{"title":"Marine Speaker","description":"","products":[{"product_id":"cerwin-vega-cer-st69cx","title":"Cerwin Vega ST69CX 6x9\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin Vega ST69CX is a pair of 6x9-inch, 2-way coaxial speakers built for high-output vehicle, marine, and motorsport audio applications. It combines a full-range woofer and centrally mounted titanium dome tweeter in each speaker, simplifying upgrades where space is limited. The 4-ohm design suits systems designed for standard aftermarket speaker loads.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for listeners who want stronger low-frequency presence and clear upper-frequency detail from a 6x9-inch location. Their 45 Hz to 23 kHz frequency response supports bass, midrange, and treble reproduction from a single coaxial assembly. With 125 watts RMS handling per speaker, they are appropriate for amplifier-powered systems that are correctly matched for power and impedance.\u003c\/p\u003e\u003cp\u003eA UV-treated, thermal-molded waterproof Kevlar fiber cone and rubber surround support use in exposed environments. The speaker system is described as IPX65 marine-grade compliant and salt-resistant, making it suitable for installations where moisture, sun, and changing weather are considerations. These materials also provide a durable foundation for daily on-road and off-road use.\u003c\/p\u003e\u003cp\u003eEach ST69CX uses a 1-inch titanium dome tweeter to reproduce high frequencies, while the woofer uses a 1.4-inch high-temperature voice coil for power handling. A 12 dB Bessel crossover network divides the signal between the woofer and tweeter. The high-energy ferrite motor system, milled aluminum top plate, and vented T-yoke back plate are designed to support heat management during higher-output listening.\u003c\/p\u003e\u003cp\u003eThe ST69CX works well as a replacement or upgrade for compatible 6x9-inch speaker locations with sufficient mounting clearance. It can be used with a compatible factory radio, though an external amplifier matched to its 125-watt RMS-per-speaker rating can provide greater output capability. Verify the 8.875 x 6.125-inch cutout requirement and 3.875-inch mounting depth before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter performance in each speaker location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e125W RMS Per Speaker:\u003c\/strong\u003e Supports amplifier-powered systems with properly matched output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Titanium Dome Tweeter:\u003c\/strong\u003e Reproduces detailed high-frequency information.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKevlar Fiber Cone:\u003c\/strong\u003e Uses a UV-treated, waterproof cone construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Grade Construction:\u003c\/strong\u003e IPX65-compliant design supports exposed-use installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 dB Bessel Crossover:\u003c\/strong\u003e Directs appropriate frequencies to each driver.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ST69CX uses a high-temperature cast aluminum basket, rubber surround, ferrite motor system, milled aluminum top plate, and T-yoke back plate. Its woofer cone is made from UV-treated thermal-molded waterproof Kevlar fiber, while the integrated tweeter uses a titanium dome. Removable black trim rings or grilles are included.\u003c\/p\u003e\u003cp\u003eUse the speakers only where the mounting opening measures approximately 8.875 x 6.125 inches and where at least 3.875 inches of mounting depth is available. The package includes a pair of speakers plus stainless mounting screws and machine bolts with nuts and washers. Match the amplifier or head-unit speaker output to the speakers' 4-ohm nominal impedance, and avoid exceeding their rated power handling.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970394243235,"sku":"CER-ST69CX","price":205.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61PR523ck1L.jpg?v=1786152485"},{"product_id":"cerwin-vega-cer-sm10f4","title":"Cerwin-Vega SM10F4 10\" 2-Way Marine Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega SM10F4 is a 10-inch 2-way coaxial marine speaker system designed for boat, powersports, and outdoor audio installations. It combines a large woofer with a centrally mounted titanium dome tweeter, helping cover bass and high-frequency detail from one flush-mount location. The 4-ohm design is suited to compatible marine amplifiers and audio systems.\u003c\/p\u003e\u003cp\u003eBuilt for installations exposed to sun, spray, and outdoor conditions, the SM10F4 uses weather-focused materials and an IPX5 water-resistance rating. Its UV-stable construction and water- and saltwater-resistant design support use in marine and recreational environments. This makes it a practical choice for speaker locations where conventional car speakers may not be appropriate.\u003c\/p\u003e\u003cp\u003eThe 10-inch coaxial format is intended to deliver substantial midbass presence along with clear upper-frequency output from the 1-inch titanium dome tweeter. Cerwin-Vega rates each speaker for 200 watts RMS and 400 watts maximum power handling. With 95 dB sensitivity, the system is designed for strong output when matched with suitable amplification.\u003c\/p\u003e\u003cp\u003eThe SM10F4 incorporates a ferrite motor structure, maximum Xmax suspension design, and an internal crossover. These elements support controlled driver movement while directing the appropriate frequency range to the woofer and tweeter. The flush-mount layout provides a clean, integrated appearance on a panel, bulkhead, or other properly supported mounting surface.\u003c\/p\u003e\u003cp\u003eIntegrated multi-color RGB LED lighting adds visual customization to a marine or powersports system. The speakers are supplied with grilles and are commonly specified as a pair, while power ratings are stated per speaker. They can serve as a high-output main-speaker upgrade in a system with a compatible source unit, amplifier, wiring, and optional RGB lighting control.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch 2-Way Coaxial Design:\u003c\/strong\u003e Combines bass-capable woofer output and tweeter detail in one speaker location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Titanium Dome Tweeter:\u003c\/strong\u003e Provides dedicated high-frequency reproduction for clearer vocals and instruments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200W RMS Per Speaker:\u003c\/strong\u003e Supports use with appropriately matched marine amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPX5 Water Resistance:\u003c\/strong\u003e Helps suit the speakers to wet outdoor and marine environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal Crossover:\u003c\/strong\u003e Routes frequencies between the woofer and tweeter within each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated RGB Lighting:\u003c\/strong\u003e Adds multi-color illumination to complement a customized installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe SM10F4 uses a cast aluminum basket, ferrite ceramic magnet, treated-cloth surround, polypropylene cone, and titanium diaphragm. Its construction is specified as UV stable and water- and saltwater-resistant for outdoor use. A removable grille is included to finish and help protect the flush-mounted speaker installation.\u003c\/p\u003e\u003cp\u003eConfirm the available mounting surface can accommodate the 8.78-inch cutout and 4.33-inch top-mount depth before cutting. Use marine-appropriate wiring and connectors, maintain correct speaker polarity, and match each 4-ohm speaker to an amplifier channel rated appropriately for its 200-watt RMS handling. For RGB control beyond fixed wiring options, use a compatible RGB lighting controller sold separately.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970396864675,"sku":"CER-SM10F4","price":270.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/618vGMB10DL.jpg?v=1786152605"},{"product_id":"cerwin-vega-cer-sm65","title":"Cerwin-Vega SM65F4 6.5\" 2-Way Marine Speakers","description":"\u003cp\u003eThe Cerwin-Vega SM65F4 is a pair of 6.5-inch 2-way marine coaxial speakers designed for boats, motorcycles, and powersports applications. They provide a flush-mount audio upgrade where conventional interior speakers may not withstand moisture, sunlight, or outdoor exposure. The 4-ohm design suits systems using compatible marine or powersports amplifiers and source units.\u003c\/p\u003e\u003cp\u003eEach speaker combines a full-range woofer with a 25mm (1-inch) titanium dome tweeter. This 2-way arrangement is designed to cover midrange detail and high-frequency reproduction from a single mounting location. The Radial Zip Ring cone design is intended to support expanded high-frequency reproduction.\u003c\/p\u003e\u003cp\u003eThe SM65F4 is rated for 125 watts RMS and 250 watts peak power handling per speaker. Its 92 dB sensitivity rating at 1W\/1m helps it produce useful output with appropriately matched amplification. A 4mm Xmax specification and Max Xmax suspension design support controlled cone travel.\u003c\/p\u003e\u003cp\u003eFor outdoor use, the speaker uses a thermal-molded, UV-coated waterproof composite injection cone and a high-temperature injection-molded composite basket. Cerwin-Vega identifies the model as IP65 marine-grade compliant and 100% UV stable. These construction details are intended for installations exposed to water spray, dust, and sunlight.\u003c\/p\u003e\u003cp\u003eIntegrated digital RGB LED lighting adds illumination around the speaker for compatible marine and powersports builds. The speaker is a flush-mount model with a 5.63-inch mounting diameter and 2.56-inch mounting depth. It can be used as part of a full system with a compatible 4-ohm amplifier, source unit, wiring, and optional RGB lighting control equipment.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch 2-Way Design:\u003c\/strong\u003e Combines a woofer and titanium dome tweeter in one flush-mount speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25mm Titanium Dome Tweeter:\u003c\/strong\u003e Handles high-frequency detail in the coaxial speaker system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e125W RMS Power Handling:\u003c\/strong\u003e Supports amplifier matching for higher-output marine and powersports systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP65 Marine-Grade Compliance:\u003c\/strong\u003e Built for exposure to dust, water spray, and outdoor conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Coated Composite Cone:\u003c\/strong\u003e Helps the cone withstand prolonged outdoor and marine use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Digital RGB Lighting:\u003c\/strong\u003e Adds configurable lighting capability to compatible installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe SM65F4 uses a ferrite magnetic motor, treated-cloth surround, high-temperature injection-molded composite basket, and thermal-molded UV-coated waterproof composite injection cone. Its titanium diaphragm material and 1.75-inch voice coil are paired with an internal 2-way speaker design. A grille is listed as optional.\u003c\/p\u003e\u003cp\u003eConfirm the available cutout and rear clearance before installation: the specified mounting diameter is 5.63 inches and mounting depth is 2.56 inches. Use compatible 4-ohm amplification and follow the vehicle, boat, or fairing manufacturer's mounting guidance. RGB lighting requires appropriate compatible control and wiring; Cerwin-Vega lists its RPMDLED multi-function digital RGB LED remote control as available.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970396897443,"sku":"CER-SM65","price":144.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61zJ-xvqkNL.jpg?v=1786152607"},{"product_id":"cerwin-vega-cer-sm69f4","title":"Cerwin-Vega SM69F4 6x9\" Marine 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega SM69F4 is a pair of 6 x 9-inch, 2-way coaxial speakers made for marine, motorcycle, and powersports audio installations. It provides a flush-mount speaker option for systems exposed to sun, moisture, wind, and open-air riding noise. The 4-ohm design is suited to compatible aftermarket amplifiers and speaker outputs.\u003c\/p\u003e\u003cp\u003eEach system combines a 6 x 9-inch woofer section with a 25 mm titanium dome tweeter. This configuration is designed to cover midrange and high-frequency information from one mounting location. Its specified frequency response is 60 Hz to 18 kHz.\u003c\/p\u003e\u003cp\u003eThe SM69F4 is rated for 150 watts RMS and 300 watts peak power handling. A 93 dB sensitivity rating at 1W\/1m supports useful output from an appropriately matched amplifier. The extended-excursion design lists 4 mm of Xmax.\u003c\/p\u003e\u003cp\u003eFor outdoor durability, Cerwin-Vega specifies an IP65 marine-grade-compliant design with 100% UV-stable materials. The speaker uses a thermal-molded, UV-coated waterproof composite injection cone and a high-temperature injection-molded composite basket. These construction details are intended for marine and powersports environments rather than conventional protected cabin installations.\u003c\/p\u003e\u003cp\u003eIntegrated digital RGB LED lighting lets the speakers become part of a coordinated illuminated audio system. Cerwin-Vega identifies the optional RPMDLED multi-function digital RGB LED lighting remote control for lighting control. With its 8.64 x 6.0-inch cutout requirement and 3.15-inch mounting depth, the SM69F4 is suited to custom panels, boat surfaces, fairings, and compatible lid installations with sufficient clearance.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 x 9-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter sections in one flush-mount speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25 mm Titanium Dome Tweeter:\u003c\/strong\u003e Handles high-frequency reproduction in the 2-way system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150W RMS Power Handling:\u003c\/strong\u003e Supports amplification matched to the speaker's continuous rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP65 Marine-Grade Compliance:\u003c\/strong\u003e Supports use in marine and exposed powersports installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterproof Composite Cone:\u003c\/strong\u003e Uses UV-coated composite construction for outdoor durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Digital RGB LEDs:\u003c\/strong\u003e Adds selectable lighting capability with the available RPMDLED controller.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe SM69F4 uses a thermal-molded, UV-coated waterproof composite injection cone, a titanium dome tweeter, and a high-temperature injection-molded composite basket. Its Radial Zip Ring cone design is specified for expanded high-frequency reproduction, while the Max Xmax suspension design is intended for marine and motorcycle-fairing applications. The speakers are supplied as a pair and use a 4-ohm nominal impedance.\u003c\/p\u003e\u003cp\u003eConfirm a mounting opening of 8.64 x 6.0 inches and allow at least 3.15 inches of mounting depth before installation. Use a stable mounting surface and wire each speaker to an amplifier or source compatible with a 4-ohm load and the stated power rating. Plan RGB lighting wiring separately if lighting control is desired; Cerwin-Vega lists the RPMDLED controller as available, and grilles are listed as an option.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970396930211,"sku":"CER-SM69F4","price":2258.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61Y9qKTC--L.jpg?v=1786152609"},{"product_id":"cerwin-vega-cer-sm8f4","title":"Cerwin-Vega SM8F4 8\" 2-Way Coaxial Marine Speakers","description":"\u003cp\u003eThe Cerwin-Vega SM8F4 is an 8-inch, 2-way coaxial speaker pair designed for marine, motorcycle, and powersports audio installations. Its flush-mount format helps provide a clean installation where larger, weather-conscious speakers are needed. Each speaker combines an 8-inch woofer with a 1-inch titanium dome tweeter for broad-frequency playback from a single mounting location.\u003c\/p\u003e\u003cp\u003eRated at 150 watts RMS and 300 watts maximum per speaker, the SM8F4 is intended for systems using an external amplifier or a capable marine\/powersports source unit. The 4-ohm nominal impedance supports common mobile-audio amplifier configurations. With 93 dB sensitivity, these speakers are suited to installations that need useful output from moderate amplifier power.\u003c\/p\u003e\u003cp\u003eThe speaker uses a waterproof composite paper cone with a treated-cloth surround to support use around water, sun, and changing outdoor conditions. Its high-temperature injection-molded composite basket provides a durable mounting structure. Water-spray and salt-water resistance, along with UV-stable materials, make it appropriate for exposed installations when mounted correctly.\u003c\/p\u003e\u003cp\u003eA 1-inch titanium dome tweeter is integrated into the coaxial design to reproduce upper-frequency detail without requiring a separate tweeter location. The stated 55 Hz to 18 kHz frequency response gives the system coverage through bass, midrange, and treble, although a dedicated subwoofer can extend deep-bass capability. A ferrite magnet motor structure and Max X-max suspension support the woofer's controlled excursion.\u003c\/p\u003e\u003cp\u003eIntegrated RGB LED lighting allows the SM8F4 to add visual accent lighting to compatible installations. Lighting control requires the separately sold Cerwin-Vega RPMDLED controller. For a complete marine or powersports system, pair the speakers with an appropriately rated 4-ohm amplifier, suitable marine-grade wiring, and optional grilles where added driver protection is desired.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter performance in one flush-mount speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150W RMS Per Speaker:\u003c\/strong\u003e Supports amplified systems with meaningful continuous power handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Titanium Dome Tweeter:\u003c\/strong\u003e Adds clear high-frequency detail from the integrated coaxial assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterproof Composite Paper Cone:\u003c\/strong\u003e Helps support use in marine and exposed powersports environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB LED Lighting:\u003c\/strong\u003e Provides integrated accent lighting with a separately sold controller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Nominal Impedance:\u003c\/strong\u003e Works with many common mobile and marine amplifiers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe SM8F4 uses a molded, UV-coated waterproof composite paper cone, treated-cloth surround, ferrite magnet motor structure, and high-temperature injection-molded composite basket. Its materials are specified as water-spray and salt-water resistant and 100% UV stable. The flush-mount layout keeps the speaker profile integrated with the mounting surface.\u003c\/p\u003e\u003cp\u003eVerify that the installation location provides at least 3.15 inches of mounting depth and a 7.13-inch cutout before purchase. Use an amplifier stable at 4 ohms and match power sensibly to the 150-watt RMS rating per speaker. RGB lighting is integrated, but the compatible RPMDLED LED controller is sold separately; optional grilles are also available separately.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970397028515,"sku":"CER-SM8F4","price":225.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61EcFfTZA_L.jpg?v=1786152611"},{"product_id":"gravity-grs36led","title":"Gravity GRS36LED 36-Inch RGB Bluetooth Soundbar","description":"\u003cp\u003eThe Gravity GRS36LED is a 36-inch amplified soundbar designed to bring full-range music playback to UTVs, ATVs, trucks, cars, boats, and other 12-volt applications. It combines multiple speakers, Bluetooth streaming, wired inputs, and integrated RGB lighting in one enclosure. This makes it a practical option for adding audio where a conventional component-speaker installation may be less convenient.\u003c\/p\u003e\u003cp\u003eIts speaker array includes six 4-inch full-range drivers and two 1-inch soft-dome tweeters. That combination is intended to cover bass, midrange, and high-frequency detail across a stated 45 Hz to 22 kHz frequency response. A built-in amplifier powers the system, eliminating the need to source a separate amplifier for basic operation.\u003c\/p\u003e\u003cp\u003eThe GRS36LED supports Bluetooth 5.0 wireless streaming with a stated range of up to 33 feet. USB playback and line-level input add wired source options for compatible devices. An RCA output is also provided for connection within a larger audio setup.\u003c\/p\u003e\u003cp\u003eIntegrated RGB LED lighting gives the soundbar a visual accent in addition to its audio role. Multiple color modes, adjustable brightness, and adjustable lighting speed let the appearance be tailored to the vehicle or installation. The included RF remote is specified to work from up to 25 feet and can be used for audio and lighting adjustments.\u003c\/p\u003e\u003cp\u003eDesigned for 12-volt electrical systems, the GRS36LED operates across a stated 10 to 16 volt range. It can serve as a standalone audio solution or as a source component within a broader vehicle sound system. Its combination of onboard amplification, multi-source connectivity, and supplied mounting hardware supports installations focused on off-road, automotive, and marine-style use.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e36-Inch Soundbar Format:\u003c\/strong\u003e Combines speakers, amplification, connectivity, and lighting in one vehicle-oriented enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix Full-Range Speakers:\u003c\/strong\u003e Six 4-inch drivers provide broad sound coverage from a compact bar-style system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoft-Dome Tweeters:\u003c\/strong\u003e Two 1-inch tweeters support high-frequency detail alongside the full-range drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth 5.0 Streaming:\u003c\/strong\u003e Stream music wirelessly from compatible Bluetooth-enabled devices at up to 33 feet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB LED Lighting:\u003c\/strong\u003e Multiple color modes with adjustable brightness and speed add customizable illumination.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Source Connectivity:\u003c\/strong\u003e USB playback, line-in, and RCA output support flexible system integration.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GRS36LED uses a 36-inch soundbar layout with an integrated amplifier, six full-range speakers, dual tweeters, and built-in RGB LED lighting. The available product information identifies it as having durable construction for outdoor and marine-oriented applications, but does not specify enclosure materials or an ingress-protection rating. Its all-in-one design reduces the number of separate audio components needed for an installation.\u003c\/p\u003e\u003cp\u003eMounting brackets, hardware, power and connection cables, an RF remote, and a user manual are included. Install the soundbar on a suitable vehicle mounting surface, connect it to a compatible 10 to 16 volt power system, and select Bluetooth, USB, or line-in as the desired source. The RCA output can be used when integrating compatible downstream audio equipment.\u003c\/p\u003e","brand":"GRAVITY","offers":[{"title":"Default Title","offer_id":47970401517731,"sku":"GRS36LED","price":339.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/a_92b71e9a-1596-4e01-9818-f5da0729fa04.webp?v=1786152845"},{"product_id":"gravity-gtvl74bt-800-watt-amplified-double-sided-powersports-marine-soundbar-8-speaker-bluetooth-led-backlit-waterproof-dirtproof-roll-bar-mount-for-utv-atv-off-road-vehicles","title":"Gravity GTVL74BT 26\" Amplified Powersports Soundbar","description":"\u003cp\u003eThe Gravity GTVL74BT is an amplified, double-sided powersports marine soundbar designed to add music playback to UTVs, ATVs, golf carts, and other off-road vehicles. It combines eight marine-grade drivers, onboard amplification, Bluetooth streaming, and integrated lighting in one roll-bar-mountable enclosure. This makes it a practical upgrade for riders who want a self-contained audio solution rather than separate speakers and an external amplifier.\u003c\/p\u003e\u003cp\u003eIts eight-speaker layout includes two tweeters, four mid-range drivers, and two woofers. The double-sided design is intended to spread sound around the vehicle, while the woofer complement supports fuller low-frequency output than a small full-range-only bar. With a stated maximum output of 800 watts, it is built for open-air powersports use where road, wind, and engine noise can compete with music.\u003c\/p\u003e\u003cp\u003eThe GTVL74BT supports Bluetooth 5.0 wireless streaming with a stated range of up to 100 feet. An integrated AUX input provides a wired source option when Bluetooth is not preferred. An AUX output is also specified for daisy-chaining compatible wired speakers or subwoofers sold separately.\u003c\/p\u003e\u003cp\u003eFor outdoor use, the enclosure carries an IP66 waterproof and dustproof rating. The marine-grade speaker system and sealed powersports-oriented format are intended for exposure to rain, mud, sand, and dusty trails. A rear-facing LED light bar adds a visibility-oriented lighting element with adjustable brightness for nighttime use.\u003c\/p\u003e\u003cp\u003eSpeaker backlighting provides green, red, white, and blue color selections, along with solid, fading, music-sync, and off modes. The included roll-bar mounting bracket fits cage bars from 1.75 to 2.5 inches in diameter. This allows the GTVL74BT to serve as a complete primary audio bar or as the front end of an expanded wired system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e800-Watt Amplified System:\u003c\/strong\u003e Integrated amplification powers the eight-speaker soundbar without requiring a separate external amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight Marine-Grade Drivers:\u003c\/strong\u003e Two tweeters, four mid-range drivers, and two woofers cover highs, midrange detail, and bass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble-Sided Soundbar Design:\u003c\/strong\u003e Driver placement is designed to provide broad sound coverage around an open vehicle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth 5.0 Streaming:\u003c\/strong\u003e Play music wirelessly from a compatible device from up to 100 feet away.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP66 Weather Protection:\u003c\/strong\u003e Waterproof and dustproof construction is suited to rain, mud, sand, and trail conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Color LED Lighting:\u003c\/strong\u003e Select color and lighting modes, including solid, fading, and music-sync operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GTVL74BT uses a compact, double-sided soundbar format with marine-grade speakers and a weather-resistant enclosure. Its stated IP66 rating addresses water and dust exposure associated with off-road use. The speaker lighting and rear-facing LED light bar are integrated into the enclosure, avoiding the need for separate lighting hardware for these functions.\u003c\/p\u003e\u003cp\u003eUse the included roll-bar mounting bracket on compatible 1.75- to 2.5-inch cage bars, then connect the unit to a 12-volt power source. Pair a Bluetooth-enabled phone or media device for wireless playback, or connect a wired source through the AUX input. For a larger system, the AUX output can be used to daisy-chain compatible wired speakers or a subwoofer sold separately.\u003c\/p\u003e","brand":"GRAVITY","offers":[{"title":"Default Title","offer_id":47970401648803,"sku":"GTVL74BT","price":259.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/pixelcut-export_af895d7c-102f-49ae-be1f-91de40348737.jpg?v=1786152853"},{"product_id":"gravity-2x-mg660-lbh-6-5-inch-2-way-marine-speakers-cea-rated-4-ohms-impedance-frequency-response-80-20-khz-water-resistant-white-total-350-watts-peak-power","title":"Gravity MG660-LBK 6.5\" 2-Way Marine Speakers","description":"\u003cp\u003eThe Gravity MG660-LBK is a pair of 6.5-inch two-way marine speakers designed for audio systems exposed to water, weather, and open-air use. It provides a practical replacement or upgrade option for boats, personal watercraft, and off-road vehicles that use a standard-size speaker location. The pair combines full-range speaker playback with integrated blue LED illumination.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for listeners who want music in marine and outdoor vehicle applications without using conventional interior-only speakers. Their weather-resistant, waterproof-listed construction is made to handle heavy water splashes and outdoor conditions. The 6.5-inch format supports installation in many common OEM-style speaker positions, subject to verifying the actual opening and available mounting clearance.\u003c\/p\u003e\u003cp\u003eThe MG660-LBK uses a two-way speaker layout to cover both lower and higher portions of the audible range from each location. Gravity lists 350 watts of advertised power for the pair, though it does not publish an RMS rating or a power-rating test standard for this model. Match the speakers with a compatible marine or vehicle audio source and avoid relying on an unconfirmed continuous-power figure when selecting an amplifier.\u003c\/p\u003e\u003cp\u003eBuilt-in blue LED lighting adds visual accent lighting around the speaker area for marine and outdoor installations. This makes the speakers suitable for systems where lighting is part of the overall vessel or powersports presentation. The lighting feature should be connected and protected according to the vehicle's electrical system requirements.\u003c\/p\u003e\u003cp\u003eA low-profile design helps the MG660-LBK fit installations where rear-panel space is limited. It can be used as a direct replacement where fitment is confirmed, or as part of a larger system with a marine receiver, external amplifier, and additional speakers. Confirm mounting dimensions, wiring requirements, and speaker impedance before installation because detailed manufacturer installation specifications are not published for this SKU.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Size:\u003c\/strong\u003e Fits many standard marine and vehicle speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Design:\u003c\/strong\u003e Combines full-range playback from each speaker location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterproof Listing:\u003c\/strong\u003e Intended for wet marine and outdoor environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather Resistance:\u003c\/strong\u003e Built to handle water splashes and outdoor exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue LED Lighting:\u003c\/strong\u003e Adds illuminated styling to compatible installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Profile Form:\u003c\/strong\u003e Helps support installations with limited mounting space.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MG660-LBK is a white marine speaker pair with a slim, low-profile exterior intended for exposed recreational-vehicle environments. Its listed waterproof and weather-resistant characteristics are intended for marine, watercraft, and off-road applications. No IP rating, cone material, grille material, or basket material has been published for the exact UPC-listed product.\u003c\/p\u003e\u003cp\u003eBefore mounting, compare the existing opening, screw pattern, and rear clearance with the actual speakers, since detailed cutout and mounting-depth figures are not published. Connect each speaker with correct positive and negative polarity to a compatible audio system, and plan separate protected wiring as needed for the LED lighting. These speakers are best used in boats, marine watercraft, and off-road vehicles where a 6.5-inch OEM-style replacement size is appropriate.\u003c\/p\u003e","brand":"GRAVITY","offers":[{"title":"Default Title","offer_id":47970401976483,"sku":"MG660-LBK","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71VoXaylYdL_c96a7ab8-7a66-4565-b2ad-b1ab22a7b25a.jpg?v=1786152874"},{"product_id":"gravity-2x-mg670-lw-6-5-inch-2-way-total-350-watts-peak-power-marine-speakers-cea-rated-frequency-response-80-to-20-khz-uv-protection-and-water-resistant-black","title":"Gravity MG670-LW 6.5\" 2-Way Marine Speakers","description":"\u003cp\u003eThe Gravity MG670-LW is a pair of 6.5-inch 2-way marine speakers designed for boat, watercraft, and outdoor vehicle audio installations. They provide a compact replacement option where conventional vehicle speakers may be exposed to splashes, sun, and changing weather. The black low-profile format is intended for installations that need a standard-size marine speaker.\u003c\/p\u003e\u003cp\u003eThese speakers are suited to users upgrading sound on boats, personal watercraft, and off-road vehicles. Their 4-ohm impedance is compatible with common mobile-audio speaker systems. The pair is listed with a 350-watt maximum power rating, while an RMS rating is not specified in the available product information.\u003c\/p\u003e\u003cp\u003eThe MG670-LW uses a 2-way design to cover a broader range than a single-driver speaker. Available specifications list an 80 Hz to 20 kHz frequency response and 88 dB sensitivity. This gives the speakers a practical full-range role in a marine or outdoor stereo system.\u003c\/p\u003e\u003cp\u003eFor environmental durability, the speakers are described as waterproof and weather resistant, with UV protection also specified for the MG670-LW. Built-in blue LED illumination adds a visible accent around the speaker installation. No IP rating or LED wiring specification is published.\u003c\/p\u003e\u003cp\u003eThe MG670-LW can be used as a direct-size upgrade in installations designed around 6.5-inch speakers, subject to verifying the mounting opening and clearance. Its 60 mm mounting depth and spade-style terminals support straightforward planning before installation. Pair it with a compatible marine-capable stereo or external amplifier and appropriate wiring for the application.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Pair:\u003c\/strong\u003e Includes two matching marine speakers for a stereo installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Design:\u003c\/strong\u003e Supports full-range sound reproduction from each speaker location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather-Resistant Construction:\u003c\/strong\u003e Intended for exposed boat and outdoor vehicle environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue LED Lighting:\u003c\/strong\u003e Integrated illumination adds a visible accent to the installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Fits common mobile and marine speaker-system configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpade Terminals:\u003c\/strong\u003e Provides a simple connection point for speaker wiring.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MG670-LW combines a black low-profile exterior with a plastic outer construction, UV protection, and water-resistant design. It uses a 10-ounce magnet and an anti-resonant stamped basket. The built-in blue LEDs complement marine, watercraft, and off-road installations without changing the speaker's 6.5-inch form factor.\u003c\/p\u003e\u003cp\u003eConfirm that the mounting location accepts a 6.5-inch speaker and provides at least 60 mm of mounting depth before cutting or fastening. Connect speaker leads to the spade terminals and plan LED wiring according to the vehicle's electrical system; LED wiring details are not published. Use the pair with compatible 4-ohm marine audio equipment, and protect all connections appropriately for the installation environment.\u003c\/p\u003e","brand":"GRAVITY","offers":[{"title":"Default Title","offer_id":47970402009251,"sku":"MG670-LW","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71LBI5WFMYS_92236a22-ef8c-4837-a7b0-09778fd74396.jpg?v=1786152875"},{"product_id":"hertz-hex6-5m-tc","title":"Hertz HEX6-5M-TC 6.5\" Marine Coaxial Speakers","description":"\u003cp\u003eThe Hertz HEX6-5M-TC is a pair of 6.5-inch, 4-ohm two-way coaxial marine speakers with total-black grilles. They are designed for boat audio systems where conventional speakers may be exposed to water spray, sun, salt fog, and changing outdoor conditions. Their coaxial layout combines the woofer and tweeter in each speaker for a compact full-range installation.\u003c\/p\u003e\u003cp\u003eWith 50 watts continuous and 100 watts peak power handling, these speakers are suited to marine head units or appropriately matched external amplifiers. The 88 dB sensitivity and 50 Hz to 23 kHz frequency response support clear midrange, high-frequency detail, and usable bass output from a 6.5-inch speaker. A 4-ohm nominal impedance makes them compatible with many marine audio amplifiers and source units designed for 4-ohm speaker loads.\u003c\/p\u003e\u003cp\u003eThe HEX6-5M-TC uses a high-efficiency tweeter engineered for off-axis sound emission, which is useful in typical boat installations where listeners are not directly in front of the speakers. Its 24 mm PEI tweeter diaphragm is paired with a neodymium magnet for compact high-frequency reproduction. The woofer uses a polypropylene cone with UV inhibitors and a high-density-flux ferrite magnet.\u003c\/p\u003e\u003cp\u003eMarine-specific construction includes an IP65 protection rating, UV-resistance testing to ASTM-D4329, and salt-fog testing to ASTM-B117. Silicone-insulated lead wires, nickel-plated corrosion-resistant terminals, and a sealed built-in crossover are intended to support use in marine environments. The crossover also incorporates a resettable solid-state tweeter protection circuit.\u003c\/p\u003e\u003cp\u003eThese speakers are optimized for infinite-baffle applications, making them appropriate for installation in properly supported boat panels, consoles, or speaker locations without a dedicated enclosure. The tone-on-tone mesh grille uses a twist-and-lock retention system for a finished appearance and speaker protection. Their 60.5 mm mounting depth can help when planning an upgrade in locations with limited behind-panel clearance.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP65 Marine Protection:\u003c\/strong\u003e Helps protect the speakers from water jets in marine installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV And Salt-Fog Tested:\u003c\/strong\u003e Built for exposure to sun and corrosive marine conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in each compact speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOff-Axis Tweeter:\u003c\/strong\u003e Supports high-frequency coverage in typical in-boat mounting positions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Crossover:\u003c\/strong\u003e Includes resettable solid-state tweeter protection for added reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwist-And-Lock Grille:\u003c\/strong\u003e Total-black mesh grille provides protection and secure retention.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe HEX6-5M-TC combines a polypropylene woofer cone with UV inhibitors, a PEI tweeter dome, a ferrite woofer magnet, and a neodymium tweeter magnet. Its total-black, sound-transparent mesh grille is designed to complement dark marine interiors and exterior panels. Corrosion-resistant nickel-plated terminals and silicone-insulated lead wires support the speaker's marine-oriented construction.\u003c\/p\u003e\u003cp\u003eConfirm the available cutout diameter, mounting depth, and front clearance before installation. The speaker requires a 128 mm mounting cutout and 60.5 mm mounting depth, while the overall outside diameter is 172 mm. Use a compatible 4-ohm marine source unit or amplifier, observe correct polarity at the terminals, and install the speakers in a rigid infinite-baffle panel for their intended application.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":47970404925603,"sku":"HEX6-5M-TC","price":116.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71-bRdvorPL.jpg?v=1786153004"},{"product_id":"hertz-hex6-5s-ld-g","title":"Hertz HEX6-5S-LD-G 6.5\" RGB Marine Coaxial Speakers","description":"\u003cp\u003eThe Hertz HEX6-5S-LD-G is a 6.5-inch two-way marine coaxial speaker set designed for boat audio systems that need weather-resistant sound and integrated RGB illumination. Its 4-ohm design works with compatible marine receivers and amplifiers, while the coaxial layout combines the woofer and tweeter in one mounting location. The SPORT-style grille gives the speaker a distinct appearance while protecting the driver assembly.\u003c\/p\u003e\u003cp\u003eThis set is intended for marine installations where conventional car speakers may not provide suitable protection from moisture, UV exposure, and salt fog. Hertz specifies IP65 protection along with ASTM-D4329 UV-resistance and ASTM-B117 salt-fog testing standards. It is suitable for properly protected in-wall or panel-mounted locations, but it is not intended for submersion.\u003c\/p\u003e\u003cp\u003eEach speaker is rated for 50 watts continuous power handling and 100 watts peak power handling. The 50 Hz to 23 kHz frequency response covers bass, midrange, and treble for a full-range coaxial installation. An 88 dB sensitivity rating and 4-ohm impedance support use with appropriately matched marine amplification.\u003c\/p\u003e\u003cp\u003eThe woofer uses a polypropylene cone with UV inhibitors and a 25 mm voice coil designed for infinite-baffle applications. Its PEI dome tweeter uses a neodymium motor and a 13 mm voice coil, while the woofer uses a high-density ferrite magnet. A sealed built-in crossover includes resettable solid-state tweeter protection to help protect the high-frequency driver during overload conditions.\u003c\/p\u003e\u003cp\u003eIntegrated RGB LEDs provide selectable accent lighting through the grille assembly. The lighting circuit uses switched 12 VDC power, with a specified maximum supply of 12.5 VDC and a 100 mA fuse requirement per speaker. The shallow 60.5 mm mounting depth and 155 mm cutout requirement make this set a practical option for compatible marine speaker openings.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine Certification:\u003c\/strong\u003e IP65 protection and tested resistance to UV exposure and salt fog support marine use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Coaxial Design:\u003c\/strong\u003e Combines a 6.5-inch woofer and 0.9-inch tweeter in one speaker location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB LED Lighting:\u003c\/strong\u003e Built-in grille lighting can be wired for multiple color selections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50W Continuous Handling:\u003c\/strong\u003e Matches well with appropriately rated marine receiver or amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Crossover:\u003c\/strong\u003e Built-in crossover includes resettable protection for the tweeter circuit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaintable SPORT Grille:\u003c\/strong\u003e The removable grille can be customized to complement a boat's finish.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe HEX6-5S-LD-G uses a sound-transparent mesh SPORT grille with a twist-and-lock retention system. Its polypropylene woofer cone includes UV inhibitors, while silicone-insulated lead wires and nickel-plated terminals are intended to support long-term marine installation. The grille-mounted RGB lighting is permanently attached to the grille assembly and should not be operated without it.\u003c\/p\u003e\u003cp\u003eVerify the available mounting depth, 155 mm cutout diameter, and 171 mm outside diameter before cutting an installation panel. Connect the speaker channels to a compatible 4-ohm marine receiver or amplifier, and route the LED circuit separately to switched 12 VDC with 100 mA protection per speaker. For RGB lighting, use a suitable control method and keep LED supply voltage at or below 12.5 VDC.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":47970404991139,"sku":"HEX6-5S-LD-G","price":178.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71RwCzrwIVL.jpg?v=1786153006"},{"product_id":"hertz-hms-10-s2-ld-g","title":"Hertz HMS 10 S2-LD-G 10\" 2-Ohm Marine Subwoofer","description":"\u003cp\u003eThe Hertz HMS 10 S2-LD-G is a 10-inch, 2-ohm marine subwoofer made to add dedicated low-frequency output to boat and marine audio systems. Its gray sport grille incorporates RGB LED lighting for a coordinated illuminated installation. The subwoofer is designed for installations where a dedicated enclosure is not practical, helping bring fuller bass response to open-air marine environments.\u003c\/p\u003e\u003cp\u003eThis model is suited to boat owners building or upgrading a marine sound system with a compatible 2-ohm amplifier channel. With 300 watts continuous power handling and 600 watts peak power handling, it is intended for systems that need more low-end capacity than full-range speakers can provide alone. Adding a subwoofer also lets the main speakers focus on midrange and high-frequency reproduction.\u003c\/p\u003e\u003cp\u003eThe HMS 10 S2-LD-G uses a long-throw 50 mm voice coil, high-density-flux ferrite magnet, and high-excursion moving assembly. Its 12.3 mm Xmax and ±16.3 mm mechanical excursion are designed to support controlled cone travel. The polypropylene cone with UV inhibitors and co-molded Santoprene surround are selected for marine exposure and sustained operation.\u003c\/p\u003e\u003cp\u003eMarine-focused construction includes a polymer-injected basket, aramid-fiber spider, silicone-insulated lead wires, and gold-plated corrosion-resistant brass terminals. A silicone cap protects the lead-wire junction point. Hertz rates the model IP65 and identifies UV-resistance testing to ASTM-D4329 and salt-fog operability testing to ASTM-B117.\u003c\/p\u003e\u003cp\u003eThe sound-transparent gray sport grille is removable and can be painted to suit a vessel's finish. Integrated RGB lighting can be used with the optional Hertz HM RGB 1 BK controller. For system design flexibility, Hertz engineers this subwoofer for infinite-baffle use and also publishes compact and performance sealed-box configurations.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Marine Subwoofer:\u003c\/strong\u003e Adds dedicated bass capability to a marine audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Single Voice Coil:\u003c\/strong\u003e Matches amplifiers designed for a 2-ohm subwoofer load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W Continuous Power:\u003c\/strong\u003e Supports amplifier matching for sustained bass playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated RGB LEDs:\u003c\/strong\u003e Adds configurable illumination with the optional HM RGB 1 BK.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP65 Marine Protection:\u003c\/strong\u003e Built for water-jet, UV, and salt-fog exposure requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfinite-Baffle Design:\u003c\/strong\u003e Enables installation without a dedicated subwoofer enclosure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe HMS 10 S2-LD-G combines a UV-inhibited polypropylene cone, co-molded Santoprene surround, aramid-fiber spider, ferrite magnetic assembly, and marine-grade polymer basket. Its gray polymer sport grille is sound-transparent, removable, and paintable. Gold-plated brass terminals and a silicone protective cap address connection-point durability in marine installations.\u003c\/p\u003e\u003cp\u003eVerify the 2-ohm amplifier compatibility, available mounting space, and mounting-hole requirements before installation. Hertz lists a 230 mm (9.06-inch) mounting hole for its sealed-box designs and a 116 mm (4.56-inch) product depth. The subwoofer can be used in an infinite-baffle location or in one of Hertz's published sealed enclosure alignments; RGB lighting requires the separately available HM RGB 1 BK controller.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":47970405122211,"sku":"HMS-10-S2-LD-G","price":323.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61zGHbeXWUL.jpg?v=1786153011"},{"product_id":"hertz-hmx8ld-tw","title":"Hertz HMX 8 LD-TW 8\" RGB LED Marine Coaxial Speakers","description":"\u003cp\u003eThe Hertz HMX 8 LD-TW is a pair of 8-inch, 4-ohm two-way coaxial marine speakers with integrated RGB LED illumination and white grilles. They are designed for boat and powersports audio systems where exposure to water spray, UV light, salt fog, dust, and vibration is part of normal use. Their infinite-baffle design supports installation in suitable open mounting locations without requiring a dedicated speaker enclosure.\u003c\/p\u003e\u003cp\u003eEach speaker handles 100 watts continuous power and 200 watts peak power, providing useful output for amplified marine audio systems. The 45 Hz to 25 kHz frequency response combines substantial midbass capability with extended high-frequency reproduction. With 91 dB sensitivity, the HMX 8 LD-TW can work effectively with an appropriately matched 4-ohm marine amplifier.\u003c\/p\u003e\u003cp\u003eA 1.4-inch PEI dome tweeter with a neodymium magnet is paired with an acoustic lens to support off-axis dispersion. This coaxial arrangement keeps the woofer and tweeter in one mounting location, helping simplify installation in helm areas, cabins, decks, and side panels. A sealed built-in crossover routes frequencies between the drivers and includes resettable solid-state tweeter protection.\u003c\/p\u003e\u003cp\u003eThe woofer uses a UV-inhibitor polypropylene cone, a co-molded Santoprene rubber surround, and an aramid-fiber spider. Its 1-inch voice coil and high-density-flux ferrite magnet are engineered for controlled excursion and marine-duty operation. The basket and grille use high-temperature, UV-resistant polymer materials, while the tweeter is protected by a sound-transparent stainless-steel mesh.\u003c\/p\u003e\u003cp\u003eRGB LEDs are integrated beneath the tweeter and diffuse through a transparent polypropylene cover. The lighting can be wired directly for seven fixed color options or connected to the optional Hertz HM RGB 1 BK LED controller. This makes the HMX 8 LD-TW a practical choice for systems that combine full-range marine sound with coordinated accent lighting.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Two-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in one marine-ready speaker location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W RMS Power Handling:\u003c\/strong\u003e Supports properly matched amplified marine audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated RGB LEDs:\u003c\/strong\u003e Adds selectable lighting beneath the tweeter assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Resistant Polypropylene Woofer:\u003c\/strong\u003e Helps withstand prolonged outdoor and marine exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Dome Tweeter:\u003c\/strong\u003e Delivers detailed high frequencies with broad off-axis dispersion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Built-In Crossover:\u003c\/strong\u003e Protects the tweeter and manages driver frequency distribution.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe HMX 8 LD-TW uses a marine-grade polymer basket and grille, a UV-inhibitor polypropylene cone, a Santoprene surround, and corrosion-resistant gold-plated terminals. Its white tone-on-tone grille complements the speaker while providing protection, and the stainless-steel tweeter mesh supports high-frequency transfer. The speaker is rated IP65 and is engineered for environmental stresses including UV exposure, salt fog, vibration, water spray, thermal shock, and dust.\u003c\/p\u003e\u003cp\u003eVerify a 7.09-inch mounting cutout and 3.58 inches of mounting depth before installation; total rear depth is 4.84 inches. These speakers are developed for infinite-baffle use, so small sealed enclosures may reduce low-frequency performance. For RGB lighting, use a switched 12 VDC source, do not exceed 12.5 VDC, and protect the yellow LED power lead with a 100 mA fuse per speaker; the optional HM RGB 1 BK controller can be used for RGB control.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":47970405154979,"sku":"HMX8LD-TW","price":327.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71QSwAZW0zL.jpg?v=1786153013"},{"product_id":"hertz-hmx6-5-ld-tw","title":"HERTZ HMX6-5-LD-TW 6.5\" RGB Marine Coaxial Speakers","description":"\u003cp\u003eThe HERTZ HMX6-5-LD-TW is a 6.5-inch, 4-ohm marine coaxial speaker set designed for installations where exposure to water spray, UV light, dust, and salt air is a concern. Its white grille and tone-on-tone front mesh suit marine audio systems with a clean all-white appearance. Integrated RGB LED lighting adds illumination without requiring a separate light assembly at the speaker location.\u003c\/p\u003e\u003cp\u003eWith 75 watts continuous and 150 watts peak power handling, these speakers are suited to marine stereo upgrades that need more output capability than basic factory speakers. The 50 Hz to 25 kHz frequency response covers midbass through high frequencies in a single coaxial design. A 89 dB sensitivity specification supports useful output from appropriately matched 4-ohm amplification.\u003c\/p\u003e\u003cp\u003eThe coaxial layout places a 1.4-inch PEI dome tweeter at the center of the polypropylene woofer. Its acoustic lens and faceplate are designed to support off-axis high-frequency dispersion, which is useful when speakers are mounted away from the primary listening position. A sealed built-in crossover directs frequencies between the woofer and tweeter and includes resettable solid-state tweeter protection.\u003c\/p\u003e\u003cp\u003eThe woofer uses a UV-inhibitor polypropylene cone with a co-molded Santoprene surround and a 1-inch voice coil. An aramid-fiber spider and silicone-insulated lead wires support long-term operation in demanding outdoor environments. The high-density ferrite woofer magnet and FEM-optimized high-excursion motor are designed for infinite-baffle applications common in marine speaker mounting locations.\u003c\/p\u003e\u003cp\u003eThe HMX6-5-LD-TW is part of Hertz's HMX LD speaker family and can be paired with the optional HM RGB 1 BK controller for RGB lighting control. It is intended for systems using standard 4-ohm speaker channels, including compatible marine source units and external amplifiers. Its IP65 rating and stated UV and salt-fog testing support use in marine and powersports-oriented installations when installed correctly.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated RGB LEDs:\u003c\/strong\u003e Built-in multicolor lighting is positioned below the tweeter behind a transparent polypropylene diffuser.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine Environmental Protection:\u003c\/strong\u003e IP65 protection, UV-resistance testing, and salt-fog testing support exposed installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Coaxial Layout:\u003c\/strong\u003e Combines a woofer and centrally mounted tweeter in one speaker location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W Continuous Handling:\u003c\/strong\u003e Supports appropriately matched amplification for higher-output marine audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcoustic Lens Tweeter:\u003c\/strong\u003e The PEI dome tweeter and lens are engineered for off-axis high-frequency dispersion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In Protection:\u003c\/strong\u003e A sealed crossover includes a resettable solid-state circuit for tweeter protection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe HMX6-5-LD-TW uses a UV-inhibitor polypropylene cone, co-molded Santoprene surround, aramid-fiber spider, and a marine-grade polymer basket and grille. Its tweeter uses a neodymium magnet, PEI dome, and sound-transparent stainless-steel mesh grille. Gold-plated corrosion-resistant terminals are provided for speaker connections.\u003c\/p\u003e\u003cp\u003eConfirm the available mounting area against the published physical dimensions before cutting a panel: the outer diameter is 172.2 mm, dimension B is 128 mm, mounting depth is 69 mm, and overall depth is 95.6 mm. Use a 4-ohm-compatible source unit or amplifier and account for the 75-watt continuous rating per speaker when system matching. The integrated RGB lighting is designed for use with the Hertz HM RGB 1 BK controller accessory.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":47970405187747,"sku":"HMX6-5-LD-TW","price":210.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71zc0BwnoaL.jpg?v=1786153015"},{"product_id":"hertz-hmx6-5s-ld-g","title":"Hertz HMX6-5S-LD-G 6.5\" Marine RGB Speakers","description":"\u003cp\u003eThe Hertz HMX6-5S-LD-G is a pair of 6.5-inch two-way marine and powersports coaxial speakers with gray sport grilles and integrated RGB LED illumination. They are designed for open-air installations where water exposure, UV, vibration, dust, and temperature changes are practical concerns. Their 4-ohm design makes them suitable for many marine, ATV, UTV, and off-road audio systems.\u003c\/p\u003e\u003cp\u003eEach speaker is rated for 75 watts continuous power handling and 150 watts peak power handling. The 50 Hz to 25 kHz frequency response is intended to cover bass, midrange, and treble from a single coaxial location. With 89 dB SPL sensitivity, these speakers can be paired with a properly matched marine-rated amplifier or compatible head-unit power.\u003c\/p\u003e\u003cp\u003eThe HMX6-5S-LD-G uses a 1.4-inch PEI dome tweeter with a neodymium magnet, acoustic lens, and protective stainless-steel mesh grille. This arrangement is designed to support off-axis high-frequency dispersion, which can be useful when speakers are mounted low in a boat panel or away from the listening position. A sealed built-in crossover separates the woofer and tweeter sections.\u003c\/p\u003e\u003cp\u003eIts woofer uses a UV-inhibitor polypropylene cone, co-molded Santoprene surround, aramid-fiber spider, and silicone-insulated lead wires. The long-throw 25 mm woofer voice coil is tuned for infinite-baffle applications, such as boat side panels, consoles, and other open mounting surfaces. A high-density ferrite woofer magnet provides the motor structure for the moving assembly.\u003c\/p\u003e\u003cp\u003eIntegrated RGB lighting sits beneath the tweeter and uses a transparent polypropylene diffuser. Lighting control requires the optional Hertz HM RGB 1 BK accessory rather than being built into the speaker package. The HMX6-5S-LD-G can serve as a direct marine speaker upgrade or as part of a larger Hertz marine and powersports audio system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W Continuous Handling:\u003c\/strong\u003e Supports properly matched amplification for marine and powersports use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated RGB LEDs:\u003c\/strong\u003e Adds lighting capability with the optional HM RGB 1 BK controller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in one 6.5-inch speaker location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Dome Tweeter:\u003c\/strong\u003e Uses an acoustic lens for broad off-axis high-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Ready Construction:\u003c\/strong\u003e IP65-rated design is tested for UV and salt-fog exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfinite-Baffle Woofer:\u003c\/strong\u003e Optimized for open-panel marine and powersports mounting applications.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe speaker combines a UV-inhibitor polypropylene cone, Santoprene surround, marine-grade polymer basket, stainless-steel tweeter mesh, and gold-plated corrosion-resistant terminals. Hertz specifies IP65 protection, ASTM-D4329 UV-resistance testing, and ASTM-B117 salt-fog operability. The gray sport grille provides the finished appearance for exposed installations.\u003c\/p\u003e\u003cp\u003eVerify the available mounting surface before installation: the listed cutout diameter is 128 mm (5.04 inches), mounting depth is 69 mm (2.72 inches), and overall depth is 95.6 mm (3.76 inches). Use the supplied mounting hardware where appropriate and match the amplifier or source to the 4-ohm load and 75-watt continuous rating. For RGB illumination, plan separate wiring and add the optional Hertz HM RGB 1 BK controller.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":47970405220515,"sku":"HMX6-5S-LD-G","price":275.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71ldYiWRFML.jpg?v=1786153017"},{"product_id":"hertz-hmx8ld-tc","title":"Hertz HMX8LD-TC 8\" RGB LED Marine Coaxial Speakers","description":"\u003cp\u003eThe Hertz HMX8LD-TC is a pair of 8-inch, 4-ohm marine coaxial speakers designed for boats and powersports installations that need durable full-range sound and integrated RGB lighting. Each speaker combines a woofer and tweeter in one assembly, helping simplify an audio upgrade where dedicated component-speaker mounting is not practical. The black tone-on-tone grille suits installations where a darker, coordinated appearance is preferred.\u003c\/p\u003e\u003cp\u003eWith 100 watts continuous and 200 watts peak power handling, these speakers are intended for systems using a capable marine-rated head unit or external amplifier. Their 91 dB sensitivity and 45 Hz to 25 kHz frequency response support clear output across bass, midrange, and treble frequencies. The 4-ohm load is compatible with many conventional marine and car-audio amplifier channels.\u003c\/p\u003e\u003cp\u003eThe HMX8LD-TC uses a 1.4-inch PEI-dome tweeter with a neodymium magnet, faceplate, and acoustic lens. This arrangement is designed to improve off-axis high-frequency dispersion, which is useful when speakers are mounted away from the primary listening position. A sealed built-in crossover directs the appropriate frequency ranges to the woofer and tweeter while incorporating resettable solid-state tweeter protection.\u003c\/p\u003e\u003cp\u003eFor outdoor use, the woofer uses a polypropylene cone with UV inhibitors and a co-molded Santoprene surround. Its marine-grade polymer basket, corrosion-resistant gold-plated terminals, aramid-fiber spider, and silicone-insulated lead wires are selected for durability in marine and powersports environments. The model carries an IP65 protection rating and is specified for UV-resistance and salt-fog testing standards.\u003c\/p\u003e\u003cp\u003eIntegrated RGB LEDs are positioned beneath the tweeter and diffuse through a transparent polypropylene cover. The optional Hertz HM RGB 1 BK controller can be used to operate the lighting system. With a 180 mm mounting cutout and 91 mm mounting depth, these speakers fit installations that have sufficient panel space and clearance behind the mounting surface.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Two-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter output in a single marine speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W Continuous Power Handling:\u003c\/strong\u003e Supports amplification matched to 100 watts RMS per speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated RGB LEDs:\u003c\/strong\u003e Adds configurable accent lighting when used with the optional HM RGB 1 BK controller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI-Dome Tweeter:\u003c\/strong\u003e Uses an acoustic lens to support broad off-axis high-frequency dispersion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Ready Materials:\u003c\/strong\u003e UV-inhibited polypropylene, Santoprene, and marine-grade polymer support outdoor use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Built-In Crossover:\u003c\/strong\u003e Separates woofer and tweeter frequencies and includes resettable tweeter protection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe HMX8LD-TC has a black tone-on-tone grille, sound-transparent stainless-steel tweeter mesh, and a marine-grade polymer basket. Its 32 mm woofer voice coil, high-density ferrite woofer magnet, neodymium tweeter magnet, and long-excursion motor system are engineered for high-output marine speaker operation. The speaker is IP65 rated and uses materials selected for exposure to UV, salt fog, water spray, vibration, thermal shock, dust, and mud.\u003c\/p\u003e\u003cp\u003eConfirm a 180 mm cutout, 91 mm mounting depth, and 255 mm overall outside diameter before cutting the mounting surface. Connect each speaker to a compatible 4-ohm amplifier or head-unit channel, observing correct polarity and power matching. For RGB operation, route the separate lighting wiring according to the applicable Hertz instructions and add the optional HM RGB 1 BK controller.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":47970405253283,"sku":"HMX8LD-TC","price":327.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71d0W1TR5dL.jpg?v=1786153019"},{"product_id":"infinity-1022mlt","title":"Infinity 1022MLT 10\" Marine Subwoofer with RGB Lighting","description":"\u003cp\u003eThe Infinity 1022MLT is a 10-inch marine audio subwoofer designed to add low-frequency output to boat and outdoor audio systems. Its 4-ohm design and 250-watt RMS power handling make it suitable for use with a compatible external marine amplifier. The titanium-colored grille and integrated RGB lighting help it coordinate with Infinity Reference Marine speaker installations.\u003c\/p\u003e\u003cp\u003eThis subwoofer is intended for boat, powersports, and other open-air applications where conventional car-audio equipment may be exposed to water, salt spray, sun, and washdowns. It carries an IPX5 marine rating and uses marine-oriented materials throughout its construction. The design focuses on delivering bass from 25 Hz to 500 Hz while supporting the durability needs of exterior installations.\u003c\/p\u003e\u003cp\u003eWith 89 dB sensitivity at 2.83V\/1m, the 1022MLT is engineered for solid output in open-air listening environments. Its 10-inch polypropylene cone and rubber surround are paired with a sealed motor structure and sealed magnet. These elements help support consistent bass reproduction while protecting key components from marine exposure.\u003c\/p\u003e\u003cp\u003eRGB LED lighting is integrated into the subwoofer and supports up to seven wiring-selected color options. Lighting can be operated through a manual hardwired connection or an external lighting controller, which is not included. An RGB lighting pigtail harness is supplied for installation.\u003c\/p\u003e\u003cp\u003eThe 1022MLT is a practical match for an Infinity Reference Marine system when a dedicated low-frequency driver is needed. It mounts in a 9-3\/16-inch cutout and requires 4-7\/16 inches of mounting depth. Pair it with an amplifier that is appropriate for a 4-ohm subwoofer and rated around its 250-watt RMS continuous power capability.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Marine Subwoofer:\u003c\/strong\u003e Adds dedicated bass output to a compatible marine audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250W RMS Power Handling:\u003c\/strong\u003e Supports amplifier matching for sustained listening levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPX5 Marine Rating:\u003c\/strong\u003e Helps suit the speaker for wet outdoor environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB LED Lighting:\u003c\/strong\u003e Provides up to seven wiring-selected illumination color options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Motor Structure:\u003c\/strong\u003e Helps protect internal components from sea spray and washdowns.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone and Rubber Surround:\u003c\/strong\u003e Uses weather-conscious materials for marine-duty bass reproduction.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe 1022MLT combines a titanium-colored grille with a UV-resistant, one-piece cast-polymer basket, sealed magnet, sealed motor structure, polypropylene cone, and rubber surround. Its 10-9\/16-inch external diameter and grille-mounted design provide a finished appearance on a suitable mounting surface. Stainless-steel mounting hardware and a foam gasket are included.\u003c\/p\u003e\u003cp\u003eUse the supplied template and verify the 9-3\/16-inch mounting cutout plus 4-7\/16 inches of mounting depth before cutting. Connect the subwoofer to a compatible 4-ohm amplifier, observing the marked positive and negative speaker terminals. Connect the included RGB pigtail harness for manual lighting wiring, or use a compatible external lighting controller if controller-based operation is desired.\u003c\/p\u003e","brand":"INFINITY","offers":[{"title":"Default Title","offer_id":47970410365091,"sku":"1022MLT","price":153.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71Ppqp6jKKL.jpg?v=1786153291"},{"product_id":"infinity-1022mlw","title":"Infinity 1022MLW 10\" Marine Subwoofer with RGB Lighting","description":"\u003cp\u003eThe Infinity 1022MLW is a 10-inch marine subwoofer designed to add low-frequency output to a boat or other outdoor audio system. Its white finish, included grille, and integrated RGB LED lighting help it coordinate with marine speaker installations. It is built for applications where conventional car-audio subwoofers may not be suited to exposure from sun, salt, sea spray, and washdowns.\u003c\/p\u003e\u003cp\u003eThis passive 4-ohm subwoofer is intended for listeners who want fuller bass from a marine sound system without changing the visible character of the installation. With 250 watts RMS and 750 watts peak power handling, it is designed to pair with an appropriately matched external amplifier. Its 25Hz to 500Hz frequency response supports bass reproduction while leaving higher frequencies to the system's full-range speakers.\u003c\/p\u003e\u003cp\u003eThe 1022MLW uses a polypropylene cone and rubber surround to support durable low-frequency operation in marine environments. Its listed sensitivity is 89dB at 2.83V\/1m, and its free-air resonance is 35.60Hz. The single 4-ohm voice-coil configuration provides a straightforward load for a compatible marine amplifier.\u003c\/p\u003e\u003cp\u003eInfinity equips this model with an IPX5 marine rating and a sealed motor structure for outdoor use. The design also includes a sealed magnet and a UV-resistant one-piece cast-polymer basket. These construction details are intended to help the subwoofer withstand demanding marine installation conditions.\u003c\/p\u003e\u003cp\u003eIntegrated seven-color RGB LED lighting adds visual accent lighting around the subwoofer, and an RGB lighting pigtail harness is included. The 1022MLW can serve as the bass foundation in an Infinity Reference Marine system or as a subwoofer addition to an existing marine audio setup. Its 9-3\/16-inch mounting cutout and 4-7\/16-inch mounting depth should be checked against the available mounting surface before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Marine Subwoofer:\u003c\/strong\u003e Adds dedicated bass output to compatible marine audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250W RMS Power Handling:\u003c\/strong\u003e Matches with appropriately rated external amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 4-Ohm Voice Coil:\u003c\/strong\u003e Provides a standard amplifier load configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPX5 Marine Rating:\u003c\/strong\u003e Supports use in harsh outdoor marine environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeven-Color RGB Lighting:\u003c\/strong\u003e Adds selectable multi-color visual accent lighting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone And Rubber Surround:\u003c\/strong\u003e Uses weather-conscious materials for low-frequency playback.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe 1022MLW has a white marine-grade presentation with an included grille, polypropylene cone, rubber surround, sealed magnet, and sealed motor structure. Its one-piece cast-polymer basket is UV resistant, while stainless steel mounting hardware is supplied for installation. The 10-9\/16-inch external diameter and 1-7\/16-inch top height should be considered when planning panel clearance.\u003c\/p\u003e\u003cp\u003eUse the supplied foam gasket and stainless steel hardware when mounting the subwoofer in a surface with a 9-3\/16-inch cutout and at least 4-7\/16 inches of mounting depth. Connect it to an amplifier designed for a 4-ohm subwoofer load and size amplifier output around the subwoofer's 250-watt RMS rating. The included RGB lighting pigtail harness is used to connect the integrated lighting to a compatible lighting setup.\u003c\/p\u003e","brand":"INFINITY","offers":[{"title":"Default Title","offer_id":47970410397859,"sku":"1022MLW","price":153.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/712yOb-O2qL.jpg?v=1786153294"},{"product_id":"infinity-622mlw","title":"Infinity 622MLW 6.5\" RGB LED Marine Coaxial Speakers","description":"\u003cp\u003eThe Infinity 622MLW is a pair of 6.5-inch two-way marine coaxial speakers designed for boats and other open-air audio installations. Their white finish, integrated grilles, and RGB LED lighting support a clean marine-audio upgrade where both sound and appearance matter. The speakers are rated IPX5 for use in demanding outdoor environments.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for listeners who need clear, full-range sound in conditions where wind, water, and open-air listening can make ordinary speakers less effective. A polypropylene woofer cone handles the main frequency range, while the balanced-dome tweeter is designed to provide smooth high-frequency output. With a 50Hz–20kHz frequency response, the 622MLW covers bass, vocals, and treble from a compact marine speaker location.\u003c\/p\u003e\u003cp\u003eThe 622MLW is rated for 75 watts RMS and 225 watts peak power handling, with a 4-ohm nominal impedance and 92dB sensitivity at 2.83V\/1m. Those specifications make it suitable for a compatible marine receiver or external amplifier. Its 3.5kHz crossover point directs upper frequencies to the integrated tweeter.\u003c\/p\u003e\u003cp\u003eInfinity uses a bridge-mounted, grille-mounted tweeter arrangement that helps seal the front of the woofer cone and reduce the path for water intrusion toward the motor structure. The speaker also uses a sealed motor structure, sealed magnet, rubber surround, and UV-resistant one-piece cast-polymer basket. These construction details are intended for exposure to sun, salt, sea spray, and wash-down conditions.\u003c\/p\u003e\u003cp\u003eIntegrated RGB LEDs add selectable accent lighting to a marine audio system. The included RGB pigtail harness can be hard-wired for color selection or used with an external lighting controller. Install a pair as a direct marine-speaker replacement or combine multiple pairs with a compatible amplifier, source unit, and optional RGB lighting control setup.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPX5 Marine Rating:\u003c\/strong\u003e Supports use in wet outdoor marine environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W RMS Power Handling:\u003c\/strong\u003e Matches compatible receiver or amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in one speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB LED Lighting:\u003c\/strong\u003e Adds selectable color accent lighting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced-Dome Tweeter:\u003c\/strong\u003e Provides smooth, weather-resistant high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Marine Construction:\u003c\/strong\u003e Helps protect internal components from exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe 622MLW has a white marine-speaker design with integrated grille and bridge-mounted tweeter. Its polypropylene cone, rubber surround, UV-resistant cast-polymer basket, sealed magnet, and sealed motor structure are selected for outdoor exposure. The integrated LEDs are wired separately from the audio terminals.\u003c\/p\u003e\u003cp\u003eConfirm a 5-1\/16-inch mounting cutout and 2-11\/16-inch mounting depth before installation. Use the included foam gaskets and stainless-steel mounting hardware, then connect speaker polarity correctly at the audio terminals. For RGB operation, connect the included pigtail harness by the documented hard-wire color scheme or connect it to a compatible external lighting controller.\u003c\/p\u003e","brand":"INFINITY","offers":[{"title":"Default Title","offer_id":47970410463395,"sku":"622MLW","price":144.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61Tj4TkSk7L.jpg?v=1786153298"},{"product_id":"infinity-622mw","title":"Infinity 622MW 6.5\" Marine Coaxial Speakers - White","description":"\u003cp\u003eThe Infinity 622MW is a pair of white 6.5-inch marine coaxial speakers designed for boat and outdoor audio installations. They provide a practical upgrade for factory marine speakers that need to handle open-air listening and regular exposure to moisture. The two-way design combines a woofer and tweeter in each speaker for full-range playback from a compact round mounting format.\u003c\/p\u003e\u003cp\u003eWith 75 watts RMS and 225 watts peak power handling per speaker, the 622MW is suited to marine source units or compatible external amplification. Its 92 dB sensitivity helps it produce useful output without requiring unusually high amplifier power. The 50 Hz to 20 kHz frequency response covers bass, midrange, and treble for everyday on-water listening.\u003c\/p\u003e\u003cp\u003eInfinity uses polypropylene Plus One woofer cones to increase cone area relative to conventional designs in this class. Balanced-dome tweeters are used to reproduce upper-frequency detail, while the coaxial layout keeps the system simple to install. This makes the speakers well suited to locations where a separate tweeter mount is not practical.\u003c\/p\u003e\u003cp\u003eThe 622MW is built for marine use with an IPX5 rating, a polymer basket, rubber surround, and sealed motor structure. Its grille-mounted tweeter allows the front of the woofer cone to be sealed, helping limit water intrusion toward the speaker motor. The white finish and integrated grilles provide a clean appearance for boats and other outdoor installations.\u003c\/p\u003e\u003cp\u003eThese 4-ohm speakers can be used as direct replacements in compatible 6.5-inch marine speaker openings or as part of a broader system upgrade. Pair them with a marine-rated receiver or amplifier that supplies power within their continuous rating. Mounting hardware, gaskets, screw clips, and documentation are included to support installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPX5 Rating:\u003c\/strong\u003e Supports use in marine environments exposed to water spray.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W RMS Handling:\u003c\/strong\u003e Matches compatible marine receivers and amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Coaxial Design:\u003c\/strong\u003e Integrates woofer and tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One Polypropylene Cone:\u003c\/strong\u003e Provides increased effective cone area for output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced-Dome Tweeter:\u003c\/strong\u003e Reproduces detailed high-frequency information from a protected location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Marine Construction:\u003c\/strong\u003e Uses rubber surrounds, polymer basket, and sealed motor structure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe 622MW uses a white grille, polypropylene woofer cone, rubber surround, one-piece polymer basket, and sealed magnet motor structure. Its bridge-mounted, grille-mounted tweeter lets the woofer cone be sealed at the front, an arrangement intended to help protect the motor structure from sea spray. The speakers are designed for marine exposure, including sun, salt, and wash-down conditions.\u003c\/p\u003e\u003cp\u003eConfirm that the mounting location accommodates the 5-1\/16-inch cutout diameter, 2-5\/8-inch mounting depth, and 7-1\/16-inch outside diameter before installation. Use the included mounting gasket, screw clips, and stainless steel mounting hardware, then connect each speaker to a compatible 4-ohm marine audio channel. For system matching, use amplification rated appropriately for the speakers' 75-watt continuous power handling.\u003c\/p\u003e","brand":"INFINITY","offers":[{"title":"Default Title","offer_id":47970410496163,"sku":"622MW","price":82.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71uAa0JsMNL.jpg?v=1786153300"},{"product_id":"infinity-infspkkp600xs","title":"Infinity Kappa Perfect 600XS 6.5\" 2-Way Component Speakers","description":"\u003cp\u003eThe Infinity Kappa Perfect 600XS is a pair of 6.5-inch two-way speakers designed for motorcycle and car audio applications. It provides an upgrade path for riders and vehicle owners who want more flexible speaker placement than a conventional fixed coaxial design. The system uses a removable tweeter arrangement that can be configured as a coaxial or component-style installation.\u003c\/p\u003e\u003cp\u003eThese speakers use a basalt-fiber woofer with Harman's Plus One™ cone technology. The larger effective cone area is designed to support strong low-frequency output from a compact 6.5-inch driver. A 3-ohm impedance and 95 dB sensitivity help the speakers make efficient use of compatible mobile audio amplification.\u003c\/p\u003e\u003cp\u003eHigh frequencies are handled by 1-inch edge-driven polyphenylene sulfide dome tweeters. The removable-tweeter design lets installers retain the tweeter at the speaker or separate it using the included tweeter kits. This makes the 600XS suitable for systems where staging and mounting flexibility are priorities.\u003c\/p\u003e\u003cp\u003eThe Kappa Perfect 600XS is engineered with motorcycle use in mind, including an IPX5-rated speaker front and a weather-resistant rear side. Its neodymium magnet structure supports a lighter-weight design while maintaining efficient motor performance. The black and gray styling is intended to complement motorcycle-oriented installations.\u003c\/p\u003e\u003cp\u003eRated for 80 watts RMS and 240 watts peak per speaker, this pair is suited to a properly matched external amplifier or a capable factory-upgrade system. In-line crossover pigtails are included to support the system's tweeter configuration. Confirm available mounting clearance, wiring, and vehicle-specific fitment before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConvertible Tweeter Design:\u003c\/strong\u003e Removable tweeters support coaxial or component-style installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBasalt-Fiber Woofer:\u003c\/strong\u003e Lightweight cone material supports accurate midbass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One™ Technology:\u003c\/strong\u003e Increased cone area helps improve low-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch PPS Dome Tweeter:\u003c\/strong\u003e Edge-driven design handles high-frequency detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPX5-Rated Front:\u003c\/strong\u003e Front-facing speaker protection supports wet-weather motorcycle use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Magnets:\u003c\/strong\u003e Compact magnet motors help reduce speaker weight.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe 600XS combines basalt-fiber woofer cones, polyphenylene sulfide dome tweeters, neodymium magnet motors, and an IPX5-rated speaker front. Its gloss and satin black treatment, gray accents, and separate Infinity logo badges provide a motorcycle-focused appearance. The rear side is weather-resistant for use in exposed mobile-audio environments.\u003c\/p\u003e\u003cp\u003eInstall the pair in compatible 6.5-inch mounting locations after checking cutout size, depth, grille clearance, and wiring polarity. Use the supplied in-line crossover pigtails and tweeter kits when configuring separated tweeter placement; retain the tweeters in the speaker assembly for a coaxial-style layout. Match amplification to the 80-watt RMS rating per speaker and 3-ohm impedance, and use the included stainless-steel screws where appropriate.\u003c\/p\u003e","brand":"INFINITY","offers":[{"title":"Default Title","offer_id":47970410987683,"sku":"INFSPKKP600XS","price":256.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/81TIdP4KWUL.jpg?v=1786153327"},{"product_id":"jbl-jblmarspkcb62am","title":"JBL CB62 6.5\" 2-Way Marine Speakers with RGB Lighting","description":"\u003cp\u003eThe JBL CB62 is a pair of 6.5-inch, two-way marine full-range speakers designed for boats and other outdoor audio installations. Each speaker combines a woofer and bridge-mounted tweeter in a compact round format for replacing or upgrading existing marine speakers. They provide a 4-ohm load suitable for connection to compatible marine receivers or amplifiers.\u003c\/p\u003e\u003cp\u003eBuilt for exposed environments, the CB62 uses marine-grade components and carries an IPX5 rating from the front of the speaker. Its one-piece polymer basket, polypropylene cone, rubber surround, sealed motor structure, and weather-resistant tweeter materials are intended for use around sun, salt, spray, and wash-down conditions. The front-sealed woofer cone also helps protect the motor structure from sea spray.\u003c\/p\u003e\u003cp\u003eThe speakers are rated for 75 watts RMS and 225 watts peak power handling per speaker pair specification. A 92 dB sensitivity rating at 2.83V and a 50 Hz to 20 kHz frequency response support clear midrange and high-frequency reproduction in open-air listening spaces. The balanced silk dome tweeters are bridge mounted for a smooth high-frequency presentation.\u003c\/p\u003e\u003cp\u003eIntegrated RGB illumination adds visual customization to a marine audio installation. When directly wired to a compatible 12-volt power source, the LED system can display seven colors through wiring combinations. A separate compatible lighting controller can be used for additional color-control options.\u003c\/p\u003e\u003cp\u003eInstallation is designed to present a clean finished appearance with twist-lock grilles that conceal the mounting fasteners. Both gloss white and satin grey grille sets are included, allowing the appearance to be selected during installation. The CB62 can serve as a direct full-range speaker upgrade or as part of a larger marine system with an external amplifier, subwoofer, and compatible RGB lighting control.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W RMS Power Handling:\u003c\/strong\u003e Supports compatible marine receiver or amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPX5 Front Rating:\u003c\/strong\u003e Helps accommodate marine spray and wash-down exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB Cone Illumination:\u003c\/strong\u003e Provides seven hard-wired color options without a controller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced Silk Dome Tweeters:\u003c\/strong\u003e Delivers weather-resistant high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwist-Lock Grilles:\u003c\/strong\u003e Conceal mounting hardware for a clean installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Grille Colors:\u003c\/strong\u003e Includes gloss white and satin grey grille options.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe JBL CB62 uses a one-piece polymer basket with a polypropylene cone and rubber surround. Its bridge-mounted silk dome tweeter and sealed motor structure are designed to help manage exposure to marine conditions. The included twist-lock grille system covers the mounting hardware and supports either a gloss white or satin grey appearance.\u003c\/p\u003e\u003cp\u003eVerify the available cutout diameter, mounting depth, and clearance behind the panel before installation. Connect the speaker leads to the appropriate positive and negative outputs of a compatible source unit or amplifier, observing polarity. For illumination, connect the included RGB pigtail harness to a compatible 12-volt power source or separately sold lighting controller, and orient the speaker with its TOP marker upward so the terminals face downward for drainage.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":47970414362787,"sku":"JBLMARSPKCB62AM","price":125.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61tI7uMRiYL.jpg?v=1786153397"},{"product_id":"jbl-jblmarspkcb82am","title":"JBL CLUB 82 8\" Marine 2-Way RGB Speakers","description":"\u003cp\u003eThe JBL CLUB 82 is a pair of 8-inch, 2-way marine speakers designed for boat and outdoor audio systems. They provide a larger-format speaker option for installations that need strong output and broad frequency coverage in open-air environments. With 150 watts RMS power handling per speaker, they are suited to systems powered by a compatible marine amplifier or head unit.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for boat owners and outdoor-audio builders who need sound components made for exposure to moisture and weather. The front of each speaker carries an IPX5 marine rating, while JBL specifies marine-grade materials and components for demanding installations. Their 4-ohm nominal impedance makes them compatible with many conventional marine audio amplifiers.\u003c\/p\u003e\u003cp\u003eThe CLUB 82 uses a 2-way design with weather-resistant, bridge-mounted balanced silk dome tweeters. This arrangement is designed to reproduce high frequencies smoothly while the 8-inch driver handles the broader musical range. The specified 30 Hz to 20 kHz frequency response supports full-range listening without making the speakers a replacement for a dedicated subwoofer.\u003c\/p\u003e\u003cp\u003eIntegrated RGB cone illumination adds visual customization to a marine installation. The included RGB pigtail harnesses can be hard-wired to a compatible 12-volt source for seven preset color combinations, or connected to a separately sold external lighting controller for expanded control. Speaker signal wiring and RGB lighting wiring are separate connections.\u003c\/p\u003e\u003cp\u003eJBL includes both gloss-white and satin-grey twist-lock grilles so the finished look can be selected during installation. The grille system conceals the mounting fasteners for a clean surface appearance. In a complete system, the CLUB 82 can serve as a primary pair of full-range cockpit, tower, or outdoor-zone speakers alongside a compatible source unit, amplifier, and optional RGB controller.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch 2-Way Design:\u003c\/strong\u003e Provides full-range sound from a larger marine speaker format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150W RMS Handling:\u003c\/strong\u003e Supports use with appropriately matched amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPX5 Front Rating:\u003c\/strong\u003e Helps suit the speaker front for marine exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced Silk Dome Tweeter:\u003c\/strong\u003e Delivers smooth, weather-resistant high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB Cone Lighting:\u003c\/strong\u003e Offers seven hard-wired colors or controller-based expansion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwist-Lock Grilles:\u003c\/strong\u003e Includes gloss-white and satin-grey grille choices.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CLUB 82 combines marine-grade construction with a weather-resistant silk dome tweeter, polypropylene cone, synthetic-rubber surround, and front IPX5 marine rating. Its two included grille sets use a twist-lock attachment method that hides the mounting hardware. JBL also states that the product is engineered to meet RoHS 2.0 and TSCA requirements.\u003c\/p\u003e\u003cp\u003eConfirm that the mounting surface supports the 6-11\/16-inch cutout and 3-5\/16-inch mounting-depth requirements before installation. Apply the included foam gasket to the speaker frame, orient the marked top upward so the terminals face downward for drainage, and connect speaker wiring with correct polarity. RGB lighting requires the included harness and a compatible 12-volt power source or separately sold lighting controller.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":47970414952611,"sku":"JBLMARSPKCB82AM","price":188.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61AqWmSGJ0L.jpg?v=1786153423"},{"product_id":"jbl-jblmarspksd62gam","title":"JBL JBLMARSPKSD62GAM 6.5\" RGB Marine Speakers","description":"\u003cp\u003eThe JBL JBLMARSPKSD62GAM Stadium Marine 62 is a pair of 6-1\/2-inch, two-way coaxial marine speakers designed for boats and other exposed audio installations. It combines full-range playback with integrated RGB perimeter lighting in a gray grille design. The speakers are intended for listeners who need a marine-ready replacement or upgrade without adding separate tweeters.\u003c\/p\u003e\u003cp\u003eWith a 100-watt RMS power-handling rating, 300-watt peak rating, and 92 dB sensitivity, these speakers are built to provide useful output in open-air environments. Their 40 Hz to 25 kHz frequency response covers bass, vocals, and high-frequency detail from one coaxial speaker assembly. A 3-ohm nominal impedance can help draw more output from compatible marine amplification.\u003c\/p\u003e\u003cp\u003eJBL uses Plus One polypropylene woofer cones to increase cone area within the speaker frame. The design is paired with grille-mounted Mylar tweeters, which keep the front of the woofer cone sealed while reproducing high frequencies. Rubber surrounds, sealed magnets, and a one-piece polymer basket support long-term use around sun, moisture, and salt exposure.\u003c\/p\u003e\u003cp\u003eIntegrated RGB perimeter illumination adds seven selectable colors without an external controller. An optional compatible external lighting controller can be used for expanded custom-color control. Two LED cables are included for connecting the lighting system during installation.\u003c\/p\u003e\u003cp\u003eThe Stadium Marine 62 fits a system using a marine receiver or external amplifier and can serve as a primary full-range speaker pair in a boat, personal watercraft, or similarly exposed application. Its 5-23\/32-inch mounting cutout and 2-9\/16-inch mounting depth should be checked against the available mounting surface before installation. For a complete upgrade, pair it with compatible amplification, marine-rated wiring, and an optional RGB lighting controller if custom lighting control is desired.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter playback in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One Woofer Cones:\u003c\/strong\u003e Increased cone area supports low-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMylar Tweeters:\u003c\/strong\u003e Grille-mounted tweeters provide smooth high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB Perimeter Lighting:\u003c\/strong\u003e Displays seven colors without a separate controller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Ready Construction:\u003c\/strong\u003e UV-resistant materials help withstand marine exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100-Watt RMS Handling:\u003c\/strong\u003e Supports compatible higher-output marine amplification.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThese gray Stadium Marine speakers use polypropylene cones, rubber surrounds, sealed magnets, and one-piece polymer baskets. The fixed polymer grilles are sealed and UV resistant, while the weather-resistant design is rated IPX3 overall and IPX5 from the front. JBL specifies 300 hours of salt-spray testing for the Stadium Marine speaker line.\u003c\/p\u003e\u003cp\u003eEach speaker requires a 5-23\/32-inch mounting cutout and 2-9\/16 inches of mounting depth, with an external diameter of 7-15\/32 inches. Install using the supplied foam gaskets, stainless-steel screws, and speed clips where appropriate, then connect the speaker leads and included LED cables. Confirm amplifier stability at the speakers' 3-ohm nominal impedance, and use an optional external lighting controller only when custom RGB colors are wanted.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":47970415444131,"sku":"JBLMARSPKSD62GAM","price":111.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61Oub6C_RWS.jpg?v=1786153449"},{"product_id":"jbl-jblmarspksd82mgam","title":"JBL JBLMARSPKSD82MGAM 8\" 3-Way Convertible Marine Speakers","description":"\u003cp\u003eThe JBL JBLMARSPKSD82MGAM Stadium Marine system is a pair of 8-inch three-way convertible speakers designed for marine audio installations. It provides a flexible upgrade for boats and watercraft where conventional speaker placement can be limiting. Each system can be used with the midrange\/tweeter assembly mounted coaxially or configured with the high-frequency section separately.\u003c\/p\u003e\u003cp\u003eWith 200 watts RMS and 500 watts peak power handling, these speakers are intended for amplified marine systems that need substantial output. The 3-ohm nominal impedance and 92 dB sensitivity help them make effective use of compatible amplifier power. Their 30 Hz to 22 kHz frequency response covers bass, midrange, and treble duties in one speaker system.\u003c\/p\u003e\u003cp\u003eJBL uses Plus One polypropylene cones for both the woofer and midrange sections. The larger effective cone area supports stronger low-frequency output than a conventional cone shape of the same overall size. Mylar tweeter domes handle upper-frequency detail, while integrated grilles help seal the front of the woofer cones.\u003c\/p\u003e\u003cp\u003eThe Stadium Marine 8's convertible layout is useful when a single coaxial mounting location is preferred or when the high-frequency section needs to be positioned separately. The included cable connects the woofer and tweeter section when using the component-style arrangement. This gives installers options to work around helm, console, and panel layout constraints.\u003c\/p\u003e\u003cp\u003eMarine-focused construction includes a one-piece polymer basket, sealed magnet, rubber surround, UV-resistant materials, and an IPX3 weather-resistance rating that increases to IPX5 from the front. RGB perimeter illumination offers seven direct-wired colors, with additional color control available through a compatible external lighting controller. The pair can serve as a primary full-range speaker upgrade in a properly powered marine audio system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Way Convertible Design:\u003c\/strong\u003e Mount coaxially or separate the high-frequency section for placement flexibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200-Watt RMS Handling:\u003c\/strong\u003e Supports amplified marine audio systems with substantial continuous power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One Polypropylene Cones:\u003c\/strong\u003e Provides increased effective cone area for low-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB Perimeter Illumination:\u003c\/strong\u003e Delivers seven direct-wired colors or controller-based color customization.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Ready Construction:\u003c\/strong\u003e Uses UV-resistant materials, sealed magnets, and rubber surrounds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront IPX5 Protection:\u003c\/strong\u003e Adds water-jet resistance from the front-facing side.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThese grey Stadium Marine speakers use a one-piece cast polymer basket, sealed magnet structure, rubber woofer surround, Plus One polypropylene woofer and midrange cones, and Mylar tweeter domes. Their materials are designed for exposure to sun, salt, and moisture in marine environments. JBL also specifies UV resistance and 300 hours of salt-spray testing for the Stadium Marine line.\u003c\/p\u003e\u003cp\u003ePlan for a 7-inch woofer cutout and 3-3\/16 inches of mounting depth when installing the speaker in its coaxial configuration. If the tweeter section is separated, its mounting bracket requires a 4-9\/16-inch cutout; use the included cable to connect it to the woofer. Connect the RGB wiring to a compatible 12-volt source or optional lighting controller, and do not wire two or more of these 3-ohm speakers in parallel to one amplifier channel.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":47970415476899,"sku":"JBLMARSPKSD82MGAM","price":130.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61fpN9RY4yS.jpg?v=1786153451"},{"product_id":"jbl-jblmarspkst6gryam","title":"JBL JBLMARSPKST6GRYAM 6.5\" Stage Marine Speakers","description":"\u003cp\u003eThe JBL JBLMARSPKST6GRYAM Stage Marine 6 speakers are a gray 6-1\/2-inch, two-way marine speaker pair designed for boat audio systems. They provide a direct way to replace weather-worn factory speakers or build an outdoor-capable sound system for a boat. Each speaker is rated for 60 watts RMS and uses a 4-ohm nominal impedance.\u003c\/p\u003e\u003cp\u003eOpen-water listening brings wind, engine noise, and little acoustic reinforcement, so these speakers are tuned for outdoor use. Their 90 dB sensitivity and 60 Hz to 20 kHz frequency response support clear, full-range playback from a compatible marine stereo or amplifier. A grille-mounted 1\/2-inch balanced dome tweeter handles high-frequency detail while the woofer covers the main musical range.\u003c\/p\u003e\u003cp\u003eThe Stage Marine 6 is built for locations exposed to spray and sunlight. JBL specifies an IPX5 marine rating, a one-piece polymer basket, rubber surround, and weather-resistant tweeter construction. The grille-mounted tweeter design also helps protect the front of the woofer cone from water intrusion.\u003c\/p\u003e\u003cp\u003eThese speakers use sealed polypropylene cones and attached gray grilles for a clean, integrated appearance. Their 7-5\/64-inch outside diameter, 5-1\/32-inch cutout requirement, and 2-3\/4-inch mounting depth provide the key measurements needed when replacing existing 6.5-inch marine speakers. Stainless-steel mounting hardware and a foam gasket are included for installation.\u003c\/p\u003e\u003cp\u003eUse a pair as the main full-range speakers in a compact marine audio system, or combine multiple pairs with a compatible marine receiver and amplifier for broader boat coverage. JBL includes two speaker pigtail harnesses to support the connection process. For system matching, provide each speaker with an amplifier channel rated appropriately for its 60-watt RMS power handling at 4 ohms.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Two-Way Design:\u003c\/strong\u003e Combines a woofer and 1\/2-inch tweeter for full-range marine playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W RMS Power Handling:\u003c\/strong\u003e Supports properly matched marine stereo or amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPX5 Marine Rating:\u003c\/strong\u003e Built for exposure to water spray in marine environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced Dome Tweeter:\u003c\/strong\u003e Grille-mounted tweeter supports clear high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolymer and Rubber Construction:\u003c\/strong\u003e One-piece polymer basket and rubber surround support outdoor durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGray Attached Grilles:\u003c\/strong\u003e Provides a coordinated marine-ready appearance without separate grille fitting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe JBLMARSPKST6GRYAM uses a one-piece polymer basket, sealed polypropylene cone, rubber surround, weather-resistant balanced dome tweeter, and UV-resistant gray grille. Its grille-mounted tweeter is positioned above the woofer cone, helping reduce the path for water intrusion. The speaker is specified for IPX5-rated marine use and is intended for exposed boat-audio locations.\u003c\/p\u003e\u003cp\u003eConfirm a 5-1\/32-inch mounting cutout and at least 2-3\/4 inches of mounting depth before installation; the outside diameter is 7-5\/64 inches. The package includes a foam gasket, stainless-steel mounting hardware, a drill bit, and two pigtail harnesses. Connect each speaker to a compatible 4-ohm marine receiver or amplifier, observe polarity, and use the included gasket when mounting to help create a proper seal.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":47970415509667,"sku":"JBLMARSPKST6GRYAM","price":100.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61ZCSgpAy5S_9b2e006b-7536-41a8-93ff-34a881f7045e.jpg?v=1786153453"},{"product_id":"jbl-jblmarspkst6whtam","title":"JBL JBLMARSPKST6WHTAM 6.5\" Two-Way Marine Speakers","description":"\u003cp\u003eThe JBL Stage Marine 6.5-inch speakers are a white, two-way marine audio pair designed for boats and other open-air installations. They provide a practical upgrade for systems that need clear, full-range sound in environments with wind, engine noise, sun, and spray. Each speaker combines a woofer and a grille-mounted tweeter in a compact 6.5-inch format.\u003c\/p\u003e\u003cp\u003eWith 60 watts RMS and 180 watts peak power handling, these speakers are suited to marine head units or external amplifiers that are matched to their 4-ohm load. Their 90 dB sensitivity helps them produce useful output from modest amplifier power. The 60 Hz to 20 kHz frequency response covers bass, vocals, and high-frequency detail for everyday on-water listening.\u003c\/p\u003e\u003cp\u003eA polypropylene woofer cone and balanced dome tweeter support a balanced presentation with defined highs and usable low-frequency response. The tweeter is bridge-mounted in the grille rather than placed through the cone. This design helps seal the front of the woofer cone and reduce the path for water intrusion toward the motor structure.\u003c\/p\u003e\u003cp\u003eThe Stage Marine 6.5 is built for exposed marine use with an IPX5 marine rating. Its sealed motor structure, one-piece UV-resistant cast-polymer basket, rubber surround, and attached grille are intended to withstand sun, salt, sea spray, and washdowns. The white finish is well suited to many boat interiors, consoles, and deck panels.\u003c\/p\u003e\u003cp\u003eThese speakers fit a system built around a compatible 4-ohm marine receiver or amplifier and can be used as front, rear, or cockpit speakers. Their 5-1\/32-inch mounting cutout supports installation in properly prepared panels with adequate rear clearance. A pair of speakers, mounting hardware, foam gasket, speaker pigtail harnesses, and installation accessories are included for a more straightforward installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPX5 Marine Rating:\u003c\/strong\u003e Helps the speakers handle spray, washdowns, and demanding outdoor conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Design:\u003c\/strong\u003e A woofer and separate tweeter cover low, mid, and high frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W RMS Power Handling:\u003c\/strong\u003e Supports use with compatible marine receivers and external amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced Dome Tweeter:\u003c\/strong\u003e Delivers smooth high-frequency response in an exposed environment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Motor Structure:\u003c\/strong\u003e Helps protect internal speaker components from sea spray.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Resistant Polymer Basket:\u003c\/strong\u003e Built to withstand prolonged sun and salt exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Stage Marine 6.5 uses a polypropylene cone, rubber surround, one-piece cast-polymer basket, and attached white grille. Its grille-mounted balanced dome tweeter and sealed woofer-cone front are part of the marine-focused design. Stainless steel mounting hardware is included for corrosion-conscious installation.\u003c\/p\u003e\u003cp\u003eVerify the available panel space before installation: each speaker requires a 5-1\/32-inch cutout and 2-3\/4 inches of mounting depth. Use the included foam gasket between the speaker and mounting surface, connect the included pigtail harnesses with correct polarity, and pair the speakers with a compatible 4-ohm marine audio source. The included drill bit and mounting hardware can assist with installation in suitable boat panels.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":47970415542435,"sku":"JBLMARSPKST6WHTAM","price":100.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/5184gdr9VhS.jpg?v=1786153455"},{"product_id":"jbl-jblmarspkst8gryam","title":"JBL JBLMARSPKST8GRYAM 8\" Two-Way Marine Speakers, Gray","description":"\u003cp\u003eThe JBL Stage Marine 8 is a pair of 8-inch two-way marine speakers designed for boat audio systems that need clear sound in open-air conditions. Their 4-ohm design makes them suitable for connection to compatible marine receivers or amplifiers. The gray finish provides an alternative to standard white marine speaker styling.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for boat owners upgrading factory speakers or building a marine audio system from the ground up. The 8-inch woofer format offers greater cone area than smaller marine speakers while retaining a conventional flush-mount installation format. They are supplied as a stereo pair, allowing one left\/right speaker location to be equipped from a single package.\u003c\/p\u003e\u003cp\u003eJBL rates the Stage Marine 8 at 125 watts RMS and 375 watts peak power handling, with a 50 Hz to 20 kHz frequency response. Sensitivity is rated at 90 dB at 2.83V, and nominal impedance is 4 ohms. A grille-mounted 1-inch balanced-dome tweeter handles high-frequency detail while the larger woofer supports full-range playback.\u003c\/p\u003e\u003cp\u003eMarine-focused construction helps address exposure to spray, sunlight, salt, and changing temperatures. The speakers carry an IPX5 marine rating and use one-piece polymer baskets, rubber surrounds, and attached UV-resistant grilles. Their bridge-mounted tweeters allow the front of the woofer cone to remain sealed to help protect the motor structure from sea spray.\u003c\/p\u003e\u003cp\u003eThe Stage Marine 8 works well as a direct speaker upgrade in compatible 8-inch cutouts or as part of a larger multi-speaker marine system. Pair it with a compatible 4-ohm marine amplifier or receiver and correctly sized wiring for the installation. For deeper low-frequency output, it can be combined with a separate marine subwoofer and appropriate amplification.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Two-Way Design:\u003c\/strong\u003e Combines an 8-inch woofer and 1-inch tweeter for full-range marine audio.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e125W RMS Power Handling:\u003c\/strong\u003e Supports amplified marine systems rated for 4-ohm speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPX5 Marine Rating:\u003c\/strong\u003e Built for harsh outdoor and marine environments with water-spray resistance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced-Dome Tweeter:\u003c\/strong\u003e Delivers smooth high-frequency playback from a grille-mounted location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolymer And Rubber Construction:\u003c\/strong\u003e One-piece polymer basket and rubber surround support marine durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Pair Package:\u003c\/strong\u003e Includes two speakers, mounting hardware, gasket, harnesses, and installation accessories.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eEach speaker uses a one-piece polymer basket, rubber surround, attached grille, and grille-mounted balanced-dome tweeter. The gray grille and speaker assembly are designed for marine installations, while the UV-resistant grille and sealed woofer-cone arrangement help address exposure to sun and sea spray. JBL specifies an IPX5 marine rating for the speaker system.\u003c\/p\u003e\u003cp\u003eVerify available panel clearance before installation: each speaker requires an 8-49\/64-inch (172 mm) mounting cutout, has an 8-27\/32-inch (225 mm) external diameter, and needs 3-17\/32 inches (90 mm) of mounting depth. The package includes stainless-steel mounting hardware, a drill bit, foam gasket, and two speaker pigtail harnesses. Use the supplied gasket and follow the included quick-start guide when mounting and wiring the speakers to a compatible 4-ohm marine audio system.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":47970415575203,"sku":"JBLMARSPKST8GRYAM","price":157.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61ZCSgpAy5S.jpg?v=1786153457"},{"product_id":"jbl-jblmarsubsd102gam","title":"JBL JBLMARSUBSD102GAM 10\" Stadium Marine Subwoofer","description":"\u003cp\u003eThe JBL JBLMARSUBSD102GAM is a 10-inch Stadium Marine woofer designed to add low-frequency output to boat and watercraft audio systems. It is intended for installations where open-water conditions, engine noise, and wind can make it difficult for music to sound full and balanced. With 300 watts RMS power handling, it is suited to a dedicated marine amplifier and subwoofer-capable system.\u003c\/p\u003e\u003cp\u003eThis marine woofer uses a Plus One polypropylene cone to provide increased effective cone area. The larger cone area helps move more air for stronger bass output while retaining the durable characteristics needed for marine use. Its 20Hz to 2kHz frequency response gives it the range to handle bass and lower midbass duties in an appropriate system.\u003c\/p\u003e\u003cp\u003eSelectable Smart Impedance, or SSI, lets the installer select either a 2-ohm or 4-ohm load using the woofer's built-in switch. This provides flexibility when matching the woofer to an amplifier or planning a system with multiple subwoofers. Choose the impedance setting before connecting the amplifier and configure the amplifier for the selected load.\u003c\/p\u003e\u003cp\u003eRGB perimeter illumination adds visible accent lighting around the woofer for nighttime use. The woofer can display seven colors without an external controller, while an optional compatible lighting controller can expand color customization. An integrated grille is included to help protect the front of the woofer in a marine installation.\u003c\/p\u003e\u003cp\u003eIts one-piece polymer basket, rubber surround, UV-resistant grille, and marine-oriented construction are designed for exposure to sun, moisture, and salt-air conditions. The woofer is suited for infinite-baffle, sealed-enclosure, or ported-enclosure applications. It can be used as the bass foundation for a Stadium Marine speaker system or as an upgrade to an existing amplified marine audio setup.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W RMS Power Handling:\u003c\/strong\u003e Supports use with a properly matched marine amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSSI Impedance Switch:\u003c\/strong\u003e Select 2-ohm or 4-ohm operation for system flexibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One Polypropylene Cone:\u003c\/strong\u003e Provides increased cone area for bass output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB Perimeter Illumination:\u003c\/strong\u003e Adds seven onboard lighting color options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Ready Construction:\u003c\/strong\u003e Polymer basket and rubber surround support outdoor use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Grille:\u003c\/strong\u003e Helps protect the woofer's front mounting surface.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe JBLMARSUBSD102GAM combines a dark-gray polypropylene cone, rubber surround, one-piece polymer basket, and integrated grille. Its grille is UV resistant, and the marine speaker platform is designed for weather exposure with IPX3 protection overall and IPX5 protection from the front. JBL also specifies 300 hours of salt-spray testing for the Stadium Marine speaker line.\u003c\/p\u003e\u003cp\u003eVerify a 9-9\/16-inch cutout and at least 4-7\/8 inches of mounting depth before installation. Use the included foam gasket, screws, and speed clips as appropriate for the mounting surface, connect the supplied LED cable for illumination, and use a compatible external amplifier. Set the SSI switch to 2 or 4 ohms before wiring the woofer, then match the amplifier's rated load and power output to the selected setting.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":47970415607971,"sku":"JBLMARSUBSD102GAM","price":103.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61zPGiaC5pL.jpg?v=1786153459"},{"product_id":"jbl-jblmarsubst10gryam","title":"JBL JBLMARSUBST10GRYAM 10\" Marine Audio Subwoofer","description":"\u003cp\u003eThe JBL JBLMARSUBST10GRYAM is a 10-inch marine audio subwoofer designed to add low-frequency output to a boat sound system. It is a passive 4-ohm subwoofer, so it requires a compatible external amplifier. The gray finish coordinates with marine installations while providing dedicated bass support for open-air listening.\u003c\/p\u003e\u003cp\u003eBuilt for marine environments, this Stage Marine subwoofer uses an IPX5-rated design with marine-grade materials and components. Its polypropylene cone, rubber surround, one-piece polymer basket, stainless-steel mounting hardware, and UV-resistant grille are intended for exposure to spray, sunlight, and washdowns. These construction details make it suited to boats where conventional car-audio components may not be appropriate.\u003c\/p\u003e\u003cp\u003eThe driver handles 200 watts RMS and 600 watts peak, with a 30 Hz to 250 Hz frequency response. JBL rates sensitivity at 88 dB measured at 2.83V. This combination is intended to reinforce bass frequencies that can be harder to hear in an open-air marine setting.\u003c\/p\u003e\u003cp\u003eInstallation flexibility is a central part of the design. The JBLMARSUBST10GRYAM can be used in an infinite-baffle\/free-air location, a sealed enclosure, or a vented enclosure. That gives installers options based on available boat space and the desired enclosure approach.\u003c\/p\u003e\u003cp\u003eUse this subwoofer as the low-frequency section of a marine system with full-range marine speakers and an amplifier matched for a 4-ohm load. Its 10-inch format offers a practical size for many helm, cockpit, cabin, and storage-compartment installations. JBL includes the primary mounting and connection accessories needed to prepare the driver for installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Marine Subwoofer:\u003c\/strong\u003e Adds dedicated bass reproduction to a compatible boat audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200W RMS Power Handling:\u003c\/strong\u003e Supports amplifier matching up to its continuous power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPX5 Marine Rating:\u003c\/strong\u003e Helps suit the subwoofer to wet outdoor marine environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Provides a marine-ready cone material for bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Enclosure Use:\u003c\/strong\u003e Supports free-air, sealed, or vented installation approaches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGray UV-Resistant Grille:\u003c\/strong\u003e Provides a finished appearance with protection from sunlight exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe JBLMARSUBST10GRYAM combines a polypropylene cone and rubber surround with a one-piece polymer basket. Its attached grille is sealed and UV resistant, while the included mounting hardware is stainless steel. These materials are selected for marine use where moisture, salt spray, and sunlight are common concerns.\u003c\/p\u003e\u003cp\u003eConfirm the 9-11\/64-inch mounting cutout and 4-13\/32-inch mounting-depth requirements before cutting a panel. Connect the subwoofer to an amplifier that is stable at its 4-ohm nominal impedance, then select free-air, sealed, or vented mounting according to available space and system goals. The package includes a foam gasket, subwoofer pigtail harness, drill bit, and mounting hardware to assist with installation.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":47970415640739,"sku":"JBLMARSUBST10GRYAM","price":154.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61EiNMvqQXS.jpg?v=1786153461"},{"product_id":"jbl-mt8hlb","title":"JBL MT8HLB 8\" Marine Tower Speakers With RGB Lighting","description":"\u003cp\u003eThe JBL MT8HLB is a pair of enclosed 8-inch, two-way marine tower speakers designed for wake towers and other marine audio installations. It provides elevated sound placement for boaters who want music directed toward riders as well as passengers. Each speaker combines an 8-inch woofer with a horn-loaded compression tweeter in a purpose-built tower enclosure.\u003c\/p\u003e\u003cp\u003eThis system is suited to boats with a compatible horizontal tower bar measuring 1.75 to 3 inches in diameter. Its adjustable mounting design allows the speakers to be aimed toward the preferred listening area. The enclosed format helps create a clean, integrated tower-speaker installation without requiring a separate speaker enclosure.\u003c\/p\u003e\u003cp\u003eFor performance, the MT8HLB is rated for 150 watts RMS and 450 watts peak power handling per speaker, with a 4-ohm nominal impedance. Its 40 Hz to 20 kHz frequency response covers bass, midrange, and treble duties for a full-range marine speaker setup. A 92 dB sensitivity rating at 2.83V supports strong output with a properly matched marine amplifier.\u003c\/p\u003e\u003cp\u003eJBL uses an 8-inch long-throw polypropylene woofer cone with a rubber surround, paired with a 1-inch titanium horn-loaded compression tweeter. The angled-baffle design is intended to direct sound toward the rider's listening position instead of the water behind the boat. This makes the speaker well suited for wakeboarding and other tow-sports applications.\u003c\/p\u003e\u003cp\u003eIntegrated RGB LED lighting adds visual customization after dark. The lighting can be hardwired for one of seven color options or connected to a compatible RGB lighting controller. The MT8HLB can be used as a dedicated tower-speaker pair in a marine system with a compatible amplifier, source unit, wiring, and 12-volt lighting connection.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Two-Way System:\u003c\/strong\u003e Combines a long-throw woofer and compression tweeter in each enclosed tower speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150W RMS Power Handling:\u003c\/strong\u003e Supports amplifier matching up to 150 watts RMS per speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTitanium Horn Tweeter:\u003c\/strong\u003e The 1-inch horn-loaded compression tweeter is designed for clear high-frequency projection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer:\u003c\/strong\u003e Rigid long-throw woofer cones and rubber surrounds support marine use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB LED Lighting:\u003c\/strong\u003e Offers seven hardwired color choices or compatibility with an RGB controller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e360-Degree Bracket:\u003c\/strong\u003e Rotating brackets allow aiming adjustment and fit compatible 1.75- to 3-inch bars.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MT8HLB uses a black-gloss enclosed speaker body with marine-rated materials and components. Its rigid polypropylene woofer cone, rubber surround, titanium horn tweeter, and integrated RGB lighting are housed in a tower-oriented design. JBL also includes neoprene covers for protecting the speakers when they are not in use.\u003c\/p\u003e\u003cp\u003eMount each speaker to a compatible horizontal wake-tower bar using the supplied two-piece bracket assemblies, rubber pads, bolts, and hex keys. Route speaker and LED wiring through the bracket and tower bar where practical to reduce exposed wire, then use the included safety cables while positioning the speakers. The RGB leads require a compatible 12-volt source or separately sold lighting controller, while speaker wiring should connect to a properly matched 4-ohm marine amplifier channel.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":47970416296099,"sku":"MT8HLB","price":662.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/51DwMUb7MAL.jpg?v=1786153499"},{"product_id":"jvc-cs-dr6200m","title":"JVC CS-DR6200M 6.5\" 2-Way Marine Coaxial Speakers","description":"\u003cp\u003eThe JVC CS-DR6200M is a pair of 6.5-inch, 2-way coaxial marine speakers designed for boats and other exposed recreational installations. They provide a practical replacement or upgrade path where standard vehicle speakers may not suit wet, sunny, or changing outdoor conditions. Their 4-ohm design allows connection to many compatible marine receivers and amplifiers.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for listeners who want full-range sound from a compact round speaker format without adding separate tweeters. The coaxial layout places a balanced-dome tweeter over each woofer, helping cover both midrange and high-frequency content from one mounting location. A 60 Hz to 18.4 kHz frequency response supports clear vocals, instruments, and upper-frequency detail.\u003c\/p\u003e\u003cp\u003eJVC rates each speaker for 50 watts RMS and 150 watts peak power handling at 4 ohms. This makes the CS-DR6200M appropriate for systems powered by a compatible marine receiver or a modest external amplifier. Matching amplifier output to the 50-watt RMS rating helps support reliable operation.\u003c\/p\u003e\u003cp\u003eDurability-focused construction is central to the CS-DR6200M design. The woofers use waterproof polypropylene cones with thermoplastic-elastomer surrounds, while the grilles are UV resistant. Composite speaker baskets and stainless-steel hardware further support use in marine and motorsports environments.\u003c\/p\u003e\u003cp\u003eThe CS-DR6200M fits a straightforward full-range speaker upgrade system. Use a pair as primary speakers, or combine multiple pairs with a compatible marine receiver, amplifier, and subwoofer for broader coverage and bass extension. Its 6.5-inch format and 2-7\/16-inch mounting depth should be checked against available panel clearance before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in each speaker for simple full-range installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50W RMS Power Handling:\u003c\/strong\u003e Supports pairing with compatible marine receivers or amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterproof PP Woofer Cone:\u003c\/strong\u003e Helps the woofer suit moisture-prone outdoor applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Resistant Grilles:\u003c\/strong\u003e Helps protect the speaker fronts in sun-exposed installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch PEI Balanced-Dome Tweeter:\u003c\/strong\u003e Handles upper-frequency reproduction within the coaxial assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite And Stainless Construction:\u003c\/strong\u003e Uses composite baskets and stainless-steel hardware for marine-oriented durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CS-DR6200M uses a black marine-oriented grille, composite basket, ferrite woofer and tweeter magnets, and stainless-steel hardware. Its waterproof polypropylene woofer cone and thermoplastic-elastomer surround are selected for use around moisture, while the UV-resistant grille is suited to exposed mounting locations. The wide-opening grille design minimizes obstruction in front of the speaker.\u003c\/p\u003e\u003cp\u003eVerify that the mounting location accepts a 6.5-inch speaker and provides at least 2-7\/16 inches of mounting depth; a 5-1\/8-inch cutout is listed by a retailer. Connect each speaker to a compatible 4-ohm channel and size the amplifier around the 50-watt RMS rating per speaker rather than peak power. For best results, mount the pair in solid panels, use marine-appropriate wiring practices, and confirm clearance for the grille and rear basket before cutting.\u003c\/p\u003e","brand":"JVC","offers":[{"title":"Default Title","offer_id":47970419605667,"sku":"CS-DR6200M","price":75.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/81hfqKfhZaL_5141ee70-bbed-4f8e-af1c-e2a8b6ec1205.jpg?v=1786153585"},{"product_id":"jvc-cs-dr621mwl","title":"JVC CS-DR621MWL 6.5\" RGB LED Marine Speakers","description":"\u003cp\u003eThe JVC CS-DR621MWL is a white 6.5-inch, 2-way coaxial speaker pair designed for marine and motorsports audio installations. It provides a practical replacement or upgrade for compatible speaker locations where exposure to water is a concern. Integrated RGB LED illumination adds adjustable visual customization without requiring separate light rings.\u003c\/p\u003e\u003cp\u003eThese speakers are rated IPX5 when mounted, helping them withstand water jets from any direction under the applicable test conditions. That makes them suited to boat, UTV, ATV, and other open-air audio applications that need more protection than conventional interior car speakers. The IPX5 rating applies to the speakers, not the remote control.\u003c\/p\u003e\u003cp\u003eEach speaker combines a 6.5-inch polypropylene woofer with a rubber surround and a 1\/2-inch balanced-dome tweeter. With 75 watts RMS power handling at 4 ohms and a 65 Hz to 21 kHz frequency response, the pair is intended for a full-range speaker position. Its 86 dB sensitivity supports use with a properly matched amplifier or compatible receiver.\u003c\/p\u003e\u003cp\u003eThe built-in RGB illumination is controlled with the included RF remote. It offers 21 color selections, 21 dynamic lighting modes, plus adjustable brightness and speed settings. The controller requires a 12-volt DC boat or vehicle battery connection and draws up to 0.5 amp per pair.\u003c\/p\u003e\u003cp\u003eFor larger installations, compatible CS-DR621MWL and CS-DR620MBL speaker pairs can be linked for synchronized lighting. Up to six pairs, or 12 speakers, can be connected and synchronized. This lets a system expand from one pair to a coordinated multi-speaker marine or motorsports installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPX5 Water Resistance:\u003c\/strong\u003e Mounted speakers are designed to withstand water jets for marine and motorsports use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB LED Illumination:\u003c\/strong\u003e Select from 21 colors to tailor the speaker lighting to the installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Lighting Modes:\u003c\/strong\u003e Choose from 21 patterns with adjustable brightness and speed settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W RMS Handling:\u003c\/strong\u003e Supports properly matched 4-ohm amplification for full-range playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Coaxial Design:\u003c\/strong\u003e A polypropylene woofer and balanced-dome tweeter cover bass through treble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpandable Lighting System:\u003c\/strong\u003e Link and synchronize up to six compatible speaker pairs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CS-DR621MWL uses a polypropylene injection woofer cone, rubber surround, ferrite woofer magnet, and neodymium tweeter magnet. Its white finish and UV-resistant woofer construction are intended for exposed marine and motorsports environments. The coaxial layout places the tweeter within the woofer assembly to simplify installation in a single 6.5-inch speaker location.\u003c\/p\u003e\u003cp\u003eConfirm a 5-11\/16-inch cutout and at least 2-9\/16 inches of mounting depth before installation. The package includes two speakers, an RF remote, two 3 m link cables, mounting screws, and a mounting template; the LED controller also needs 12 V DC power and ground wiring. For synchronized lighting, connect compatible CS-DR621MWL or CS-DR620MBL pairs using the supplied link connections and follow the wiring instructions.\u003c\/p\u003e","brand":"JVC","offers":[{"title":"Default Title","offer_id":47970419671203,"sku":"CS-DR621MWL","price":101.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71xDofFMqTL_b594b3b9-e3bc-4961-a26e-e950c162f428.jpg?v=1786153589"},{"product_id":"kenwood-kfc-1613mrw","title":"Kenwood KFC-1613MRW 6.5\" Marine\/Motorsports Speakers","description":"\u003cp\u003eThe Kenwood KFC-1613MRW is a pair of 6.5-inch, 2-way coaxial speakers made for marine and motorsports audio systems. It provides a practical replacement or upgrade for boats, ATVs, UTVs, golf carts, and similar applications where conventional interior car speakers may not be appropriate. The white grille version is designed to suit installations where a light-colored finish is preferred.\u003c\/p\u003e\u003cp\u003eThese speakers use a 4-ohm design that can be connected to a compatible marine receiver, Bluetooth amplifier, or aftermarket car audio amplifier. With a rated input power of 30 watts and 87 dB sensitivity, they are suited to moderate-power audio systems. Their 60 Hz to 20 kHz frequency response supports full-range playback with bass, vocals, and high-frequency detail from a compact coaxial speaker.\u003c\/p\u003e\u003cp\u003eA water-resistant polypropylene woofer cone and rubber surround help the KFC-1613MRW handle exposure to rain, splash, and outdoor conditions. The balanced-dome tweeter is also water resistant, providing integrated high-frequency reproduction without requiring separate tweeter mounting. UV-resistant grilles help protect the speaker face in sun-exposed installations.\u003c\/p\u003e\u003cp\u003eThe 2-way coaxial configuration places the tweeter within the woofer assembly, helping simplify installation where space is limited. This layout is useful for replacing existing 6.5-inch marine or powersports speakers while retaining a clean, flush-mounted appearance. The speaker pair uses fixed white grilles for a finished installation.\u003c\/p\u003e\u003cp\u003eFor system building, the KFC-1613MRW can be used with a compatible 4-ohm marine receiver or amplifier. Its 5-inch cutout requirement and shallow 2-5\/16-inch mounting depth should be checked against the mounting surface and available clearance before installation. The pair includes hardware for mounting, making it suitable for new installations or direct speaker replacement projects.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch 2-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter output in one compact speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible marine, motorsports, and car audio amplifiers or receivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Resistant PP Cone:\u003c\/strong\u003e Polypropylene woofer construction is suited to exposed outdoor applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber Surround:\u003c\/strong\u003e Supports cone movement while adding durability in changing conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced-Dome Tweeter:\u003c\/strong\u003e Provides integrated high-frequency reproduction without a separate tweeter mount.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Resistant White Grille:\u003c\/strong\u003e Helps protect the speaker face in sun-exposed installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-1613MRW uses a water-resistant polypropylene cone, rubber surround, water-resistant balanced-dome tweeter, and UV-resistant fixed white grille. These materials are selected for marine and motorsports environments where speakers may encounter sun, moisture, splash, and dust. The coaxial layout keeps the speaker assembly compact while integrating low- and high-frequency drivers.\u003c\/p\u003e\u003cp\u003eConfirm a 5-inch cutout and at least 2-5\/16 inches of mounting clearance before cutting or mounting. Connect each speaker to a compatible 4-ohm speaker output, observe amplifier or receiver power limits, and use the included stainless-steel screws and speed clips where appropriate. For exposed installations, route and secure speaker wiring to reduce strain and protect connections from moisture.\u003c\/p\u003e","brand":"KENWOOD","offers":[{"title":"Default Title","offer_id":47970422194339,"sku":"KFC-1613MRW","price":31.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61-U_M9eA-S_fa86f7aa-5059-4821-b915-027f3131bf3b.jpg?v=1786153731"},{"product_id":"kenwood-kfc-1633mrw","title":"Kenwood KFC-1633MRW 6.5\" 2-Way Marine Speakers","description":"\u003cp\u003eThe Kenwood KFC-1633MRW is a pair of 6.5-inch, 2-way marine speakers designed for boat and watercraft audio systems. They provide a practical replacement or upgrade path for worn, low-output, or non-marine-rated factory speakers. Their 4-ohm design allows connection to compatible marine receivers or external amplifiers.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for listeners who want clear full-range music reproduction in open-air marine environments. A polypropylene woofer handles the main midrange and lower-frequency duties, while the balanced-dome tweeter supports upper-frequency detail. The result is a straightforward two-way speaker design for everyday on-water listening.\u003c\/p\u003e\u003cp\u003eThe KFC-1633MRW is rated for 20 watts RMS and 100 watts peak power per speaker. Its 84 dB sensitivity and 65 Hz to 20 kHz frequency response describe a speaker suited to moderate-power marine audio systems. Match amplification to the continuous RMS rating rather than the peak-power figure when planning a system.\u003c\/p\u003e\u003cp\u003eKenwood uses a water-resistant polypropylene cone woofer in this model to support use around splashing water and marine conditions. The speaker also uses a balanced-dome tweeter and a fixed white grille. These construction details make it appropriate for installations where exposed speaker locations are common.\u003c\/p\u003e\u003cp\u003eWith a 130 mm cutout requirement and 55.9 mm mounting depth, the KFC-1633MRW can fit many standard 6.5-inch speaker locations when mounting measurements are confirmed first. It can be used as a pair on its own or combined with additional marine speakers and a compatible amplifier. The included mounting hardware and installation template help support a clean installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Two-Way Design:\u003c\/strong\u003e Combines a woofer and tweeter in each speaker for full-range playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20W RMS Power:\u003c\/strong\u003e Supports continuous operation with appropriately matched marine audio equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W Peak Power:\u003c\/strong\u003e Handles short musical peaks within its specified maximum rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Resistant PP Cone:\u003c\/strong\u003e Uses a polypropylene woofer cone suited to marine speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced-Dome Tweeter:\u003c\/strong\u003e Adds high-frequency reproduction from a 1-inch tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible 4-ohm marine receiver or amplifier channels.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-1633MRW uses a 160 mm polypropylene cone woofer, a 25 mm balanced-dome tweeter, and a 227 g magnet. Each speaker is protected by a fixed white grille. The pair has a listed net weight of 1.2 kg with grilles.\u003c\/p\u003e\u003cp\u003eVerify the available mounting depth, cutout diameter, and screw-hole layout before installation. Kenwood specifies a 130 mm cutout, 55.9 mm mounting depth, and four 4 to 4.5 mm mounting holes per speaker. Connect each speaker to a compatible amplifier or receiver output with correct polarity, and use the supplied screws and speed clips where appropriate.\u003c\/p\u003e","brand":"KENWOOD","offers":[{"title":"Default Title","offer_id":47970422227107,"sku":"KFC-1633MRW","price":48.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/510HZvT-PbS_bc0450c9-8e6e-40a5-8fa8-16fb5fec6a42.jpg?v=1786153733"},{"product_id":"kenwood-kfc-1653mrw","title":"Kenwood KFC-1653MRW 6.5\" 2-Way Marine Speakers","description":"\u003cp\u003eThe Kenwood KFC-1653MRW is a pair of 6.5-inch, 2-way marine speakers made for flush-mount audio installations in boats, outdoor vehicles, and other moisture-prone environments. They provide a practical replacement or upgrade for worn factory speakers where conventional car-audio drivers may not be appropriate. The white finish is designed to complement common marine interiors and exterior panels.\u003c\/p\u003e\u003cp\u003eEach speaker combines a water-resistant polypropylene woofer cone with a 1-inch balanced-dome tweeter. This coaxial arrangement places the high-frequency driver within the woofer assembly, helping deliver full-range playback from a single mounting location. Its 60 Hz to 20 kHz frequency response covers bass, vocals, and treble for general-purpose marine listening.\u003c\/p\u003e\u003cp\u003eThe KFC-1653MRW is rated for 50 watts RMS and 150 watts peak power handling at 4 ohms. That makes it suitable for connection to a compatible marine receiver or a properly matched external amplifier. With 86 dB sensitivity at 1 meter, it is intended for systems that prioritize straightforward, balanced sound in open-air environments.\u003c\/p\u003e\u003cp\u003eKenwood uses a Santoprene surround, resin-mold basket, ferrite magnets, and a UV-resistant grille as part of the speaker construction. The polypropylene woofer cone is intended to better tolerate damp conditions than untreated paper-cone designs. A 25 mm PEI balanced-dome tweeter handles upper-frequency detail.\u003c\/p\u003e\u003cp\u003eThese speakers fit naturally into a marine or powersports audio upgrade that needs a conventional 6.5-inch speaker format. They can be used as a pair in cockpit panels, cabin locations, or compatible outdoor vehicle enclosures. Check available panel clearance, cutout size, mounting depth, and amplifier compatibility before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch 2-Way Design:\u003c\/strong\u003e Combines woofer and tweeter performance in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Resistant PP Woofer:\u003c\/strong\u003e Polypropylene cone supports use in damp outdoor environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Balanced-Dome Tweeter:\u003c\/strong\u003e Helps reproduce clear high-frequency information.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50W RMS Power Handling:\u003c\/strong\u003e Matches compatible marine receivers and modest amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Resistant Grille:\u003c\/strong\u003e Adds protection for exposed marine mounting locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with many compatible marine audio systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-1653MRW uses a white resin-mold basket and grille, a water-resistant polypropylene woofer cone, and a Santoprene surround. Its woofer and tweeter use ferrite magnets, while the tweeter employs a PEI balanced-dome diaphragm. The system is designed for marine-quality use and for outdoor or moist conditions.\u003c\/p\u003e\u003cp\u003eVerify that the mounting surface accepts a 5-1\/8-inch cutout and provides at least 2-7\/16 inches of mounting depth. The package includes twelve 4 x 30 mm pan-head tapping screws and twelve speed nuts for mounting. Use compatible speaker wiring and a 4-ohm-rated marine receiver or amplifier, and keep wiring connections protected from moisture.\u003c\/p\u003e","brand":"KENWOOD","offers":[{"title":"Default Title","offer_id":47970422292643,"sku":"KFC-1653MRW","price":77.71,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61gTt0DVMML_8c44e7fc-be3f-4b4d-98e9-9c7820852cf9.jpg?v=1786153735"},{"product_id":"kenwood-kfc-1673mrbl","title":"Kenwood KFC-1673MRBL 6.5\" RGB Marine Speakers","description":"\u003cp\u003eThe Kenwood KFC-1673MRBL is a pair of 6.5-inch, 2-way coaxial marine and motorsports speakers with black grilles and integrated RGB illumination. It is designed for boat, UTV, ATV, and vehicle installations where conventional speakers may be exposed to moisture, sunlight, and outdoor conditions. The built-in lighting adds adjustable visual accenting without requiring separate illuminated speaker rings.\u003c\/p\u003e\u003cp\u003eThese speakers use a water-resistant polypropylene mica woofer cone and a 1\/2-inch PEI balanced-dome tweeter to cover bass, midrange, and treble from a single coaxial assembly. With a 65 Hz to 21 kHz frequency response and 86 dB sensitivity, they are suited to full-range outdoor audio systems. Each pair is rated for 75 watts RMS and 260 watts peak power handling.\u003c\/p\u003e\u003cp\u003eThe KFC-1673MRBL uses an RF wireless remote to control its RGB lighting system. It provides 21 selectable colors, 21 lighting modes, eight brightness steps, and seven speed steps for dynamic effects. The lighting system also includes a last-memory function that recalls its prior operating state after it is turned on.\u003c\/p\u003e\u003cp\u003eMarine-oriented construction includes IPX5 water resistance for the mounted speaker, UV-resistant grilles and cone, a rubber surround, a rubber frame cushion, and stainless-steel mounting hardware. The speaker basket is resin-molded ABS, while the woofer uses a ferrite magnet and the tweeter uses a neodymium magnet. A water-resistant cushion helps reduce water intrusion from the rear side of the woofer.\u003c\/p\u003e\u003cp\u003eThe speakers can be used as a direct replacement where a compatible 6.5-inch mounting location is available, or as part of a new marine or powersports audio system. Their 4-ohm impedance makes them compatible with appropriately matched 4-ohm speaker outputs or amplifier channels. Up to six pairs can be linked and synchronized for coordinated RGB lighting across a larger installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated RGB Lighting:\u003c\/strong\u003e Adjust 21 colors and 21 lighting modes with the included RF remote.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W RMS Power Handling:\u003c\/strong\u003e Supports amplifier or receiver power matched to 75 watts RMS per pair.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPX5 Water Resistance:\u003c\/strong\u003e Helps the mounted speakers withstand water exposure in marine-oriented installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Coaxial Design:\u003c\/strong\u003e Combines a 6.5-inch woofer and 1\/2-inch balanced-dome tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Resistant Components:\u003c\/strong\u003e UV-resistant grille and cone support outdoor installation use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinkable Lighting System:\u003c\/strong\u003e Synchronizes RGB illumination across up to six speaker pairs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-1673MRBL features black fixed grilles, a resin-molded ABS basket, a PP mica woofer cone, rubber surround, and a PEI balanced-dome tweeter. Its hardware includes SUS304 stainless-steel screws and mounting clips, while the LED circuit board has a water-resistant coating. The tweeter is integrated into the grille assembly rather than mounted on a pole piece through the woofer cone.\u003c\/p\u003e\u003cp\u003eVerify a 5-11\/16-inch circular cutout and at least 2-9\/16 inches of mounting depth before installation. Speaker wire is not included; Kenwood recommends 12-22 AWG speaker wire terminated with female spade connectors. The RGB controller requires a 12V DC boat or vehicle electrical system, and a 3A fuse is required when its positive lead is connected directly to the battery.\u003c\/p\u003e","brand":"KENWOOD","offers":[{"title":"Default Title","offer_id":47970422358179,"sku":"KFC-1673MRBL","price":103.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71oEEuETlPL_901a0123-f1fe-4ff6-ab61-336d831e9161.jpg?v=1786153739"},{"product_id":"kenwood-kfc-1673mrwl","title":"Kenwood KFC-1673MRWL 6.5\" 2-Way Marine Speakers","description":"\u003cp\u003eThe Kenwood KFC-1673MRWL is a pair of 6.5-inch, 2-way coaxial marine speakers with integrated RGB illumination and white grilles. They are designed for boat and motorsports installations where conventional interior speakers may be exposed to moisture and sunlight. The pair combines full-range audio reproduction with configurable lighting controlled by an included RF remote.\u003c\/p\u003e\u003cp\u003eWith a 75-watt RMS rating, 260-watt peak input rating, and 4-ohm impedance, these speakers are suited to appropriately matched marine or vehicle audio systems. Their specified 65 Hz to 21 kHz frequency response supports bass, midrange, and high-frequency content from a compact coaxial design. An 86 dB sensitivity rating provides a defined reference for amplifier matching and system planning.\u003c\/p\u003e\u003cp\u003eThe speaker uses a 6.5-inch water-resistant PP mica woofer cone, a rubber surround, and a 1\/2-inch PEI balanced-dome tweeter. The woofer uses a ferrite magnet, while the tweeter uses a neodymium magnet. A rubber frame cushion is used to help limit water intrusion from the rear side of the woofer.\u003c\/p\u003e\u003cp\u003eFor marine-facing durability, the mounted speaker is rated IPX5, and the white grille and cone are UV resistant. Kenwood also specifies a water-resistant coating on the LED circuit board. These measures make the KFC-1673MRWL appropriate for exposed audio locations when installed according to the supplied instructions.\u003c\/p\u003e\u003cp\u003eIntegrated RGB LEDs provide 21 static colors and 21 dynamic lighting modes, with eight brightness settings and seven speed settings. The included RF remote controls illumination functions, and up to six pairs can be linked and synchronized. This makes the speakers a practical choice for adding coordinated audio and accent lighting to a marine or powersports system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W RMS Power:\u003c\/strong\u003e Supports amplifier matching for sustained listening levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPX5 Water Resistance:\u003c\/strong\u003e Helps protect the mounted speakers from water exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB LED Lighting:\u003c\/strong\u003e Adds selectable static colors and dynamic illumination effects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRF Remote Control:\u003c\/strong\u003e Adjusts lighting color, mode, brightness, speed, and standby.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Resistant White Grilles:\u003c\/strong\u003e Helps the visible speaker surfaces withstand sun exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinkable Lighting System:\u003c\/strong\u003e Synchronizes illumination across up to six speaker pairs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-1673MRWL uses a PP mica woofer cone, rubber surround, ABS resin-molded basket, rubber frame cushion, PEI balanced-dome tweeter, and white UV-resistant grille. The speaker pair is built around a 6.5-inch coaxial format, placing the tweeter with the woofer for a compact installation. Its installed dimensions include a 5-11\/16-inch cutout requirement and 2-9\/16-inch mounting depth.\u003c\/p\u003e\u003cp\u003eUse separate speaker wiring for each channel and match the pair with a compatible 4-ohm audio system. Speaker wire is not included; Kenwood recommends 12- to 22-AWG speaker cable terminated with female spade connectors. The LED controller requires 12V DC power and ground; when wired directly to a battery, install a 3A fuse within 90 mm (3-9\/16 inches) of the battery, and use the supplied link cable and heat-shrink tubes to connect and protect the lighting system.\u003c\/p\u003e","brand":"KENWOOD","offers":[{"title":"Default Title","offer_id":47970422390947,"sku":"KFC-1673MRWL","price":90.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61UW_fhABgL_bdce9a4c-d01a-4ce7-b4fe-ae518d7e97fb.jpg?v=1786153741"},{"product_id":"mb-quart-np1-116","title":"MB Quart NP1-116 6.5\" Waterproof Marine Speakers","description":"\u003cp\u003eThe MB Quart NP1-116 Nautic Premium is a pair of 6.5-inch coaxial speakers designed for marine, powersports, RV, and other outdoor audio installations. They provide a weather-resistant replacement or upgrade for factory speakers exposed to water, dirt, sunlight, and changing temperatures. The pair includes interchangeable grille options for a coordinated installation appearance.\u003c\/p\u003e\u003cp\u003eThese speakers are suited to boat owners, off-road vehicle builders, and RV users who need full-range sound from a conventional 6.5-inch mounting location. Their 4-ohm impedance allows them to be connected to compatible marine source units or external amplifiers. Confirm the available mounting clearance and cutout size before installation.\u003c\/p\u003e\u003cp\u003eThe NP1-116 uses a 1-inch titanium dome tweeter to reproduce high-frequency detail, paired with an injection-molded composite polypropylene woofer cone for midrange and bass output. Its published frequency response is 30 Hz to 22 kHz, with 92 dB sensitivity. Rated power handling is 60 watts RMS and 120 watts peak per speaker.\u003c\/p\u003e\u003cp\u003eMarine-focused construction includes an IPX68-rated LIFE SHIELD protection system, UV-resistant ASA and fiberglass composite frames, molded polymer sealing gaskets, and corrosion-resistant gold-plated connectors. Co-molded Santoprene surrounds and an aramid-fiber composite spider support cone control in outdoor conditions. Front and rear venting is used to circulate air around the voice coil.\u003c\/p\u003e\u003cp\u003eUse the NP1-116 as a full-range speaker pair in a boat cabin, helm area, RV, side-by-side, or similar panel-mount installation. They can operate from a compatible receiver or from amplifier channels matched appropriately to their 4-ohm load and 60-watt RMS rating. For larger systems, add additional matched full-range speakers or a marine-rated subwoofer and amplifier as needed.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPX68 Protection:\u003c\/strong\u003e Designed for resistance to water, dirt, and outdoor exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Coaxial Format:\u003c\/strong\u003e Combines woofer and tweeter in one panel-mount speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTitanium Dome Tweeter:\u003c\/strong\u003e Provides detailed high-frequency reproduction from a 1-inch dome.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite Polypropylene Cone:\u003c\/strong\u003e Helps limit cone flex for controlled full-range playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60-Watt RMS Rating:\u003c\/strong\u003e Matches compatible receiver or amplifier channels at 4 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree Grille Colors:\u003c\/strong\u003e Includes Kaimu Black, Miami Silver, and Bahama White grilles.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe NP1-116 uses a UV-resistant ASA and fiberglass composite frame, injection-molded composite polypropylene cone, co-molded Santoprene surround, and molded polymer sealing gasket. Its tweeter uses a titanium dome with a waterproof-coated silk surround and a high-energy N38H neodymium motor. The midwoofer uses a high-energy ferrite magnet, while the terminals are 10-karat gold plated for corrosion resistance.\u003c\/p\u003e\u003cp\u003ePlan for a 5.6-inch mounting cutout and approximately 3.05 inches of chassis depth, then verify clearance behind the mounting surface before cutting or fastening. Connect speaker positive and negative leads to the corresponding terminals, route wiring away from sharp edges and heat sources, and select the desired grille before securing it with the supplied mounting hardware. The installation guide recommends professional installation when panel removal, new cutouts, or wiring routes are uncertain.\u003c\/p\u003e","brand":"MB QUART","offers":[{"title":"Default Title","offer_id":47970425143459,"sku":"NP1-116","price":35.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61A28eGOrbL.jpg?v=1786153809"},{"product_id":"memphis-mmj824","title":"Memphis Audio MMJ824 8\" Marine Subwoofer","description":"\u003cp\u003eThe Memphis Audio MMJ824 is an 8-inch marine-grade subwoofer designed to add low-frequency output to boat, powersports, and side-by-side audio systems. It provides a dedicated bass driver for systems where full-range speakers alone cannot reproduce the lower end with enough authority. Its selectable 2-ohm or 4-ohm impedance capability helps it fit a wider range of amplifier and wiring plans.\u003c\/p\u003e\u003cp\u003eThis model is intended for listeners building a compact marine or off-road system that needs substantial bass without moving to a larger subwoofer size. With 600 watts RMS power handling, it is suited to a properly matched external subwoofer amplifier. The 8-inch format can be useful where available mounting space is limited.\u003c\/p\u003e\u003cp\u003eThe MMJ824 uses a 2-inch voice coil, a 105-ounce magnet, and a die-cast aluminum basket to support high-power bass reproduction. Its published Thiele\/Small data includes a 40 Hz resonant frequency and a 0.59-inch linear Xmax rating. These characteristics support use in either sealed or vented enclosures built to the manufacturer's recommendations.\u003c\/p\u003e\u003cp\u003eMarine-focused materials include a UV-resistant polypropylene cone, plastic dust cap, rubber surround, gold-plated terminals, and a black stainless-steel grille. An RGB LED back-lit Memphis emblem adds visible accent lighting at the center of the subwoofer. The product is designed for marine and powersports environments, but it should still be installed and wired according to applicable equipment instructions.\u003c\/p\u003e\u003cp\u003eThe MMJ824 can be used as a single-subwoofer upgrade or paired with a second matching unit in a larger system. Memphis publishes enclosure recommendations for both single and dual sealed or vented configurations. Pair it with an amplifier that is stable at the selected impedance and whose RMS output is appropriate for the subwoofer's 600-watt RMS rating.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFLEX Selectable Impedance:\u003c\/strong\u003e Supports 2-ohm or 4-ohm system configuration flexibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600W RMS Handling:\u003c\/strong\u003e Accommodates a properly matched dedicated subwoofer amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB Back-Lit Emblem:\u003c\/strong\u003e Adds illuminated Memphis branding to the installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Resistant Polypropylene Cone:\u003c\/strong\u003e Uses a cone material suited to exposed installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDie-Cast Aluminum Basket:\u003c\/strong\u003e Provides a rigid foundation for the moving assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Stainless-Steel Grille:\u003c\/strong\u003e Adds front-side protection with a marine-oriented finish.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MMJ824 combines a UV-resistant polypropylene cone, plastic dust cap, rubber surround, die-cast aluminum basket, gold-plated terminals, and black stainless-steel grille. Its 2-inch voice coil and 105-ounce magnet are part of a high-power motor structure. The RGB back-lit emblem provides a visual feature without changing the subwoofer's primary bass role.\u003c\/p\u003e\u003cp\u003eConfirm the available installation space before cutting, using the manufacturer's listed 5.75-inch mounting depth and 7.35-inch cutout diameter. Select the desired 2-ohm or 4-ohm configuration to match an amplifier that is stable at that load, then use an appropriately sized sealed or vented enclosure. For a single subwoofer, Memphis recommends 0.65 cubic feet sealed or 1.1 cubic feet vented, with the vented design tuned to 40 Hz.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":47970427306147,"sku":"MMJ824","price":149.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/81p2b5v7c7L.jpg?v=1786153855"},{"product_id":"memphis-canamdef10se","title":"Memphis CANAMDEF10SE 10\" Powered Can-Am Defender Subwoofer","description":"\u003cp\u003eThe Memphis CANAMDEF10SE is a direct-fit powered 10-inch subwoofer system made for compatible 2018 and newer Can-Am Defender vehicles. It adds dedicated low-frequency output while using an under-seat factory-style mounting location. The integrated amplifier and sealed enclosure simplify adding bass without selecting a separate subwoofer box and amplifier.\u003c\/p\u003e\u003cp\u003eThis system is intended for Can-Am Defender owners who want a compact bass upgrade while preserving usable cabin space. On 2-seat models, it mounts beneath the passenger seat. On 4-seat models, it can mount beneath the front passenger seat or either rear seat location.\u003c\/p\u003e\u003cp\u003eA built-in 350-watt RMS amplifier drives the included 10-inch woofer, with a 500-watt peak power rating. Its specified frequency range is 28 Hz to 120 Hz, covering the low-bass region that smaller speakers do not reproduce as fully. A wired bass knob is included for convenient output adjustment while riding.\u003c\/p\u003e\u003cp\u003eThe enclosure is rotomolded from high-density polyethylene and sealed for all-weather conditions. A mesh grille helps protect the RGB back-lit woofer in its under-seat location. The included sealed harness is designed for the powersports installation environment.\u003c\/p\u003e\u003cp\u003eThe CANAMDEF10SE can be used as the bass section of a broader Defender audio upgrade with compatible source and speaker equipment. Four-seat Defender configurations can accommodate up to three of these subwoofer systems in the specified seat locations. Confirm vehicle configuration before purchase, as this model does not fit 2026 HD11 Defender models.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-Fit Defender Design:\u003c\/strong\u003e Built for specified Can-Am Defender factory-style under-seat locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Powered Woofer:\u003c\/strong\u003e Combines a full-size subwoofer with an integrated amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e350W RMS Amplification:\u003c\/strong\u003e Provides dedicated continuous power for low-frequency reinforcement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotomolded HDPE Enclosure:\u003c\/strong\u003e Uses durable high-density polyethylene construction for powersports use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB Back-Lit Woofer:\u003c\/strong\u003e Adds illuminated styling behind the included mesh grille.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Bass Knob:\u003c\/strong\u003e Lets the rider adjust subwoofer output from the control location.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CANAMDEF10SE uses a sealed, rotomolded HDPE enclosure rather than a conventional carpeted vehicle box. Its mesh grille covers the woofer, while RGB backlighting is integrated into the 10-inch driver. The enclosure is specified for all-weather conditions and includes a sealed harness.\u003c\/p\u003e\u003cp\u003eFor 2-seat Defender models, mount the enclosure under the passenger seat. For 4-seat models, use the front passenger or rear-seat locations; up to three units may be installed in the specified locations. Mounting hardware, the sealed harness, and bass knob are included, but verify the vehicle is not a 2026 HD11 model before installation.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":47970427666595,"sku":"CANAMDEF10SE","price":350.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/81JSQ9RYMHL.jpg?v=1786153874"},{"product_id":"memphis-canamdef65re","title":"Memphis CANAMDEF65RE 6.5\" Can-Am Defender Rear Speaker Pods","description":"\u003cp\u003eThe Memphis CANAMDEF65RE is a pair of direct-fit rear roof speaker pods engineered for compatible 2018-and-newer Can-Am Defender vehicles with a factory roof. It provides an OEM-location audio upgrade without requiring custom fabrication. The loaded pods place 6.5-inch coaxial speakers beneath the rear roof for a clean, integrated installation.\u003c\/p\u003e\u003cp\u003eThese pods are intended for Defender owners who want to add rear sound coverage while retaining a vehicle-specific mounting approach. Each pod uses a coaxial speaker with a tweeter bridge to reproduce full-range music from a compact enclosure. The system is rated for 75 watts RMS and 150 watts peak power.\u003c\/p\u003e\u003cp\u003eMemphis specifies a 92 dB sensitivity rating for the CANAMDEF65RE, supporting efficient output when matched with suitable amplification. The rotomolded enclosures are tuned for output and use a fully sealed design for water resistance. Marine-grade components help suit the product to outdoor powersports use.\u003c\/p\u003e\u003cp\u003eRGB illumination is built into the speaker cone, and an RGB speaker accent ring is included for added visual integration. This lighting feature can complement an existing RGB-equipped powersports audio system. The pods are designed as a rear-speaker addition rather than a complete source unit or amplifier package.\u003c\/p\u003e\u003cp\u003eThe CANAMDEF65RE fits Can-Am Defender models from 2018 onward when equipped with a compatible factory roof system. It is designed for Sport Roof, Deluxe Sport Roof, and Hard Cab Enclosure applications. For a fuller system build, pair the rear pods with an appropriate audio source, amplification, and front speakers as needed.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-Fit Rear Pods:\u003c\/strong\u003e Mount in compatible Can-Am Defender factory-roof locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Coaxial Speakers:\u003c\/strong\u003e Provide full-range rear audio with tweeter bridges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W RMS Rating:\u003c\/strong\u003e Supports amplifier matching for sustained music playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully Sealed Enclosures:\u003c\/strong\u003e Help provide water resistance for powersports use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB Cone Lighting:\u003c\/strong\u003e Illuminates the speakers and included accent rings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug-and-Play Harness:\u003c\/strong\u003e Simplifies connection in the intended vehicle application.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CANAMDEF65RE uses lightweight, durable rotomolded rear roof enclosures with marine-grade components. Its fully sealed construction is designed for water resistance, while the integrated RGB-lit speaker cones and included RGB rings add a coordinated appearance. The package is supplied as a pair of rear speaker pods.\u003c\/p\u003e\u003cp\u003eInstallation is intended for 2018-and-newer Can-Am Defender models with a factory roof, using direct-fit OEM mounting locations. Mounting hardware and a plug-and-play harness are included; confirm that the vehicle has a Sport Roof, Deluxe Sport Roof, or Hard Cab Enclosure before purchase. These pods do not fit XT or Mossy Oak Hunting models.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":47970427699363,"sku":"CANAMDEF65RE","price":89.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71PLtCPcQlL.jpg?v=1786153876"},{"product_id":"memphis-canamx310se","title":"Memphis CANAMX310SE Maverick X3 10\" Powered Subwoofer","description":"\u003cp\u003eThe Memphis CANAMX310SE is a vehicle-specific powered 10-inch subwoofer enclosure for Can-Am Maverick X3 models. It combines a Memphis shallow subwoofer, an internal amplifier, and a molded enclosure in one integrated bass upgrade. The system is designed to add low-frequency output without requiring a separate subwoofer box and amplifier installation.\u003c\/p\u003e\u003cp\u003eThis enclosure is intended for Can-Am Maverick X3 models from 2017 and newer. Its direct-fit design is made for riders who want an audio upgrade that follows the vehicle's factory layout rather than a universal custom installation. The enclosure mounts beneath either the driver or passenger seat.\u003c\/p\u003e\u003cp\u003eThe built-in amplifier is rated for 200 watts RMS and 400 watts peak power. That power is matched to the included 10-inch shallow subwoofer for dedicated bass reinforcement in a powersports audio system. An included remote bass knob provides convenient level adjustment after the system gain has been set.\u003c\/p\u003e\u003cp\u003eFor off-road use, the CANAMX310SE uses an HDPE rotational-molded enclosure and sealed connectors. The assembly is IP66 rated to support use around dust and water exposure associated with trail riding. Its integrated marine-grade amplifier keeps the powered-subwoofer design compact and purpose-built.\u003c\/p\u003e\u003cp\u003eA plug-and-play wire harness and vehicle-specific mounting hardware are included to support installation in the intended Maverick X3 application. RCA inputs allow connection to a compatible audio source, while dedicated power, ground, and turn-on wiring connect the enclosure to the vehicle. It can serve as a focused bass addition to an existing or expanding Maverick X3 audio system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Shallow Subwoofer:\u003c\/strong\u003e Provides dedicated bass output in a compact direct-fit enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Amplifier:\u003c\/strong\u003e Delivers 200 watts RMS and 400 watts peak power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP66 Rating:\u003c\/strong\u003e Supports use in dusty and wet powersports environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDPE Enclosure:\u003c\/strong\u003e Rotational-molded construction is designed for durable vehicle use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Bass Knob:\u003c\/strong\u003e Lets you trim bass level from a convenient location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug-And-Play Harness:\u003c\/strong\u003e Simplifies wiring for the intended Maverick X3 application.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CANAMX310SE uses a high-density polyethylene rotational-molded enclosure with a black HDPE composite finish. Its sealed connectors and IP66-rated construction are designed for the vibration, moisture, and debris encountered in powersports use. The enclosure contains the 10-inch Memphis shallow subwoofer and internal marine-grade amplifier.\u003c\/p\u003e\u003cp\u003eThe enclosure is designed to install beneath either front seat of a compatible 2017-and-newer Can-Am Maverick X3. Rear metal brackets, front washers and bolts, a plug-and-play harness, and mounting hardware are included for the vehicle-specific installation. Connect power directly to the battery through a 30-amp fuse, connect ground to battery negative, connect the blue lead to ACC\/key turn-on, and feed audio through the RCA inputs.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":47970427732131,"sku":"CANAMX310SE","price":325.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/81VrH1hMV1L.jpg?v=1786153878"},{"product_id":"memphis-canamx365fe","title":"Memphis CANAMX365FE 6.5\" Can-Am X3 Front Speaker Pods","description":"\u003cp\u003eThe Memphis CANAMX365FE is a pair of direct-fit 6.5-inch front speaker pods designed for 2017 and newer Can-Am Maverick X3 models. It provides a vehicle-specific way to add front audio without building custom enclosures. The pods mount in OEM-oriented locations and are made for UTV owners who want an integrated speaker upgrade.\u003c\/p\u003e\u003cp\u003eEach pod set is rated for 75 watts RMS, 150 watts peak power, and 90 dB sensitivity. These specifications support clear, useful output in an open-cabin powersports environment when matched with an appropriate audio system. The integrated full-range speaker format keeps the upgrade focused on front-stage sound.\u003c\/p\u003e\u003cp\u003eRGB lighting is built into the speaker area, Memphis logo, and downward-facing floor lighting. This lets the pods add visible accent lighting along with audio capability. Lighting integration is built into the enclosure design rather than requiring separate light pods.\u003c\/p\u003e\u003cp\u003eThe CANAMX365FE uses injection-molded polypropylene front enclosures with sealed connectors. The pods carry an IPX6 rating for water exposure and are built with marine-grade components for powersports use. This construction is intended for the vibration, dust, and weather conditions associated with off-road riding.\u003c\/p\u003e\u003cp\u003eThese front pods can serve as the starting point for a Maverick X3 audio system or as part of a larger front-and-rear speaker setup. Vehicle-specific mounting hardware is included, and the design is compatible with plug-and-play harnessing. A separate source unit, amplifier, and any required vehicle wiring should be selected to suit the intended system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-Fit Maverick X3 Design:\u003c\/strong\u003e Made for 2017 and newer Can-Am Maverick X3 models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Front Speakers:\u003c\/strong\u003e Adds a pair of full-range front speaker pods.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75-Watt RMS Rating:\u003c\/strong\u003e Supports amplifier matching for dependable everyday playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPX6-Rated Pods:\u003c\/strong\u003e Helps suit the enclosures to exposed powersports conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated RGB Lighting:\u003c\/strong\u003e Illuminates the speakers, logo, and down-lighting area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Connections:\u003c\/strong\u003e Uses sealed connectors and plug-and-play-harness compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe front enclosures are injection molded from polypropylene and use a vehicle-specific form for the Can-Am Maverick X3. Their sealed connectors and IPX6-rated pod construction are intended for outdoor powersports use. Integrated RGB speaker, logo, and floor lighting is incorporated into the pod assembly.\u003c\/p\u003e\u003cp\u003eInstallation uses the supplied templates, brackets, screws, and washers to mount the pods in the vehicle-specific front locations. The installation procedure requires removal of exterior panels and drilling mounting and speaker-wire holes as directed by the supplied templates. For a complete system, connect the pods through compatible wiring to an appropriately configured audio source and amplification setup.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":47970427764899,"sku":"CANAMX365FE","price":165.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61YYwAMEWmL.jpg?v=1786153879"},{"product_id":"memphis-mb1024","title":"Memphis MB1024 10\" Selectable-Impedance Subwoofer","description":"\u003cp\u003eThe Memphis MB1024 is a 10-inch car audio subwoofer designed for systems that need meaningful low-frequency output while retaining installation flexibility. Its selectable impedance design allows the same subwoofer to be configured for either 2-ohm or 4-ohm operation. This makes it a practical choice for replacing an existing woofer or planning a system around a compatible mono amplifier.\u003c\/p\u003e\u003cp\u003eWith a 500-watt RMS power rating and 1,000-watt peak rating, the MB1024 is intended for a properly matched amplified subwoofer system. It is suited to listeners who want fuller bass response than factory speakers can provide. The 10-inch format can fit where larger subwoofers may not be practical, provided enclosure and mounting-clearance requirements are met.\u003c\/p\u003e\u003cp\u003eMemphis FLEX selectable impedance technology is the defining feature of this model. It gives installers the option to configure the subwoofer for 2-ohm or 4-ohm use, helping align the woofer with an amplifier's stable operating load. Sensitivity is rated at 84.6 dB in the 2-ohm configuration and 85.3 dB in the 4-ohm configuration.\u003c\/p\u003e\u003cp\u003eThe MB1024 uses an ultra-light aluminum voice coil, a 2-inch four-layer triple voice coil design, and DVVC direct vented voice coil cooling. These elements support power handling and help manage heat during operation. Woven tinsel leads and a polypropylene dust cap complete the working assembly.\u003c\/p\u003e\u003cp\u003eA double-stitched V-Groove folded surround is used to support increased excursion while preserving effective cone area. Memphis provides sealed and vented enclosure recommendations for single- and dual-subwoofer applications. Pair the MB1024 with a suitable enclosure, correctly configured amplifier, and appropriately sized wiring for a focused bass upgrade.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFLEX Selectable Impedance:\u003c\/strong\u003e Choose 2-ohm or 4-ohm operation to suit a compatible amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W RMS Handling:\u003c\/strong\u003e Supports properly matched amplified bass systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Driver:\u003c\/strong\u003e Provides a compact format for vehicle subwoofer installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Voice Coil:\u003c\/strong\u003e Supports sensitivity and output with low moving mass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVVC Cooling:\u003c\/strong\u003e Direct venting helps manage voice-coil heat during operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFolded V-Groove Surround:\u003c\/strong\u003e Supports excursion while retaining effective surface area.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MB1024 combines a polypropylene dust cap, woven tinsel leads, ultra-light aluminum voice coil, and double-stitched V-Groove folded surround. Its 2-inch, four-layer triple voice coil and 60-ounce magnet are matched with DVVC direct vented voice coil cooling. The subwoofer has a 10.16-inch outside frame diameter, a 9.17-inch cutout requirement, and a 5.14-inch mounting depth.\u003c\/p\u003e\u003cp\u003eConfirm that the enclosure has at least the required cutout diameter and mounting depth before installation. Memphis recommends a 1.0-cubic-foot sealed enclosure for one subwoofer or a 1.5-cubic-foot gross vented enclosure tuned to 38 Hz; dual-subwoofer recommendations are also available. Configure the selectable impedance setting to match an amplifier that is designed to operate safely at the chosen load.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":47970428158115,"sku":"MB1024","price":100.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/MB10-7_1000.jpg?v=1786153897"},{"product_id":"memphis-mm1024","title":"Memphis MM1024 10\" Marine Subwoofer with RGB LEDs","description":"\u003cp\u003eThe Memphis MM1024 is a 10-inch marine-grade subwoofer designed to add low-frequency output to boat and powersports audio systems. It is intended for installations exposed to sun, moisture, vibration, and changing outdoor conditions. Integrated RGB LED lighting in the cone and grille adds illumination for nighttime use.\u003c\/p\u003e\u003cp\u003eThis passive subwoofer is suited to listeners who want a dedicated bass driver rather than relying on full-range speakers for low frequencies. Its selectable 2-ohm or 4-ohm impedance gives an installer flexibility when matching an amplifier and planning a future system expansion. The MM1024 is rated for 300 watts RMS and 600 watts peak power.\u003c\/p\u003e\u003cp\u003eMemphis FLEX selectable impedance technology allows the subwoofer to be configured for either a 2-ohm or 4-ohm load. This can simplify amplifier matching without replacing the subwoofer when a system changes. Confirm the amplifier's stable impedance rating before wiring the subwoofer.\u003c\/p\u003e\u003cp\u003eThe MM1024 uses a UV-resistant polypropylene cone, a high-temperature ABS plastic basket, and gold-plated terminals. These materials are selected for marine and powersports environments where corrosion resistance and durability are important. A UV-resistant high-impact gray grille is included to protect the front of the subwoofer.\u003c\/p\u003e\u003cp\u003eFor a single-sub installation, the manufacturer lists sealed and vented enclosure recommendations. The 10-inch format can fit purpose-built marine enclosures, custom powersports panels, and other installations with adequate mounting clearance. Optional black and white replacement grilles are available separately for alternate system styling.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFLEX Selectable Impedance:\u003c\/strong\u003e Choose 2-ohm or 4-ohm operation to suit the amplifier and wiring plan.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated RGB Lighting:\u003c\/strong\u003e Backlit cone and grille lighting add visible accent illumination after dark.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W RMS Power Handling:\u003c\/strong\u003e Supports a properly matched amplifier rated for continuous subwoofer output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Resistant Polypropylene Cone:\u003c\/strong\u003e Helps the cone withstand prolonged outdoor exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Temperature ABS Basket:\u003c\/strong\u003e Provides a corrosion-resistant structural frame for marine-oriented installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Gray Grille:\u003c\/strong\u003e Supplies front protection with a UV-resistant high-impact design.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MM1024 combines a translucent polypropylene cone with an ABS plastic basket and a gunmetal-gray protective grille. Its gold-plated terminals are intended to support reliable electrical connections in marine and powersports systems. The cone and grille incorporate RGB lighting, while optional white and black grilles are offered separately.\u003c\/p\u003e\u003cp\u003eVerify the 9.37-inch cutout requirement, 4.567-inch mounting depth, and enclosure volume before cutting a mounting surface. For a single subwoofer, Memphis lists a 0.8-cubic-foot sealed enclosure or a 1.4-cubic-foot vented enclosure tuned to 38 Hz. Set the selectable impedance to match a compatible amplifier, and use the included grille where front-side driver protection is needed.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":47970432811171,"sku":"MM1024","price":105.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71YLgft-EPL.jpg?v=1786153960"},{"product_id":"memphis-mm105tw","title":"Memphis MM105TW 10\" ATAC Tower Speakers, White Pair","description":"\u003cp\u003eThe Memphis MM105TW is a pair of 10-inch marine tower speakers designed for boats and powersports systems that need sound projected beyond the seating area. Their clamp-mounted enclosures place the speakers high on a tower, helping direct music toward riders, swimmers, or listeners behind the boat. The white finish is suited to installations where a bright, clean appearance is preferred.\u003c\/p\u003e\u003cp\u003eEach MM105TW is rated for 300 watts RMS and 600 watts peak power at 4 ohms. The 10-inch format is intended to provide substantial midbass presence while the four-tweeter line array handles upper-frequency detail. This makes the pair a practical fit for amplified marine audio systems built for open-air listening.\u003c\/p\u003e\u003cp\u003eMemphis uses Advanced Tower Array Construction, or ATAC, with a curved tweeter array mounted across the front of the enclosure. The design keeps the woofer fully sealed while using a four-tweeter array for broad sound dispersion. It is engineered as an alternative to tower speakers that place a compression horn through the woofer area.\u003c\/p\u003e\u003cp\u003eMarine-focused construction includes an ASA plastic enclosure, sealed electrical connections, stainless steel grille components, and an IP66 rating. The speaker design is also listed as UV tested for up to 1,500 hours. RGB LED illumination is integrated across multiple visible areas for coordinated system lighting.\u003c\/p\u003e\u003cp\u003eFor installation flexibility, the included cast stainless steel clamp brackets swivel through 360 degrees so the speakers can be aimed after mounting. The clamps are specified for tower bars from 1.875 to 3 inches in diameter in Memphis' current catalog. An optional MMSMTBK surface-mount bracket is available separately for flat-surface applications.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eATAC Tweeter Array:\u003c\/strong\u003e Curved four-tweeter array supports broad sound dispersion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W RMS Handling:\u003c\/strong\u003e Built for use with a suitably matched external amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP66-Rated Construction:\u003c\/strong\u003e Helps protect the enclosure against demanding marine exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully Sealed Design:\u003c\/strong\u003e Limits water and debris entry into the speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e360-Degree Swivel Brackets:\u003c\/strong\u003e Lets installers aim the speakers toward the listening area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated RGB Lighting:\u003c\/strong\u003e Adds configurable visual accent lighting around the speakers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MM105TW uses a Brilliant White ASA plastic enclosure with a stainless steel array grille and corrosion-resistant stainless steel hardware. Its glass-fiber cone uses a Santoprene surround, while the front grille and logo badge can be rotated for a clean final orientation. Sealed electrical connections and the IP66-rated construction support use in marine and saltwater-oriented installations.\u003c\/p\u003e\u003cp\u003eMount the included swivel clamp brackets to compatible 1.875- to 3-inch tower tubing, then aim and secure the speakers before final wiring. Use an external amplifier compatible with the speakers' 4-ohm impedance and power rating, and plan separate wiring for the audio and RGB lighting functions. For flat mounting locations, the optional Memphis MMSMTBK surface-mount bracket is sold separately.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":47970432876707,"sku":"MM105TW","price":825.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/81Nud1xzGCL.jpg?v=1786153964"},{"product_id":"memphis-mm1224","title":"Memphis MM1224 12\" Marine RGB Subwoofer","description":"\u003cp\u003eThe Memphis MM1224 is a 12-inch marine-grade subwoofer designed to add low-frequency output to boat, powersports, and outdoor audio systems. Its weather-resistant materials help it suit installations exposed to sun and changing conditions. Integrated RGB LED lighting adds illumination through the translucent cone and included grille.\u003c\/p\u003e\u003cp\u003eThis subwoofer is intended for listeners who want fuller bass in a marine or powersports system without committing to a fixed nominal impedance. Memphis FLEX selectable-impedance technology lets the installer configure the subwoofer for either 2-ohm or 4-ohm operation. That flexibility can make future system changes or adding subwoofers easier when amplifier requirements change.\u003c\/p\u003e\u003cp\u003eThe MM1224 is rated for 300 watts RMS and 600 watts peak power. Its 12-inch cone area and 2-inch voice coil are engineered for dedicated bass reproduction rather than full-range playback. With a resonant frequency of 36 Hz, it is suited to systems that need substantial low-end support.\u003c\/p\u003e\u003cp\u003eA UV-resistant polypropylene cone, rubber surround, and high-temperature ABS basket support use in marine-oriented environments. Gold-plated terminals provide corrosion-conscious speaker connections, while the included high-impact gray grille protects the front of the driver. The basket and grille are designed to complement exposed mounting locations.\u003c\/p\u003e\u003cp\u003eFor system building, the MM1224 can be used in a sealed or vented enclosure according to Memphis enclosure recommendations. A single sealed enclosure recommendation is 1.25 cubic feet, while a single vented recommendation is 2.4 cubic feet tuned to 37 Hz. Select an amplifier that is stable at the chosen 2-ohm or 4-ohm setting and matched appropriately to the subwoofer's RMS rating.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFLEX Selectable Impedance:\u003c\/strong\u003e Configure the subwoofer for 2-ohm or 4-ohm operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated RGB Lighting:\u003c\/strong\u003e Built-in LEDs illuminate the translucent cone and included grille.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W RMS Handling:\u003c\/strong\u003e Supports amplifier matching up to 300 watts RMS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Resistant Cone:\u003c\/strong\u003e Polypropylene cone is designed for sun-exposed installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eABS Basket:\u003c\/strong\u003e High-temperature, corrosion-resistant plastic basket supports marine use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGray Protective Grille:\u003c\/strong\u003e Included high-impact grille helps protect the woofer face.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MM1224 uses a translucent UV-resistant polypropylene cone with a rubber surround, a 48-ounce magnet, and a 2-inch voice coil. Its high-temperature ABS basket is corrosion resistant, and the included gunmetal-gray grille is made from UV-resistant, high-impact plastic. Optional black and white grilles are available separately.\u003c\/p\u003e\u003cp\u003eAllow for a 4.95-inch mounting depth and an 11.2-inch cutout diameter when planning the installation. Wire the subwoofer according to the selected 2-ohm or 4-ohm configuration, then pair it with a compatible amplifier and enclosure. For enclosure builds, Memphis lists separate sealed and vented volume recommendations for single- and dual-subwoofer systems.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":47970432909475,"sku":"MM1224","price":120.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/716o2B1qd3L.jpg?v=1786153966"},{"product_id":"memphis-mm84tb","title":"Memphis MM84TB 8\" ATAC Tower Speakers, Black","description":"\u003cp\u003eThe Memphis MM84TB is a pair of 8-inch marine and powersports tower speakers built for installations where music needs to project beyond the vehicle or boat. Their sealed, weather-resistant construction makes them suited to wake towers, bar-mounted powersports applications, and other exposed locations. The black finish provides a coordinated appearance for dark tower and bar setups.\u003c\/p\u003e\u003cp\u003eEach MM84TB speaker uses a 4-ohm design with 200 watts RMS and 400 watts peak power handling. This gives system builders a substantial power target when selecting compatible amplification. The 8-inch glass-fiber woofer and Santoprene surround are designed to provide strong midbass while handling outdoor use.\u003c\/p\u003e\u003cp\u003eMemphis Advanced Tower Array Construction, or ATAC, places a curved three-tweeter array across the front of the speaker rather than using a center-mounted compression horn. This arrangement allows the woofer to remain fully sealed and preserves its usable cone area. The curved array is intended to provide broad sound dispersion for listeners behind a boat or vehicle.\u003c\/p\u003e\u003cp\u003eRGB LED illumination is integrated into the cone, tweeter array, side ring, rear ring, and rotating rear badge. The lighting gives the speakers a coordinated appearance at night while the rotating front grille and badge help keep branding aligned after installation. A stainless steel array grille protects the front of each enclosure.\u003c\/p\u003e\u003cp\u003eThe MM84TB is supplied as a matched black pair with cast stainless steel clamp brackets for compatible round bars. The EZ swivel mounting design allows each speaker to be aimed after it is mounted. For flat-surface installations, Memphis offers the separate MMSMTBK surface-mount bracket pair.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eATAC Three-Tweeter Array:\u003c\/strong\u003e Curved front array supports broad sound coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200W RMS Handling:\u003c\/strong\u003e Supports amplifier matching for demanding outdoor systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP66 Protection:\u003c\/strong\u003e Helps resist water and dust exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB LED Lighting:\u003c\/strong\u003e Illuminates the cone, array, rings, and badge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEZ 360° Swivel Mount:\u003c\/strong\u003e Lets installers direct each speaker after mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass-Fiber Woofer:\u003c\/strong\u003e Paired with a Santoprene surround for durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MM84TB uses an ASA plastic enclosure, sealed electrical connections, and corrosion-resistant stainless steel hardware for marine and powersports environments. Its stainless steel array grille, glass-fiber cone, and Santoprene surround complement the sealed speaker design. Memphis rates the enclosure IP66 and lists UV testing up to 1,500 hours.\u003c\/p\u003e\u003cp\u003eUse the included cast stainless steel clamp brackets on round bars measuring 1.875 to 3 inches in diameter, then set the speaker direction with the 360-degree swivel adjustment. Allow clearance for the 10.28-inch height, 9.05-inch width, and 11.92-inch depth before final placement. Match the pair with suitable 4-ohm-capable amplification, speaker wiring, and an RGB lighting control solution appropriate to the overall system.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":47970432975011,"sku":"MM84TB","price":686.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/81usqpQXnrL.jpg?v=1786153970"},{"product_id":"memphis-mm84tw","title":"Memphis MM84TW 8\" White ATAC Tower Speakers","description":"\u003cp\u003eThe Memphis MM84TW is a pair of 8-inch white tower speakers designed for marine and powersports audio systems. It provides an external, bar-mounted speaker solution for boats and other applications where music needs to project beyond the seating area. Each pair combines full-size woofers with an integrated high-frequency array in a sealed enclosure.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for owners building or upgrading a wake-tower, marine, or powersports sound system. Their 4-ohm design and 200-watt RMS, 400-watt peak power handling support use with a properly matched external amplifier. The 8-inch format is suited to systems seeking mid-bass presence along with projected high-frequency detail.\u003c\/p\u003e\u003cp\u003eMemphis ATAC, or Advanced Tower Array Construction, places three tweeters on a curved bridge across the front of each speaker. This arrangement avoids a center-mounted compression horn and leaves more of the woofer surface unobstructed. The curved array is designed to broaden high-frequency dispersion for listeners positioned behind the vehicle or boat.\u003c\/p\u003e\u003cp\u003eThe MM84TW uses a fully sealed ASA plastic enclosure with sealed electrical connections and an IP66 rating. Its stainless steel array grille and corrosion-resistant stainless steel hardware support use in exposed marine and powersports environments. RGB illumination is integrated into the cone, tweeter array, side and rear rings, and rear badge for coordinated lighting within a compatible RGB setup.\u003c\/p\u003e\u003cp\u003eFor installation flexibility, the included cast stainless steel clamp mounts fit 1.875- to 3-inch bars and provide 360-degree swivel adjustment. The logo badge and front grille can be rotated to maintain a clean appearance after aiming the speakers. Optional MMSMTBK surface-mount brackets are available separately for flat-surface mounting applications.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eATAC Tweeter Array:\u003c\/strong\u003e A curved three-tweeter bridge helps distribute high frequencies across a wider listening area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Tower Format:\u003c\/strong\u003e Full-size tower speakers add projected sound and mid-bass capability to marine or powersports systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200W RMS Handling:\u003c\/strong\u003e Supports amplifier-based systems with substantial continuous power capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP66 Sealed Construction:\u003c\/strong\u003e The sealed enclosure and connections help protect the speaker in exposed installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB LED Illumination:\u003c\/strong\u003e Lighting at the cone, array, side, rear, and badge adds visual customization.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEZ 360° Swivel Mounts:\u003c\/strong\u003e Clamp mounts let you aim the speakers while fitting common 1.875- to 3-inch bars.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MM84TW has a white ASA plastic enclosure, a stainless steel array grille, and corrosion-resistant stainless steel hardware. Its fully sealed speaker construction, sealed electrical connections, UV testing up to 1,500 hours, and IP66 rating are intended for outdoor marine and powersports use. The front grille and rear logo badge rotate for visual alignment at different mounting angles.\u003c\/p\u003e\u003cp\u003eMount the speakers to compatible 1.875- to 3-inch bars using the supplied swivel clamp hardware, then aim and secure them before final wiring. Use an external amplifier compatible with the speakers' 4-ohm impedance and power handling, and plan separate wiring and control components for the RGB lighting. For flat mounting surfaces, use the separately available MMSMTBK surface-mount bracket pair.\u003c\/p\u003e","brand":"MEMPHIS","offers":[{"title":"Default Title","offer_id":47970433007779,"sku":"MM84TW","price":700.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/81hEFt57P0L.jpg?v=1786153972"}],"url":"https:\/\/nsiexport.com\/collections\/marine-speaker.oembed?page=7","provider":"NSI Export","version":"1.0","type":"link"}