoofer-equipped vehicle audio system. It provides adjustable bass restoration controls to help tailor low-frequency response to the vehicle, speaker placement, enclosure, and music source. A dash-mount remote lets the driver adjust bass output from the front seat.\u003c\/p\u003e\u003cp\u003eThe BXIPRO1-0 uses balanced RCA inputs to help minimize induced noise and supports input signals up to 15V RMS. Its high-headroom PWM power supply and 13.2V peak maximum output level support integration with a range of aftermarket amplifiers and signal processors. The unit also includes a bass maximizer indicator and power-on LED for at-a-glance status feedback.\u003c\/p\u003e\u003cp\u003eTwo onboard controls adjust the bass-restoration effect. The Sweep control selects the center frequency from 27Hz to 63Hz, while the Width control adjusts the affected frequency range around that center point. These controls allow the processor to be set around the response characteristics of the subwoofer system rather than applying one fixed bass contour.\u003c\/p\u003e\u003cp\u003eA dash-mounted control provides sub-volume adjustment and a variable subsonic control from 35Hz to 80Hz. The subsonic adjustment can help reduce very low-frequency content below the useful range of a subwoofer system. For a complete installation, the processor needs vehicle power, ground, remote turn-on, RCA input and output connections, plus an amplifier and compatible speakers or subwoofer.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBass Driver Circuit:\u003c\/strong\u003e Recreates and injects low-frequency information into the signal path.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Sweep:\u003c\/strong\u003e Selects a bass-restoration center frequency from 27Hz to 63Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth Control:\u003c\/strong\u003e Adjusts how broad a frequency range receives processing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDash-Mount Remote:\u003c\/strong\u003e Provides convenient sub-volume and subsonic adjustments from the driver's seat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced RCA Inputs:\u003c\/strong\u003e Help minimize induced noise in the incoming audio signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Headroom PWM Supply:\u003c\/strong\u003e Supports stable processor operation in a vehicle audio system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe BXIPRO1-0 uses a compact steel chassis with panel-mount RCA input and output connections. Its control layout includes onboard Sweep and Width knobs, bass maximizer LEDs, and a power-on LED. The included dash remote adds a separate bass-level control with its own indicator.\u003c\/p\u003e\u003cp\u003eInstall the BXIPRO1-0 inline before a crossover when one is used, connecting its RCA outputs to the next component in the signal chain. Wire the unit to constant 12V power, chassis ground, and a 12V remote-turn-on lead, then connect the dash remote. Secure it in a dry location away from excessive heat, moisture, and physical damage, and set amplifier gain and processor controls carefully during system setup.\u003c\/p\u003e","brand":"HIFONICS","offers":[{"title":"Default Title","offer_id":47970408169635,"sku":"BXIPRO1-0","price":48.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61uhEuV7-EL.jpg?v=1786153177"},{"product_id":"hifonics-bxipro2-0","title":"HIFONICS BXIPRO2-0 Digital Bass Enhancement Processor","description":"\u003cp\u003eThe HIFONICS BXIPRO2-0 is a digital bass enhancement processor for car audio systems. It is designed to restore and reinforce low-frequency information within an audio signal before it reaches an amplifier. This makes it a practical addition for listeners who want more control over bass impact in an aftermarket system.\u003c\/p\u003e\u003cp\u003eThe processor uses a Bass Driver circuit to recreate and inject low-frequency content into the signal path. Its bass equalization circuitry shapes the restored bass for the connected speaker system. A bass output control helps manage the processed low-frequency signal level.\u003c\/p\u003e\u003cp\u003eThe BXIPRO2-0 is intended for systems using external amplification and signal-level connections. Balanced inputs and input noise-reduction circuitry are included to support cleaner signal transfer in a vehicle environment. Its specified frequency response extends from 10 Hz to 35 kHz.\u003c\/p\u003e\u003cp\u003eA dash-mount remote allows bass adjustment from the driver's seat. The remote includes an LED bass-level indicator, while the processor has illuminated controls and bass maximizer indicators. A master volume control is also located on the processor chassis.\u003c\/p\u003e\u003cp\u003eThis processor can fit into an upgrade path between a source unit and amplifier, especially in systems with a dedicated subwoofer amplifier. The PFM subsonic filter switch provides another way to tailor low-frequency behavior for the system. It is a signal processor rather than an amplifier, so a compatible amplified audio system is required for use.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBass Driver Circuit:\u003c\/strong\u003e Recreates and adds low-frequency information to the audio signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13.2V Maximum Output:\u003c\/strong\u003e Provides a high-level processed signal for compatible amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced Inputs:\u003c\/strong\u003e Helps reduce unwanted noise in the signal connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePFM Subsonic Filter:\u003c\/strong\u003e Lets installers fine-tune very low-frequency response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDash-Mount Remote:\u003c\/strong\u003e Places bass adjustment within reach of the driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParametric Bass Equalization:\u003c\/strong\u003e Shapes restored bass for the connected audio system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe BXIPRO2-0 uses a compact chassis measuring 7.75 inches wide, 6 inches deep, and 1.5 inches high. Blue-illuminated controls, an illuminated HIFONICS logo, power LED indicators, and bass maximizer indicators provide visual operating feedback. Its high-headroom PWM power supply supports the processor's signal-output design.\u003c\/p\u003e\u003cp\u003eInstall the processor in a secure, accessible location between the source signal and the amplifier system, with the dash remote mounted where adjustments can be made safely. Use the balanced signal inputs and follow the supplied operating instructions for power, ground, remote, signal, and output connections. Set the master volume, bass controls, and PFM subsonic filter gradually to match the capability of the connected amplifier and speakers.\u003c\/p\u003e","brand":"HIFONICS","offers":[{"title":"Default Title","offer_id":47970408235171,"sku":"BXIPRO2-0","price":57.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/811rCILG3uL.jpg?v=1786153182"},{"product_id":"hifonics-bxx4000-1d","title":"Hifonics BXX4000.1D Brutus 4000W Mono Subwoofer Amplifier","description":"\u003cp\u003eThe Hifonics BXX4000.1D Brutus is a mono Class D amplifier designed to power car subwoofer systems. It delivers up to 4,000 watts RMS into a 1-ohm load, with lower rated output options at 2 and 4 ohms. It is intended for installations that need a dedicated amplifier for low-frequency reproduction rather than full-range speakers.\u003c\/p\u003e\u003cp\u003eThis amplifier suits builders matching one or more subwoofers to a high-output mono channel. Its variable low-pass crossover and subsonic filter allow the bass range to be tailored to the subwoofers and enclosure. An adjustable bass boost and phase control provide further system-tuning options.\u003c\/p\u003e\u003cp\u003eThe BXX4000.1D uses Super D\/Class D amplification and an Ultra-Fi MOSFET output circuit. Hifonics also specifies an NGSD digital chip design as part of its power-amplification platform. The design is paired with an aluminum alloy heat sink for heat dissipation during operation.\u003c\/p\u003e\u003cp\u003eFor signal integration, the amplifier uses RCA audio inputs and provides RCA connections for master\/slave linking. It is strappable with a second compatible amplifier, allowing a linked pair to be used in a larger bass system. A wired remote bass-level control is included for convenient adjustment from the listening position.\u003c\/p\u003e\u003cp\u003eThe amplifier is 1-ohm stable and requires subwoofers to be wired to a supported final impedance. It includes power and protect status indicators, built-in diagnostics, and protection circuitry for thermal, overload, and speaker-short conditions. Its high-current installation requirements make careful power, ground, fuse, and ventilation planning important.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4,000W RMS at 1 Ohm:\u003c\/strong\u003e Supplies substantial mono power for a properly matched subwoofer load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper D\/Class D Topology:\u003c\/strong\u003e Provides an efficient amplifier platform for dedicated bass systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Low-Pass Filter:\u003c\/strong\u003e Adjusts the subwoofer passband from 35 to 250 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubsonic Filter:\u003c\/strong\u003e Filters frequencies from 15 to 35 Hz for enclosure-aware tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrappable Operation:\u003c\/strong\u003e Supports master\/slave linking with another compatible amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Bass Remote:\u003c\/strong\u003e Lets the user adjust bass level from the front seat.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe BXX4000.1D is a single-channel amplifier with an aluminum alloy heat sink, Ultra-Fi MOSFET circuitry, and LED power\/protect indicators. Its control panel includes adjustments for input level, low-pass crossover, subsonic filtering, bass boost, and phase. RCA input and linking connections support use in dedicated subwoofer systems and paired-amplifier configurations.\u003c\/p\u003e\u003cp\u003eInstall the amplifier in a secure, dry, well-ventilated location with space around the heat sink. Use appropriately sized power and ground wiring, an external 275A fuse, and a solid chassis ground; the listed power and ground terminal capacity is 0 AWG. Match the connected subwoofer wiring to a final load no lower than 1 ohm, then set gain and filters carefully to suit the enclosure and system.\u003c\/p\u003e","brand":"HIFONICS","offers":[{"title":"Default Title","offer_id":47970408431779,"sku":"BXX4000-1D","price":257.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71dC86EjckL_aa20b5ab-c938-4fcc-884c-dbcdec1cc1f6.jpg?v=1786153193"},{"product_id":"hifonics-zg-1200-4","title":"Hifonics ZG-1200-4 4-Channel Class AB Car Amplifier","description":"\u003cp\u003eThe Hifonics ZG-1200.4 is a four-channel Class A\/B car amplifier built to add dedicated power to an upgraded vehicle audio system. It can drive front and rear speakers from four channels or support bridged channel pairs where a system calls for higher output. This makes it a practical choice for listeners replacing low-power factory amplification or building a multi-speaker system around an aftermarket source unit.\u003c\/p\u003e\u003cp\u003eRated output is 150 watts RMS per channel at 4 ohms and 300 watts RMS per channel at 2 ohms. For systems using bridgeable channel pairs, it is rated at 600 watts RMS x 2 at 4 ohms. Its 10 Hz to 22 kHz frequency response supports full-range speaker applications as well as filtered subwoofer-duty channel pairs.\u003c\/p\u003e\u003cp\u003eThe amplifier uses a Class A\/B architecture with a PWM MOSFET power supply. An aluminum heat sink helps dissipate heat, while the integrated electronic crossover lets the installer direct appropriate frequencies to connected speakers. Variable high-pass and low-pass filtering provide useful control when combining component speakers, coaxials, or subwoofers in one installation.\u003c\/p\u003e\u003cp\u003eSignal integration is flexible for many aftermarket and factory-radio upgrade paths. The ZG-1200.4 provides RCA inputs, speaker-level inputs, and a 2-channel or 4-channel input-mode selection. Its 0.2 to 6V input-sensitivity range allows the gain structure to be matched to the source unit rather than used as a volume control.\u003c\/p\u003e\u003cp\u003eThis amplifier fits well in a system that needs one chassis to power four speakers, or two speakers plus a bridged subwoofer channel pair. A selectable full-range, high-pass, or low-pass crossover arrangement helps tailor the output to the connected drivers. Proper impedance matching, secure power wiring, ventilation, and careful gain setup are important for reliable operation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Channel Design:\u003c\/strong\u003e Powers up to four speaker channels from one amplifier chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridgeable Outputs:\u003c\/strong\u003e Supports two bridged 4-ohm channel-pair outputs when needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass A\/B Amplification:\u003c\/strong\u003e Delivers full-range amplification for speaker-system upgrades.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Crossovers:\u003c\/strong\u003e High-pass and low-pass filters help match output to drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Signal Inputs:\u003c\/strong\u003e Includes RCA and speaker-level input options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Heat Sink:\u003c\/strong\u003e Helps manage heat during installed operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ZG-1200.4 uses an aluminum heat sink, angled molded connection terminals, and nickel-plated RCA input connections. Its PWM MOSFET power supply is designed to provide stable amplifier power, while onboard LED protection diagnostics monitor overload and speaker-short conditions. The amplifier measures approximately 14.25 inches long, 8.25 inches wide, and 2.375 inches high.\u003c\/p\u003e\u003cp\u003eMount the amplifier on a secure, dry surface with sufficient airflow and keep it away from moisture. Use 4 AWG power and ground connections, a 50A fuse, and 12 AWG speaker wiring at the amplifier terminals; the main power cable should be fused within 18 inches of the battery. Disconnect the vehicle battery before installation, set gain low before initial setup, and use 4-ohm loads for bridged operation.\u003c\/p\u003e","brand":"HIFONICS","offers":[{"title":"Default Title","offer_id":47970409578659,"sku":"ZG-1200-4","price":109.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/51QfslKLfSL_ee7a2210-fa73-41b4-9628-0b81bd9c16fb.jpg?v=1786153259"},{"product_id":"hifonics-zg-1200-1d","title":"Hifonics ZG-1200.1D Zeus Gamma Monoblock Class D Amplifier","description":"\u003cp\u003eThe Hifonics ZG-1200.1D is a mono Class D car amplifier designed to power a subwoofer system from a compact chassis. It provides rated output at 4-, 2-, and 1-ohm loads, allowing it to suit a range of single- and multiple-subwoofer wiring configurations. It is intended for drivers building or upgrading the low-frequency section of a vehicle audio system.\u003c\/p\u003e\u003cp\u003eWith 300 watts RMS at 4 ohms, 600 watts RMS at 2 ohms, and 1,200 watts RMS at 1 ohm, the ZG-1200.1D offers a clear progression for matching a compatible subwoofer load. Its 10 Hz to 500 Hz frequency response is focused on bass-duty operation. The monoblock layout keeps setup straightforward when the amplifier is dedicated to subwoofer output.\u003c\/p\u003e\u003cp\u003eThe amplifier includes adjustable bass-management controls to help integrate a subwoofer with the rest of the system. A variable low-pass crossover, subsonic filter, phase control, and bass boost allow practical adjustment for enclosure type, speaker placement, and system tuning. The input level control is used to match the amplifier to the source unit's output voltage.\u003c\/p\u003e\u003cp\u003eClass D amplification helps keep the ZG-1200.1D compact while delivering substantial mono output. Its PWM MOSFET power supply and aluminum heat sink support stable operation and heat dissipation. The chassis also uses angled terminals for more accessible wiring connections.\u003c\/p\u003e\u003cp\u003eThis amplifier can accept either RCA-level or high-level audio signals, making it suitable for many aftermarket and factory-radio upgrade paths. A bass remote is included for convenient adjustment from the driver's seat. RCA output connections can also pass signal to an additional amplifier when expanding the system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMono Class D Design:\u003c\/strong\u003e Dedicated single-channel amplification for a subwoofer system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Ohm Rated Output:\u003c\/strong\u003e Delivers up to 1,200 watts RMS at 1 ohm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Low-Pass Filter:\u003c\/strong\u003e Helps blend subwoofer output with higher-frequency speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubsonic Filter:\u003c\/strong\u003e Reduces ultra-low frequencies below the selected point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Level Inputs:\u003c\/strong\u003e Supports integration with radios lacking RCA outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Bass Remote:\u003c\/strong\u003e Provides convenient adjustment of bass level from the cabin.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ZG-1200.1D uses an aluminum heat sink, PWM MOSFET power supply, nickel-plated RCA inputs, and angled connection terminals. Its compact 10.125-inch-long chassis is intended for secure mounting on a solid surface with adequate ventilation. The amplifier should be kept away from moisture and locations that trap excessive heat.\u003c\/p\u003e\u003cp\u003eUse a compatible subwoofer wiring configuration that presents a 1-, 2-, or 4-ohm final load, then match the amplifier's rated output to the subwoofer system's RMS handling. Hifonics specifies 4-gauge power cable and a 60-amp fuse for this model; the main power cable should be fused within 18 inches of the battery. Connect the chassis ground to clean bare metal close to the amplifier, set the input level from minimum, and tune crossover controls carefully to avoid distortion.\u003c\/p\u003e","brand":"HIFONICS","offers":[{"title":"Default Title","offer_id":47970409611427,"sku":"ZG-1200-1D","price":106.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/51HjiCgPgvL_13c78bf9-760d-433e-ab79-5c4dda8b40d8.jpg?v=1786153261"},{"product_id":"hifonics-zg-1200-2","title":"Hifonics ZG-1200.2 2-Channel Class A\/B Car Amplifier","description":"\u003cp\u003eThe Hifonics ZG-1200.2 is a two-channel car audio amplifier designed to add substantial external power to a speaker system or a compatible subwoofer setup. It is a Class A\/B model with stereo and bridged-mono operating options, making it suitable for a range of upgrade paths. Use it when a factory or aftermarket receiver needs more output capability than its built-in amplifier can provide.\u003c\/p\u003e\u003cp\u003eIn stereo operation, the ZG-1200.2 is rated for 300 watts RMS per channel at 4 ohms or 600 watts RMS per channel at 2 ohms. It can also be bridged to deliver 1,200 watts RMS into a 4-ohm mono load. These configurations allow it to support two speakers, two subwoofers within its impedance limits, or one appropriately matched bridged subwoofer.\u003c\/p\u003e\u003cp\u003eThe amplifier uses a PWM MOSFET power supply with Hifonics Simpatico Coil Design to support stable power delivery. Its Class A\/B architecture is paired with a low-noise preamplifier circuit and a stated 10 Hz to 22 kHz frequency response. Variable crossover controls and bass adjustment help tailor the amplifier for full-range speakers or a subwoofer-focused installation.\u003c\/p\u003e\u003cp\u003eIntegration is practical for both aftermarket and factory audio systems. The ZG-1200.2 provides RCA inputs along with speaker-level inputs, so it can accept either low-level preamp signal or a factory speaker-level signal. RCA outputs are also provided for passing signal to an additional amplifier in a larger system.\u003c\/p\u003e\u003cp\u003eBuilt for conventional vehicle installations, the amplifier uses an aluminum heat sink and angled connection terminals for accessible wiring. LED power and protection diagnostics help identify operating or fault conditions, including overload and speaker-short protection. A 4 AWG power\/ground terminal capacity and 12 AWG speaker terminal capacity support a properly planned installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Channel Class A\/B Design:\u003c\/strong\u003e Powers a stereo speaker pair or supports bridged mono operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,200W RMS Bridged Output:\u003c\/strong\u003e Delivers rated mono power into a 4-ohm bridged load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Electronic Crossovers:\u003c\/strong\u003e Helps match the amplifier to speakers or subwoofers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRCA And Speaker-Level Inputs:\u003c\/strong\u003e Supports aftermarket radios and many factory audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePWM MOSFET Power Supply:\u003c\/strong\u003e Supports stable amplifier power delivery during operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Protection Diagnostics:\u003c\/strong\u003e Indicates power and protection status at the amplifier.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ZG-1200.2 uses an aluminum heat sink to dissipate operating heat and a Class A\/B amplifier platform with a PWM MOSFET power supply. Its nickel-plated RCA inputs, molded connection terminals, and angled terminal layout are intended to support secure, accessible connections. The chassis measures 10.875 inches long, 8.25 inches wide, and 2.375 inches high.\u003c\/p\u003e\u003cp\u003eMount the amplifier on a secure, dry surface with adequate airflow and route power, signal, and speaker wiring carefully through the vehicle. Use 4 AWG-capable power and ground wiring, a properly sized fuse near the battery, and speakers wired within the amplifier's rated impedance limits. For bridged use, connect one 4-ohm load as specified and configure the crossover and input level conservatively before final tuning.\u003c\/p\u003e","brand":"HIFONICS","offers":[{"title":"Default Title","offer_id":47970409644195,"sku":"ZG-1200-2","price":91.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/513aYdJzG_L_f6db2693-51ad-47c1-9766-314641994a89.jpg?v=1786153263"},{"product_id":"infinity-infspkrf697mfus","title":"Infinity INFSPKRF697MFUS 6x9\" 3-Way Car Speakers","description":"\u003cp\u003eThe Infinity Reference REF697MF is a pair of 6 x 9-inch three-way car speakers designed to replace worn or limited factory speakers. They bring dedicated high-frequency drivers and a large oval woofer format to vehicles that use 6 x 9-inch speaker locations. This makes them a practical choice for listeners seeking a more capable full-range speaker upgrade without adding separate component tweeters.\u003c\/p\u003e\u003cp\u003eWith 100 watts RMS power handling and 94 dB sensitivity at 2.83V\/1m, the REF697MF can be used with a compatible factory or aftermarket receiver and can also benefit from external amplification. Its 3-ohm nominal impedance is part of Infinity's True Four Ohm Impedance approach, intended to account for resistance in factory speaker wiring. Match the speakers with an amplifier or receiver that supports their load and power requirements.\u003c\/p\u003e\u003cp\u003eThe three-way design combines a Plus One polypropylene woofer cone, an edge-driven textile dome tweeter, and a textile semi-dome supertweeter. This arrangement extends the stated frequency response from 46 Hz to 30 kHz while separating bass, midrange, and high-frequency duties across dedicated drivers. A selectable tweeter-output setting provides a +3 dB option for installations where high-frequency output needs adjustment.\u003c\/p\u003e\u003cp\u003eInfinity's Plus One woofer-cone architecture uses a larger effective cone area than conventional cones in the same class. The woofer is paired with a hi-roll rubber surround to support cone movement and everyday automotive use. Together, these design details focus on maintaining useful low-frequency output from a speaker that fits common 6 x 9-inch openings.\u003c\/p\u003e\u003cp\u003eThe REF697MF is suited to door, rear-deck, or custom-panel upgrades when vehicle clearance and mounting dimensions are verified first. Its included spacers, mounting screws, speed clips, and foam mounting tape support installation, while grilles are not included. For a complete system upgrade, pair the speakers with an appropriate amplifier, wiring, installation adapters, and vehicle-specific harnesses as needed.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 x 9-Inch Three-Way Design:\u003c\/strong\u003e Uses separate woofer, tweeter, and supertweeter drivers for full-range playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W RMS Power Handling:\u003c\/strong\u003e Supports compatible receiver or amplifier power for stronger output capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One Woofer Cone:\u003c\/strong\u003e Provides increased cone area for efficient low-frequency and midrange reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTextile High-Frequency Drivers:\u003c\/strong\u003e Includes an edge-driven dome tweeter and textile semi-dome supertweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Tweeter Output:\u003c\/strong\u003e Offers a +3 dB setting to tailor high-frequency balance by location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Ohm Nominal Impedance:\u003c\/strong\u003e Designed to work with factory or aftermarket car audio systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe REF697MF uses a Plus One polypropylene woofer cone with a hi-roll rubber surround, plus textile tweeter elements for high-frequency reproduction. Its optimized frame is built around a standard 6 x 9-inch automotive speaker format. The speaker's external dimensions are 9-5\/16 x 6-7\/16 inches, with a total depth of 3-3\/4 inches.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's available mounting cutout, mounting depth, and clearance behind the panel before purchase. The required mounting cutout measures 8-1\/2 x 5-3\/4 inches, and mounting depth is 3-1\/8 inches. The package includes spacers, screws, speed clips, foam tape, and an owner's manual; vehicle-specific wiring harnesses, adapter brackets, and grilles may be required separately.\u003c\/p\u003e","brand":"INFINITY","offers":[{"title":"Default Title","offer_id":47970410660003,"sku":"INFSPKRF697MFUS","price":97.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/51r7kBIo0GL.jpg?v=1786153308"},{"product_id":"infinity-infspkka63xfam","title":"Infinity Kappa 63XF 6.5\" Two-Way Car Speakers","description":"\u003cp\u003eThe Infinity Kappa 63XF is a pair of 6-1\/2-inch two-way car speakers designed for upgrading factory speaker locations. It combines a glass-fiber woofer with an edge-driven silk dome tweeter in a compact full-range speaker format. The set is intended for listeners who want a clearer, more capable replacement speaker while retaining a conventional door or rear-deck installation approach.\u003c\/p\u003e\u003cp\u003eWith 85 watts RMS and 255 watts peak power handling, the Kappa 63XF is suited to systems using either an aftermarket receiver or compatible external amplification. Its 3-ohm impedance and 93dB sensitivity support efficient output in a properly matched system. The stated 45Hz to 40kHz frequency response covers bass, midrange, and extended high-frequency reproduction from each speaker.\u003c\/p\u003e\u003cp\u003eInfinity uses patented Plus One glass-fiber woofer cones for a light, rigid diaphragm with increased cone area. This construction is designed to support low-frequency output while maintaining controlled cone movement. A rubber surround complements the woofer assembly for long-term movement and damping.\u003c\/p\u003e\u003cp\u003eThe 3\/4-inch edge-driven silk dome tweeter is equipped with an oversized voice coil and is rated for response up to 40kHz. Its angled UniPivot design can rotate up to 270 degrees after installation on most applications, allowing the installer to aim high-frequency output toward the listening area. A built-in push-button selector provides 0dB or -3dB tweeter output adjustment for better balance based on speaker location.\u003c\/p\u003e\u003cp\u003eThe Kappa 63XF is a practical choice for replacing compatible 6-1\/2-inch factory speakers in front doors, rear doors, or rear-deck positions. Multi-hole adapter rings and foam gaskets are included to assist with installation, although vehicle-specific fitment should be confirmed before purchase. For best results, verify mounting depth, cutout dimensions, wiring polarity, and amplifier or receiver compatibility with the 3-ohm load.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e85W RMS Handling:\u003c\/strong\u003e Supports properly matched aftermarket receiver or amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Ohm Impedance:\u003c\/strong\u003e Works with audio equipment rated for 3-ohm speaker loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One Glass-Fiber Woofer:\u003c\/strong\u003e Uses a light, rigid cone with increased cone area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilk Dome Tweeter:\u003c\/strong\u003e Provides extended high-frequency response up to 40kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Tweeter Level:\u003c\/strong\u003e Select 0dB or -3dB high-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotatable UniPivot Tweeter:\u003c\/strong\u003e Allows up to 270 degrees of post-installation aiming.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Kappa 63XF uses a glass-fiber woofer cone, rubber surround, and 3\/4-inch edge-driven silk dome tweeter. Its angled tweeter assembly incorporates a push-button level control and UniPivot aiming capability. The speakers are supplied as a pair and include Infinity logo badges and brand stickers in addition to the installation hardware.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle provides a suitable 130mm (5-1\/8-inch) cutout and at least 52.9mm (2-3\/32-inch) mounting depth before installation. Use the included multi-hole adapter rings and foam gaskets where appropriate, and secure the speakers with the supplied screws and speed clips. Connect each speaker with correct polarity and use an amplifier or receiver that is compatible with 3-ohm speakers.\u003c\/p\u003e","brand":"INFINITY","offers":[{"title":"Default Title","offer_id":47970410889379,"sku":"INFSPKKA63XFAM","price":122.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/711I7Th_4_S.jpg?v=1786153321"},{"product_id":"infinity-infspkrf307fus","title":"Infinity REF307F 3.5\" 2-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Infinity REF307F is a pair of 3.5-inch, 2-way coaxial car speakers designed to replace worn or limited factory speakers in compact vehicle locations. Its round 3.5-inch format suits applications where available mounting space is restricted. Each speaker combines a woofer and tweeter in one assembly for a straightforward full-range speaker upgrade.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for drivers who want clearer everyday music reproduction from a compatible factory or aftermarket audio system. With 25 watts RMS power handling per speaker and 91dB sensitivity at 2.83V\/1m, the REF307F is sized appropriately for modest-power amplification. Its 3-ohm nominal impedance is designed to work with typical automotive speaker wiring and compatible source units or amplifiers.\u003c\/p\u003e\u003cp\u003eThe REF307F uses an edge-driven textile tweeter to reproduce high frequencies and a Plus One polypropylene woofer cone for the lower and midrange portions of the signal. The two-way coaxial layout keeps the drivers aligned in a compact assembly. Frequency response is rated at 85Hz to 21kHz, making these speakers suited to upper-range and full-range factory replacement positions rather than dedicated deep-bass duty.\u003c\/p\u003e\u003cp\u003eInfinity's Plus One woofer-cone architecture increases usable cone area compared with conventional cone geometry in its class. In practical terms, the design supports efficient output and low-frequency presence from a small speaker footprint. A rubber surround complements the polypropylene cone for a durable moving assembly.\u003c\/p\u003e\u003cp\u003eThe REF307F can be used as part of a staged factory-system refresh, including dashboard, rear-panel, or other compatible 3.5-inch locations. Its 1-7\/16-inch mounting depth and 3-inch cutout requirement should be checked against the vehicle before purchase. For systems needing stronger low bass or substantially higher output, these speakers can be paired with appropriately matched larger speakers, amplification, or a subwoofer.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.5-Inch Coaxial Format:\u003c\/strong\u003e Combines woofer and tweeter in a compact full-range speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25W RMS Handling:\u003c\/strong\u003e Supports 25 watts of continuous power per speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge-Driven Textile Tweeter:\u003c\/strong\u003e Reproduces high frequencies with a textile dome design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One Woofer Cone:\u003c\/strong\u003e Provides increased cone area within the speaker frame.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Ohm Nominal Impedance:\u003c\/strong\u003e Designed for use with compatible automotive audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Mounting Profile:\u003c\/strong\u003e Uses a 3-inch cutout and 1-7\/16-inch mounting depth.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe REF307F uses polypropylene Plus One woofer cones, rubber surrounds, and edge-driven textile tweeters in a two-way coaxial design. Its compact optimized frame is intended to fit standard 3.5-inch vehicle speaker locations. The pair is finished in black and does not include speaker grilles.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle has sufficient clearance for the 3-7\/16-inch external diameter, 3-inch mounting cutout, and 1-7\/16-inch mounting depth before installation. Observe speaker polarity when connecting the factory wiring or amplifier leads, and match amplifier output conservatively to the 25W RMS-per-speaker rating. The package includes foam mounting tape, but vehicle-specific adapters, wiring harnesses, and mounting hardware may be needed depending on the installation location.\u003c\/p\u003e","brand":"INFINITY","offers":[{"title":"Default Title","offer_id":47970413641891,"sku":"INFSPKRF307FUS","price":51.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61lfOOqLRVL.jpg?v=1786153360"},{"product_id":"infinity-infspkrf607fus","title":"Infinity REF607F (INFSPKRF607FUS) 6.5\" Coaxial Speakers","description":"\u003cp\u003eThe Infinity REF607F is a pair of 6.5-inch, two-way coaxial car speakers designed to replace factory door or rear-deck speakers. It provides a direct speaker-upgrade option for vehicles that use this common size while retaining a compact mounting profile. The set is intended for listeners who want improved detail and output from a factory or aftermarket audio system.\u003c\/p\u003e\u003cp\u003eEach speaker combines a polypropylene woofer with a separate textile dome tweeter in a coaxial layout. This arrangement lets a single mounting location reproduce both midrange and high-frequency information. The edge-driven tweeter is designed to provide clear, smooth high-frequency reproduction, including at higher listening levels.\u003c\/p\u003e\u003cp\u003eInfinity uses a Plus One™ woofer cone design that increases cone area relative to conventional designs in the same speaker class. More active cone area supports efficient output and low-frequency performance from a compact 6.5-inch speaker. A hi-roll rubber surround supports the woofer cone during operation.\u003c\/p\u003e\u003cp\u003eThe REF607F is rated for 60 watts RMS and 180 watts peak power per speaker, with a 53 Hz to 21 kHz frequency response. Its 3-ohm nominal impedance is part of Infinity's True 4 Ohm architecture, intended to work with the resistance of typical vehicle speaker wiring. This makes the speakers suitable for many factory-radio upgrades as well as systems powered by an external amplifier.\u003c\/p\u003e\u003cp\u003eAn adjustable tweeter output setting provides a 3 dB adjustment for adapting the high-frequency level to the speaker location and listener preference. The package includes adapter rings, mounting hardware, foam tape, and an owner's manual to support installation. Verify the factory opening, mounting depth, and required vehicle-specific brackets or harnesses before purchase.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Two-Way Design:\u003c\/strong\u003e Combines woofer and tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W RMS Handling:\u003c\/strong\u003e Supports factory-radio or amplified upgrade systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One™ Woofer Cone:\u003c\/strong\u003e Uses increased cone area for efficient output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTextile Dome Tweeter:\u003c\/strong\u003e Delivers clear, smooth high-frequency response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Level Adjustment:\u003c\/strong\u003e Provides a 3 dB high-frequency adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue 4 Ohm Architecture:\u003c\/strong\u003e 3-ohm speakers account for typical wiring resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe REF607F uses polypropylene woofer cones with hi-roll rubber surrounds and 1-inch edge-driven textile dome tweeters. Its compact round frame has a 6-1\/4-inch external diameter, while the speaker itself has a 5-inch mounting cutout requirement. Grilles are not included with this model.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 6.5-inch round speaker and has at least 2-1\/16 inches of mounting-depth clearance. Use the supplied adapter rings, foam mounting tape, screws, and speed clips as appropriate, but vehicle-specific mounting brackets or wiring harnesses may still be needed. For amplified systems, match the amplifier output appropriately to the 60-watt RMS rating per speaker.\u003c\/p\u003e","brand":"INFINITY","offers":[{"title":"Default Title","offer_id":47970413838499,"sku":"INFSPKRF607FUS","price":68.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61jZvk7_syL.jpg?v=1786153372"},{"product_id":"jbl-jblcelecbrity150","title":"JBL Celebrity 150 Single DIN Digital Media Receiver","description":"\u003cp\u003eThe JBL Celebrity 150 is a Single DIN mechless digital media receiver designed to update a compatible vehicle with modern music playback and hands-free Bluetooth calling. It replaces a traditional CD-based radio with Bluetooth, USB, AUX, SD card, AM, and FM listening options. Its detachable faceplate adds a practical theft-deterrent feature for daily-driven vehicles.\u003c\/p\u003e\u003cp\u003eThis receiver suits drivers who want straightforward source flexibility without needing a touchscreen or disc player. Bluetooth supports both wireless music streaming and hands-free calling, while the front USB, AUX input, and SD\/MMC card slot provide convenient wired and stored-media options. AM\/FM radio remains available for local broadcasts and preset station access.\u003c\/p\u003e\u003cp\u003eBuilt-in amplification is rated at 4 x 20 watts RMS and 4 x 50 watts peak, providing power for four 4-ohm vehicle speakers. The receiver offers a 20 Hz to 20 kHz frequency response and adjustable bass and treble controls for basic system tuning. USB and SD playback specifications include a signal-to-noise ratio of at least 70 dB and channel separation of at least 70 dB.\u003c\/p\u003e\u003cp\u003eFor system expansion, the Celebrity 150 includes two pairs of 4-volt RCA line outputs for front and rear channels. This provides a cleaner signal path for compatible external amplification or processor-equipped installations. The receiver also includes 30 station presets, divided between 18 FM and 12 AM presets.\u003c\/p\u003e\u003cp\u003eThe standard 1 DIN installation format makes this receiver a practical fit for many dash openings designed for a conventional single-height radio. An ISO wiring harness is included to support installation, although some vehicles may require a vehicle-specific harness adapter, antenna adapter, dash kit, or professional integration. It is intended for 12 V negative-ground automotive electrical systems.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle DIN Mechless Design:\u003c\/strong\u003e Fits a standard single-height radio opening without a CD mechanism.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetachable Faceplate:\u003c\/strong\u003e Removable front panel provides an added theft-deterrent measure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth 5.0:\u003c\/strong\u003e Supports wireless music streaming and hands-free phone calls.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple Media Sources:\u003c\/strong\u003e Plays audio through USB, AUX, SD\/MMC, AM, and FM.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Volt RCA Outputs:\u003c\/strong\u003e Two RCA output pairs support front and rear external amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eISO Harness Included:\u003c\/strong\u003e Includes two ISO wiring harnesses for receiver connection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Celebrity 150 uses a compact black Single DIN chassis with a detachable faceplate, LCD display, front-panel control buttons, a volume\/select knob, and accessible AUX, USB, and SD\/MMC connections. Its mechless design omits a disc transport, focusing the receiver on digital media, radio, and Bluetooth functions. JBL specifies a 178 x 50 x 87 mm installation size.\u003c\/p\u003e\u003cp\u003eInstall the receiver only in a compatible 12 V negative-ground vehicle and use the included ISO harnesses as appropriate for the vehicle wiring. A vehicle-specific mounting kit, wiring adapter, and antenna adapter may be needed depending on the factory dash and connector arrangement. For USB and SD playback, use media formatted with the FAT32 file system; pair a phone through Bluetooth for streaming and calling functions.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":47970414395555,"sku":"JBLCELECBRITY150","price":54.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61-NgRgLX2L.jpg?v=1786153399"},{"product_id":"jbl-jblspkcb34f","title":"JBL Club 34F 3.5\" Two-Way Car Speakers","description":"\u003cp\u003eThe JBL Club 34F is a pair of 3-1\/2-inch two-way car speakers designed for compact factory speaker locations. They provide a practical replacement option when original small speakers have become worn, distorted, or lack clarity. With a 3-ohm nominal impedance and 89dB sensitivity, they are engineered for use in compatible vehicle audio systems.\u003c\/p\u003e\u003cp\u003eThese speakers suit drivers upgrading dash, door, or other compact speaker positions where a 3-1\/2-inch format is specified. Their two-way design combines low- and high-frequency reproduction in each speaker, helping simplify an upgrade where separate tweeters are not being added. Vehicle-specific fitment should always be checked before installation.\u003c\/p\u003e\u003cp\u003eThe Club 34F is rated for 25 watts RMS and 75 watts peak power handling per speaker. Its 90Hz to 20kHz frequency response is intended for full-range small-speaker duties, with clear upper-frequency coverage and midrange support. For systems seeking stronger low bass, these speakers can be paired with larger door speakers or a dedicated subwoofer.\u003c\/p\u003e\u003cp\u003eJBL uses its Plus One woofer cone architecture to increase cone area within the available speaker size. The woofer cone is made from acoustically damped, UV-resistant polypropylene to help maintain controlled sound while standing up to vehicle heat and humidity. A larger magnet design supports the speaker's stated power-handling capability.\u003c\/p\u003e\u003cp\u003eThe Club 34F can be used as part of a factory-speaker refresh or within a broader aftermarket system. Its 3-ohm nominal impedance should be matched with a compatible factory radio or amplifier. The pair includes a foam gasket to support installation, while vehicle-specific mounting hardware or adapters may be required depending on the application.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-1\/2-Inch Two-Way Design:\u003c\/strong\u003e Fits applications requiring a compact full-range car speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25W RMS Power Handling:\u003c\/strong\u003e Supports appropriate power from a compatible audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Ohm Nominal Impedance:\u003c\/strong\u003e Designed for compatible factory or aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One Cone Architecture:\u003c\/strong\u003e Increases available woofer cone area in its class.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Resistant Polypropylene Cone:\u003c\/strong\u003e Helps withstand heat and humidity inside a vehicle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4kHz Crossover Point:\u003c\/strong\u003e Divides frequencies between the speaker's two-way drivers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Club 34F uses an acoustically damped polypropylene woofer cone with UV resistance for automotive conditions. JBL's Plus One cone architecture maximizes cone area within the compact 3-1\/2-inch format, while the larger magnet design supports its 25W RMS and 75W peak ratings. The speakers are finished in black.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's speaker opening, mounting depth, terminal clearance, and impedance compatibility before purchase. JBL lists two speakers and one foam gasket in the package; grilles, screws, adapters, and wiring accessories are not listed. Use a compatible car stereo or amplifier and observe correct speaker polarity during installation.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":47970414592163,"sku":"JBLSPKCB34F","price":47.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61O0vg3p84L.jpg?v=1786153409"},{"product_id":"jbl-jblspkcb64fsl","title":"JBL Club 64FSL 6.5\" Shallow-Mount 2-Way Car Speakers","description":"\u003cp\u003eThe JBL Club 64FSL is a pair of shallow-mount 6-1\/2-inch two-way coaxial car speakers designed for vehicles with limited speaker-depth clearance. They provide a practical replacement or upgrade path for factory door, dash, or rear-deck speakers where a conventional-depth 6.5-inch speaker may not fit. Each speaker is rated for 55 watts RMS and 165 watts peak power.\u003c\/p\u003e\u003cp\u003eThis speaker set is suited to drivers seeking a compact full-range upgrade without adding separate tweeters or external passive crossovers. Its coaxial layout combines the woofer and tweeter in each speaker, helping keep installation straightforward. The 3-ohm nominal impedance and 92 dB sensitivity support use with appropriately rated factory or aftermarket audio systems.\u003c\/p\u003e\u003cp\u003eJBL specifies a 55 Hz to 20 kHz frequency response and a 4 kHz crossover point. The result is a two-way design intended to cover bass, midrange, and treble from a single mounting location. For a balanced vehicle system, these speakers can be paired with a compatible head unit or amplifier and, when desired, a separate subwoofer for deeper low-frequency output.\u003c\/p\u003e\u003cp\u003eThe Club 64FSL uses JBL Plus One woofer cone architecture, which increases effective cone area compared with conventional same-size designs. Its acoustically damped, UV-resistant polypropylene cone is built for the heat and humidity encountered in automotive installations. A silk edge-driven dome tweeter handles high-frequency reproduction.\u003c\/p\u003e\u003cp\u003eShallow mounting is the central advantage of this model. The speaker has a 47.7 mm (1.88-inch) mounting depth and a 123.4 mm (4.86-inch) mounting cutout diameter, helping it fit tighter locations. Included multi-hole adapter rings expand mounting options, but vehicle-specific fitment should always be checked before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow-Mount Profile:\u003c\/strong\u003e A 47.7 mm mounting depth helps accommodate locations with limited clearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Coaxial Design:\u003c\/strong\u003e Integrates woofer and tweeter in each speaker for a simpler installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e55W RMS Handling:\u003c\/strong\u003e Supports 55 watts RMS and 165 watts peak power per speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Ohm Impedance:\u003c\/strong\u003e Designed for use with audio equipment rated to drive a 3-ohm speaker load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One Woofer Cone:\u003c\/strong\u003e Uses greater effective cone area for the speaker size.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Resistant Polypropylene Cone:\u003c\/strong\u003e Built to withstand demanding automotive heat and humidity conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Club 64FSL combines a polypropylene woofer cone, rubber surround, large magnet motor structure, and a 1-inch silk edge-driven dome tweeter. Its compact basket and shallow-profile design are tailored for installations where window mechanisms, door panels, or other vehicle components limit mounting depth. The speakers are finished in black and use a coaxial construction rather than separate component-speaker hardware.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's factory opening, available mounting depth, panel clearance, and mounting-hole pattern before purchase. JBL specifies a 123.4 mm mounting cutout diameter, 47.7 mm mounting depth, and 158.0 mm overall speaker diameter; the included multi-hole adapter rings may assist with various 6.5-inch and 6.75-inch applications. Use the supplied foam gasket, screws, and speed clips as applicable, and connect the speakers only to a factory radio or amplifier that is suitable for a 3-ohm nominal load.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":47970414788771,"sku":"JBLSPKCB64FSL","price":57.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61BFPkgOf-L.jpg?v=1786153419"},{"product_id":"jbl-jblspkcb864f","title":"JBL Club 864F 6\" x 8\" Two-Way Car Speakers","description":"\u003cp\u003eThe JBL Club 864F is a pair of 6\" x 8\" two-way coaxial car speakers designed as a direct upgrade for compatible factory speaker locations. It is intended for drivers who want clearer, more detailed sound than worn or basic OEM speakers can provide. With 60 watts RMS power handling and 93 dB sensitivity, it can be used with an aftermarket amplifier or a compatible factory or aftermarket radio.\u003c\/p\u003e\u003cp\u003eThese speakers combine a 6\" x 8\" woofer and an integrated silk dome tweeter in each speaker. Their 65 Hz to 20 kHz frequency response supports midbass, vocals, and high-frequency detail across a broad range of music. The 3-ohm nominal impedance is designed to help the speakers make effective use of available power in many vehicle audio systems.\u003c\/p\u003e\u003cp\u003eJBL's Plus One™ woofer cone architecture increases cone area compared with conventional same-size designs. The acoustically damped, UV-resistant polypropylene cone is built for clean response and durability in automotive heat and humidity. A rubber surround supports controlled woofer movement during normal operation.\u003c\/p\u003e\u003cp\u003eAn edge-driven silk dome tweeter handles upper-frequency reproduction. This design is intended to provide smooth, broad high-frequency response without relying on a separate tweeter installation. The Club 864F is a coaxial solution, making it practical for systems where a compact, full-range replacement speaker is preferred.\u003c\/p\u003e\u003cp\u003eThe Club 864F works well as part of a factory-speaker replacement, a radio upgrade, or an amplified door- or rear-deck speaker system. It is supplied as a pair, so one package can replace two compatible speakers. Because no grilles are included, fitment should be confirmed where an exposed or custom installation is planned.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6\" x 8\" Two-Way Design:\u003c\/strong\u003e Combines woofer and tweeter functions in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W RMS Power Handling:\u003c\/strong\u003e Supports amplifier matching up to its continuous power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One™ Woofer Cone:\u003c\/strong\u003e Provides increased cone area for the speaker size.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilk Dome Tweeter:\u003c\/strong\u003e Delivers smooth high-frequency detail from an integrated tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Resistant Polypropylene Cone:\u003c\/strong\u003e Helps the woofer withstand automotive heat and humidity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Ohm Nominal Impedance:\u003c\/strong\u003e Designed to work efficiently in compatible vehicle audio systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Club 864F uses a polypropylene Plus One™ woofer cone with acoustic damping and UV resistance, paired with a rubber surround and edge-driven silk dome tweeter. Its larger magnet structure supports the rated power handling. The speakers have a black finish and are supplied without grilles.\u003c\/p\u003e\u003cp\u003eConfirm vehicle-specific fitment, mounting opening dimensions, mounting depth, and clearance behind the factory grille before installation. Each package includes two speakers and one foam gasket; installation hardware, wiring adapters, and vehicle-specific mounting brackets are not listed as included. Match the speakers with a compatible radio or amplifier and observe polarity when connecting the factory or aftermarket speaker wiring.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":47970414985379,"sku":"JBLSPKCB864F","price":62.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/51COxEXCcTL.jpg?v=1786153424"},{"product_id":"jbl-jblspkcb964m","title":"JBL Club 964M 6\" x 9\" Three-Way Car Speakers","description":"\u003cp\u003eThe JBL Club 964M is a pair of 6\" x 9\" three-way car speakers for replacing factory speakers or building a more capable vehicle audio system. It is designed for vehicles with a compatible 6\" x 9\" speaker location and enough mounting clearance. With 85 watts RMS power handling per speaker, it can be used with compatible factory audio systems or aftermarket amplification.\u003c\/p\u003e\u003cp\u003eA 93 dB sensitivity rating at 2.83V helps the Club 964M produce useful output from modest power while retaining capacity for an amplified system. Its 50 Hz to 20 kHz frequency response covers low-midbass through high frequencies in one coaxial speaker assembly. The 3-ohm nominal impedance is intended to work with compatible car-audio source units and amplifiers.\u003c\/p\u003e\u003cp\u003eThe Club 964M uses JBL Plus One woofer cone architecture, which provides more cone area than conventional cones of a similar overall size. More effective cone area can support low-frequency output and sensitivity in the available mounting space. The woofer is made with an acoustically damped, UV-resistant polypropylene cone for use in the heat and humidity of a vehicle environment.\u003c\/p\u003e\u003cp\u003eFor high frequencies, the speaker incorporates an edge-driven silk dome tweeter design. This design is intended to provide broad high-frequency coverage with a smooth presentation. The speaker's three-way construction also uses a 3 kHz crossover point specified by JBL.\u003c\/p\u003e\u003cp\u003eThese speakers fit naturally into a front-door, rear-deck, or cargo-area upgrade where a 6\" x 9\" location is available. They can serve as a direct speaker upgrade when factory mounting provisions are suitable, or as part of a system with an aftermarket amplifier. Confirm the vehicle opening, mounting depth, terminal clearance, and any adapter requirements before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Way 6\" x 9\" Design:\u003c\/strong\u003e Combines woofer and high-frequency drivers in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e85W RMS Power Handling:\u003c\/strong\u003e Supports amplifier matching up to 85 watts RMS per speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One Woofer Cone:\u003c\/strong\u003e Provides increased cone area within the speaker frame.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge-Driven Silk Dome Tweeter:\u003c\/strong\u003e Handles high frequencies with broad dispersion characteristics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Resistant Polypropylene Cone:\u003c\/strong\u003e Uses a damped cone material suited to vehicle conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Ohm Nominal Impedance:\u003c\/strong\u003e Matches compatible car stereos and aftermarket amplifiers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Club 964M uses a polypropylene woofer cone, butyl-rubber surround, silk edge-driven dome tweeter, and ferrite magnet motor structure. Its black speaker assembly includes protective grilles for installations that do not retain a factory grille. The design is intended for standard automotive use rather than marine or illuminated installations.\u003c\/p\u003e\u003cp\u003eVerify the mounting location before purchase: the speaker measures 236.5 mm long by 163.0 mm wide, with a 77.8 mm mounting depth and 90.4 mm total depth. Use the supplied mounting hardware only where it suits the vehicle's panel and confirm whether vehicle-specific brackets, harness adapters, or additional wiring are needed. When adding an amplifier, select a compatible channel that is appropriately matched to the speaker's 85W RMS per-speaker rating and 3-ohm nominal impedance.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":47970415050915,"sku":"JBLSPKCB964M","price":86.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61VLun3NvvL.jpg?v=1786153428"},{"product_id":"jbl-jbllegend700","title":"JBL JBLLEGEND700 7\" Double-DIN Multimedia Receiver","description":"\u003cp\u003eThe JBL Legend 700 is a double-DIN digital multimedia receiver built around a 7-inch capacitive touchscreen. It updates a compatible vehicle with smartphone-focused navigation, calling, music playback, and radio access in a single dashboard component. It is intended for drivers who want modern phone integration without giving up traditional AM\/FM listening and wired media connections.\u003c\/p\u003e\u003cp\u003eWireless and wired Apple CarPlay and Android Auto support let compatible phones connect for familiar app access and voice-controlled functions. Bluetooth 5.0 provides a separate option for hands-free calling and wireless music streaming. The receiver also supports USB, an auxiliary input, and a built-in AM\/FM tuner with RDS.\u003c\/p\u003e\u003cp\u003eFor system tuning, the Legend 700 includes a 16-band equalizer with time alignment. These controls allow the installer or listener to adjust tonal balance and account for speaker placement in the vehicle. Dedicated subwoofer controls provide direct management of the subwoofer preamp output level.\u003c\/p\u003e\u003cp\u003eThe built-in amplifier is rated for up to 50 watts maximum per channel, while its measured RMS output is 12 watts x 4 at 12.8V or 14 watts x 4 at 14.4V into 4 ohms. This makes it suitable for powering standard vehicle speakers at moderate levels. For larger systems, its 4Vrms six-channel preamp outputs can feed external front, rear, and subwoofer amplifiers.\u003c\/p\u003e\u003cp\u003eThe receiver is designed as a central source unit for a staged upgrade path. A backup-camera input supports an added rear-view camera, while the included GPS antenna supports its integrated navigation-related connectivity functions. Its main wiring harness, mounting bracket, trim ring, external microphone, and hardware are included for installation planning.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e7-Inch Capacitive Touchscreen:\u003c\/strong\u003e Provides a responsive central interface for media, settings, and smartphone integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless and Wired CarPlay:\u003c\/strong\u003e Connect compatible iPhones for supported navigation, calling, messaging, and audio apps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless and Wired Android Auto:\u003c\/strong\u003e Brings compatible Android phone functions to the in-dash display.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth 5.0:\u003c\/strong\u003e Supports hands-free calls, music streaming, phonebook access, and compatible control profiles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16-Band EQ with Time Alignment:\u003c\/strong\u003e Helps tailor tonal balance and timing for the vehicle’s speaker layout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4V Six-Channel Preamp Outputs:\u003c\/strong\u003e Supplies front, rear, and subwoofer signal connections for external amplifiers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Legend 700 uses a black double-DIN format with a 7-inch capacitive touchscreen and included trim ring. Its front-panel layout combines touchscreen operation with direct access to key receiver functions, including subwoofer level control. JBL specifies the receiver for a double-DIN opening approximately 4 inches tall.\u003c\/p\u003e\u003cp\u003eConfirm vehicle dash compatibility before purchase, as many vehicles require a vehicle-specific dash kit, wiring harness adapter, or interface to retain factory functions. The package includes the main wiring harness, mounting bracket, GPS antenna, external microphone, six screws, quick-start guide, and safety sheet. Install the included external microphone in a position suited to clear hands-free calling, and use the 4V preouts when adding external amplification.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":47970415411363,"sku":"JBLLEGEND700","price":248.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61Ga7riEXwL.jpg?v=1786153447"},{"product_id":"jbl-jblpwsrallybarxl","title":"JBL RALLYBAR XL 35\" Outdoor Vehicle Soundbar","description":"\u003cp\u003eThe JBL RALLYBAR XL is a 35-inch amplified outdoor vehicle soundbar designed for UTVs, golf carts, boats, and other 12-volt recreational vehicles. It combines speakers, passive radiators, Bluetooth streaming, and amplification in one weather-resistant enclosure, reducing the need to build a separate multi-component audio system. Its integrated design is intended for installations where space, exposure to dust, and water resistance matter.\u003c\/p\u003e\u003cp\u003eA built-in Class-D amplifier delivers 300 watts RMS and up to 600 watts peak output. The system uses eight 2.75-inch woofers, two 1-inch tweeters, and four racetrack passive radiators to cover a specified 45 Hz to 40 kHz frequency range. This gives the soundbar a broad, full-range presentation suited to music playback in open-air environments.\u003c\/p\u003e\u003cp\u003eThe RALLYBAR XL supports Bluetooth 5.3, USB music playback, and a 3.5 mm AUX input for connection to a phone, portable player, or compatible head unit. Its source-priority system places USB above Bluetooth and AUX input, allowing a higher-priority active source to interrupt a lower-priority source. Three selectable AUX input gain ranges help match the soundbar to different source-output voltages.\u003c\/p\u003e\u003cp\u003eFor outdoor use, the enclosure carries an IP66 water- and dust-resistance rating. Dynamic RGB lighting and map lights are controlled from the soundbar, with adjustable brightness and selectable effects. The unit also supports Party Mode for two connected Bluetooth devices, with one device playing at a time.\u003c\/p\u003e\u003cp\u003eThe RALLYBAR XL can also serve as the starting point for a larger powersports audio system. Broadcast Mode can distribute the same audio source to compatible JBL RALLYBAR S, RALLYBAR, and RALLYBAR XL soundbars. A variable 2 Vrms AUX output is available for connecting an external powered speaker or powered subwoofer.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W RMS Class-D Amplifier:\u003c\/strong\u003e Built-in amplification eliminates the need for a separate external amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e35-Inch Full-Range Array:\u003c\/strong\u003e Eight woofers, two tweeters, and four passive radiators deliver wide-range playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP66 Protection:\u003c\/strong\u003e Helps protect the soundbar against dust ingress and powerful water jets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth 5.3 Streaming:\u003c\/strong\u003e Streams audio wirelessly from compatible phones and tablets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroadcast Mode:\u003c\/strong\u003e Links compatible JBL RALLYBAR family soundbars for shared audio playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic LED Lighting:\u003c\/strong\u003e Adds music-synchronized RGB lighting plus adjustable map-light settings.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe RALLYBAR XL uses an integrated, weather-resistant soundbar design with sealed connection protection for its line output. Its 35-11\/32-inch enclosure houses the amplifier, drivers, passive radiators, controls, and lighting in one assembly. The included mounting system provides multiple top and rear cleat positions to accommodate different mounting locations.\u003c\/p\u003e\u003cp\u003eInstallation requires connection to a 9.6 to 16 VDC vehicle electrical system using the included 12-foot, 10 AWG power\/ground harness. Mounting hardware includes cleats, clamps, rubber strips, straps, security cables, and tools for supported bar-diameter configurations. Use the AUX input when integrating a head unit, Bluetooth for wireless playback, or a FAT16\/FAT32 USB drive for local music files; an external powered subwoofer or speaker may be connected through the 3.5 mm AUX output.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":47970416623779,"sku":"JBLPWSRALLYBARXL","price":704.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/614ULT5c4jL.jpg?v=1786153516"},{"product_id":"jbl-stage3627fam","title":"JBL Stage3 627F 6.5\" Two-Way Coaxial Car Speakers","description":"\u003cp\u003eThe JBL Stage3 627F is a pair of 6.5-inch, two-way coaxial car speakers designed for replacing compatible factory door or rear-deck speakers. Its no-grille configuration is intended for factory locations that retain the vehicle's original speaker grille or trim. It is a practical option for drivers seeking a straightforward speaker upgrade without changing the head unit.\u003c\/p\u003e\u003cp\u003eEach speaker combines a woofer and dome tweeter in one assembly, helping cover bass, midrange, and high-frequency content from a single factory-style mounting location. JBL rates the pair's speaker design for a 55Hz to 20kHz frequency response and 92dB sensitivity at 2.83V\/1m. The 3-ohm nominal impedance is designed to work with compatible car audio systems.\u003c\/p\u003e\u003cp\u003eJBL's Plus One polypropylene woofer cone architecture moves the surround attachment outward to increase usable cone area. This design is intended to support stronger output from the available mounting diameter, while retaining a durable polypropylene cone material. The edge-driven dome tweeter is engineered for broad, smooth high-frequency response.\u003c\/p\u003e\u003cp\u003eA vented basket frame supports airflow around the motor structure and voice coil during operation. This construction is intended to help manage heat and support reliable operation at higher listening levels. The speakers use a coaxial layout, so separate external crossovers and separately mounted tweeters are not required.\u003c\/p\u003e\u003cp\u003eThe Stage3 627F can be used as a factory-system replacement or as part of an amplified aftermarket setup. JBL lists 45W RMS power handling and includes two speakers in the package. Before ordering, confirm the vehicle's 6.5-inch mounting location, available mounting depth, cutout, and connector or adapter requirements.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in each speaker for a space-efficient factory-location upgrade.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One Woofer Cones:\u003c\/strong\u003e Increased cone area supports efficient output from the available speaker size.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Provides a durable woofer diaphragm for everyday automotive use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge-Driven Dome Tweeter:\u003c\/strong\u003e Helps deliver broad, smooth high-frequency response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented Basket Frame:\u003c\/strong\u003e Helps move heat away from the voice-coil and motor area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo-Grille Configuration:\u003c\/strong\u003e Designed for installations that reuse the vehicle's factory grille or trim.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Stage3 627F uses a polypropylene Plus One woofer cone, dome tweeter, rubber surround, and a rigid vented basket frame. Its black, no-grille design is tailored to factory-style speaker positions where the vehicle's existing panel or grille covers the speaker. JBL specifies a 6.5-inch (160mm) two-way coaxial format with 3-ohm nominal impedance.\u003c\/p\u003e\u003cp\u003eVerify vehicle-specific fitment before installation, including the mounting opening, speaker clearance, and electrical connection style. The listed top-mount depth is 1.91 inches and the listed cutout dimension is 5 inches; adapter brackets or wiring harnesses may be needed depending on the vehicle. Observe positive and negative terminal polarity when wiring both speakers, and use amplification or head-unit power appropriate for the speaker's published ratings.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":47970417213603,"sku":"STAGE3627FAM","price":32.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71OSKb6fV7L.jpg?v=1786153545"},{"product_id":"jbl-stage38627am","title":"JBL STAGE38627AM 5x7\/6x8\" 2-Way Coaxial Speakers","description":"\u003cp\u003eJBL Stage3 8627 speakers are 2-way coaxial car speakers designed for factory-location upgrades in 5 x 7-inch and 6 x 8-inch applications. They provide a practical replacement path for worn or limited factory speakers while retaining a compact, vehicle-friendly form factor. Sold as a pair, they are suited to listeners building a simple speaker upgrade or refreshing an existing car audio system.\u003c\/p\u003e\u003cp\u003eThe Stage3 8627 uses a 3-ohm design and 93 dB sensitivity to make effective use of power from compatible factory radios or aftermarket amplification. With 50 watts RMS power handling per speaker and a 65 Hz to 20 kHz frequency response, it is intended to cover the main music range with clear output. Its two-way coaxial layout keeps the woofer and tweeter together for straightforward installation.\u003c\/p\u003e\u003cp\u003eJBL's Plus One polypropylene woofer cone moves the surround attachment outward to increase usable cone area. This design supports more air movement than a conventional cone of similar overall size and can improve efficiency. It is a useful feature for systems where speaker output and low-frequency presence matter without changing to a larger speaker location.\u003c\/p\u003e\u003cp\u003eAn edge-driven dome tweeter handles high-frequency detail, while the integrated crossover point is specified at 6 kHz. The result is a full-range speaker design intended to separate upper-frequency reproduction from the woofer's main duties. This makes the Stage3 8627 a suitable option for front-door, rear-door, or rear-deck locations that accept the required speaker dimensions.\u003c\/p\u003e\u003cp\u003eThe speaker uses a rigid vented basket designed to help move heat away from the motor structure and voice coil area. This cooling-oriented frame design supports reliable operation during extended listening. For a balanced upgrade, pair the speakers with a compatible head unit or amplifier that is stable with a 3-ohm speaker load and avoid sustained distorted playback.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 x 7 \/ 6 x 8 Fitment:\u003c\/strong\u003e Designed for compatible oval factory speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One Woofer Cone:\u003c\/strong\u003e Uses increased cone area for efficient output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Provides a lightweight, durable woofer diaphragm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge-Driven Dome Tweeter:\u003c\/strong\u003e Handles high-frequency detail in the coaxial assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented Basket Frame:\u003c\/strong\u003e Helps dissipate heat around the motor structure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Stage3 8627 combines a polypropylene Plus One woofer cone, dome tweeter, built-in crossover, and vented basket frame in a compact oval speaker assembly. The basket is engineered for rigidity and airflow around the voice coil area. Its black finish and factory-oriented shape are intended to integrate neatly into compatible vehicle speaker locations.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's speaker opening, mounting depth, mounting-hole pattern, and trim-panel clearance before purchase or installation. These speakers are sold as a pair, and the manufacturer lists two speakers in the box; plan separately for any vehicle-specific wiring adapters, mounting hardware, or brackets your vehicle may require. Connect each speaker with correct polarity to a compatible 3-ohm-stable source, and use power appropriate for its 50-watt RMS rating.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":47970417639587,"sku":"STAGE38627AM","price":32.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71FeH9rO2HL.jpg?v=1786153568"},{"product_id":"jbl-subbpsl2am-jbl","title":"JBL SUBBPSL2AM 8\" Powered Underseat Subwoofer","description":"\u003cp\u003eThe JBL BassPro SL2 is a self-powered 8-inch low-profile subwoofer system designed to add low-frequency output to an existing vehicle audio system without requiring a separate subwoofer enclosure and external amplifier. Its compact footprint is intended to fit under the front seat of many vehicles, making it a practical option when cargo space is limited. The integrated amplifier and enclosure simplify a bass upgrade for factory and aftermarket radios.\u003c\/p\u003e\u003cp\u003eWith 125 watts RMS of built-in Class D amplification, the BassPro SL2 is made for listeners who want more weight and impact from music while keeping the installation compact. Its 35Hz to 120Hz frequency response supports low bass while also allowing the system to blend with full-range door or dash speakers. The shallow-profile 8-inch woofer is housed in a custom-tuned ABS enclosure.\u003c\/p\u003e\u003cp\u003eThe BassPro SL2 provides tuning controls to help match its output to the vehicle and the rest of the audio system. A variable 50Hz to 120Hz crossover lets the installer set the upper-frequency limit of the subwoofer, while the level control adjusts its relative output. Bass Boost is adjustable from 0dB to +9dB at 70Hz for response tailoring.\u003c\/p\u003e\u003cp\u003eInstallation flexibility comes from both low-level RCA and high-level speaker-level inputs. This allows the BassPro SL2 to work with many aftermarket radios as well as factory systems that do not provide dedicated RCA outputs. When using high-level inputs, its input-load switch and audio-sense function support integration with compatible speaker-output signals.\u003c\/p\u003e\u003cp\u003eFor system refinement, the BassPro SL2 includes phase selection, onboard high-pass filters, and limiters. A wired remote bass level control is included for convenient adjustment from the driver’s position. It is a focused solution for compact vehicles and installations where preserving usable interior or cargo space is a priority.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Powered Design:\u003c\/strong\u003e Integrates the subwoofer, enclosure, and amplifier in one compact system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Shallow Woofer:\u003c\/strong\u003e Delivers bass from a low-profile, vehicle-friendly enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e125W RMS Class D Amplifier:\u003c\/strong\u003e Provides built-in amplification with efficient operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Crossover:\u003c\/strong\u003e Adjusts the 50Hz to 120Hz transition to main speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Input Options:\u003c\/strong\u003e Supports RCA low-level and speaker-level source connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Bass Remote:\u003c\/strong\u003e Lets the driver adjust bass level from the cabin.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe BassPro SL2 uses a proprietary shallow-profile 8-inch woofer in an ABS enclosure measuring just 2-13\/16 inches high. Its integrated Class D amplifier is designed to operate efficiently, while onboard high-pass filters and limiters help manage operation at higher listening levels. The enclosure’s compact shape is intended for locations such as beneath a front seat where clearance permits.\u003c\/p\u003e\u003cp\u003eUse the low-level inputs with a radio or processor that has RCA outputs, or use the high-level input harness with speaker-level outputs. The unit requires vehicle power, chassis ground, and a 15A fuse; JBL specifies at least 12 AWG wire for power and ground connections and at least 18 AWG for an optional remote turn-on lead. Mount it securely with the included screws in a location that does not interfere with vehicle operation, wiring, fuel lines, or seat movement.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":47970418622627,"sku":"SUBBPSL2AM (JBL)","price":216.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/6176-2-qdaL.jpg?v=1786153576"},{"product_id":"jvc-kw-m590bt","title":"JVC KW-M590BT Double DIN 6.8\" Digital Media Receiver","description":"\u003cp\u003eThe JVC KW-M590BT is a digital media receiver designed to bring modern smartphone access, hands-free communication, and expandable sound control to an aftermarket car audio system. Its 6.8-inch capacitive touchscreen places key functions within easy reach while retaining AM\/FM radio, Bluetooth audio, USB media playback, and camera connectivity. It is a practical choice for drivers replacing an older factory radio or adding a screen-based interface to a compatible vehicle.\u003c\/p\u003e\u003cp\u003eApple CarPlay and Android Auto connect by USB, providing access to compatible navigation, calling, messaging, music, and voice-control functions through the receiver display. Bluetooth adds wireless music streaming and hands-free calling, while HFP 1.8 wideband speech support is designed to improve call clarity. USB Mirroring is also available for selected compatible smartphones using the MirrorAPP+ application.\u003c\/p\u003e\u003cp\u003eFor audio performance, the KW-M590BT includes a built-in four-channel amplifier rated at 50 watts maximum per channel and 22 watts RMS per channel at less than 1% THD. A 13-band graphic equalizer, two-way crossover, subwoofer level control, and digital time alignment give installers useful tools for tailoring the system to the vehicle. Front, rear, and mono subwoofer preouts support a later amplifier, speaker, or subwoofer upgrade.\u003c\/p\u003e\u003cp\u003eThe 6.8-inch WSVGA LCD uses a 1024 x 600 resolution and capacitive touch operation for clear menus and responsive control. Gesture Touch Control supports selected source functions, and the screen is paired with dedicated touch-sensitive controls along the side. USB playback supports a wide range of audio and video file formats, including high-resolution WAV and FLAC files.\u003c\/p\u003e\u003cp\u003eInstallation flexibility is a central part of the design. The receiver has a double-DIN display with a shallow, L-shaped rear chassis, and it can be configured for a 1-DIN installation by removing the supplied side and rear brackets. A rear-view camera input, steering-wheel-control readiness with a compatible third-party adapter, and optional RM-RK259 remote compatibility help it integrate into a broad range of vehicle upgrades.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Smartphone Integration:\u003c\/strong\u003e Apple CarPlay and Android Auto connect through USB.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.8-Inch WSVGA Display:\u003c\/strong\u003e 1024 x 600 capacitive touchscreen provides detailed on-screen control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth 5.0:\u003c\/strong\u003e Stream music and handle compatible hands-free calls wirelessly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13-Band Sound Tuning:\u003c\/strong\u003e EQ, crossover, time alignment, and subwoofer control refine system response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Expansion:\u003c\/strong\u003e Front, rear, and mono subwoofer preouts support external amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Camera Input:\u003c\/strong\u003e Connect a compatible composite rear-view camera for reversing assistance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KW-M590BT uses a fixed 6.8-inch capacitive touchscreen and a compact short-chassis layout rather than a conventional full-depth receiver body. Its WSVGA LCD has LED backlighting, a transparent TN panel, TFT active-matrix drive, and an RGB-striped pixel arrangement. The chassis is sized for a 178 x 100 mm double-DIN opening while preserving space behind the dash for wiring and vehicle-specific integration hardware.\u003c\/p\u003e\u003cp\u003eProfessional installation is recommended for safe mounting and wiring. The unit is supplied with a 1.0 m USB lead and supports 1-DIN installation after the designated brackets are removed; vehicle-specific dash kits, wiring harness adapters, antenna adapters, steering-wheel-control adapters, and cameras may be needed depending on the vehicle. Use a quality USB cable for wired CarPlay or Android Auto, and confirm vehicle fitment before purchase.\u003c\/p\u003e","brand":"JVC","offers":[{"title":"Default Title","offer_id":47970420326563,"sku":"KW-M590BT","price":215.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71y4KG2v8JL_b49c27c3-cad3-4a97-a2aa-141c8327c7ea.jpg?v=1786153621"},{"product_id":"kenwood-dmx4710s","title":"KENWOOD DMX4710S 6.8\" Double DIN Digital Media Receiver","description":"\u003cp\u003eThe KENWOOD DMX4710S is a 6.8-inch digital multimedia receiver designed to modernize a vehicle with touchscreen control, smartphone integration, Bluetooth calling, and audio streaming. It is a practical upgrade for drivers who want access to navigation, music, calls, and messages through a centralized in-dash interface. Apple CarPlay and Android Auto connect through USB for familiar phone-based control while driving.\u003c\/p\u003e\u003cp\u003eIts built-in amplifier delivers up to 50 watts by four channels maximum, with 22 watts by four channels of full-bandwidth power at less than 1% THD. A 13-band graphic equalizer, high-pass filter, low-pass filter, and digital time alignment provide useful tuning tools for factory-replacement speakers or a more developed aftermarket system. Front\/rear preouts and a dedicated subwoofer output support expansion with external amplification.\u003c\/p\u003e\u003cp\u003eThe 6.8-inch WSVGA display uses a capacitive touch panel and 1024 x 600 resolution for responsive control and detailed on-screen information. LED backlighting, a TN LCD panel, and RGB stripe pixel arrangement support clear menu, media, and smartphone-interface viewing. The unit also plays compatible audio and video files from USB storage.\u003c\/p\u003e\u003cp\u003eBluetooth 5.0 provides hands-free calling and wireless music streaming, with support for common phonebook, audio streaming, and remote-control profiles. The USB Type-A connection supports USB 2.0 High Speed devices, several common file systems, and up to 2.1A charging for compatible smartphones. USB mirroring through MirrorAPP+ is available with selected compatible smartphones.\u003c\/p\u003e\u003cp\u003eThe DMX4710S is suited to vehicles needing a shallow multimedia receiver chassis while retaining a large touchscreen interface. It is iDatalink Maestro RR\/RR2 ready for supported vehicle-integration upgrades, including compatibility with retained factory features on applicable vehicles. An optional rear-view camera can add adjustable parking guidelines, while an optional SiriusXM tuner can add satellite-radio capability.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired CarPlay And Android Auto:\u003c\/strong\u003e Connect a compatible smartphone by USB for familiar voice and touchscreen access.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.8-Inch WSVGA Touchscreen:\u003c\/strong\u003e Capacitive 1024 x 600 display provides detailed, responsive on-screen control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13-Band EQ And Time Alignment:\u003c\/strong\u003e Tailor tonal balance and listening position for the vehicle cabin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth 5.0:\u003c\/strong\u003e Supports hands-free calls, music streaming, phonebook access, and playback control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Expansion Outputs:\u003c\/strong\u003e Two 2.5V preouts plus a subwoofer output support external amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaestro And Camera Ready:\u003c\/strong\u003e Supports compatible iDatalink integration and an optional rear-view camera.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DMX4710S combines a clear glass capacitive touch panel with an LED-backlit TN LCD display and a short-depth chassis. Its 6.8-inch wide screen uses a 1024 x 600 RGB-striped display with 99.99% effective pixels. The reduced chassis depth is intended to simplify placement in vehicles with limited space behind the dash.\u003c\/p\u003e\u003cp\u003eConfirm vehicle-specific dash opening, wiring, steering-wheel-control retention requirements, and camera connections before installation. The main unit installation size without sleeve is 178 x 100 x 86 mm, and it operates from a 12V DC vehicle electrical system. Use the USB connection for Apple CarPlay and Android Auto; iDatalink Maestro RR\/RR2 hardware, a rear-view camera, SiriusXM tuner, and KCA-RCDV340 remote are optional accessories sold separately.\u003c\/p\u003e","brand":"KENWOOD","offers":[{"title":"Default Title","offer_id":47970421178531,"sku":"DMX4710S","price":256.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/818w5jpR4jL_bbb4675a-9523-4fa8-be76-469399850076.jpg?v=1786153668"},{"product_id":"kenwood-dmx5710s","title":"Kenwood DMX5710S Double DIN 6.8\" Digital Media Receiver","description":"\u003cp\u003eThe Kenwood DMX5710S is a Double DIN digital multimedia receiver designed to replace a factory radio with a modern 6.8-inch touchscreen interface. It brings smartphone navigation, calling, music, USB media playback, AM\/FM radio, and Bluetooth into one dashboard component. It is a practical fit for drivers who want current phone integration without adding a separate display.\u003c\/p\u003e\u003cp\u003eWireless and wired Apple CarPlay and Android Auto provide access to compatible phone apps through the receiver screen. The capacitive touch panel supports swipe-based control, while the WSVGA display uses a 1024 x 600 resolution for clear on-screen menus and compatible media. Built-in Bluetooth adds hands-free calling and wireless audio streaming.\u003c\/p\u003e\u003cp\u003eFor sound tuning, the DMX5710S includes a 13-band graphic equalizer, digital time alignment, high-pass and low-pass filtering, and a dedicated subwoofer output. Its built-in amplifier is rated at 22 watts x 4 full-bandwidth power at less than 1% THD, with 50 watts x 4 maximum power. These controls make it suitable for retaining factory speakers or serving as the source unit in a system with external amplification.\u003c\/p\u003e\u003cp\u003eThe receiver supports wireless smartphone mirroring through the MirrorAPP+ app on selected compatible phones. It is also iDatalink Maestro Ready, allowing compatible vehicles to retain selected factory functions when used with a separately sold Maestro RR or RR2 interface. A rear-view camera input with adjustable parking guidelines can support a compatible backup camera.\u003c\/p\u003e\u003cp\u003eA short 85.7 mm chassis depth helps when working in dashboards with limited space behind the radio opening. Two 2.5-volt preouts and a subwoofer output provide expansion options for aftermarket amplifiers. SiriusXM capability is available with a separately sold compatible tuner, while the USB port supports media playback and charging up to 2.1A.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless Smartphone Integration:\u003c\/strong\u003e Uses wired or wireless Apple CarPlay and Android Auto with compatible phones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.8-Inch Capacitive Display:\u003c\/strong\u003e Provides responsive swipe control on a 1024 x 600 WSVGA screen.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13-Band Equalizer:\u003c\/strong\u003e Lets you tailor tonal balance for the vehicle and speaker system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital Time Alignment:\u003c\/strong\u003e Helps adjust sound staging for the listening position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eiDatalink Maestro Ready:\u003c\/strong\u003e Supports compatible Maestro RR or RR2 interfaces sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort Chassis:\u003c\/strong\u003e Reduces mounting depth for easier fitment in many dashboards.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DMX5710S combines a clear-glass capacitive touch panel with a TN LCD, TFT active-matrix drive system, RGB-striped pixel arrangement, and LED backlighting. Its 6.8-inch wide display has 1,843,200 total pixels and a 99.99% effective-pixel specification. The compact main chassis measures 178 x 100 x 85.7 mm and weighs 1.05 kg including the trim plate.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a Double DIN receiver and plan for the appropriate vehicle-specific dash kit, wiring interface, antenna adapter, and steering-wheel-control interface where applicable. The receiver operates from a 12V DC vehicle electrical system and supports 4- to 8-ohm speakers. Add a compatible rear camera, SiriusXM tuner, Maestro interface, or optional KCA-RCDV340 remote only if those functions are needed.\u003c\/p\u003e","brand":"KENWOOD","offers":[{"title":"Default Title","offer_id":47970421211299,"sku":"DMX5710S","price":328.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71QQbxuRJHL.jpg?v=1786153670"},{"product_id":"kenwood-dpx505bt","title":"Kenwood DPX505BT Double DIN CD Receiver with Bluetooth","description":"\u003cp\u003eThe Kenwood DPX505BT is a double-DIN in-dash CD receiver for drivers who want modern phone connectivity while retaining a conventional physical-control radio and disc player. It combines AM\/FM reception, Bluetooth calling and music streaming, front USB and AUX inputs, and a single-disc CD mechanism in one chassis. This makes it a practical replacement for an older factory radio without requiring a touchscreen interface.\u003c\/p\u003e\u003cp\u003eIt is suited to vehicles with a double-DIN radio opening and owners who use a mix of broadcast radio, CDs, USB music, and smartphone audio. Bluetooth supports hands-free calling as well as wireless playback, while the receiver can pair with multiple devices and switch between two connected phones. A front-panel Bluetooth access button helps keep common phone functions within reach.\u003c\/p\u003e\u003cp\u003eThe built-in amplifier is rated at 22 watts RMS per channel across four channels at less than 1% THD, with 50 watts maximum output per channel. A 13-band equalizer, digital time alignment, speaker-size settings, and adjustable crossover controls provide useful tuning tools for factory-speaker upgrades or more detailed aftermarket systems. Drive EQ is also available to compensate for road and tire noise.\u003c\/p\u003e\u003cp\u003eFor voice-enabled use, the DPX505BT works with the Amazon Alexa mobile app through a compatible Bluetooth-connected phone. Alexa can be activated with the receiver control or the wake word when connected and configured. The receiver also works with the KENWOOD Remote application for basic smartphone-based control.\u003c\/p\u003e\u003cp\u003eThe receiver provides three 2.5-volt RCA preouts for front, rear, and subwoofer channels, allowing it to serve as the control center for an expanded amplifier and powered-subwoofer system. Its front USB port supports compatible iPhone, iPod, flash-drive, and mass-storage connections, while Bluetooth supports iPhone and Android audio playback. SiriusXM capability is available when an optional compatible SiriusXM vehicle tuner is added.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth 4.2:\u003c\/strong\u003e Supports hands-free calling, phonebook access, and wireless audio streaming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmazon Alexa Ready:\u003c\/strong\u003e Enables Alexa voice functions through a configured smartphone connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13-Band EQ and DTA:\u003c\/strong\u003e Provides detailed sound tuning and speaker time-alignment adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCD and USB Playback:\u003c\/strong\u003e Plays audio CDs and supported digital music files.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree 2.5V Preouts:\u003c\/strong\u003e Connects front, rear, and subwoofer amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Zone Color Illumination:\u003c\/strong\u003e Lets the display and key zones match dashboard lighting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DPX505BT uses a conventional double-DIN chassis and a physical-control faceplate with a 420-segment, 3-line text display. Kenwood does not publish faceplate material details, but the layout includes dedicated source, Bluetooth, and Alexa controls along with variable illumination for the LCD display and two key zones. Display text can be set to English, Spanish, or French.\u003c\/p\u003e\u003cp\u003eInstallation requires a double-DIN-compatible dashboard opening, vehicle-specific mounting hardware as needed, and proper power, speaker, ground, and antenna connections. The included wiring harness and supplied mounting screws support installation, while a vehicle-specific aftermarket harness is recommended to avoid cutting factory wiring. Use the front USB and AUX inputs for accessible portable-device connections, and use the RCA preouts when adding external amplification or a subwoofer.\u003c\/p\u003e","brand":"KENWOOD","offers":[{"title":"Default Title","offer_id":47970421407907,"sku":"DPX505BT","price":147.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71jqTUJaArL_ccf698b8-eaea-4453-b174-cb29fdeaf3f4.jpg?v=1786153684"},{"product_id":"kenwood-kac-m1814","title":"Kenwood KAC-M1814 Compact 4-Channel Marine Digital Amplifier","description":"\u003cp\u003eThe Kenwood KAC-M1814 is a compact four-channel Class D amplifier designed to add clean, controlled power to car, marine, and motorsports audio systems. It is a practical solution for systems that need more output than a receiver's built-in amplifier can provide while conserving installation space. Its small footprint makes it suitable for locations where a conventional full-size amplifier may be difficult to mount.\u003c\/p\u003e\u003cp\u003eWith 45 watts RMS per channel, the KAC-M1814 can power four compatible speakers or be configured in bridged two-channel operation. It supports 2-ohm stereo loads and 4- to 8-ohm bridged loads, allowing it to work with a range of speaker layouts. Variable high-pass and low-pass filters help tailor the signal for full-range speakers or selected system configurations.\u003c\/p\u003e\u003cp\u003eThis amplifier is intended for listeners building a compact upgrade in a vehicle, boat, or powersports application. Speaker-level input with signal-sensing turn-on supports integration with receivers that do not provide dedicated RCA preamp outputs. RCA inputs are also available for use with aftermarket receivers and other line-level sources.\u003c\/p\u003e\u003cp\u003eKenwood uses a Class D digital amplifier platform with a Power MOS-FET switching power supply to keep the chassis compact. Separate preamp and power-amp sections are designed to help reduce radiation noise. Independent A and B channel gain controls and separately adjustable crossover sections provide useful setup flexibility.\u003c\/p\u003e\u003cp\u003eFor outdoor-oriented installations, the KAC-M1814 includes conformal coating to help protect the circuit board from rust and vibration-related exposure. Its covered connectors are designed to help keep out water and dust. The amplifier fits neatly into a system using four speakers, or it can be used bridged for two compatible channels where higher per-channel output is needed.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Channel Class D Amplification:\u003c\/strong\u003e Adds 45 watts RMS to each of four channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridgeable Output:\u003c\/strong\u003e Supports two-channel bridged operation at compatible 4-ohm loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker-Level Input:\u003c\/strong\u003e Connects to systems without RCA preamp outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-Sensing Turn-On:\u003c\/strong\u003e Powers on when an input signal is detected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Crossovers:\u003c\/strong\u003e Adjustable high-pass and low-pass filtering from 50 to 200 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConformal-Coated Circuit Board:\u003c\/strong\u003e Helps protect the electronics in marine and motorsports use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KAC-M1814 uses a compact aluminum heat-sink chassis with a 145 x 45 x 99 mm enclosure size. Its Class D design, covered connector arrangement, and conformal-coated circuit board suit installations where space and environmental exposure are considerations. The amplifier also uses a Power MOS-FET switching power supply and separate preamp and power-amp sections.\u003c\/p\u003e\u003cp\u003eMount the amplifier in a secure location with appropriate ventilation and connect it to a 12-volt DC vehicle electrical system. It can accept RCA line-level inputs or speaker-level inputs, while its included DC cable and RCA cables support basic installation connections. Set the A and B channel gain and crossover controls to match the connected speakers and chosen system layout.\u003c\/p\u003e","brand":"KENWOOD","offers":[{"title":"Default Title","offer_id":47970421670051,"sku":"KAC-M1814","price":113.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71FANe4bUgL.jpg?v=1786153700"}],"url":"https:\/\/nsiexport.com\/collections\/top-sellers.oembed","provider":"NSI Export","version":"1.0","type":"link"}