{"title":"Component Subwoofers","description":null,"products":[{"product_id":"audio360-ad1500us-1500w-10-inch-amplified-subwoofer-under-seat-adjustable-low-pass-filter-bass-boost-control-compact-design-perfect-for-car-audio-systems","title":"Audio360 AD1500US 10\" Powered Under-Seat Subwoofer","description":"\u003cp\u003eThe AUDIO360 AD1500US is a compact powered subwoofer system designed to add low-frequency output to vehicle audio systems without requiring a separate subwoofer enclosure and external amplifier. Its integrated 10-inch, 4-ohm woofer and built-in amplifier are housed in a shallow enclosure intended for under-seat or limited-space installations. It is a practical option for drivers who want more bass while preserving usable cargo and cabin space.\u003c\/p\u003e\u003cp\u003eRated for up to 1500 watts of peak power, the AD1500US is intended to provide added bass impact for factory and aftermarket sound systems. Its published frequency response is 55Hz to 20kHz, with a signal-to-noise ratio above 90dB and total harmonic distortion below 0.4%. These specifications support a clean, controlled addition of low-end reinforcement when the system is set up correctly.\u003c\/p\u003e\u003cp\u003eAn adjustable low-pass filter from 50Hz to 150Hz lets the subwoofer be matched to the frequency range handled by the vehicle's main speakers. This allows the installer to set the handoff point according to the speakers, source unit, and listening preference. A 20Hz subsonic filter is also specified to limit very low frequencies outside the intended operating range.\u003c\/p\u003e\u003cp\u003eThe AD1500US includes variable bass boost adjustment from 0 to +24dB for tailoring bass emphasis. High-level and low-level input options support integration with either factory speaker-output signals or aftermarket receiver preamp signals. Published input sensitivity is 0.9V for high-level input and 300mV for low-level input.\u003c\/p\u003e\u003cp\u003eAt 345 x 262 x 68mm, the enclosure is built for installations where conventional subwoofer boxes are impractical. The slim 68mm profile can suit many under-seat and shallow cargo-area locations, subject to vehicle clearance and safe mounting access. Integrated circuit protection and a 25A fuse are specified to help protect the powered subwoofer during operation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Powered Woofer:\u003c\/strong\u003e Combines a 10-inch 4-ohm woofer and built-in amplifier in one enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1500W Peak Rating:\u003c\/strong\u003e Provides a published maximum peak-power rating for added bass output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Low-Pass Filter:\u003c\/strong\u003e Offers 50Hz to 150Hz tuning for blending with full-range speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Bass Boost:\u003c\/strong\u003e Adjusts bass emphasis from 0 to +24dB.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Input Compatibility:\u003c\/strong\u003e Supports high-level and low-level source connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow Enclosure:\u003c\/strong\u003e Measures 68mm deep for space-conscious vehicle installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD1500US uses an all-in-one powered-subwoofer enclosure design, combining the woofer and amplifier in a compact 345 x 262 x 68mm housing. The published information confirms integrated circuit protection and a 25A fuse, but does not identify the enclosure, cone, or surround materials. Its shallow form factor is designed for applications with restricted mounting depth.\u003c\/p\u003e\u003cp\u003eMount the enclosure securely in a location with adequate clearance, ventilation, and protection from cargo or passenger contact. Use the supplied power and signal wiring harness as applicable, choose high-level input for speaker-output signals or low-level input for receiver preamp signals, and set the low-pass filter and bass boost conservatively before final tuning. Confirm under-seat clearance, wiring routes, and vehicle electrical requirements before installation.\u003c\/p\u003e","brand":"AUDIO360","offers":[{"title":"Default Title","offer_id":47970376024227,"sku":"AD1500US","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71W8-sfWDzL.jpg?v=1786151620"},{"product_id":"audio360-ads1050-10-inch-car-subwoofer-1500w-max-power-4-ohm-impedance-heavy-duty-construction-ideal-for-sealed-or-ported-enclosures","title":"Audio360 ADS1050 10-Inch Car Subwoofer","description":"\u003cp\u003eThe Audio360 ADS1050 is a 10-inch car subwoofer designed for adding dedicated low-frequency output to a custom vehicle audio system. It is a raw subwoofer driver, so it is intended to be installed in a compatible enclosure and powered by an external amplifier. Its 4-ohm impedance and 750-watt RMS power-handling rating make it suited to systems planned around a single subwoofer channel.\u003c\/p\u003e\u003cp\u003eThis model is for listeners who want to supplement factory or aftermarket full-range speakers with deeper bass reproduction. The 10-inch format offers a compact alternative to larger subwoofers while still supporting substantial power handling. It can be used in a range of vehicle applications when enclosure space and mounting clearance are verified first.\u003c\/p\u003e\u003cp\u003eThe ADS1050 is rated for 750 watts RMS and 1,500 watts maximum power handling. These ratings help guide amplifier selection, with the RMS figure being the more useful number for continuous power matching. A properly adjusted amplifier and correctly configured crossover are important for dependable system operation.\u003c\/p\u003e\u003cp\u003eAudio360 specifies the ADS1050 for either sealed or ported enclosures. A sealed enclosure is generally chosen when a more controlled bass character is desired, while a ported enclosure can be selected when the enclosure is designed for greater output. Enclosure volume, port tuning, and installation details are not specified in the confirmed product data and should be planned separately.\u003c\/p\u003e\u003cp\u003eThe subwoofer uses heavy-duty cone and surround construction for high-output use. Its 5.12-inch mounting depth and 9.06-inch cutout diameter provide the key fitment measurements needed when selecting or building an enclosure. Confirm available depth, cutout size, mounting-hole pattern, and enclosure suitability before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e750W RMS Handling:\u003c\/strong\u003e Supports amplifier matching based on continuous power capacity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1500W Maximum Power:\u003c\/strong\u003e Provides a stated peak power-handling reference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Driver:\u003c\/strong\u003e Adds dedicated bass capability in a space-conscious format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible aftermarket amplifier configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed or Ported Use:\u003c\/strong\u003e Supports different enclosure approaches for system tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Fitment:\u003c\/strong\u003e Uses a 5.12-inch mounting depth and 9.06-inch cutout.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ADS1050 is built around a heavy-duty cone and surround assembly intended for car-audio subwoofer duty. Audio360 identifies the driver as suitable for high-output conditions, while the 10-inch size helps it fit installations where larger subwoofers may not be practical. Specific cone material, surround material, voice-coil details, magnet specifications, and sensitivity are not confirmed in the available product information.\u003c\/p\u003e\u003cp\u003eInstall the ADS1050 in a properly constructed sealed or ported enclosure that accommodates its 9.06-inch cutout diameter and at least 5.12 inches of mounting depth. Pair it with a compatible external amplifier, set gain conservatively, and use appropriate filtering to limit the driver to bass frequencies. An enclosure, amplifier, wiring, and mounting hardware should be planned separately unless supplied by the selling package.\u003c\/p\u003e","brand":"AUDIO360","offers":[{"title":"Default Title","offer_id":47970382184611,"sku":"ADS1050","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/716f0RT12cL.jpg?v=1786151798"},{"product_id":"audio360-ads1250-12-shallow-mount-car-subwoofer-1500w-max-power-4-ohm-impedance-low-profile-design-for-trucks-suvs-ideal-for-sealed-or-ported-enclosures","title":"Audio360 ADS1250-SHALLOW 12\" Shallow Mount Car Subwoofer","description":"\u003cp\u003eThe Audio360 ADS1250-SHALLOW is a 12-inch shallow-mount car subwoofer designed for vehicles where conventional subwoofer depth is difficult to accommodate. Its low-profile form factor helps make bass upgrades practical in compact truck, SUV, and custom-enclosure applications. It is intended for shoppers who want to add low-frequency output while preserving available cargo or cabin space.\u003c\/p\u003e\u003cp\u003eThis subwoofer is rated for 750 watts RMS power handling and 1,500 watts maximum power. That rating makes it appropriate for use with a properly matched aftermarket amplifier rather than direct connection to a head unit. The 4-ohm impedance offers straightforward compatibility with many mono and multi-channel amplifier configurations.\u003c\/p\u003e\u003cp\u003eThe ADS1250-SHALLOW is engineered around a rigid, low-profile cone intended to support durable low-frequency reproduction. Its shallow mounting depth of 4.13 inches allows it to fit where deeper 12-inch subwoofers may not. The 11.22-inch cutout requirement provides a specific starting point when planning a custom enclosure or replacement installation.\u003c\/p\u003e\u003cp\u003eIt can be used in either sealed or ported enclosures, allowing the enclosure design to influence the final bass character. A sealed enclosure can suit listeners seeking a more controlled response, while a ported design can be selected when the system goal is greater output. Enclosure construction and amplifier setup remain important factors in the finished system's performance.\u003c\/p\u003e\u003cp\u003eThe Audio360 ADS1250-SHALLOW is a passive subwoofer, so it requires an external amplifier, suitable enclosure, wiring, and installation hardware to operate in a vehicle. It can serve as the bass component of a new system or as part of an upgrade that adds low-end support to factory or aftermarket speakers. Verify enclosure clearance, cutout size, amplifier capability, and vehicle-specific mounting considerations before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-Inch Shallow-Mount Format:\u003c\/strong\u003e Fits bass upgrades into installations with limited mounting depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e750W RMS Rating:\u003c\/strong\u003e Supports use with a properly matched external amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,500W Maximum Power:\u003c\/strong\u003e Provides stated peak power-handling capacity for the driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible aftermarket mono or multi-channel amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4.13-Inch Mounting Depth:\u003c\/strong\u003e Helps accommodate compact custom enclosure designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Or Ported Compatibility:\u003c\/strong\u003e Allows enclosure selection based on system goals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ADS1250-SHALLOW uses a rigid low-profile cone in a space-conscious 12-inch subwoofer design. Its shallow construction is intended for trucks, SUVs, and other applications where a full-depth subwoofer would be difficult to mount. The driver is designed for enclosure-based installation rather than use as a self-powered subwoofer.\u003c\/p\u003e\u003cp\u003ePlan for an 11.22-inch cutout diameter and at least 4.13 inches of mounting depth, with additional clearance considered for wiring and enclosure construction. Use an external amplifier compatible with a 4-ohm subwoofer and keep amplifier power appropriate for the 750W RMS rating. Select a sealed or ported enclosure according to the desired system design, and have a qualified installer confirm vehicle fitment when needed.\u003c\/p\u003e","brand":"AUDIO360","offers":[{"title":"Default Title","offer_id":47970382479523,"sku":"ADS1250-SHALLOW","price":74.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/610HCyade2L.jpg?v=1786151808"},{"product_id":"audio360-ads6525-6-5-inch-car-subwoofer-600w-max-power-compact-design-4-ohm-impedance-perfect-for-small-enclosures","title":"Audio360 ADS6525 6.5\" Car Subwoofer","description":"\u003cp\u003eThe Audio360 ADS6525 is a 6.5-inch car subwoofer made for adding low-frequency output where enclosure space is limited. It is rated for 300 watts RMS and 600 watts maximum power, providing a compact option for custom vehicle audio builds. Its small-format design is intended for installations that cannot accommodate a larger subwoofer.\u003c\/p\u003e\u003cp\u003eThis model is suited to listeners building a compact bass system in a small car, truck, console enclosure, or other space-conscious installation. The 4-ohm impedance supports integration with compatible aftermarket amplification. It can be used as part of a focused low-end upgrade rather than requiring a large enclosure footprint.\u003c\/p\u003e\u003cp\u003eThe ADS6525 is designed to reproduce bass with a compact driver format and reinforced moving components. Its reinforced cone and surround are specified to support dependable low-frequency operation. A properly matched amplifier and correctly designed enclosure are important for achieving controlled performance.\u003c\/p\u003e\u003cp\u003eInstallation dimensions help simplify enclosure planning for custom builds. The listed mounting depth is 3.54 inches, while the required cutout diameter is 5.71 inches. Confirm available clearance behind the mounting surface before cutting or installing the subwoofer.\u003c\/p\u003e\u003cp\u003eThe ADS6525 can be used in either sealed or ported enclosures, allowing the system to be tailored to the desired bass character. A sealed design can prioritize a more controlled presentation, while a ported enclosure can emphasize output when properly designed. Match the enclosure, amplifier, and wiring configuration to the subwoofer's published impedance and power ratings.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Subwoofer:\u003c\/strong\u003e Compact driver size supports space-conscious car audio installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W RMS Rating:\u003c\/strong\u003e Provides a continuous power-handling reference for amplifier matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600W Maximum Power:\u003c\/strong\u003e Indicates the stated peak power-handling capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible aftermarket amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReinforced Cone And Surround:\u003c\/strong\u003e Supports durable low-frequency operation under normal use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Or Ported Use:\u003c\/strong\u003e Allows enclosure selection based on system goals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ADS6525 uses a reinforced cone and surround construction intended for low-frequency reproduction in a compact driver. Its 6.5-inch format is designed for installations where available enclosure volume and mounting space are limited. The compact layout makes it suitable for custom enclosures that are sized specifically around the vehicle and system design.\u003c\/p\u003e\u003cp\u003ePlan for a 5.71-inch cutout diameter and 3.54-inch mounting depth, including clearance for the rear of the driver and connected speaker wire. Use an enclosure designed for a 6.5-inch subwoofer and select a compatible amplifier based on the published 4-ohm impedance and 300-watt RMS rating. The ADS6525 may be installed in sealed or ported enclosures, but enclosure dimensions and port tuning should be determined for the intended application.\u003c\/p\u003e","brand":"AUDIO360","offers":[{"title":"Default Title","offer_id":47970382774435,"sku":"ADS6525 (SUB)","price":46.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71Wt_Tx9EQL.jpg?v=1786151817"},{"product_id":"audio360-ads835-8-inch-car-subwoofer-1000w-max-power-4-ohm-impedance-compact-design-for-enhanced-bass-performance","title":"AUDIO360 ADS835 8-Inch 4-Ohm Car Subwoofer","description":"\u003cp\u003eThe AUDIO360 ADS835 is an 8-inch car subwoofer designed to add low-frequency output where installation space is limited. Its compact format suits vehicle audio systems using compact to mid-size subwoofer enclosures. With a 4-ohm nominal impedance, it is intended for use with compatible aftermarket amplification.\u003c\/p\u003e\u003cp\u003eRated at 500 watts RMS and 1,000 watts maximum power, the ADS835 is built for systems that need a dedicated bass driver rather than relying only on full-range door speakers. It can help reproduce the lower musical range with more presence and impact. Proper amplifier gain setting and enclosure selection remain important to its performance.\u003c\/p\u003e\u003cp\u003eThe ADS835 is suited to drivers building a first subwoofer system, replacing an existing 8-inch woofer, or fitting bass into a space-conscious installation. Its 8-inch diameter can be practical when a larger subwoofer is not appropriate for the available enclosure or vehicle layout. The 4-ohm configuration supports straightforward matching with an amplifier rated to operate at that load.\u003c\/p\u003e\u003cp\u003eA reinforced cone and surround provide the driver construction specified for this model. This design is intended to support repeated woofer movement during low-frequency playback. The shallow 3.15-inch mounting depth can also help where rear clearance behind the mounting panel is restricted.\u003c\/p\u003e\u003cp\u003eThe ADS835 can be used in either sealed or ported enclosures. A sealed enclosure is appropriate for a more controlled bass character, while a ported enclosure can prioritize additional low-frequency output when properly designed. Its 7.09-inch cutout diameter should be verified against the planned baffle before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W RMS Power Handling:\u003c\/strong\u003e Supports amplifier matching around its continuous power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,000W Maximum Power:\u003c\/strong\u003e Provides the listed peak power-handling specification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Subwoofer:\u003c\/strong\u003e Fits compact bass-system and replacement applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible aftermarket amplifier configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow Mounting Depth:\u003c\/strong\u003e Requires only 3.15 inches of rear clearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed or Ported Use:\u003c\/strong\u003e Allows enclosure selection for system goals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ADS835 uses a reinforced cone and surround, with a circular 8-inch driver layout. Its compact dimensions are intended for installations where enclosure volume and mounting clearance are important considerations. The driver is specified for in-car audio use and is listed as a passive wired subwoofer.\u003c\/p\u003e\u003cp\u003ePlan the enclosure and amplifier around the subwoofer's 4-ohm impedance and 500-watt RMS rating. Confirm a 7.09-inch mounting cutout and at least 3.15 inches of mounting depth before cutting a panel. Use either a properly designed sealed or ported enclosure, and have an experienced installer handle wiring, amplifier setup, and gain adjustment if needed.\u003c\/p\u003e","brand":"AUDIO360","offers":[{"title":"Default Title","offer_id":47970383528099,"sku":"ADS835","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71FZAXRRtfL.jpg?v=1786151837"},{"product_id":"audio360-ads840-8-inch-shallow-mount-car-subwoofer-1000w-max-power-compact-design-for-limited-space-perfect-for-trucks-under-seat-installations","title":"AUDIO360 ADS840-SHALLOW 8\" Shallow-Mount Car Subwoofer","description":"\u003cp\u003eThe AUDIO360 ADS840-SHALLOW is an 8-inch shallow-mount car subwoofer designed for vehicles where conventional deep subwoofers will not fit. Its compact mounting profile helps make bass upgrades possible in trucks, under-seat enclosures, and other limited-depth locations. It is intended for custom car-audio installations using a separate compatible amplifier.\u003c\/p\u003e\u003cp\u003eWith a 500-watt RMS power rating and 1000-watt maximum power rating, the ADS840 is built to add low-frequency output to an aftermarket system. Its 4-ohm impedance supports pairing with compatible mono or multi-channel amplifiers. The 8-inch format is a practical choice for systems that need bass reinforcement while preserving cabin or cargo space.\u003c\/p\u003e\u003cp\u003eThe shallow-mount layout uses a published mounting depth of 3.46 inches, helping installers work around space restrictions common in compact vehicles and truck interiors. A 7.28-inch cutout diameter provides the key measurement needed when planning a compatible enclosure baffle. Measure available depth behind the mounting surface, including clearance for wiring and enclosure construction, before installation.\u003c\/p\u003e\u003cp\u003eA rigid low-profile cone is specified for the ADS840, supporting a space-conscious design without relying on a full-depth driver profile. The design is intended to maintain consistent bass output in compact applications. Specific cone material, voice-coil details, and Thiele\/Small parameters are not published in the available product information.\u003c\/p\u003e\u003cp\u003eThe ADS840 can be used in either sealed or ported enclosures, allowing the enclosure design to be matched to available space and listening goals. A sealed enclosure may suit installations prioritizing a compact footprint, while a properly designed ported enclosure can be considered where enclosure volume permits. For a complete upgrade, pair the subwoofer with a compatible amplifier, enclosure, wiring, and appropriate system tuning.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Shallow Design:\u003c\/strong\u003e Fits applications with limited mounting depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W RMS Rating:\u003c\/strong\u003e Supports amplifier matching for sustained output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1000W Maximum Power:\u003c\/strong\u003e Provides short-term peak power handling specification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible aftermarket amplifier configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.46-Inch Mounting Depth:\u003c\/strong\u003e Helps accommodate tight enclosure locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Or Ported Compatibility:\u003c\/strong\u003e Supports multiple custom enclosure approaches.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ADS840 uses a rigid, low-profile cone design intended for shallow-mount subwoofer installations. Its compact 8-inch driver format and shallow 3.46-inch mounting depth are the primary design considerations for space-limited systems. Published information does not specify the cone material, surround material, basket material, magnet details, or voice-coil construction.\u003c\/p\u003e\u003cp\u003ePlan the enclosure around the 7.28-inch cutout diameter and verify that at least 3.46 inches of mounting depth is available behind the baffle, with additional room for terminals and wiring. Use a compatible external amplifier designed for a 4-ohm subwoofer load, and select a sealed or ported enclosure according to the available installation space. Enclosure volume, port tuning, wiring method, and amplifier gain settings are not published for this model and should be determined during system design.\u003c\/p\u003e","brand":"AUDIO360","offers":[{"title":"Default Title","offer_id":47970383888547,"sku":"ADS840-SHALLOW","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61uFX9GYk2L.jpg?v=1786151848"},{"product_id":"audiotek-at-800us","title":"Audiotek AT-800US 10\" Slim Powered Under-Seat Subwoofer","description":"\u003cp\u003eThe Audiotek AT-800US is a 10-inch powered subwoofer enclosure designed to add low-frequency output to a car or truck audio system without requiring a separate external amplifier. Its slim, angled enclosure is intended for space-conscious installations, including under-seat, trunk, or behind-seat locations where clearance permits. The integrated amplifier and enclosure simplify a bass upgrade compared with assembling separate subwoofer, box, and amplifier components.\u003c\/p\u003e\u003cp\u003eThis model is suited to drivers who want more bass presence from factory or aftermarket speakers while retaining usable cabin and cargo space. It accepts both RCA low-level and speaker-level signals, allowing it to work with many head units and factory-radio integration setups. Check available clearance and plan the power, ground, and turn-on connections before installation.\u003c\/p\u003e\u003cp\u003eConfirmed published specifications list 200 watts RMS and 400 watts peak output for the AT-800US. Its bass adjustments include variable gain, a built-in low-pass filter, selectable phase, and a variable bass boost control. These controls help match bass level and blend the subwoofer with the vehicle's main speakers.\u003c\/p\u003e\u003cp\u003eThe AT-800US uses an aluminum chassis intended to help dissipate heat during operation, while a front metal grille helps protect the subwoofer driver. Power and protection LED indicators provide basic operating-status feedback. Overheat and reverse-polarity protection are also listed for the integrated powered enclosure.\u003c\/p\u003e\u003cp\u003eAs an active subwoofer, the AT-800US is a self-contained addition to a vehicle audio system rather than a passive subwoofer requiring an outboard amplifier. A wired remote level control is included for convenient bass adjustment from the cabin. It can be used as a compact bass foundation in an OEM-radio upgrade or paired with an aftermarket receiver that has RCA preamp outputs.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Active Subwoofer:\u003c\/strong\u003e Combines a subwoofer, enclosure, and amplifier in one unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlim Angled Enclosure:\u003c\/strong\u003e Supports space-conscious under-seat, trunk, or behind-seat placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200W RMS Output:\u003c\/strong\u003e Provides continuous power handling listed for the integrated system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Input Options:\u003c\/strong\u003e Accepts RCA low-level or speaker-level audio signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Bass Controls:\u003c\/strong\u003e Includes gain, low-pass filter, phase, and bass boost adjustments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Remote Level Control:\u003c\/strong\u003e Lets the listener adjust bass level from the cabin.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AT-800US is built around a slim aluminum chassis with an angled enclosure profile. Its aluminum construction is listed to assist heat dissipation, and the front metal grille helps shield the driver from incidental contact. Power and protection indicators provide visible operating feedback.\u003c\/p\u003e\u003cp\u003eMount the enclosure securely in a ventilated location with sufficient clearance, such as under a seat, in a trunk, or behind a rear seat. Connect fused battery power, a short chassis ground, remote turn-on, and either RCA low-level or speaker-level signal wiring as appropriate for the vehicle. Set gain, low-pass filter, bass boost, and phase gradually after installation to blend the subwoofer with the rest of the system.\u003c\/p\u003e","brand":"AUDIOTEK","offers":[{"title":"Default Title","offer_id":47970387787939,"sku":"AT-800US","price":60.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/81d4-UCal6L.jpg?v=1786151996"},{"product_id":"audison-apbmws8-2-2","title":"Audison APBMW S8-2.2 8\" BMW\/MINI Underseat Subwoofer","description":"\u003cp\u003eThe Audison APBMW S8-2.2 is an 8-inch, 2-ohm underseat subwoofer designed for select BMW and MINI applications. It is intended to replace a factory underseat woofer while using the vehicle's original acoustic enclosure. This approach supports a cleaner OEM-style upgrade without adding a separate subwoofer box to the cabin or cargo area.\u003c\/p\u003e\u003cp\u003eIts 200 mm driver is engineered for bass and midbass reproduction from 40 to 500 Hz. With 150 watts continuous power handling and 91 dB sensitivity, it is suited to systems that need stronger low-frequency foundation than the original driver can provide. The 2-ohm design is intended for use with amplification that is stable at a 2-ohm speaker load.\u003c\/p\u003e\u003cp\u003eA neodymium magnetic assembly helps keep the driver compact for the shallow underseat location. The design uses an inverted acoustic structure with an internal cone, while the pressed-paper cone and rubber surround are selected for controlled cone movement. A plastic chassis supports the vehicle-specific form factor.\u003c\/p\u003e\u003cp\u003eThe APBMW S8-2.2 uses a copper voice coil on an aluminum former for heat handling and stability during excursion. Its specified linear excursion is ±7 mm, with 10 mm of mechanical excursion. These characteristics are paired with electroacoustic parameters developed to work with the factory underseat acoustic load.\u003c\/p\u003e\u003cp\u003eThis subwoofer is a practical option for a BMW or MINI audio upgrade centered on retaining the factory layout. Audison specifically identifies the 2-ohm configuration for active multi-amplified systems, including use with its AP 8.9 bit amplifier. Confirm vehicle fitment, factory-system configuration, and amplifier load capability before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBMW\/MINI-Specific Tuning:\u003c\/strong\u003e Designed to use the factory underseat acoustic enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Impedance:\u003c\/strong\u003e Supports higher output from compatible 2-ohm-stable amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150 W Continuous Handling:\u003c\/strong\u003e Matches amplified OEM-replacement system upgrades.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Magnet:\u003c\/strong\u003e Provides compact magnetic motor design for shallow installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed-Paper Cone:\u003c\/strong\u003e Works with a rubber surround for controlled driver movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Placement Gaskets:\u003c\/strong\u003e Two 5 mm gaskets are provided for installation positioning.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe APBMW S8-2.2 combines a plastic chassis, neodymium magnet, pressed-paper cone, rubber surround, copper voice coil, and aluminum former. Its shallow 55.2 mm overall depth and 32 mm mounting depth are tailored to underseat placement. The driver has a 50 mm voice-coil diameter and a 159 mm effective piston diameter.\u003c\/p\u003e\u003cp\u003eUse the APBMW S8-2.2 only where the vehicle has a compatible factory underseat woofer location and sufficient clearance. Verify that the amplifier channel is rated for a 2-ohm load and set crossover, level, and DSP tuning appropriately for the rest of the system. The included 5 mm gaskets can be used as needed for OEM-placement fitment.\u003c\/p\u003e","brand":"AUDISON","offers":[{"title":"Default Title","offer_id":47970391851171,"sku":"APBMWS8-2-2","price":222.84,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71D7fUXxA5L.jpg?v=1786152374"},{"product_id":"hertz-st35kneo","title":"Audison APS 10 S4S 10\" 4 Ohm Shallow Subwoofer","description":"\u003cp\u003eThe Audison APS 10 S4S is a 10-inch shallow-mount subwoofer driver designed for compact car-audio bass upgrades. Its single 4-ohm voice coil and 400-watt continuous power rating make it suitable for systems that need controlled low-frequency output without requiring a large enclosure. It is optimized for sealed enclosures beginning at 10 liters, or about 0.35 cubic feet.\u003c\/p\u003e\u003cp\u003eThis subwoofer is intended for installers and enthusiasts working with limited mounting depth in trunks, custom side panels, under-floor spaces, or other compact locations. The 88 mm mounting depth helps make installation possible where conventional full-depth woofers may not fit. Its compact enclosure requirements also support space-conscious system designs.\u003c\/p\u003e\u003cp\u003eThe APS 10 S4S is built to cover bass frequencies with a specified free-air resonance of 28.5 Hz and an excursion capability rated at 12.6 mm Xmax. Its water-repellent pressed-paper cone is engineered to provide a practical balance of low-frequency response and durability for mobile environments. A 60 mm voice coil and high-density flux ferrite motor support power handling and cone control.\u003c\/p\u003e\u003cp\u003eAudison uses a ventilated basket arrangement beneath the spider, eliminating the need for a center-pole vent. This design helps enable installation close to the rear wall of an enclosure while retaining a shallow overall profile. The cone and dust-cap geometry is also designed to support linear movement while keeping mounting depth low.\u003c\/p\u003e\u003cp\u003eAs a passive subwoofer driver, the APS 10 S4S requires a separate compatible amplifier and a properly built enclosure. It can be used as a single 4-ohm subwoofer, or two units can be wired in parallel for a 2-ohm load when matched with an appropriate amplifier. A steel mesh grille and plastic gasket are included to help protect the driver and finish the installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Shallow Driver:\u003c\/strong\u003e Fits compact custom subwoofer applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e400W Continuous Power:\u003c\/strong\u003e Supports properly matched external amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 4-Ohm Voice Coil:\u003c\/strong\u003e Provides straightforward amplifier load matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed-Enclosure Design:\u003c\/strong\u003e Optimized for enclosures from 10 liters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Supports durable mobile-audio use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Density Ferrite Motor:\u003c\/strong\u003e Helps control the cone at excursion.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe APS 10 S4S uses a water-repellent pressed-paper cone, a 60 mm voice coil, and a high-density flux ferrite magnet. Its basket includes air venting beneath the spider, while the motor assembly is designed for control under higher-excursion operation. The included steel mesh grille and plastic gasket provide added driver protection and installation finishing hardware.\u003c\/p\u003e\u003cp\u003eInstall this driver in a sealed enclosure with an internal volume of at least 10 liters (approximately 0.35 cubic feet). Confirm the available mounting depth of 88 mm and the listed driver dimensions before cutting a mounting opening. Use an amplifier designed to operate safely with a 4-ohm speaker load, observe correct polarity, and ensure the enclosure is rigid and airtight for intended performance.\u003c\/p\u003e","brand":"HERTZ","offers":[{"title":"Default Title","offer_id":47970392244387,"sku":"ST35KNEO","price":320.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71Exi-yjeZL.jpg?v=1786152394"},{"product_id":"audison-aps10s4s","title":"Audison APS 10 S4S 10\" 4-Ohm Shallow Subwoofer","description":"\u003cp\u003eThe Audison APS 10 S4S is a 10-inch shallow subwoofer driver designed for car-audio systems that need meaningful low-frequency reinforcement without requiring a large enclosure. Its single 4-ohm voice coil configuration makes it a straightforward choice for a dedicated subwoofer amplifier channel or a bridged amplifier setup. It is intended for custom sealed enclosures with internal volume starting at 10 liters.\u003c\/p\u003e\u003cp\u003eThis Prima-series subwoofer addresses installations where mounting depth and enclosure space are limited, such as compact trunks, underfloor areas, and vehicle-specific build locations. Its 120 mm ultra-low-profile design helps reduce the space required behind the driver. Basket ventilation beneath the spider also eliminates the need for a central pole vent, helping support close placement to an enclosure’s rear wall.\u003c\/p\u003e\u003cp\u003eRated for 400 watts continuous power and 800 watts peak power, the APS 10 S4S is built for properly amplified bass duty in a sealed system. Its 4-ohm nominal impedance and single voice coil simplify amplifier matching compared with multi-coil wiring arrangements. The driver uses a 60 mm voice coil, a high-density-flux ferrite motor, and a water-repellent pressed-paper cone.\u003c\/p\u003e\u003cp\u003eAudison engineers the cone, dustcap, and basket geometry to support long linear excursion while maintaining a compact mounting profile. The driver has 12.6 mm Xmax and an 18 mm mechanical excursion specification. Its motor assembly is optimized using finite-element modeling for control under high-power, high-excursion operating conditions.\u003c\/p\u003e\u003cp\u003eThe APS 10 S4S is a component subwoofer, so a separate enclosure, amplifier, wiring, and installation hardware are needed to complete a system. It can serve as a compact bass upgrade alongside factory or aftermarket speakers when installed in a correctly sized sealed enclosure. A steel mesh grille and plastic gasket are included to help protect the driver and finish the installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Shallow Design:\u003c\/strong\u003e Provides compact bass capability with a 120 mm ultra-low profile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e400W Continuous Rating:\u003c\/strong\u003e Supports sustained subwoofer power handling in a properly configured system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 4-Ohm Voice Coil:\u003c\/strong\u003e Simplifies wiring to a compatible 4-ohm amplifier channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed-Enclosure Optimization:\u003c\/strong\u003e Designed for sealed enclosures starting at 10 liters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Uses treated pressed paper for the moving cone assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Protection Grille:\u003c\/strong\u003e Steel mesh grille helps protect the installed subwoofer driver.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe APS 10 S4S combines a high-density-flux ferrite magnet with a 60 mm voice coil and water-repellent pressed-paper cone. Its basket includes vents beneath the spider, while the shallow geometry is designed to retain excursion capability in a compact format. The supplied steel mesh grille and plastic gasket provide practical finishing and protection components.\u003c\/p\u003e\u003cp\u003eInstall this driver in a custom sealed enclosure with at least 10 liters of volume, allowing for the driver’s 1.12-liter displacement during enclosure planning. Verify the 270 mm outside diameter, 233 mm Dimension B, and 88 mm mounting-depth measurement against the available mounting location before cutting. Use an amplifier that is stable at 4 ohms, set gains carefully, and configure the system’s crossover and enclosure construction for subwoofer use.\u003c\/p\u003e","brand":"AUDISON","offers":[{"title":"Default Title","offer_id":47970392277155,"sku":"APS10S4S","price":235.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71Exi-yjeZL_da9a226d-834e-4f29-aa02-24e69a63a5bb.jpg?v=1786152396"},{"product_id":"audison-aps8d","title":"Audison APS 8 D Prima 8\" Dual 4-Ohm Shallow Subwoofer","description":"\u003cp\u003eThe Audison APS 8 D is an 8-inch passive car subwoofer designed for installations where bass reinforcement is needed but enclosure depth and available space are limited. Its dual 4-ohm voice coils provide flexible wiring options for compatible amplifiers. It is intended for use in a compact sealed enclosure rather than as a free-air or loaded-box replacement.\u003c\/p\u003e\u003cp\u003eWith 250 watts continuous power handling and 500 watts peak power handling, the APS 8 D is suited to systems that need controlled low-frequency support without requiring a large subwoofer cabinet. Its 83.5 dB sensitivity and compact-driver format make correct amplifier matching and enclosure design especially important. The driver is designed around sealed-box use beginning at 7.5 liters.\u003c\/p\u003e\u003cp\u003eA 79 mm mounting depth helps the APS 8 D fit locations where a conventional full-depth subwoofer may not clear the rear wall of the enclosure or available vehicle structure. Audison uses a cone, dustcap, and basket geometry intended to retain useful linear excursion in this shallow format. The specified linear excursion is ±8.8 mm.\u003c\/p\u003e\u003cp\u003eThe water-repellent pressed-paper cone is paired with a high-density flux ferrite motor assembly for low-frequency reproduction in vehicle environments. Basket vents beneath the spider support cooling without a central pole vent. This design also allows the driver to be mounted closer to the rear wall of a properly built enclosure.\u003c\/p\u003e\u003cp\u003eThe APS 8 D is a practical choice for custom OEM-integration upgrades, compact hatchback or trunk installations, and systems using an external subwoofer amplifier. Its dual-coil configuration can be wired for a 2-ohm or 8-ohm final load when both coils are used, provided the amplifier is rated for that load. A steel mesh grille and plastic gasket are included for installation and driver protection.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Sealed-Box Design:\u003c\/strong\u003e Engineered for sealed enclosures starting at 7.5 liters, helping conserve cargo and installation space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e79 mm Mounting Depth:\u003c\/strong\u003e The low-profile basket supports installations with limited rear clearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Enables series or parallel wiring options to suit compatible amplifier load ratings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250W Continuous Handling:\u003c\/strong\u003e Provides a realistic continuous-power target for selecting an external amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e±8.8 mm Linear Excursion:\u003c\/strong\u003e Supports meaningful cone travel within a shallow-subwoofer installation format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Uses a pressed-paper cone material selected for automotive subwoofer duty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe APS 8 D uses a high-density flux ferrite magnet, water-repellent pressed-paper cone, and a 40 mm voice-coil assembly. Its basket incorporates air vents beneath the spider rather than a central pole vent, and the surround and spider are designed to help control unwanted rocking motion. The included steel mesh grille provides physical protection, while the plastic gasket helps finish the mounting surface.\u003c\/p\u003e\u003cp\u003eInstall the APS 8 D in a sealed enclosure with at least 7.5 liters of internal volume; Audison documents an 8.5-liter, Qtc 0.85 sealed design as a suggested enclosure alignment. Confirm the 187 mm mounting cutout, 79 mm mounting depth, and rear clearance before building or modifying an enclosure. Wire the two 4-ohm voice coils in series for an 8-ohm load or in parallel for a 2-ohm load only when the amplifier is stable at the resulting impedance.\u003c\/p\u003e","brand":"AUDISON","offers":[{"title":"Default Title","offer_id":47970392309923,"sku":"APS8D","price":146.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61jRcTTGCbL.jpg?v=1786152399"},{"product_id":"audison-aps10d","title":"Audison APS10D Prima 10\" Dual 4-Ohm Subwoofer","description":"\u003cp\u003eThe Audison APS 10 D is a 10-inch dual-voice-coil subwoofer from the Prima series, designed for vehicle bass upgrades where enclosure space is limited. It is intended for sealed enclosures beginning at 10 liters, making it suitable for compact trunk, hatch, and custom-install applications. Its 4+4-ohm voice-coil arrangement gives installers wiring flexibility when matching an appropriate amplifier.\u003c\/p\u003e\u003cp\u003eThis driver is built for listeners who want to add low-frequency foundation without committing to a deep, large-volume subwoofer installation. It handles 400 watts continuous power and 800 watts peak power, with a 27 Hz resonant frequency and 84 dB sensitivity. The design focuses on controlled bass performance from a compact sealed enclosure rather than requiring a large box.\u003c\/p\u003e\u003cp\u003eAudison uses a cone, dustcap, and basket geometry designed to support substantial excursion while limiting installation depth. The APS 10 D has a 12.6 mm maximum linear excursion rating and an 88 mm mounting depth. This combination helps make the driver practical for installations where rear clearance is restricted.\u003c\/p\u003e\u003cp\u003eA water-repellent pressed-paper cone is paired with a high-density flux ferrite motor assembly. The motor is optimized with finite element modeling to maintain control under high-power and high-excursion use. Venting beneath the spider eliminates the need for a central pole vent, allowing the driver to sit closer to the enclosure's rear wall when properly installed.\u003c\/p\u003e\u003cp\u003eThe APS 10 D can complement an OEM-integration or aftermarket audio system when paired with a compatible external amplifier and sealed enclosure. Its dual 4-ohm coils can be wired to suit the amplifier's supported load. A steel mesh grille and plastic gasket are included to support a finished installation and help protect the driver.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Sealed-Box Design:\u003c\/strong\u003e Delivers bass performance in sealed enclosures starting at 10 liters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Provides wiring flexibility for compatible amplifier configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e400W Continuous Handling:\u003c\/strong\u003e Supports appropriately matched external amplification for sustained listening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow Mounting Depth:\u003c\/strong\u003e The 88 mm mounting depth helps fit restricted installation locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Uses a durable cone material developed for subwoofer operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBasket-Integrated Venting:\u003c\/strong\u003e Allows closer placement to the enclosure rear wall.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe APS 10 D uses a high-density flux ferrite magnet, 60 mm voice coil, water-repellent pressed-paper cone, and a steel mesh grille. Its basket geometry and surround\/spider design are engineered to support linear cone travel while helping limit rocking motion. The included plastic gasket helps provide a neat interface between the driver and mounting surface.\u003c\/p\u003e\u003cp\u003eUse this subwoofer in a sealed enclosure with an internal volume starting at 10 liters; a 10 to 12 liter enclosure is specified for compact applications. Confirm the 270 mm outside diameter, 233 mm cutout diameter, and 88 mm mounting depth before building or modifying an enclosure. Wire the dual 4-ohm coils only in a configuration supported by the connected amplifier, and set amplifier gain and filtering appropriately during installation.\u003c\/p\u003e","brand":"AUDISON","offers":[{"title":"Default Title","offer_id":47970392408227,"sku":"APS10D","price":235.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71RnLhIPHoL.jpg?v=1786152402"},{"product_id":"audison-av-12-d2-ii","title":"Audison AV 12 D2 II 12\" Dual 2-Ohm Subwoofer","description":"\u003cp\u003eThe Audison AV 12 D2 II is a 12-inch dual-2-ohm subwoofer designed for vehicle audio systems that need substantial low-frequency output without requiring an oversized enclosure. Its dual voice coils provide wiring flexibility when matching the subwoofer to a compatible mono or multi-channel amplifier. The design is intended for listeners building a sound-quality-focused bass system in a limited amount of vehicle space.\u003c\/p\u003e\u003cp\u003eWith 550 watts continuous power handling and 1,100 watts peak power handling, the AV 12 D2 II is built for amplified systems with appropriately matched power. Its 25 to 400 Hz frequency-response specification supports use as a dedicated low-frequency driver. The 85 dB sensitivity rating and 23 Hz resonant frequency reflect a design centered on controlled bass extension rather than shallow, decorative installation.\u003c\/p\u003e\u003cp\u003eA 38.6 mm CCAW voice coil uses copper-clad aluminum wire to balance thermal capability with reduced moving mass. The motor system uses a high-density-flux ferrite magnet, while Audison Airflow Venting Cooling technology is designed to help manage voice-coil temperature during sustained operation. These elements support stable performance when the subwoofer is installed, filtered, and powered within its specifications.\u003c\/p\u003e\u003cp\u003eThe polypropylene cone uses a FEM-optimized dust cap and a radial reinforcement framework beneath the cone to increase rigidity during high-excursion movement. A nitrile-rubber surround supports the cone through its rated 16.8 mm Xmax. Together with the die-cast aluminum chassis, these materials are intended to maintain controlled cone motion and durable operation.\u003c\/p\u003e\u003cp\u003eThe AV 12 D2 II can be used in sealed or vented enclosure designs, with manufacturer data provided for compact and performance-oriented examples. It is supplied with a protective metal mesh grille and mounting screws for cone protection. Pair it with an amplifier that is stable at the final impedance created by the selected series or parallel voice-coil wiring, and use the manufacturer enclosure and crossover guidance as the foundation for system tuning.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 2-Ohm Voice Coils:\u003c\/strong\u003e Supports series or parallel wiring options for compatible amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e550W Continuous Handling:\u003c\/strong\u003e Accommodates substantial amplifier power when correctly configured.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coil:\u003c\/strong\u003e Combines thermal capability with reduced moving mass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow Venting Cooling:\u003c\/strong\u003e Helps dissipate heat around the voice coil.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReinforced Polypropylene Cone:\u003c\/strong\u003e Supports rigid, controlled movement at high excursion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtective Metal Grille:\u003c\/strong\u003e Helps protect the cone in exposed installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AV 12 D2 II uses a die-cast aluminum basket, high-density-flux ferrite magnet, polypropylene cone, nitrile-rubber surround, glass-fiber former, and CCAW voice coil. The basket includes cable-routing hooks, and the spring-loaded terminals accept up to 8 AWG speaker cable. A black metal mesh grille and mounting screws are included.\u003c\/p\u003e\u003cp\u003eUse the 284 mm mounting-hole specification when planning the baffle cutout, and allow sufficient rear clearance for the listed mounting dimensions. Audison provides sealed and reflex enclosure examples; the compact sealed design uses 21 L, while the compact reflex design uses 27.1 L tuned to 26.5 Hz. Confirm the final load presented by the dual 2-ohm coils before selecting an amplifier, and apply suitable low-pass and subsonic filtering for the chosen enclosure type.\u003c\/p\u003e","brand":"AUDISON","offers":[{"title":"Default Title","offer_id":47970392932515,"sku":"AV 12 D2 II","price":516.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71wFZmN33yL_f66b65f0-e2e3-4ecd-ae82-b3158bfdfb24.jpg?v=1786152414"},{"product_id":"audison-av-12-d4-ii","title":"Audison AV 12 D4 II 12\" Dual 4-Ohm Subwoofer","description":"\u003cp\u003eThe Audison AV 12 D4 II is a 300 mm (12-inch) dual-voice-coil subwoofer designed for high-performance car audio systems. It adds low-frequency extension where factory speakers or smaller subwoofers cannot provide sufficient bass depth. Its dual 4-ohm voice coil configuration gives installers useful wiring flexibility when matching the subwoofer to a compatible amplifier.\u003c\/p\u003e\u003cp\u003eBuilt for controlled bass reproduction, the AV 12 D4 II is intended for listeners who want a detailed low end without requiring an oversized enclosure. It is optimized for sealed-box use and is suited to installations where available cargo or cabin space is limited. Audison rates it for 550 watts continuous power handling and 1100 watts peak power handling.\u003c\/p\u003e\u003cp\u003eA 38.6 mm (1.5-inch) CCAW voice coil combines copper-clad aluminum wire construction with a glass-fiber former. The motor structure uses a ferrite magnet and Airflow Venting Cooling technology to help manage heat during sustained operation. This design supports consistent performance when the subwoofer is driven by an appropriately matched amplifier.\u003c\/p\u003e\u003cp\u003eThe polypropylene cone uses an extended-profile dust cap and Radial Reinforcement Framework to improve structural stability during excursion. Audison also uses FEM optimization in the magnetic circuit and dust-cap design to support cone rigidity and damping. The result is a subwoofer engineered for clean, controlled bass across its 25 to 400 Hz rated frequency response.\u003c\/p\u003e\u003cp\u003eThe AV 12 D4 II fits naturally into a VOCE II-based upgrade or a custom active system using a dedicated subwoofer amplifier. Its 4+4-ohm configuration can be wired in series or parallel according to the amplifier's approved impedance range. A protective metal mesh grille is included for installations where the cone may be exposed.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Supports flexible series or parallel wiring with a compatible amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e550W Continuous Handling:\u003c\/strong\u003e Provides substantial power capacity for a dedicated bass channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.5-Inch CCAW Voice Coil:\u003c\/strong\u003e Helps balance thermal handling with reduced moving mass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow Venting Cooling:\u003c\/strong\u003e Directs airflow through internal channels to manage voice-coil heat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReinforced Polypropylene Cone:\u003c\/strong\u003e Uses R.R.F. structure and an extended-profile dust cap for stability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDie-Cast Aluminum Basket:\u003c\/strong\u003e Provides a rigid platform with integrated cable-routing hooks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AV 12 D4 II uses a die-cast aluminum chassis, ferrite magnetic assembly, polypropylene cone, nitrile-rubber surround, and glass-fiber voice-coil former. Its basket incorporates a magnet cover and dual cable-routing hooks, while spring-loaded horizontal terminals accept up to 8 AWG cable. A black metal mesh grille and mounting screws are included to protect the driver in exposed installations.\u003c\/p\u003e\u003cp\u003ePlan the enclosure and amplifier together before installation. Audison publishes sealed and reflex enclosure designs, including a 21 L compact sealed alignment with a 284 mm mounting hole; verify mounting depth, clearance, and final internal air volume in the vehicle. Use an amplifier stable at the final impedance created by the selected series or parallel voice-coil wiring, and apply the published crossover guidance as a starting point for system tuning.\u003c\/p\u003e","brand":"AUDISON","offers":[{"title":"Default Title","offer_id":47970392965283,"sku":"AV 12 D4 II","price":518.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71wFZmN33yL.jpg?v=1786152417"},{"product_id":"audison-av6-5pii","title":"Audison AV 6.5 P II 6.5\" Woofer","description":"\u003cp\u003eThe Audison AV 6.5 P II is a 165 mm (6.5 in.) VOCE II component woofer designed for front-door mid-bass and midrange duty in a high-quality car audio system. Its 4-ohm design and 150 W continuous power handling make it suitable for amplified speaker upgrades where factory door speakers lack output, control, or clarity. The driver is intended to reproduce bass and lower-to-upper midrange frequencies rather than function as a full-range coaxial speaker. It is a practical choice for custom active systems or matched component installations.\u003c\/p\u003e\u003cp\u003eA 40 mm CCAW voice coil supports the woofer's power handling and excursion capability while helping manage heat. The specified frequency response is 45 to 7,500 Hz at -6 dB, providing useful bandwidth for a door-mounted woofer paired with a tweeter or midrange. With a 91 dB sensitivity rating measured at 2.83 V\/1 m, it is positioned for systems that balance amplifier power with efficient output. Its low 0.3 mH inductance also supports extension into the upper midrange.\u003c\/p\u003e\u003cp\u003eThe AV 6.5 P II uses a semi-pressed paper cone with cotton fibers and a rubber surround. This material combination is selected to keep the moving assembly light while maintaining damping and cone control. A glass-fiber former supports the voice coil, while the high-density-flux ferrite motor provides the magnetic drive. The die-cast aluminum basket and magnet cover contribute to a rigid installation structure.\u003c\/p\u003e\u003cp\u003eAudison incorporates a T-shaped pole piece with an aluminum shorting ring in the motor assembly to reduce inductance-related effects and help linearize response during excursion. The magnetic circuit geometry is FEM optimized to concentrate magnetic flux at the voice coil. These details are intended to support clean, controlled mid-bass response and useful off-axis performance in vehicle door locations. The driver has 4.95 mm of Xmax and 7.5 mm of mechanical excursion.\u003c\/p\u003e\u003cp\u003eThe AV 6.5 P II fits naturally into a VOCE II front stage with compatible tweeters, midranges, and crossover options. For an active DSP system, Audison recommends a Linkwitz-Riley 24 dB\/octave high-pass filter as low as 70 Hz, with a symmetrical low-pass point matched to the associated tweeter or midrange. OEM-style two-pin and standard terminal connections provide wiring flexibility during installation and service. Optional AVG 6.5 B II and AVG 6.5 S II mesh grilles are available separately for exposed installations.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e40 mm CCAW Voice Coil:\u003c\/strong\u003e Supports 150 W continuous power handling and heat management.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Inductance Motor:\u003c\/strong\u003e Aluminum shorting ring helps extend upper-midrange performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFEM-Optimized Magnetic Circuit:\u003c\/strong\u003e Focuses magnetic flux for controlled, efficient operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSemi-Pressed Paper Cone:\u003c\/strong\u003e Cotton-fiber cone balances low mass with damping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDie-Cast Aluminum Basket:\u003c\/strong\u003e Provides a rigid chassis with a magnet cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Connection Options:\u003c\/strong\u003e OEM-style connector and standard terminals simplify integration.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThis woofer combines an aluminum chassis, high-density-flux ferrite magnet, glass-fiber voice-coil former, CCAW winding, semi-pressed paper cone, and rubber surround. Its 100 x 45 x 18 mm magnetic assembly and 1.6 kg weight reflect its substantial motor structure. The 165 mm outer diameter, 140.8 mm mounting diameter, and 74.2 mm overall depth should be checked against the vehicle's speaker opening and door clearance before installation.\u003c\/p\u003e\u003cp\u003eUse an amplifier stable at a 4-ohm speaker load and set gain conservatively for the 150 W continuous rating. In an active DSP installation, Audison recommends a 70 Hz Linkwitz-Riley 24 dB\/octave high-pass filter as a minimum starting point; set the low-pass filter symmetrically with the associated tweeter or midrange crossover point. The driver offers standard terminals plus an OEM-grade two-pin connector; the supplied bare-wire pigtail can be soldered or crimped to the vehicle speaker wiring.\u003c\/p\u003e","brand":"AUDISON","offers":[{"title":"Default Title","offer_id":47970393030819,"sku":"AV6-5PII","price":401.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71rn7fUFJvL.jpg?v=1786152420"},{"product_id":"cerwin-vega-cer-bkx212s","title":"Cerwin Vega BKX212S Dual 12\" Sealed Bass Package","description":"\u003cp\u003eThe Cerwin Vega BKX212S is a complete bass package built around a dual 12-inch loaded sealed enclosure and a matching XED3001D monoblock amplifier. It provides a straightforward way to add dedicated low-frequency output to a factory or aftermarket car audio system. The preloaded enclosure reduces the need to select separate subwoofers, box, and amplifier components.\u003c\/p\u003e\u003cp\u003eThis package is intended for drivers who want a compact, coordinated bass upgrade for a trunk or cargo-area installation. Its sealed enclosure design is suited to controlled, defined bass response rather than a ported-box presentation. The system has a 2-ohm nominal final impedance and is rated for 300 watts RMS total.\u003c\/p\u003e\u003cp\u003eTwo 12-inch XED Series subwoofers are installed in the enclosure, creating a larger cone area than a single-subwoofer solution. The enclosure uses MDF construction and a sloped profile to support practical vehicle placement. Polypropylene cones, vented motor structures, poly-cotton spiders, and stamped Vega basket frames are part of the listed subwoofer design.\u003c\/p\u003e\u003cp\u003eThe included XED3001D amplifier is a compact Class D mono amplifier rated at 300 watts RMS at 2 ohms. It provides low-level and high-level input sensitivity ranges, allowing integration with many aftermarket receivers and compatible factory-radio installations. Adjustable low-pass, subsonic, and bass-boost controls support system setup for the vehicle and music preferences.\u003c\/p\u003e\u003cp\u003eThe BKX212S can serve as the bass foundation of a broader vehicle audio upgrade while leaving the front and rear speakers powered separately. Its amplifier includes signal-sensing remote turn-on, LED power\/protect indication, and thermal, overload, and speaker-short protection. A 4 AWG amplifier wiring kit is recommended by the manufacturer for installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 12-Inch XED Subwoofers:\u003c\/strong\u003e Provides a preloaded two-subwoofer bass solution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Enclosure:\u003c\/strong\u003e Supports controlled bass response in a compact package.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300-Watt RMS System:\u003c\/strong\u003e Matches the included amplifier's 2-ohm RMS output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXED3001D Mono Amplifier:\u003c\/strong\u003e Supplies dedicated Class D power for the enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Level Inputs:\u003c\/strong\u003e Helps integrate with compatible factory audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Bass Controls:\u003c\/strong\u003e Lets installers tailor crossover, subsonic, and boost settings.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe enclosure is specified with 3\/4-inch MDF construction, dual 12-inch subwoofers, and a sealed acoustic-suspension design. Listed subwoofer construction includes polypropylene cones, vented motor structures, poly-cotton spiders with woven tinsel wires, Unimount gasket surrounds, and stamped Vega basket frames. The included XED3001D amplifier uses an aluminum chassis and compact 6.3 x 4.7 x 1.8-inch dimensions.\u003c\/p\u003e\u003cp\u003eInstall the enclosure securely in a trunk, hatch, or cargo area with clearance for the enclosure's 25.9 x 11.8 x 10-inch lower-depth profile and 5.7-inch top depth. The amplifier can accept low-level or high-level signal connections; configure the low-pass filter, subsonic filter, and gain during setup. Cerwin Vega recommends a 4 AWG amplifier wiring kit, and the installation should include appropriate fused battery power, ground, remote-turn-on or signal-sensing setup, and correctly polarized speaker wiring.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970393882787,"sku":"CER-BKX212S","price":249.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/51XLx0EdvvL_f410d4b4-d5fe-4733-baa7-5fc2fbbb6954.jpg?v=1786152468"},{"product_id":"cerwin-vega-cer-vmax12d2","title":"Cerwin Vega VMAX12D2 12\" Dual 2-Ohm Car Subwoofer","description":"\u003cp\u003eThe Cerwin Vega VMAX12D2 is a 12-inch passive car subwoofer designed to add substantial low-frequency output to a vehicle audio system. Its dual 2-ohm voice coils give installers wiring flexibility when matching the subwoofer to a compatible external amplifier. It is suited to custom bass upgrades in cars, trucks, and SUVs where an enclosure and dedicated amplification are part of the system plan.\u003c\/p\u003e\u003cp\u003eWith 1,000 watts RMS power handling and 2,000 watts maximum power handling, the VMAX12D2 is built for systems intended to play at elevated output levels. The 14 mm Xmax specification supports significant cone travel for low-frequency reproduction. Its 29.1 Hz free-air resonance and 12-inch cone area make it a practical choice for bass-focused music systems.\u003c\/p\u003e\u003cp\u003eThe VMAX12D2 uses a treated semi-pressed pulped cone and treated foam surround. These components are supported by an oversized spider and a 3-inch black-coated voice coil intended for higher thermal capability. A shorting ring and Klippel DA-optimized motor and suspension symmetry are part of the subwoofer's motor-system design.\u003c\/p\u003e\u003cp\u003eA heavy-duty cast-aluminum basket provides a rigid foundation for the moving assembly, while the elevated motor structure is designed to support cooling. The single-stacked ferrite motor uses a polished bumped backplate, and the subwoofer is fitted with oversized polished black-chrome terminals. Together, these construction details support use in demanding custom car-audio installations.\u003c\/p\u003e\u003cp\u003eThis model can be installed in either a sealed or ported enclosure, allowing the system to be tailored to the listener's preferred bass character. Its dual 2-ohm coils can be wired in series or parallel, so amplifier load compatibility should be planned before installation. The VMAX12D2 is a component subwoofer and requires a separate amplifier, enclosure, wiring, and installation hardware.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,000W RMS Handling:\u003c\/strong\u003e Supports use with a properly matched high-power subwoofer amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 2-Ohm Voice Coils:\u003c\/strong\u003e Provides series or parallel wiring flexibility for system design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-Inch Woofer:\u003c\/strong\u003e Adds low-frequency output to a dedicated car-audio bass system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e14 mm Xmax:\u003c\/strong\u003e Allows substantial linear cone travel for low-frequency operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCast-Aluminum Basket:\u003c\/strong\u003e Provides a rigid structure for the cone and motor assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling-Focused Motor Design:\u003c\/strong\u003e Elevated motor structure and coated voice coil support thermal management.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe VMAX12D2 combines a black treated semi-pressed pulped cone with a treated foam surround, oversized spider, and industrial-strength cast-aluminum frame. Its ferrite magnet motor includes a shorting ring, polished bumped backplate, and elevated motor structure. Oversized polished black-chrome terminals provide the connection points for the dual voice coils.\u003c\/p\u003e\u003cp\u003ePlan for an 11.02-inch mounting cutout, 5.98-inch mounting depth, and 12.79-inch overall diameter before selecting or building an enclosure. Cerwin Vega documentation supports sealed and ported applications; published enclosure guidance lists 1.25 cubic feet sealed or 1.75 cubic feet ported. Wire the two 2-ohm coils only to an amplifier that is stable at the resulting final impedance, and use a properly configured low-pass crossover and enclosure.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970394439843,"sku":"CER-VMAX12D2","price":151.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61iTGTUHGEL.jpg?v=1786152497"},{"product_id":"cerwin-vega-cer-vmax15d2","title":"Cerwin Vega VMAX15D2 15\" Dual 2-Ohm Subwoofer","description":"\u003cp\u003eThe Cerwin Vega VMAX15D2 is a 15-inch dual 2-ohm car subwoofer designed for systems that need substantial low-frequency output. It is rated for 1,500 watts RMS and 3,000 watts maximum power handling. This model is intended for custom car-audio installations using an external amplifier and enclosure.\u003c\/p\u003e\u003cp\u003eIts dual 2-ohm voice-coil design gives installers flexibility when matching the subwoofer to an amplifier. The coils can be configured for 1-ohm or 4-ohm nominal system wiring, provided the amplifier is stable at the selected load. This makes the VMAX15D2 suitable for single-subwoofer builds where amplifier compatibility is an important consideration.\u003c\/p\u003e\u003cp\u003eThe VMAX15D2 uses a treated semi-pressed pulped cone and treated foam surround to support controlled cone movement. With a listed 14 mm Xmax and 28.87 Hz free-air resonance, it is engineered for bass reproduction in appropriately designed sealed or ported enclosures. Its 87.6 dB sensitivity provides a useful reference when planning amplifier power and system output.\u003c\/p\u003e\u003cp\u003eCerwin Vega equips this subwoofer with a heavy-duty aluminum cast frame, oversized spider, elevated motor structure, and black-coated 3-inch voice coil. The motor includes a shorting ring intended to reduce distortion, while the elevated structure supports cooling. Klippel DA optimization is also specified for motor and suspension symmetry.\u003c\/p\u003e\u003cp\u003eFor enclosure-based upgrades, the manufacturer and retailer specifications identify both sealed and ported applications. A 4.0 cubic-foot sealed enclosure or 5.0 cubic-foot ported enclosure is listed as an optimum starting point. Confirm enclosure net volume, amplifier output, wiring load, and available mounting depth before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,500W RMS Power Handling:\u003c\/strong\u003e Supports high-power car-audio systems when paired with an appropriately matched amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 2-Ohm Voice Coils:\u003c\/strong\u003e Provides 1-ohm or 4-ohm nominal wiring flexibility for compatible amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15-Inch Woofer:\u003c\/strong\u003e Offers large cone area for dedicated low-frequency reproduction in a custom enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Inch Black-Coated Voice Coil:\u003c\/strong\u003e Built for higher thermal capability during demanding use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShorting Ring:\u003c\/strong\u003e Helps reduce distortion as part of the motor design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Cast Frame:\u003c\/strong\u003e Provides a rigid foundation for the motor, cone, and suspension assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe VMAX15D2 combines a heavy industrial-strength aluminum cast frame with a black patterned treated semi-pressed pulped cone, treated foam surround, oversized spider, and polished bumped backplate. Oversized polished black chrome terminals support speaker-wire connections. The elevated motor structure is designed to aid cooling, and the single-stacked magnet motor has a 7.89-inch magnet diameter.\u003c\/p\u003e\u003cp\u003ePlan for a 13.98-inch mounting cutout and at least 7.48 inches of mounting depth, plus room for wiring and enclosure clearance. Cerwin Vega specifies a 4.0 cubic-foot optimum sealed box and 5.0 cubic-foot optimum ported box; enclosure displacement should also be considered. Use an external amplifier matched to the subwoofer's RMS rating and to the final voice-coil wiring load.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970394538147,"sku":"CER-VMAX15D2","price":203.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71j9qjX86VL.jpg?v=1786152498"},{"product_id":"cerwin-vega-cer-vmax8d4","title":"Cerwin Vega VMAX8D4 8\" Dual 4-Ohm Car Subwoofer","description":"\u003cp\u003eThe Cerwin Vega VMAX8D4 is an 8-inch dual 4-ohm car audio subwoofer designed for systems that need substantial bass output in a compact driver size. It is rated for 500 watts RMS and 1,000 watts maximum power handling. Its dual voice coil configuration gives installers wiring flexibility for compatible amplifiers.\u003c\/p\u003e\u003cp\u003eThis subwoofer is intended for drivers building or upgrading a dedicated low-frequency section in a car audio system. Its 15 mm Xmax and 43.6 Hz free-air resonance support controlled cone movement and low-frequency output when used in a properly designed enclosure. The 81.9 dB sensitivity specification reflects a design focused on power handling and system integration rather than a high-efficiency free-air approach.\u003c\/p\u003e\u003cp\u003eA treated semi-pressed pulped cone and treated foam surround form the moving assembly, while an oversized spider helps manage suspension control. The aluminum cast frame provides a rigid mounting structure for the driver. Cerwin Vega also uses a black-coated voice coil for increased thermal capability.\u003c\/p\u003e\u003cp\u003eThe VMAX8D4 uses an elevated motor structure cooling design, a polished bumped backplate, and a shorting ring intended to reduce distortion. Its motor and suspension symmetry are optimized using Klippel DA analysis. These details support more consistent performance when the subwoofer is operated within its rated limits.\u003c\/p\u003e\u003cp\u003eFor enclosure-based installations, the VMAX8D4 can be used in sealed or ported designs. Cerwin Vega's published recommendations list a 0.6 cubic foot sealed enclosure or a 1.0 cubic foot ported enclosure. With a 7.36-inch mounting cutout and 4.80-inch mounting depth, it is suited to custom enclosures with adequate internal clearance.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W RMS Power Handling:\u003c\/strong\u003e Supports amplifier matching for sustained bass performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Provides 2-ohm or 8-ohm final wiring options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15 mm Xmax:\u003c\/strong\u003e Allows substantial linear cone travel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCast Aluminum Frame:\u003c\/strong\u003e Adds rigidity to the subwoofer structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElevated Motor Cooling:\u003c\/strong\u003e Promotes airflow around the motor assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShorting Ring:\u003c\/strong\u003e Helps reduce motor-related distortion.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe VMAX8D4 combines a black treated semi-pressed pulped cone, treated foam surround, oversized spider, and heavy-duty aluminum cast frame. Its elevated motor assembly, black-coated voice coil, polished bumped backplate, and oversized polished black chrome-finished terminals are designed for a durable, serviceable car-audio driver layout.\u003c\/p\u003e\u003cp\u003ePlan for a 7.36-inch cutout, 4.80-inch mounting depth, and 8.74-inch overall diameter before building or selecting an enclosure. Wire both 4-ohm voice coils only to an amplifier that is stable at the resulting final impedance, and use a sealed 0.6 cubic foot or ported 1.0 cubic foot net enclosure as the published starting point. Set amplifier gain carefully and use an appropriate low-pass crossover to integrate the subwoofer with full-range speakers.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970394570915,"sku":"CER-VMAX8D4","price":97.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/51JYSkXSr4L.jpg?v=1786152500"},{"product_id":"cerwin-vega-cer-vpas10v2","title":"Cerwin Vega VPAS10V2 10\" Low-Profile Powered Subwoofer","description":"\u003cp\u003eThe Cerwin Vega VPAS10V2 is a compact 10-inch powered subwoofer designed to add low-frequency support without requiring a separate enclosure and external amplifier. Its low-profile format is intended for locations with limited space, including many under-seat or confined mounting areas. It is a practical upgrade for drivers who want more bass presence from a factory or aftermarket audio system.\u003c\/p\u003e\u003cp\u003eThis active subwoofer combines the woofer, enclosure, and amplifier module in one unit. It supports both RCA low-level and high-level speaker input connections, helping it integrate with a variety of source units. That flexibility makes it suitable for systems with dedicated subwoofer outputs as well as many factory radios without RCA pre-outs.\u003c\/p\u003e\u003cp\u003eThe built-in amplifier is rated at 200 watts RMS and 550 watts maximum. An adjustable low-pass filter helps blend the subwoofer with door or dash speakers, while the selectable phase control can help improve bass integration from the listening position. The adjustable VEGA Bass boost provides additional low-frequency emphasis when used carefully.\u003c\/p\u003e\u003cp\u003eA cast-aluminum enclosure serves as the unit's housing and heat-dissipation structure. The VPAS10V2 also uses a PWM MOSFET power supply and thermal-protection circuitry. Soft delayed remote turn-on is included to support controlled startup with compatible vehicle audio systems.\u003c\/p\u003e\u003cp\u003eThe included remote level knob allows the subwoofer output to be adjusted from an accessible driver location. Its high-level input and auto-power-on capability can simplify installation with compatible OEM systems. For aftermarket systems, the RCA input and remote turn-on connection provide a conventional powered-subwoofer setup.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Amplifier:\u003c\/strong\u003e Combines amplification and bass reproduction in one enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200W RMS Output:\u003c\/strong\u003e Provides continuous power for the built-in 10-inch subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRCA And High-Level Inputs:\u003c\/strong\u003e Supports aftermarket and many factory audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Low-Pass Filter:\u003c\/strong\u003e Helps match bass output to the main speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Level Knob:\u003c\/strong\u003e Allows convenient subwoofer-level adjustment from the cabin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCast-Aluminum Enclosure:\u003c\/strong\u003e Provides a compact housing with heat-dissipation capability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe VPAS10V2 uses a low-profile rectangular enclosure constructed from cast aluminum. Its integrated amplifier module, 10-inch subwoofer, and enclosure are packaged together to reduce the number of separate components required for a bass upgrade. The unit measures 13.6 inches long, 9.6 inches wide, and 2.6 inches high.\u003c\/p\u003e\u003cp\u003eMount the subwoofer securely in a location with adequate ventilation and verify clearance before installation. Connect it to the vehicle's 12-volt electrical system with a properly fused power connection and solid chassis ground, then use either RCA or high-level audio inputs as appropriate. Set gain, low-pass filter, bass boost, and phase after installation to blend the bass with the rest of the system.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970394603683,"sku":"CER-VPAS10V2","price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/81UpCPbjI9L_5ea89e80-bc3d-4cfe-9e03-bad1c2d81733.jpg?v=1786152503"},{"product_id":"cerwin-vega-cer-vpstx12","title":"Cerwin Vega VPSTX12 12\" Powered Spare Tire Subwoofer","description":"\u003cp\u003eThe Cerwin Vega VPSTX12 is a 12-inch powered subwoofer designed to install in a vehicle's spare-tire well. It adds low-frequency support without requiring a conventional trunk-mounted subwoofer enclosure. Its shallow, round form factor is intended for drivers who want to preserve usable cargo space.\u003c\/p\u003e\u003cp\u003eThis all-in-one system combines a 12-inch subwoofer, sealed enclosure, and integrated amplifier in one assembly. The amplifier is rated at 150 watts RMS and 600 watts maximum, with a 2-ohm final impedance. It is suited to filling in bass response for factory or aftermarket car-audio systems.\u003c\/p\u003e\u003cp\u003eThe VPSTX12 is specified for a 20 Hz to 150 Hz frequency response and includes an adjustable 50 Hz to 150 Hz low-pass filter. A variable bass boost and selectable phase setting help tailor its low-frequency output to the vehicle and system. A fixed 20 Hz subsonic filter is also included.\u003c\/p\u003e\u003cp\u003eLow-level RCA and speaker-level input options allow the subwoofer to connect with different head-unit configurations. When speaker-level input is used, the unit has an automatic turn-on circuit if a switched 12-volt turn-on lead is unavailable. A wired remote bass knob is included for convenient level adjustment from the cabin.\u003c\/p\u003e\u003cp\u003eThe shallow spare-tire application is designed around a 14.2-inch outside diameter and 4.7-inch overall height. It can be mounted in spare tires oriented deep-side down, while some deep-side-up spare tires may need to be flipped over first. The supplied 8 mm and 10 mm mounting bolts support installation in many vehicle spare-tire wells.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpare-Tire-Well Design:\u003c\/strong\u003e Uses the spare-tire area to help retain trunk and cargo space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Amplifier:\u003c\/strong\u003e Combines the amplifier and subwoofer in one compact powered assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150W RMS Output:\u003c\/strong\u003e Provides a continuous-power rating suitable for bass reinforcement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Inputs:\u003c\/strong\u003e Supports RCA low-level and speaker-level source connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Low-Pass Filter:\u003c\/strong\u003e Lets you set the upper bass cutoff from 50 Hz to 150 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Bass Knob:\u003c\/strong\u003e Provides in-cabin adjustment of subwoofer level.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe VPSTX12 uses a shallow sealed spare-tire enclosure with a cast-aluminum exterior and integrated heatsink. Its 12-inch driver uses a polypropylene cone, rubber surround, and ferrite magnet motor structure. The enclosure measures 14.2 inches by 14.2 inches by 4.7 inches, with a 12.6-inch mounting diameter.\u003c\/p\u003e\u003cp\u003eConfirm spare-tire-well clearance, mounting-bolt fitment, and tire orientation before purchase. The unit accepts RCA low-level or speaker-level input, but the manufacturer instructs users not to connect both input types at the same time. A high-quality power kit is required separately; the manual specifies 8 AWG battery power wire and cautions against using CCA wiring kits.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970394669219,"sku":"CER-VPSTX12","price":315.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61DM7tqzxuL.jpg?v=1786152506"},{"product_id":"cerwin-vega-cer-vmax10d4","title":"Cerwin-Vega CER-VMAX10D4 10\" DVC Car Subwoofer","description":"\u003cp\u003eThe Cerwin-Vega VMAX10D4 is a 10-inch dual-voice-coil car subwoofer for adding dedicated low-frequency output to a vehicle audio system. It is a passive driver, so it is intended for use with a separate compatible amplifier and subwoofer enclosure. Its dual 4-ohm coils provide wiring flexibility for system planning.\u003c\/p\u003e\u003cp\u003eWith an 800-watt RMS power rating and 1,600-watt maximum rating, this subwoofer is designed for systems that need substantial bass capacity from a 10-inch driver. The 15 mm Xmax specification supports meaningful cone travel for low-frequency reproduction. Its 84.4 dB sensitivity and 36.9 Hz free-air resonance are useful reference points when matching the driver and enclosure to the desired response.\u003c\/p\u003e\u003cp\u003eThe VMAX10D4 uses a treated semi-pressed pulped-paper cone, treated-foam surround, and oversized spider. These components support controlled movement while the motor system is engineered for high-excursion operation. A shorting ring and Klippel DA optimized motor and suspension symmetry are included to support lower distortion and consistent operation.\u003c\/p\u003e\u003cp\u003eIts cast-aluminum basket provides a rigid foundation for the driver assembly, while the elevated motor structure is designed to aid cooling. The black-coated voice coil is intended to improve thermal capability during higher-power use. Oversized polished black-chrome terminals provide connection points for the two voice coils.\u003c\/p\u003e\u003cp\u003eThis subwoofer can be installed in either a sealed or ported enclosure according to the manufacturer’s enclosure guidance. A sealed design is suited to a compact, controlled-bass system, while the recommended ported design provides a larger enclosure option with a slot port. It is a practical choice for a custom car-audio bass upgrade when amplifier impedance, enclosure volume, and vehicle space are planned together.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e800W RMS Handling:\u003c\/strong\u003e Supports higher-output bass systems when paired with an appropriately rated amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Allows 2-ohm parallel or 8-ohm series wiring configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15 mm Xmax:\u003c\/strong\u003e Provides capacity for extended cone movement at low frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCast-Aluminum Basket:\u003c\/strong\u003e Adds a rigid platform for the moving assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShorting Ring:\u003c\/strong\u003e Helps reduce distortion from the motor system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElevated Motor Cooling:\u003c\/strong\u003e Supports heat management during demanding operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe VMAX10D4 combines a treated paper cone, treated-foam surround, oversized spider, and heavy-duty cast-aluminum frame. Its ferrite motor uses a polished bumped backplate, black-coated voice coil, and elevated cooling-oriented structure. The 10-inch driver has an 11.06-inch overall diameter and a 6.89-inch magnet diameter.\u003c\/p\u003e\u003cp\u003eConfirm a 9.47-inch mounting cutout and at least 5.39 inches of mounting depth before installation. The manufacturer recommends a 1.0 cu. ft. net sealed enclosure or a 1.25 cu. ft. net ported enclosure, both calculated with 3\/4-inch MDF. Match the amplifier to the final 2-ohm or 8-ohm coil wiring load, and use a subsonic filter of at least 30 Hz with the recommended vented enclosure.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970394865827,"sku":"CER-VMAX10D4","price":129.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/618l0D8BB2L.jpg?v=1786152517"},{"product_id":"cerwin-vega-cer-cvm0","title":"Cerwin-Vega CVM0 Digital Bass Enhancer","description":"\u003cp\u003eThe Cerwin-Vega CVM0 is a car-audio bass processor designed to restore and shape low-frequency content before it reaches downstream audio components. It is intended for systems that need more control over sub-bass impact than a head unit or amplifier gain control alone can provide. The CVM0 connects at line level and is designed to work with compatible crossovers, equalizers, and amplifiers.\u003c\/p\u003e\u003cp\u003eIts Bass Driver circuit recreates and injects low-frequency information into the signal path, while the bass equalization circuit contours the processed bass response. Sweep and Width controls let the installer select the bass center frequency and the range of frequencies affected. This makes the processor suited to tuning bass response around the vehicle, speaker placement, and enclosure characteristics.\u003c\/p\u003e\u003cp\u003eThe CVM0 uses balanced-input circuitry to help minimize induced noise and accepts signals up to 15V RMS. Its RCA outputs feed the next component in the signal chain, such as an equalizer, crossover, or amplifier. Cerwin-Vega specifies installing the CVM0 before a crossover in the system layout.\u003c\/p\u003e\u003cp\u003eA dash-mount remote control is included for adjusting bass level from the driver's seat. The remote has an LED that brightens as bass is increased, while three LEDs on the processor indicate bass-maximizer activity. These controls support practical adjustment for different recordings without needing to access the main chassis.\u003c\/p\u003e\u003cp\u003eThe built-in PFM subsonic filter offers selectable 35Hz, 50Hz, and 80Hz settings for tailoring very-low-frequency filtering. Bass-output jumpers provide four output-setting options, allowing the processor to be configured around the rest of the system. It is a focused upgrade for car-audio systems using RCA-level source and amplifier connections.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBass Driver Circuit:\u003c\/strong\u003e Restores and injects low-frequency information into the audio signal path.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBass Equalization:\u003c\/strong\u003e Shapes processed bass to better suit the installed speaker system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSweep And Width Controls:\u003c\/strong\u003e Adjust the bass center frequency and affected frequency range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePFM Subsonic Filter:\u003c\/strong\u003e Selectable 35Hz, 50Hz, or 80Hz filtering supports system tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDash-Mount Remote:\u003c\/strong\u003e Lets the driver adjust bass level from the listening position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced RCA Inputs:\u003c\/strong\u003e Help minimize induced noise while accepting high-level preamp signals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVM0 is a compact processor chassis with front-panel Sweep and Width controls, bass-maximizer LEDs, a power-on LED, RCA signal connections, and a three-terminal power connector. Its rear-panel configuration includes input-grounding, ground-isolation, and bass-output-control jumpers. The included wired dash remote provides a separate bass-level knob and LED indication.\u003c\/p\u003e\u003cp\u003eInstall the CVM0 in an accessible, secure location and connect it using RCA-level signal cables. Connect its RCA outputs to the next component after the processor; Cerwin-Vega specifies placing the unit before a crossover. Wire B+ to a 12V source, connect the remote lead to a 12V DC turn-on lead, ground the unit to the vehicle chassis, and use the recommended 1A fuse rating.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970394964131,"sku":"CER-CVM0","price":43.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/519zpD3-VuL.jpg?v=1786152523"},{"product_id":"cerwin-vega-cer-cvp10s4","title":"Cerwin-Vega CVP10S4 10\" 4-Ohm Subwoofer","description":"\u003cp\u003eThe Cerwin-Vega CVP10S4 is a 10-inch passive car subwoofer designed to add dedicated low-frequency output to an aftermarket vehicle audio system. Its single 4-ohm voice coil provides a straightforward load for a compatible amplifier. It is intended for drivers who want to build or refresh a bass system with a separate subwoofer and enclosure.\u003c\/p\u003e\u003cp\u003eWith 150 watts RMS and 450 watts maximum power handling, the CVP10S4 is suited to amplifier matching based on continuous power rather than peak ratings. Its 87.1 dB sensitivity and 8 mm one-way Xmax support responsive bass performance within its operating limits. The 10-inch format can be a practical option where enclosure space is more limited than a larger subwoofer installation.\u003c\/p\u003e\u003cp\u003eA polypropylene cone and treated foam surround form the moving assembly. The surround uses a dual-stitched connection and ribbed design intended to support cone movement. A structure-reinforcing dust cap is also used as part of the driver assembly.\u003c\/p\u003e\u003cp\u003eThe CVP10S4 uses a ferrite magnet motor, stamped-steel basket, and perimeter-vented voice-coil design. Its bumped backplate is engineered to allow increased excursion, while the venting supports heat dissipation. Large-gauge spring terminals simplify connection of speaker wire during installation.\u003c\/p\u003e\u003cp\u003eThis subwoofer can be used in sealed or ported enclosures, allowing the system design to be tailored to available space and listening goals. A sealed enclosure is commonly selected for a more compact installation, while a ported enclosure changes the system's output character. Confirm enclosure dimensions, amplifier capability, and vehicle clearances before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Subwoofer:\u003c\/strong\u003e Adds dedicated bass without requiring a larger driver format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 4-Ohm Voice Coil:\u003c\/strong\u003e Provides simple amplifier and wiring compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150W RMS Handling:\u003c\/strong\u003e Supports appropriate continuous-power amplifier matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Uses a light, rigid cone material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerimeter Voice-Coil Venting:\u003c\/strong\u003e Helps dissipate heat during operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped-Steel Basket:\u003c\/strong\u003e Provides a stable mounting structure for the driver.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVP10S4 combines a polypropylene cone, treated foam surround, ferrite magnet, and CAD-optimized stamped-steel basket. Its dual-stitched, ribbed surround and structure-reinforcing dust cap are part of the driver design. The subwoofer uses large-gauge spring terminals for speaker-wire connections.\u003c\/p\u003e\u003cp\u003ePlan for a 236 mm mounting diameter, 253 mm hole diameter, and 134 mm mounting depth when designing the enclosure and checking vehicle clearance. Pair the subwoofer with an external amplifier compatible with a 4-ohm single-voice-coil load and size the amplifier around its 150-watt RMS rating. Use it in a properly designed sealed or ported enclosure; an enclosure and amplifier are required for operation.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970395160739,"sku":"CER-CVP10S4","price":43.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71ht2GpUokL.jpg?v=1786152531"},{"product_id":"cerwin-vega-cer-cvp12s4","title":"Cerwin-Vega CVP12S4 12\" 4-Ohm SVC Subwoofer","description":"\u003cp\u003eThe Cerwin-Vega CVP12S4 is a 12-inch passive car subwoofer designed to add low-frequency output to a factory-system upgrade or custom audio build. Its single 4-ohm voice coil provides a straightforward load for matching with a compatible external amplifier. It is intended for listeners who want a dedicated bass driver without moving to a dual-voice-coil wiring configuration.\u003c\/p\u003e\u003cp\u003eRated at 200 watts RMS and 550 watts maximum, the CVP12S4 is built for systems that need controlled low-end reinforcement. Its 86.8 dB sensitivity and 28.4 Hz resonant frequency support bass-focused enclosure designs. The 8 mm one-way Xmax specification indicates capacity for substantial cone travel within its rated operating range.\u003c\/p\u003e\u003cp\u003eA light, rigid poly cone handles bass reproduction while a treated foam surround supports cone movement. The surround is dual stitched to the cone and uses a ribbed profile intended to help it retain its shape under higher output. A reinforcing dust cap is used as part of the driver structure.\u003c\/p\u003e\u003cp\u003eThe motor and frame design focus on cooling and stability. Perimeter venting at the voice coil is specified to assist heat dissipation, while a bumped backplate supports increased excursion. The driver is built on a CAD-optimized stamped-steel basket.\u003c\/p\u003e\u003cp\u003eThe CVP12S4 can be used in either sealed or ported enclosures, allowing a system to be tailored for more controlled bass or greater low-frequency output. Its 4-ohm single-coil layout makes amplifier selection and wiring relatively direct. Use the published mounting dimensions when choosing an enclosure, baffle, and installation location.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-Inch Subwoofer:\u003c\/strong\u003e Adds a dedicated low-frequency driver to a car audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 4-Ohm Voice Coil:\u003c\/strong\u003e Provides a simple nominal impedance load for amplifier matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200W RMS Rating:\u003c\/strong\u003e Supports continuous-power amplifier matching at its rated level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoly Cone:\u003c\/strong\u003e Combines low mass and rigidity for bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreated Foam Surround:\u003c\/strong\u003e Supports cone travel and is dual stitched for attachment reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented Motor Design:\u003c\/strong\u003e Perimeter voice-coil venting helps manage heat during operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVP12S4 uses a polypropylene cone, treated foam surround, reinforcing dust cap, and stamped-steel basket. Its ribbed, dual-stitched surround and bumped backplate are designed to support cone movement. Large-gauge spring terminals provide the speaker-wire connection points.\u003c\/p\u003e\u003cp\u003eMount the subwoofer in an enclosure designed for a 12-inch driver and follow the 301 mm cutout and 151 mm mounting-depth specifications. The manufacturer identifies the driver as compatible with sealed and ported enclosures; choose the enclosure type according to the system goal. Pair it with an external amplifier that is stable at a 4-ohm load and set amplifier gain conservatively.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970395193507,"sku":"CER-CVP12S4","price":49.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71ht2GpUokL_c3fc7e3c-a3ad-471c-8689-882a2cad59b4.jpg?v=1786152533"},{"product_id":"cerwin-vega-cer-h15dv2","title":"Cerwin-Vega H15DV2 15\" Dual 2-Ohm Car Subwoofer","description":"\u003cp\u003eThe Cerwin-Vega H15DV2 is a 15-inch HED Series car audio subwoofer designed to add low-frequency output to a custom vehicle sound system. Its dual 2-ohm voice coils provide wiring flexibility for matching the subwoofer to a compatible mono amplifier. It is a passive subwoofer, so it requires an external amplifier and an enclosure.\u003c\/p\u003e\u003cp\u003eThis model is suited to listeners building a bass-focused system who have room for a full-size 15-inch driver and enclosure. Its 750-watt RMS power rating supports use in systems designed for substantial continuous bass output. The 25 Hz free-air resonance and 11 mm Xmax support low-frequency extension when used with an appropriate enclosure.\u003c\/p\u003e\u003cp\u003eThe H15DV2 uses a 4-inch voice coil, ferrite motor structure, and dual voice-coil layout. These elements are intended to support power handling and give installers impedance options. With both 2-ohm coils connected, it can be wired for either a 1-ohm parallel load or a 4-ohm series load.\u003c\/p\u003e\u003cp\u003eA polypropylene cone and treated foam surround form the moving assembly, while the stamped-steel basket provides the mounting structure. The driver has a sensitivity rating of 86 dB at 1 watt\/1 meter. Its published Thiele\/Small parameters can help an experienced installer or enclosure builder plan a system around the subwoofer.\u003c\/p\u003e\u003cp\u003eThe H15DV2 can be used in either sealed or ported enclosures, allowing the system to be tailored to installation space and listening preferences. A sealed design is commonly selected for a more compact enclosure approach, while a ported design is commonly used when enclosure volume and tuning are planned for greater low-frequency output. Confirm amplifier stability, enclosure dimensions, and vehicle clearance before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e15-Inch HED Subwoofer:\u003c\/strong\u003e Provides a large cone area for a bass-focused car audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 2-Ohm Voice Coils:\u003c\/strong\u003e Supports 1-ohm parallel or 4-ohm series wiring configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e750W RMS Power Handling:\u003c\/strong\u003e Matches with an amplifier sized for 750 watts RMS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Inch Voice Coil:\u003c\/strong\u003e Supports the driver's published continuous power capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFerrite Motor:\u003c\/strong\u003e Provides the magnetic motor structure for the woofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Or Ported Compatibility:\u003c\/strong\u003e Allows enclosure selection based on system goals and available space.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H15DV2 combines a polypropylene cone, treated foam surround, ferrite magnet, and stamped-steel basket. Its published overall diameter is 15.63 inches, and its overall height is 8.39 inches. The 4-inch voice coil and 11 mm maximum linear excursion specification are part of its bass-driver design.\u003c\/p\u003e\u003cp\u003eAllow for a 13.94-inch cutout and at least 7.66 inches of mounting depth, plus clearance for terminals and enclosure construction. Connect both voice coils and select series or parallel wiring only when the connected amplifier is stable at the resulting load. Use the published parameters when designing a sealed or ported enclosure, and secure the driver with appropriate mounting hardware.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970395619491,"sku":"CER-H15DV2","price":146.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71FKwaH7J3L_f17fbcbf-d70e-4f18-8bb5-59abad922a4f.jpg?v=1786152552"},{"product_id":"cerwin-vega-cer-h15dv4","title":"Cerwin-Vega H15DV4 15\" Dual 4-Ohm Subwoofer","description":"\u003cp\u003eThe Cerwin-Vega H15DV4 is a 15-inch HED Series car audio subwoofer designed to add substantial low-frequency output to a custom vehicle sound system. Its dual 4-ohm voice coils provide wiring flexibility for matching a compatible mono or multi-channel amplifier. It is intended for listeners building a dedicated bass system rather than relying on factory speakers alone.\u003c\/p\u003e\u003cp\u003eWith a 750-watt RMS power rating and 2,250-watt maximum rating, the H15DV4 is suited to systems that need a large-diameter woofer with meaningful power capability. Its 15-inch cone area helps move air for weighty bass reproduction. The 27 Hz resonant frequency supports low-frequency extension when the driver is used in a properly designed enclosure.\u003c\/p\u003e\u003cp\u003eThe subwoofer uses a hybrid polypropylene and treated paper cone to balance rigidity and responsiveness. A stitch-reinforced treated TPE foam surround is designed to support extended cone travel, while the ferrite motor structure supplies the magnetic force needed for controlled operation. This combination gives the H15DV4 a bass-forward character appropriate for high-output car audio builds.\u003c\/p\u003e\u003cp\u003eDual 4-ohm coils allow the H15DV4 to be wired for either a 2-ohm parallel load or an 8-ohm series load. Both voice coils should be connected to an amplification source, and the amplifier must be stable at the final impedance. This makes the subwoofer useful for installers tailoring a system around an amplifier's rated load capability.\u003c\/p\u003e\u003cp\u003eThe H15DV4 can be installed in either a sealed or ported subwoofer enclosure. A sealed design is suited to controlled bass response, while a ported enclosure can emphasize output when designed for the driver. Its 7.66-inch mounting depth and 13.94-inch cutout requirement should be checked carefully before selecting an enclosure or mounting location.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e15-Inch HED Woofer:\u003c\/strong\u003e Large cone area supports strong low-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Coils:\u003c\/strong\u003e Supports 2-ohm parallel or 8-ohm series wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e750W RMS Handling:\u003c\/strong\u003e Matches with appropriately rated external amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid Cone:\u003c\/strong\u003e Polypropylene and treated paper balance strength and response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReinforced Foam Surround:\u003c\/strong\u003e Supports excursion while maintaining cone support.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Or Ported Use:\u003c\/strong\u003e Works with either enclosure approach.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H15DV4 is built around a stamped-steel basket, ferrite ceramic magnet, hybrid cone, and treated foam surround. Its 4-inch voice coil diameter and 11 mm Xmax are part of a design intended for substantial excursion and power handling. The overall driver diameter is 15.63 inches, with an overall height of 8.39 inches.\u003c\/p\u003e\u003cp\u003ePlan the installation around the 13.94-inch cutout diameter and 7.66-inch mounting depth, leaving adequate clearance behind the motor structure. Wire both 4-ohm voice coils with correct polarity and choose either series or parallel wiring only if the amplifier supports the resulting 8-ohm or 2-ohm load. Use a securely mounted sealed or ported enclosure, protect wiring from sharp edges, and use grommets where wires pass through drilled metal openings.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970395652259,"sku":"CER-H15DV4","price":146.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71FKwaH7J3L.jpg?v=1786152554"},{"product_id":"cerwin-vega-cer-h6e10dv","title":"Cerwin-Vega H6E10DV Dual 10\" Vented Subwoofer Enclosure","description":"\u003cp\u003eThe Cerwin-Vega H6E10DV is a loaded passive subwoofer enclosure built around two 10-inch HED Series subwoofers. It gives a car audio system a dedicated low-frequency foundation without requiring the buyer to select an enclosure and separate woofers. The preloaded design is intended for drivers who want a straightforward bass upgrade from a single enclosure.\u003c\/p\u003e\u003cp\u003eThis enclosure is suited to listeners who want more bass presence for daily driving and bass-forward music. Its dual-subwoofer layout provides greater cone area than a single 10-inch enclosure. The finished assembly keeps the system focused on low-frequency reproduction while leaving the main speakers to handle mids and highs.\u003c\/p\u003e\u003cp\u003eThe H6E10DV uses a factory-tuned vented enclosure, a design that uses a port to support efficient low-frequency output. Cerwin-Vega rates the complete enclosure for 500 watts RMS and 2,000 watts maximum power handling. Its final wired impedance is 2 ohms, so amplifier compatibility should be confirmed before installation.\u003c\/p\u003e\u003cp\u003eEach subwoofer uses a polypropylene cone with a treated-foam surround, stamped-steel basket, ferrite magnet, and 2-inch voice coil. The stated frequency response is 20 Hz to 500 Hz. These material choices are paired with a 3\/4-inch MDF enclosure to provide a substantial platform for the loaded drivers.\u003c\/p\u003e\u003cp\u003eThe H6E10DV is a passive enclosure rather than a powered subwoofer, so it requires a separate external car amplifier and appropriate wiring. It can be used with an aftermarket receiver or a factory-audio integration setup that provides a suitable amplifier signal path. With its 30-inch length, check available cargo-area space before purchasing.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 10-Inch Drivers:\u003c\/strong\u003e Two HED Series subwoofers are preinstalled in one enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W RMS Handling:\u003c\/strong\u003e Supports substantial continuous amplifier power when properly matched.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Final Impedance:\u003c\/strong\u003e Designed for an amplifier stable at a 2-ohm load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented MDF Enclosure:\u003c\/strong\u003e Factory-tuned ported construction supports efficient bass output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cones:\u003c\/strong\u003e Durable cone material paired with treated-foam surrounds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtective Grille:\u003c\/strong\u003e Includes a grille to help protect the subwoofer area.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe enclosure uses 3\/4-inch medium-density fiberboard with a black carpet exterior. It has a rectangular form factor, factory-embroidered Cerwin-Vega Mobile branding, and a protective grille. The internal subwoofers use stamped-steel baskets and ferrite ceramic magnets.\u003c\/p\u003e\u003cp\u003eMount the enclosure securely in the vehicle cargo area so it cannot move during driving or high-output playback. Connect its single binding-post terminal to a compatible external amplifier, and verify that the amplifier is stable at the enclosure's 2-ohm final impedance. Measure the planned location against the 30-inch long by 13-inch high by 13-inch wide enclosure dimensions before installation.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970396373155,"sku":"CER-H6E10DV","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71UXcFiip7L.jpg?v=1786152582"},{"product_id":"cerwin-vega-cer-v10dv2","title":"Cerwin-Vega V10DV2 10\" Dual 2-Ohm Voice Coil Subwoofer","description":"\u003cp\u003eThe Cerwin-Vega V10DV2 is a 10-inch car audio subwoofer designed to add dedicated low-frequency output to an upgraded vehicle sound system. Its dual 2-ohm voice coil configuration provides wiring flexibility for compatible mono or multi-channel amplifiers. It is intended for listeners building a bass-focused system rather than relying on factory full-range speakers for low-end reproduction.\u003c\/p\u003e\u003cp\u003eWith a 1,000-watt RMS power rating and 3,000-watt maximum rating, the V10DV2 is built for systems using substantial amplifier power. Its 85 dB sensitivity and 45 Hz free-air resonance describe a subwoofer engineered around controlled bass reproduction in an appropriately designed enclosure. Proper gain setting and amplifier load compatibility remain important for reliable operation.\u003c\/p\u003e\u003cp\u003eThe V10DV2 uses a hybrid carbon fiber and polypropylene cone with a stitch-reinforced Santoprene surround. This combination is designed to keep the moving assembly stable while accommodating bass excursion. A ferrite motor structure supplies the magnetic drive behind the woofer.\u003c\/p\u003e\u003cp\u003eA vented pole piece supports heat management during extended playback, while the 3-inch voice coil is sized for high-power use. The subwoofer also uses a single terminal impedance selector to simplify connection of its dual voice coils. When wired in parallel, its dual 2-ohm coils present a 1-ohm load; series wiring presents a 4-ohm load.\u003c\/p\u003e\u003cp\u003eThis subwoofer fits custom sealed or ported car audio builds when the enclosure and amplifier are selected for the vehicle and desired output. Its 5.94-inch mounting depth and 9.17-inch cutout requirement should be checked before installation. It can serve as a single-subwoofer upgrade or as part of a multi-subwoofer system with appropriate impedance planning.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 2-Ohm Voice Coils:\u003c\/strong\u003e Supports 1-ohm parallel or 4-ohm series wiring configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,000W RMS Handling:\u003c\/strong\u003e Accommodates high-power amplification when configured and tuned correctly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid Cone Construction:\u003c\/strong\u003e Carbon fiber and polypropylene construction supports stable cone movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSantoprene Surround:\u003c\/strong\u003e Stitch-reinforced surround supports excursion and long-term durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented Pole Piece:\u003c\/strong\u003e Helps manage heat during extended high-output playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle Terminal Selector:\u003c\/strong\u003e Simplifies access to the dual-voice-coil wiring configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe V10DV2 combines a cast aluminum basket, ferrite magnet structure, polypropylene-based cone construction, and Santoprene surround. Its 3-inch voice coil, vented pole piece, and concealed mounting gasket are part of a design focused on high-power car audio use. The overall diameter is 10.89 inches, with an overall height of 6.69 inches.\u003c\/p\u003e\u003cp\u003eConfirm available mounting space before cutting, using the 9.17-inch cutout diameter and 5.94-inch mounting-depth requirements. Both voice coils must be connected to an amplifier, and the amplifier must be stable at the final wired impedance. Use a properly designed subwoofer enclosure and set amplifier gain conservatively to avoid speaker damage.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970397061283,"sku":"CER-V10DV2","price":146.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71kJ1wVBhfL.jpg?v=1786152613"},{"product_id":"cerwin-vega-cer-v12dv2","title":"Cerwin-Vega V12DV2 12\" Dual 2-Ohm Subwoofer","description":"\u003cp\u003eThe Cerwin-Vega V12DV2 is a 12-inch VEGA Series car audio subwoofer designed for systems that need substantial low-frequency output. Its dual 2-ohm voice-coil configuration gives installers useful flexibility when matching the subwoofer to a compatible amplifier. It is a passive subwoofer, so it requires an external amplifier and enclosure for operation.\u003c\/p\u003e\u003cp\u003eThis model is intended for enthusiasts upgrading a factory-based system or building a dedicated bass section in a custom car audio installation. With 1,200 watts RMS and 3,600 watts maximum power handling, it is suited to amplifier systems selected around its continuous power rating. The 87 dB sensitivity and 36 Hz resonant frequency provide useful reference points for enclosure and system planning.\u003c\/p\u003e\u003cp\u003eThe V12DV2 uses a hybrid carbon-fiber and polypropylene cone with a stitch-reinforced Santoprene surround. This construction is intended to support cone rigidity while allowing the suspension to move through its rated 9 mm Xmax. A vented pole piece helps manage heat during extended use.\u003c\/p\u003e\u003cp\u003eA ferrite motor structure, double-stacked magnet assembly, and 3-inch high-temperature copper voice coil form the core of the woofer’s motor system. The cast aluminum Vega basket supports the moving assembly, while the horizontal spring-loaded terminal is designed to simplify speaker-wire connections. An integrated impedance selector is also provided as part of the terminal arrangement.\u003c\/p\u003e\u003cp\u003eFor a system build, the V12DV2 can be used in either a sealed or ported enclosure. Published optimum enclosure volumes are 1.25 cubic feet sealed and 1.75 cubic feet ported. Its dual 2-ohm coils can be wired for a 1-ohm parallel load or a 4-ohm series load, provided the amplifier is rated for the selected load.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 2-Ohm Voice Coils:\u003c\/strong\u003e Supports 1-ohm parallel or 4-ohm series wiring configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,200W RMS Handling:\u003c\/strong\u003e Provides a continuous-power target for amplifier matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid Cone Construction:\u003c\/strong\u003e Carbon fiber and polypropylene combine rigidity with responsive movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSantoprene Surround:\u003c\/strong\u003e Stitch-reinforced surround supports controlled cone travel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented Pole Piece:\u003c\/strong\u003e Helps dissipate heat during extended playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCast Aluminum Basket:\u003c\/strong\u003e Provides a rigid foundation for the woofer assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe V12DV2 combines a black carbon-fiber\/polypropylene diaphragm, Santoprene rubber surround, cast aluminum basket, and ferrite magnet motor. Its 3-inch copper voice coil and double-stacked magnet structure are engineered for high-power car audio applications. The deep basket profile requires adequate enclosure clearance before installation.\u003c\/p\u003e\u003cp\u003ePlan for a 11.02-inch cutout and 6.57-inch mounting depth, with an overall diameter of 12.66 inches and overall height of 7.36 inches. Use an enclosure designed for the subwoofer and match the amplifier to the final 1-ohm or 4-ohm load created by the dual coils. Both voice coils should be connected to the amplification source, and the amplifier must be rated for the selected impedance.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970397094051,"sku":"CER-V12DV2","price":172.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71kJ1wVBhfL_6ca64ca7-3599-45f3-a01c-fc6f80865dab.jpg?v=1786152615"},{"product_id":"cerwin-vega-cer-v12dv4","title":"Cerwin-Vega V12DV4 12\" Dual 4-Ohm Voice Coil Subwoofer","description":"\u003cp\u003eThe Cerwin-Vega V12DV4 is a 12-inch VEGA Series car subwoofer designed for dedicated low-frequency reproduction in an aftermarket audio system. Its dual 4-ohm voice-coil design gives system builders flexibility when matching the subwoofer to a compatible amplifier. It is intended for listeners building a bass-focused upgrade rather than replacing full-range door speakers.\u003c\/p\u003e\u003cp\u003eWith a 1,200-watt RMS power rating and 3,600-watt maximum power rating, the V12DV4 is built for systems that use a properly matched external amplifier. Its 87 dB sensitivity and 38 Hz free-air resonance support substantial low-frequency output when installed in an appropriate enclosure. The 9 mm Xmax specification indicates designed linear cone travel for bass reproduction.\u003c\/p\u003e\u003cp\u003eThe diaphragm combines carbon fiber and polypropylene materials, using a parabolic one-piece cone design. This construction is paired with a stitch-reinforced Santoprene surround to support repeated cone movement. Together, these components are designed to balance cone rigidity, durability, and controlled bass response.\u003c\/p\u003e\u003cp\u003eA ferrite motor structure provides the magnetic drive for the 3-inch dual voice coils. The V12DV4 also uses a vented pole piece to help manage heat during extended use. Its integrated impedance selector and single terminal connection simplify connection of the dual voice coils.\u003c\/p\u003e\u003cp\u003eThis subwoofer fits naturally into a custom sealed or ported bass system with sufficient mounting clearance and amplifier capacity. It can be used as a single subwoofer or combined with matching units where the amplifier and final impedance are correctly planned. Verify enclosure design, amplifier stability, electrical capacity, and available cargo-space clearance before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,200W RMS Handling:\u003c\/strong\u003e Supports use with a properly matched high-power external amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Provides configuration flexibility for compatible amplifier systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon Fiber\/Polypropylene Cone:\u003c\/strong\u003e Combines lightweight response with a rigid diaphragm structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSantoprene Surround:\u003c\/strong\u003e Stitch-reinforced surround supports repeated excursion and long-term durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFerrite Motor Structure:\u003c\/strong\u003e Supplies the magnetic force needed for controlled bass output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Impedance Selector:\u003c\/strong\u003e Simplifies connection through the subwoofer's single terminal arrangement.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe V12DV4 uses a cast aluminum basket, ferrite magnet structure, hybrid carbon fiber\/polypropylene diaphragm, and Santoprene surround. A concealed mounting gasket contributes to a clean installed appearance, while the deep-drawn Vega basket supports the driver assembly. The subwoofer has a 12.66-inch overall diameter and 7.36-inch overall height.\u003c\/p\u003e\u003cp\u003ePlan for an 11.02-inch cutout and 6.57 inches of mounting depth, plus clearance behind the motor structure and around the terminals. Use a rigid, correctly designed enclosure and an amplifier that is stable at the selected final load. Set gains carefully and use appropriate crossover and subsonic filtering for the enclosure type and system design.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970397126819,"sku":"CER-V12DV4","price":180.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71kJ1wVBhfL_4146fedf-aaa9-40be-a42b-77732867c379.jpg?v=1786152617"},{"product_id":"cerwin-vega-cer-v15dv2","title":"Cerwin-Vega V15DV2 15\" Dual 2-Ohm Subwoofer","description":"\u003cp\u003eThe Cerwin-Vega V15DV2 is a 15-inch VEGA Series car audio subwoofer designed for systems that need substantial low-frequency output. Its dual 2-ohm voice-coil design provides configuration flexibility when matching the subwoofer to a compatible amplifier. It is intended for custom car-audio installations rather than factory-replacement speaker locations.\u003c\/p\u003e\u003cp\u003eWith 1,500 watts RMS and 4,500 watts maximum power handling, the V15DV2 is suited to high-output bass systems built around a properly matched amplifier. Its 90 dB sensitivity and 30 Hz free-air resonance support strong low-bass performance when installed in an appropriate enclosure. The driver can be used in either sealed or ported enclosure designs.\u003c\/p\u003e\u003cp\u003eThe subwoofer uses a hybrid carbon-fiber and polypropylene diaphragm to combine cone rigidity with low moving-mass performance. A stitch-reinforced Santoprene surround supports controlled cone travel, while the listed 10 mm Xmax indicates its linear-excursion capability. These elements are designed to help the driver remain composed under demanding bass passages.\u003c\/p\u003e\u003cp\u003eA ferrite motor structure provides the magnetic force behind the V15DV2, and its vented pole piece is designed to assist cooling during extended operation. The 3-inch voice coil and rigid cast-aluminum basket are part of the subwoofer's heavy-duty construction. Cerwin-Vega also equips this model with a single-terminal impedance selector to simplify system wiring.\u003c\/p\u003e\u003cp\u003eThe V15DV2 is a practical choice for listeners building a dedicated bass upgrade around a large enclosure and a high-power mono amplifier. Its 8.46-inch mounting depth and 13.86-inch cutout requirement should be checked carefully before choosing an enclosure or installation location. For a complete system, it requires an enclosure, compatible amplification, power wiring, speaker wiring, and installation hardware.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e15-Inch Subwoofer:\u003c\/strong\u003e Large cone area supports high-output bass applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,500W RMS Handling:\u003c\/strong\u003e Supports use with a properly matched high-power amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 2-Ohm Voice Coils:\u003c\/strong\u003e Provides impedance flexibility for compatible amplifier systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid Carbon-Fiber\/Polypropylene Cone:\u003c\/strong\u003e Combines rigidity and responsive cone behavior.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSantoprene Surround:\u003c\/strong\u003e Stitch-reinforced surround supports repeated cone movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-Terminal Impedance Selector:\u003c\/strong\u003e Simplifies connection of the dual voice-coil system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe V15DV2 combines a polypropylene cone with a carbon-fiber diaphragm structure, Santoprene surround, ferrite magnet, and cast-aluminum basket. Its 3-inch voice coil, vented pole piece, and 10 mm Xmax are specified for sustained high-power bass use. The overall driver diameter is 15.61 inches, and overall height is 9.33 inches.\u003c\/p\u003e\u003cp\u003ePlan for an enclosure with at least an 8.46-inch mounting-depth clearance and a 13.86-inch cutout. Cerwin-Vega lists sealed and ported enclosures as suitable, with 4.0 cubic feet listed as optimum sealed volume and 5.0 cubic feet as optimum ported volume. Select an amplifier that is stable at the impedance selected on the subwoofer and set gain conservatively to avoid overpowering the driver.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970397159587,"sku":"CER-V15DV2","price":259.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71pFuR-YwlL_9f24079a-d42c-4d5c-a564-28d137f1a5e0.jpg?v=1786152620"},{"product_id":"cerwin-vega-cer-v15dv4","title":"Cerwin-Vega V15DV4 15\" Dual 4-Ohm Subwoofer","description":"\u003cp\u003eThe Cerwin-Vega V15DV4 is a 15-inch VEGA Series car audio subwoofer with dual 4-ohm voice coils. It is designed for systems that need substantial low-frequency output from a single large-format driver. Its 1,500-watt RMS power rating makes it suited to a properly matched external amplifier and enclosure.\u003c\/p\u003e\u003cp\u003eThis subwoofer is a fit for enthusiasts building a bass-focused vehicle audio system with flexible wiring requirements. The dual 4-ohm coil arrangement can present either a 2-ohm parallel load or an 8-ohm series load to a compatible amplifier. Both voice coils should be connected to the amplification source.\u003c\/p\u003e\u003cp\u003eThe V15DV4 has a 31 Hz resonant frequency, 90 dB sensitivity, and 10 mm Xmax. These published parameters support enclosure planning and amplifier matching. Cerwin-Vega specifies 1,500 watts nominal power handling and 4,500 watts maximum power handling.\u003c\/p\u003e\u003cp\u003eA hybrid carbon fiber and polypropylene cone forms the moving assembly, while the stitch-reinforced Santoprene surround supports excursion. The driver uses a strong ferrite motor structure and a 4-inch voice coil. A vented pole piece is included to provide additional cooling during extended play.\u003c\/p\u003e\u003cp\u003eThe V15DV4 can be used in either sealed or ported enclosure designs published by Cerwin-Vega. The manufacturer lists a 4.0 cu. ft. sealed enclosure and a 5.0 cu. ft. ported enclosure as design references. Its single-terminal connection and impedance selector are intended to simplify connection of the dual voice coils within a compatible system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,500W RMS Handling\u003c\/strong\u003e Supports high-power amplifier systems when properly matched.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils\u003c\/strong\u003e Allows 2-ohm parallel or 8-ohm series wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid Carbon Fiber\/Polypropylene Cone\u003c\/strong\u003e Combines rigid cone materials for bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStitch-Reinforced Santoprene Surround\u003c\/strong\u003e Supports cone movement during high-excursion use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFerrite Motor Structure\u003c\/strong\u003e Provides the driver motor assembly for operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented Pole Piece\u003c\/strong\u003e Adds cooling support for extended playback.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe V15DV4 uses a cast aluminum Vega basket, a ferrite ceramic magnet, a Santoprene surround, and a hybrid carbon fiber\/polypropylene diaphragm. Its 4-inch voice coil and vented pole piece are part of the driver’s high-power design. The overall diameter is 15.61 inches, and overall height is 9.33 inches.\u003c\/p\u003e\u003cp\u003eAllow for an 8.46-inch mounting depth and a 13.86-inch cutout diameter when planning an enclosure. For wiring, dual 4-ohm coils create a 2-ohm load in parallel or an 8-ohm load in series, so the amplifier must be stable at the selected load. Cerwin-Vega’s ported enclosure guidance also recommends a subsonic filter set to a minimum of 30 Hz.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970397192355,"sku":"CER-V15DV4","price":259.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71pFuR-YwlL.jpg?v=1786152621"},{"product_id":"cerwin-vega-cer-v8dv2","title":"Cerwin-Vega V8DV2 8\" Dual 2-Ohm Subwoofer","description":"\u003cp\u003eThe Cerwin-Vega V8DV2 is an 8-inch car audio subwoofer designed to add dedicated low-frequency output to a vehicle sound system. Its dual 2-ohm voice coil design provides wiring flexibility for matching an amplifier and system load. It is intended for installations that need strong bass from a compact driver footprint.\u003c\/p\u003e\u003cp\u003eThis subwoofer is suited to enthusiasts building or updating a custom bass system with an external amplifier and enclosure. Its 800-watt RMS power rating calls for an amplifier selected and tuned to deliver appropriate continuous power at the final wired impedance. Both voice coils should be connected during installation.\u003c\/p\u003e\u003cp\u003eThe V8DV2 uses a hybrid carbon fiber and polypropylene diaphragm with a stitch-reinforced Santoprene surround. This combination is designed to support controlled cone movement while handling demanding bass passages. Cerwin-Vega rates sensitivity at 85 dB (1W\/1m), with a 52 Hz free-air resonance specification.\u003c\/p\u003e\u003cp\u003eA ferrite motor structure and 2.5-inch voice coil form the core of the driver assembly. The subwoofer uses a cast aluminum basket and a single-terminal impedance selector for a tidy connection point. Its dual 2-ohm coils can be wired to present either a 1-ohm parallel load or a 4-ohm series load.\u003c\/p\u003e\u003cp\u003eThe V8DV2 can be used in a custom sealed or ported enclosure, with Cerwin-Vega publishing a ported enclosure recommendation for this model. Confirm available mounting clearance before cutting, as the driver requires a 7.48-inch cutout and 5.43 inches of mounting depth. Pair it with an amplifier stable at the intended final impedance and configure gain, crossover, and subsonic filtering appropriately.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 2-Ohm Voice Coils:\u003c\/strong\u003e Supports 1-ohm parallel or 4-ohm series wiring for amplifier matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e800W RMS Handling:\u003c\/strong\u003e Provides a continuous-power target for selecting a compatible amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid Carbon Fiber\/Polypropylene Diaphragm:\u003c\/strong\u003e Combines lightweight response with cone rigidity for bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStitch-Reinforced Santoprene Surround:\u003c\/strong\u003e Supports cone travel and helps provide long-term surround durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFerrite Motor Structure:\u003c\/strong\u003e Supplies the magnetic drive system behind the woofer assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-Terminal Impedance Selector:\u003c\/strong\u003e Consolidates the connection area for the dual-voice-coil configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe V8DV2 is built around a cast aluminum basket, ferrite magnet system, 2.5-inch voice coil, hybrid carbon fiber\/polypropylene diaphragm, and Santoprene surround. Its overall diameter is 8.72 inches, while the outer-edge diameter is 8.05 inches. These dimensions should be compared with the enclosure baffle, grille clearance, and surrounding trim before installation.\u003c\/p\u003e\u003cp\u003eUse an enclosure with a 7.48-inch cutout and at least 5.43 inches of mounting depth. For the manufacturer-published ported recommendation, use 0.20 cubic foot net internal volume, the specified slot-port dimensions, and a subsonic filter set no lower than 30 Hz. Wire the coils in parallel only with an amplifier rated for a 1-ohm load; series wiring presents a 4-ohm load.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970397782179,"sku":"CER-V8DV2","price":112.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71Dkr2nZbOL.jpg?v=1786152647"},{"product_id":"cerwin-vega-cer-v8dv4","title":"Cerwin-Vega V8DV4 8\" Dual 4-Ohm Voice Coil Subwoofer","description":"\u003cp\u003eThe Cerwin-Vega V8DV4 is an 8-inch car audio subwoofer designed to add dedicated low-frequency output to a factory-upgrade or custom sound system. Its dual 4-ohm voice coil configuration gives installers flexibility when matching the subwoofer to a compatible amplifier. This model is intended for listeners who want a compact subwoofer with substantial continuous power handling.\u003c\/p\u003e\u003cp\u003eWith an 800-watt RMS and 2,400-watt maximum power rating, the V8DV4 is built for systems that need stronger bass than full-range door speakers can provide. Its 85 dB sensitivity and 53 Hz resonant frequency describe a design focused on powered subwoofer applications. A properly selected amplifier, enclosure, and installation are required for operation.\u003c\/p\u003e\u003cp\u003eThe V8DV4 uses a hybrid carbon fiber and polypropylene diaphragm to combine stiffness with controlled cone movement. A stitch-reinforced Santoprene surround supports the cone during excursion. Cerwin-Vega specifies 6.5 mm of Xmax for this model.\u003c\/p\u003e\u003cp\u003eA ferrite motor structure supplies the magnetic force behind the subwoofer, while the cast aluminum basket provides a rigid mounting foundation. The 2.5-inch voice coil is paired with a vented pole-piece design intended to support cooling during extended playback. These construction elements are designed for demanding bass reproduction in a vehicle environment.\u003c\/p\u003e\u003cp\u003eFor system integration, the V8DV4 includes Cerwin-Vega's single-terminal impedance selector for its dual voice coils. The dual 4-ohm design can present either a 2-ohm parallel load or an 8-ohm series load, depending on the selected wiring configuration. This makes it suitable for a compatible mono amplifier or for use as part of a larger multi-subwoofer design.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e800W RMS Power Handling\u003c\/strong\u003e Supports use with a suitably matched subwoofer amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils\u003c\/strong\u003e Provides 2-ohm or 8-ohm wiring-load options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-Terminal Impedance Selector\u003c\/strong\u003e Simplifies voice-coil configuration at the subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid Carbon Fiber\/Polypropylene Cone\u003c\/strong\u003e Balances cone rigidity with controlled bass output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSantoprene Surround\u003c\/strong\u003e Supports repeated cone movement during playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFerrite Motor Structure\u003c\/strong\u003e Provides the magnetic force needed for subwoofer operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe V8DV4 combines a cast aluminum basket, ferrite magnet, carbon fiber\/polypropylene diaphragm, and stitch-reinforced Santoprene surround. Its vented pole piece is designed to aid cooling, and the 2.5-inch voice coil supports its rated power-handling design. The subwoofer measures 8.72 inches in overall diameter and has a 5.43-inch mounting depth.\u003c\/p\u003e\u003cp\u003eConfirm that the enclosure has at least a 7.48-inch cutout and enough behind-panel clearance for the 5.43-inch mounting depth and terminals. Use an amplifier rated to operate safely at the selected 2-ohm or 8-ohm load, and connect both voice coils through the model's impedance-selector arrangement. An enclosure and amplifier are separate system components and should be chosen according to the vehicle, available space, and amplifier capabilities.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970397814947,"sku":"CER-V8DV4","price":107.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71Dkr2nZbOL_6ba3543d-5e03-469e-85ed-6c3dc18f5280.jpg?v=1786152649"},{"product_id":"cerwin-vega-cer-vmax65d4","title":"Cerwin-Vega VMAX65D4 6.5\" Dual 4-Ohm Subwoofer","description":"\u003cp\u003eThe Cerwin-Vega VMAX65D4 is a 6.5-inch dual-voice-coil car subwoofer designed for bass reinforcement where installation space is limited. It gives a vehicle audio system a dedicated low-frequency driver rather than asking door speakers to reproduce demanding bass notes. With 200 watts RMS power handling, it is suited to compact custom enclosures and multi-subwoofer installations.\u003c\/p\u003e\u003cp\u003eThis VMAXX Series model is intended for listeners building a vehicle sound system around a separate amplifier and enclosure. Its dual 4-ohm voice coils provide wiring flexibility, with listed series resistance options of 2 ohms or 8 ohms. That flexibility can help an installer match the subwoofer configuration to a compatible amplifier and overall system plan.\u003c\/p\u003e\u003cp\u003eThe VMAX65D4 uses a treated semi-pressed pulped cone and treated foam surround to support controlled movement. Its 10 mm Xmax specification and 60.7 Hz free-air resonance reflect a compact subwoofer engineered for focused bass output. The 83 dB SPL rating should be considered when planning amplifier power and output expectations.\u003c\/p\u003e\u003cp\u003eConstruction includes a heavy-duty aluminum cast frame, oversized spider, and elevated motor structure with a cooling design. The black-coated voice coil is specified for higher thermal capability, while a shorting ring is used to help reduce distortion. A polished bumped backplate and Klippel DA-optimized motor and suspension symmetry further support consistent mechanical operation.\u003c\/p\u003e\u003cp\u003eUse the VMAX65D4 as a single compact bass driver or as part of a multiple-subwoofer system. Cerwin-Vega lists both sealed and ported enclosure recommendations, allowing the enclosure type to be selected around available space and desired system behavior. Confirm mounting clearance, enclosure volume, amplifier stability, and final wiring impedance before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Subwoofer:\u003c\/strong\u003e Adds dedicated bass capability in compact vehicle installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200W RMS Handling:\u003c\/strong\u003e Supports pairing with an appropriately rated external amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Provides series or parallel wiring flexibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 mm Xmax:\u003c\/strong\u003e Allows substantial cone travel for its size.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCast Aluminum Frame:\u003c\/strong\u003e Provides a rigid foundation for the driver assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShorting Ring:\u003c\/strong\u003e Helps reduce distortion during operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe VMAX65D4 combines a black design-patterned treated semi-pressed pulped cone with a treated foam surround and heavy industrial-strength aluminum cast frame. Its motor assembly includes a single stacked magnet structure, elevated cooling design, oversized spider, polished bumped backplate, and black-coated voice coil. Oversized polished black chrome-finished terminals provide the connection points for the dual voice coils.\u003c\/p\u003e\u003cp\u003ePlan for a 5.59-inch mounting cutout, 4.25-inch mounting depth, and 6.89-inch overall diameter. Cerwin-Vega lists 0.4 cubic foot sealed and 0.75 cubic foot ported enclosure volumes; enclosure construction and tuning should be handled carefully for the intended application. This is a passive subwoofer, so it requires a suitable external amplifier, speaker wiring, enclosure, and secure mounting hardware.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970397847715,"sku":"CER-VMAX65D4","price":75.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61M2ZxiX0YL.jpg?v=1786152651"},{"product_id":"cerwin-vega-cer-vs12sh","title":"Cerwin-Vega VS12SH 12\" Passive Spare Tire Subwoofer","description":"\u003cp\u003eThe Cerwin-Vega VS12SH is a passive spare-tire subwoofer system designed to add low-frequency output without taking up conventional cargo-area space. It mounts in the spare-tire well, making it a practical option for vehicles where a box enclosure would limit usable trunk room. An external amplifier is required because this is a non-amplified subwoofer.\u003c\/p\u003e\u003cp\u003eThis model is intended for drivers who want to improve bass response while retaining a discreet, space-conscious installation. Its slim enclosure format is suited to many cars, trucks, and SUVs with accessible spare-tire storage. The design lets the subwoofer remain integrated with the vehicle rather than occupying the main cargo floor.\u003c\/p\u003e\u003cp\u003eWith 300 watts RMS and 600 watts maximum power handling, the VS12SH is built for a properly matched external amplifier. Its dual 4-ohm voice-coil configuration gives an installer wiring flexibility when planning a compatible mono amplifier setup. The specified 20 Hz to 500 Hz frequency response supports low-end reinforcement for a full-range car audio system.\u003c\/p\u003e\u003cp\u003eThe enclosure uses a shallow form factor with a 14.2-inch mounting diameter and 4.7-inch mounting width. Cerwin-Vega specifies a treated-paper cone, rubber surround, stamped-steel basket, ferrite magnet, and 4-inch voice coil. These components are housed in a spare-tire-oriented enclosure intended for a concealed installation.\u003c\/p\u003e\u003cp\u003eThe VS12SH can complement either a factory audio system with the appropriate integration equipment or an aftermarket receiver and amplifier system. Because it is passive, amplifier selection, signal integration, wiring, and final tuning remain part of the overall installation plan. This makes it suitable for system upgrades where preserving trunk space is a priority.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Spare-Tire Design:\u003c\/strong\u003e Installs in the spare-tire well and requires an external amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpace-Conscious Format:\u003c\/strong\u003e Uses the spare-tire area instead of a conventional trunk enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W RMS Handling:\u003c\/strong\u003e Supports a properly matched amplifier for sustained bass output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Provides wiring flexibility for compatible amplifier configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20 Hz–500 Hz Response:\u003c\/strong\u003e Covers low-frequency bass reinforcement for vehicle audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow Enclosure Profile:\u003c\/strong\u003e Measures 14.2 inches in diameter and 4.7 inches wide.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe VS12SH uses a treated-paper cone with a rubber surround, stamped-steel basket, ferrite magnet, and 4-inch voice coil. Its spare-tire enclosure is specified with solid, non-resonant die-cast construction. The compact circular design is made to sit within the spare-tire area rather than in the main cargo space.\u003c\/p\u003e\u003cp\u003eBefore purchase, measure the spare-tire well, spare-tire orientation, center-mount arrangement, and available vertical clearance. The manual describes 8 mm and 10 mm mounting bolts, plus a replacement ABS fixing nut for certain Audi\/VW-style spare-tire retainers. Connect the supplied-style speaker wiring harness at the enclosure handle area and use a correctly configured external amplifier; professional installation is recommended by the manufacturer for optimal performance.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970397880483,"sku":"CER-VS12SH","price":236.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/51_AduR3msL.jpg?v=1786152652"},{"product_id":"gravity-audio-g12bd1-single-12-1000w-loaded-warzone-competition-series-vented-subwoofer-enclosure-built-in-amplifier-4-ohm-with-high-premium-wood-12-inches-universal-fit","title":"Gravity G12BD1 12\" Powered Subwoofer Enclosure","description":"\u003cp\u003eThe Gravity G12BD1 is a loaded 12-inch car subwoofer enclosure designed to add dedicated low-frequency output to a vehicle audio system. It combines a pre-mounted Warzone Series subwoofer with a vented enclosure, providing a space-conscious way to add bass without building a custom box. Product listings describe an integrated amplifier for an all-in-one installation approach.\u003c\/p\u003e\u003cp\u003eThis enclosure is intended for drivers who want stronger bass response than factory full-range speakers can provide. Its ported enclosure design is tuned to reinforce low frequencies and give bass notes more presence. The 4-ohm final load also makes system matching more straightforward when planning the rest of the audio system.\u003c\/p\u003e\u003cp\u003eThe G12BD1 is rated for 500 watts RMS and 1,000 watts peak power. The enclosure provides 2.00 cubic feet of internal air space and is tuned to 38 Hz. These characteristics suit listeners seeking extended, low-frequency reinforcement from a single 12-inch enclosure.\u003c\/p\u003e\u003cp\u003eGravity uses a heavy-duty MDF enclosure construction for rigidity and durability. The loaded driver is pre-installed and wired to its final 4-ohm impedance, reducing the work involved compared with sourcing a separate subwoofer and enclosure. Its black finish is designed to integrate neatly in a trunk or cargo area.\u003c\/p\u003e\u003cp\u003eBefore purchase, measure the intended mounting location and plan for secure installation. The published enclosure dimensions are 20 x 17 x 17.5 inches, so it is best suited to vehicles with adequate trunk or cargo space. Verify the amplifier configuration, power wiring requirements, and included accessories with the selling dealer before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 12-Inch Subwoofer:\u003c\/strong\u003e Provides dedicated bass output from one loaded driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W RMS Rating:\u003c\/strong\u003e Supports continuous-power system planning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,000W Peak Rating:\u003c\/strong\u003e Indicates short-term maximum power handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Final Load:\u003c\/strong\u003e Simplifies amplifier and wiring compatibility planning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented Enclosure:\u003c\/strong\u003e Uses a ported design tuned for low-frequency reinforcement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-Loaded MDF Box:\u003c\/strong\u003e Reduces the need to build and wire a separate enclosure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe G12BD1 uses a black, heavy-duty MDF wedge-style enclosure with a vented design. Its 2.00-cubic-foot air space and 38 Hz tuning are part of the assembled enclosure package. The subwoofer is pre-loaded and pre-wired at a 4-ohm final impedance.\u003c\/p\u003e\u003cp\u003eInstall the enclosure in a dry, secure trunk or cargo-area location where it cannot move while driving. Confirm that the 20 x 17 x 17.5-inch enclosure will fit before ordering, and allow suitable clearance for any amplifier section and wiring connections. Product listings identify the unit as powered, but the published amplifier electrical details and wiring-kit contents should be verified with the dealer.\u003c\/p\u003e","brand":"GRAVITY","offers":[{"title":"Default Title","offer_id":47970399912099,"sku":"G12BD1","price":125.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/81lbzd6LJYL_3dd1bef4-bfae-467a-b225-8b865d3d9420.jpg?v=1786152765"},{"product_id":"gravity-g3-10d2","title":"Gravity G3-10D2 10\" Dual 2-Ohm Car Subwoofer","description":"\u003cp\u003eThe Gravity G3-10D2 is a 10-inch component car subwoofer designed to add dedicated low-frequency output to an aftermarket audio system. It is intended for listeners who want more bass authority than factory full-range speakers can provide. Because it is a passive subwoofer driver, it is designed to be used with an external amplifier and a properly built enclosure.\u003c\/p\u003e\u003cp\u003eThis model uses dual 2-ohm voice coils, giving installers wiring flexibility when matching the subwoofer to a compatible mono or multi-channel amplifier. Its 750-watt RMS power rating and 1,500-watt maximum power handling make amplifier selection and gain setup important. The DVC design can support series or parallel wiring arrangements, depending on the amplifier's supported impedance load.\u003c\/p\u003e\u003cp\u003eThe G3-10D2 uses a pressed paper cone and high-roll foam surround. This combination is intended to provide cone support and controlled movement during bass reproduction. It is suited to music systems focused on low-end impact while retaining a conventional 10-inch subwoofer format.\u003c\/p\u003e\u003cp\u003eAn airflow cooling design is specified to help manage heat around the voice-coil assembly during sustained use. The subwoofer also uses a high-flux motor design to support its low-frequency operation. These construction details are aimed at maintaining consistent operation when the driver is installed and powered appropriately.\u003c\/p\u003e\u003cp\u003eThe G3-10D2 can serve as a single-subwoofer bass upgrade or as part of a multi-subwoofer system. Final performance depends on enclosure design, amplifier capability, electrical-system condition, crossover settings, and correct wiring. Confirm available mounting depth, cutout dimensions, and amplifier load compatibility before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Subwoofer:\u003c\/strong\u003e Provides dedicated bass output in a commonly used car-audio size.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 2-Ohm Voice Coils:\u003c\/strong\u003e Allows flexible series or parallel wiring options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e750-Watt RMS Rating:\u003c\/strong\u003e Supports sustained power matching with a suitable external amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,500-Watt Maximum Handling:\u003c\/strong\u003e Indicates the listed short-term maximum power figure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed Paper Cone:\u003c\/strong\u003e Uses a rigid cone material for bass-driver operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow Cooling Design:\u003c\/strong\u003e Helps manage heat during extended listening sessions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe G3-10D2 combines a competition-grade pressed paper cone with a high-roll foam surround and high-flux motor design. Its dual voice-coil terminals are intended for flexible system wiring, while the cooling design supports thermal management during use. It is a passive driver rather than a self-powered enclosure.\u003c\/p\u003e\u003cp\u003eInstall the subwoofer in an enclosure designed for its application and verify physical fit before cutting or mounting. Use an amplifier that is stable at the final impedance created by the selected voice-coil wiring and set gains conservatively. An enclosure, amplifier, wiring, fuse protection, and installation hardware should be selected separately unless specifically included by the seller.\u003c\/p\u003e","brand":"GRAVITY","offers":[{"title":"Default Title","offer_id":47970399977635,"sku":"G3-10D2","price":76.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/81gus_k19kL_2f30ec24-69c9-4546-be60-8a98bb185948.jpg?v=1786152768"},{"product_id":"gravity-g3-12-inch-2000-watt-package-car-audio-subwoofer-w-4-ohm-dvc-power-single","title":"Gravity G3-12D4 12\" Dual 4-Ohm Car Subwoofer","description":"\u003cp\u003eThe Gravity G3-12D4 is a 12-inch car audio subwoofer designed to add dedicated low-frequency output to an amplified vehicle sound system. Its dual 4-ohm voice coil configuration provides wiring flexibility when matching the subwoofer to a compatible mono or multi-channel amplifier. This model is sold as a single subwoofer for custom enclosure and system builds.\u003c\/p\u003e\u003cp\u003eWith a listed 1,000-watt RMS power rating and 2,000-watt peak power rating, the G3-12D4 is intended for systems that need substantial bass handling. Its 30-500 Hz frequency-response specification covers the low-frequency range typically assigned to a subwoofer. An 87 dB sensitivity rating is specified for the driver.\u003c\/p\u003e\u003cp\u003eThe subwoofer uses a competition-grade pressed paper cone to reproduce bass frequencies, paired with a high-roll foam surround. This combination is designed to support cone movement while maintaining the driver structure during regular use. The G3-12D4 also uses an advanced airflow cooling system intended to help manage heat at the motor and voice-coil assembly.\u003c\/p\u003e\u003cp\u003eDual 4-ohm voice coils allow the G3-12D4 to be wired in parallel for a 2-ohm final load or in series for an 8-ohm final load. The appropriate configuration depends on the amplifier's supported impedance and rated power output. Matching amplifier output to the subwoofer's RMS rating and final impedance is important for a properly balanced installation.\u003c\/p\u003e\u003cp\u003eThe G3-12D4 is suited to car audio upgrades where a separate subwoofer enclosure and external amplifier are being used. It can serve as a single-driver bass solution or as part of a multi-subwoofer setup. Select an enclosure, amplifier, wiring, and electrical system appropriate for the vehicle and the desired final impedance.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-Inch Subwoofer:\u003c\/strong\u003e Adds dedicated bass reproduction to an amplified car audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Supports 2-ohm parallel or 8-ohm series wiring options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,000W RMS Rating:\u003c\/strong\u003e Helps match the driver with an appropriately rated amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed Paper Cone:\u003c\/strong\u003e Provides the specified competition-grade cone construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Roll Foam Surround:\u003c\/strong\u003e Supports cone travel and driver durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow Cooling System:\u003c\/strong\u003e Helps manage heat during sustained operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe G3-12D4 combines a pressed paper cone, high-roll foam surround, dual voice-coil motor structure, and airflow cooling design. Its 12-inch format is intended for installation in a suitable subwoofer enclosure. The listed package dimensions are 13.3 x 13.1 x 8.7 inches.\u003c\/p\u003e\u003cp\u003eInstall the subwoofer securely in an enclosure designed for a 12-inch driver, using a proper seal around the mounting flange. Connect both voice coils with correct polarity and choose series or parallel wiring only after confirming the amplifier's safe operating impedance. An external amplifier, enclosure, and installation wiring are needed for operation; verify mounting clearance before purchase.\u003c\/p\u003e","brand":"GRAVITY","offers":[{"title":"Default Title","offer_id":47970400010403,"sku":"G3-12D4","price":79.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/81TtGjSJpWL.jpg?v=1786152770"},{"product_id":"gravity-g3-15d2","title":"Gravity G3-15D2 15\" Dual 2-Ohm Car Subwoofer","description":"\u003cp\u003eThe Gravity G3-15D2 is a 15-inch car audio subwoofer made for systems that need dedicated low-frequency output beyond what full-range speakers can reproduce. Its large woofer format is intended for enthusiasts building a bass-focused upgrade in a vehicle with adequate enclosure space. The dual-voice-coil design provides flexibility when planning a compatible amplifier and wiring configuration.\u003c\/p\u003e\u003cp\u003eRated for 1,200 watts RMS and 2,400 watts peak power per subwoofer, the G3-15D2 is designed for substantial continuous power handling when matched with an appropriate amplifier. Its published 30 Hz to 500 Hz frequency-response range covers low bass through upper-bass duties. An 87 dB sensitivity rating is also specified.\u003c\/p\u003e\u003cp\u003eThis model uses a competition-grade pressed paper cone paired with a high-roll foam surround. That material combination is designed to support controlled cone movement while providing the compliance needed for bass reproduction. The foam surround also forms the visible outer suspension of the woofer assembly.\u003c\/p\u003e\u003cp\u003eGravity specifies an advanced air-flow cooling system for the G3-15D2. Cooling is an important consideration in a high-power subwoofer system because sustained playback can create heat at the voice coils. This design feature is intended to support operation during extended listening sessions.\u003c\/p\u003e\u003cp\u003eThe G3-15D2 is suited to a custom car-audio installation using a separately selected enclosure and amplifier. Its two 2-ohm voice coils allow the final load to be planned around the amplifier's stable impedance range. Confirm the enclosure dimensions, available mounting space, amplifier capability, and complete wiring plan before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e15-Inch Woofer:\u003c\/strong\u003e Provides a large cone area for dedicated bass reproduction in a custom vehicle audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,200W RMS Rating:\u003c\/strong\u003e Supports amplifier matching based on continuous power handling rather than peak output alone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 2-Ohm Voice Coils:\u003c\/strong\u003e Gives installers wiring options when configuring the subwoofer load for a compatible amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed Paper Cone:\u003c\/strong\u003e Uses the specified competition-grade cone material for the moving diaphragm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Roll Foam Surround:\u003c\/strong\u003e Supports cone travel and forms a durable outer suspension around the cone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-Flow Cooling System:\u003c\/strong\u003e Is specified to help manage heat during extended high-power playback.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe G3-15D2 combines a competition-grade pressed paper cone with a high-roll foam surround in a 15-inch subwoofer format. Its published construction also includes an advanced air-flow cooling system. These elements are intended for a dedicated bass driver rather than a full-range speaker application.\u003c\/p\u003e\u003cp\u003eUse the G3-15D2 in a properly designed enclosure that fits both the subwoofer and the vehicle's available space. Select an amplifier with power delivery and minimum-impedance capability appropriate for the final dual-voice-coil wiring arrangement. Mounting depth, cutout diameter, enclosure volume, terminal type, and included hardware were not confirmed in the available product specifications, so verify these details before purchase or fabrication.\u003c\/p\u003e","brand":"GRAVITY","offers":[{"title":"Default Title","offer_id":47970400043171,"sku":"G3-15D2","price":92.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/pixelcut-export_2_7af2c51b-9d9a-4c9c-b511-5120538d07d9.jpg?v=1786152772"},{"product_id":"gravity-g3-15d4","title":"Gravity G3-15D4 15\" Dual 4-Ohm Car Subwoofer","description":"\u003cp\u003eThe Gravity G3-15D4 is a 15-inch component car subwoofer for systems that need dedicated low-frequency output beyond what full-range speakers can provide. Its dual 4-ohm voice-coil design gives installers series or parallel wiring flexibility when matching the subwoofer to an amplifier. This model is intended for use in a properly designed enclosure and vehicle audio system.\u003c\/p\u003e\u003cp\u003eWith 1,200 watts RMS power handling and a 2,400-watt peak rating, the G3-15D4 is suited to higher-power bass systems when paired with an amplifier that is stable at the selected final impedance. Its 30 Hz to 500 Hz published frequency-response range covers low bass through upper-bass frequencies. The 87 dB sensitivity rating provides a useful reference when planning amplifier power and overall system output.\u003c\/p\u003e\u003cp\u003eThe subwoofer uses a competition-grade pressed paper cone paired with a high-roll foam surround. This combination is designed to support cone movement while maintaining a durable interface between the cone and frame. The result is a purpose-built low-frequency driver for custom car-audio installations.\u003c\/p\u003e\u003cp\u003eGravity specifies an advanced air-flow cooling system to help manage heat during extended operation. Thermal management is important in a high-power subwoofer system because excessive heat can affect long-term voice-coil performance. Proper gain setting and clean amplifier power remain essential for reliable operation.\u003c\/p\u003e\u003cp\u003eThe G3-15D4 fits upgrade paths ranging from a single custom bass enclosure to multi-subwoofer systems. Its two 4-ohm voice coils may be wired in parallel for a 2-ohm final load or in series for an 8-ohm final load per subwoofer. Select an enclosure, amplifier, wiring, and electrical support appropriate for the vehicle and intended listening level.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e15-Inch Woofer:\u003c\/strong\u003e Provides substantial cone area for dedicated bass reproduction in a custom vehicle system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,200W RMS Handling:\u003c\/strong\u003e Supports amplifier matching based on continuous power rather than peak-only ratings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Allows 2-ohm parallel or 8-ohm series wiring for one subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed Paper Cone:\u003c\/strong\u003e Uses a competition-grade cone material specified for low-frequency playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Roll Foam Surround:\u003c\/strong\u003e Supports cone travel and is designed for durable use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-Flow Cooling System:\u003c\/strong\u003e Helps manage heat during extended high-power operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe G3-15D4 combines a pressed paper cone, high-roll foam surround, large motor structure, and spring-loaded terminals in a purpose-built subwoofer design. Its 15-inch format requires a suitably rigid enclosure and adequate cargo-space planning. Keep the cone and surround clean, and avoid harsh chemicals or excessive moisture during maintenance.\u003c\/p\u003e\u003cp\u003eInstall the subwoofer securely in a sealed, ported, or bandpass enclosure designed for a 15-inch driver, with no air leaks or mounting obstructions. Wire its dual 4-ohm coils in series for 8 ohms or parallel for 2 ohms, and verify that the amplifier is stable at the resulting load. Set amplifier gain conservatively, use an appropriate low-pass filter, and avoid audible distortion or excessive bass boost.\u003c\/p\u003e","brand":"GRAVITY","offers":[{"title":"Default Title","offer_id":47970400075939,"sku":"G3-15D4","price":90.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/pixelcut-export_2_4f5680a1-ba2b-476e-8a95-b492b9b49bec.jpg?v=1786152773"},{"product_id":"gravity-g3-8d2","title":"Gravity G3-8D2 8\" Dual 2-Ohm Car Subwoofer","description":"\u003cp\u003eThe Gravity G3-8D2 is an 8-inch car audio subwoofer designed for systems that need bass output in a compact speaker format. Its dual 2-ohm voice coil arrangement provides wiring flexibility when matching the subwoofer to a compatible amplifier. This makes it a practical option for installations where enclosure and mounting space are limited.\u003c\/p\u003e\u003cp\u003eThis model is rated for up to 1,000 watts of peak power. It is intended to reproduce low-frequency content for a fuller, more grounded sound in a car audio system. An appropriately matched amplifier and enclosure are required for operation.\u003c\/p\u003e\u003cp\u003eThe G3-8D2 uses a pressed paper cone intended for car audio bass reproduction. A high-roll foam surround supports cone movement while providing a flexible outer suspension. These materials are specified as part of the subwoofer's competition-grade construction.\u003c\/p\u003e\u003cp\u003eAn advanced airflow cooling design is listed for the G3-8D2. This design is intended to help manage heat during extended playback. The subwoofer also uses a high-flux motor system to support its low-frequency performance.\u003c\/p\u003e\u003cp\u003eWith its 8-inch diameter and dual 2-ohm coils, the G3-8D2 can fit into a compact subwoofer upgrade path when paired with compatible equipment. It is suited to listeners building or updating a dedicated bass section in a vehicle. Confirm enclosure requirements, amplifier stability, available mounting depth, and final wired impedance before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Subwoofer:\u003c\/strong\u003e Compact woofer size for vehicle bass systems with limited installation space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,000-Watt Peak Rating:\u003c\/strong\u003e Listed peak-power handling for selecting compatible amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 2-Ohm Voice Coils:\u003c\/strong\u003e Provides multiple possible wiring configurations with a suitable amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed Paper Cone:\u003c\/strong\u003e Cone material specified for low-frequency car audio reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Roll Foam Surround:\u003c\/strong\u003e Flexible surround supports the cone's movement during playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow Cooling System:\u003c\/strong\u003e Listed cooling design intended to help manage heat over extended use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Gravity G3-8D2 combines a pressed paper cone, high-roll foam surround, and high-flux motor system. Its construction is designed around compact 8-inch bass reproduction, with an airflow cooling system listed as part of the design. The dual voice coil configuration is a central part of its electrical design.\u003c\/p\u003e\u003cp\u003eUse the G3-8D2 only with an amplifier that remains stable at the final impedance created by the chosen voice-coil wiring. Install it in an enclosure designed for the subwoofer after confirming the required cutout, mounting depth, and enclosure recommendations with the manufacturer or seller. Speaker wire, an enclosure, an amplifier, and installation hardware are not confirmed as included.\u003c\/p\u003e","brand":"GRAVITY","offers":[{"title":"Default Title","offer_id":47970400108707,"sku":"G3-8D2","price":48.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/1_2043878f-980a-4fd4-9048-86fcfdb235c7.jpg?v=1786152775"},{"product_id":"gravity-1x-8-inch-1000-watt-car-audio-subwoofer-w-4-ohm-dvc-power-8-sub-single-feature-dual-voice-coil-thick-magnet-design-for-car-atv-van-high-performance-car-show","title":"Gravity G3-8D4 8\" 4-Ohm Dual Voice Coil Subwoofer","description":"\u003cp\u003eThe Gravity G3-8D4 is an 8-inch car audio subwoofer designed to add dedicated low-frequency output to a system using smaller full-range speakers. Its compact driver size can suit installations where a larger subwoofer is not practical. This model uses a dual voice coil configuration and is listed as a 4-ohm woofer.\u003c\/p\u003e\u003cp\u003eBuilt for bass reproduction, the G3-8D4 helps extend the low end that door speakers and coaxial speakers typically cannot reproduce effectively. It is intended for listeners building or upgrading a car audio system with a separate subwoofer stage. The sound focus is on low-frequency impact and dynamic bass response.\u003c\/p\u003e\u003cp\u003eThe subwoofer uses a competition-grade pressed paper cone paired with a high-roll foam surround. This combination is designed to provide a rigid radiating surface with surround travel suitable for bass duty. The materials also support the product's performance-oriented Warzone-series presentation.\u003c\/p\u003e\u003cp\u003eA high-flux motor is paired with an advanced airflow cooling design. These elements are intended to support the driver during sustained use by managing heat around the motor and voice-coil area. Gravity also identifies the design as a dual voice coil subwoofer, giving installers wiring flexibility when matching an amplifier.\u003c\/p\u003e\u003cp\u003eThe G3-8D4 is a component subwoofer rather than a complete powered enclosure. It is best used with a correctly matched external amplifier, suitable enclosure, and proper wiring. For a balanced system, pair it with full-range speakers and configure the amplifier's crossover so the subwoofer handles low bass frequencies.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Subwoofer:\u003c\/strong\u003e Compact driver format for space-conscious car audio builds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Voice Coil Design:\u003c\/strong\u003e Provides wiring flexibility for compatible amplifier systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Listing:\u003c\/strong\u003e Listed as a 4-ohm car audio woofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed Paper Cone:\u003c\/strong\u003e Competition-grade cone material supports bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Roll Foam Surround:\u003c\/strong\u003e Supports cone movement while adding durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow Cooling Design:\u003c\/strong\u003e Helps manage heat during sustained playback.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe G3-8D4 combines a pressed paper cone, high-roll foam surround, high-flux motor, and airflow cooling design in an 8-inch subwoofer format. Its dual voice coil construction is intended for car audio installations requiring flexible wiring choices. The driver is part of Gravity's Warzone subwoofer lineup.\u003c\/p\u003e\u003cp\u003ePlan the installation around a compatible amplifier, an enclosure designed for this specific driver, and enough mounting clearance for the woofer and its terminals. Confirm the final impedance after wiring both voice coils before connecting the amplifier, and set gain and crossover controls carefully. An enclosure, amplifier, and wiring accessories are not identified in the confirmed product listing.\u003c\/p\u003e","brand":"GRAVITY","offers":[{"title":"Default Title","offer_id":47970400141475,"sku":"G3-8D4","price":46.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/812XaSob-FL.jpg?v=1786152778"},{"product_id":"gravity-g5-12-inch-3000-watt-package-car-audio-subwoofer-w-4-ohm-dvc-power-single","title":"Gravity G5-12D 12\" Dual 4-Ohm Car Subwoofer","description":"\u003cp\u003eThe Gravity G5-12D is a 12-inch car audio subwoofer designed to add dedicated low-frequency output to an aftermarket sound system. It is suited to listeners building a bass-focused upgrade with a separate amplifier and enclosure. Its dual 4-ohm voice-coil configuration gives installers flexibility when planning an amplifier load.\u003c\/p\u003e\u003cp\u003eRated for 750 watts RMS and 3,000 watts maximum power, the G5-12D is intended for systems that require sustained bass handling rather than relying on full-range speakers alone. Its specified 30 Hz to 500 Hz frequency response covers the bass and upper-bass range commonly assigned to a subwoofer. An 87 dB sensitivity rating provides a useful reference when matching the driver with suitable amplification.\u003c\/p\u003e\u003cp\u003eThe subwoofer uses a competition-grade pressed-paper cone and a high-roll foam surround. This material combination is intended to support controlled cone movement while maintaining the durability needed for mobile-audio use. The design is finished in black and uses a flush-mount installation style.\u003c\/p\u003e\u003cp\u003eAn advanced airflow cooling system is specified to help manage heat during extended operation. This is particularly relevant when the subwoofer is driven near its continuous power rating in a properly designed system. As with any high-power subwoofer, clean amplifier power and correct gain adjustment are important for dependable operation.\u003c\/p\u003e\u003cp\u003eThe G5-12D can be used as the foundation of a single-subwoofer system or paired with a compatible second driver in a larger build. Because it is a passive subwoofer, it requires an external amplifier, appropriate enclosure, wiring, and crossover setup. Its dual 4-ohm coils should be wired only in a configuration that the chosen amplifier is designed to support.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-Inch Subwoofer:\u003c\/strong\u003e Adds dedicated bass capability to a car audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e750W RMS Handling:\u003c\/strong\u003e Supports sustained power when matched with a suitable amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Provides wiring flexibility for compatible mono amplifier setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed-Paper Cone:\u003c\/strong\u003e Forms the primary moving surface for bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Roll Foam Surround:\u003c\/strong\u003e Supports cone travel and complements the durable driver design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow Cooling System:\u003c\/strong\u003e Helps manage heat during longer listening sessions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe G5-12D combines a pressed-paper cone with a high-roll foam surround in a black, flush-mount subwoofer design. Its specified cooling arrangement is intended to support thermal management during operation. The driver is designed for car audio use and is supplied as a single subwoofer unit.\u003c\/p\u003e\u003cp\u003eInstall the G5-12D in an enclosure designed for a 12-inch subwoofer, then power it with an external amplifier selected around its 750-watt RMS rating. Verify the final impedance created by the two 4-ohm voice coils before connecting the amplifier. Use a low-pass crossover and follow the enclosure, wiring, and amplifier manufacturers' instructions for system setup.\u003c\/p\u003e","brand":"GRAVITY","offers":[{"title":"Default Title","offer_id":47970400174243,"sku":"G5-12D","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/81snI7BiXVL.jpg?v=1786152780"},{"product_id":"car-vehicle-subwoofer-audio-speaker-12-inch-competition-grade-pressed-paper-cone-2-ohm-dvc-advanced-air-flow-4800w-power-for-stereo-sound-system-gravity-warzone-g712d2-1-subwoofer","title":"GRAVITY G7-12D2 12\" Dual 2-Ohm Car Subwoofer","description":"\u003cp\u003eThe GRAVITY G7-12D2 is a 12-inch car audio subwoofer designed to add dedicated low-frequency output to a vehicle sound system. It is intended for listeners building a bass-focused upgrade with a separate compatible amplifier and enclosure. Its dual 2-ohm voice coil design provides wiring flexibility when matching the subwoofer to an amplifier.\u003c\/p\u003e\u003cp\u003eThis model uses a competition-grade pressed paper cone and a high-roll foam surround. That combination is designed to support controlled cone movement while reproducing bass-heavy music. The published frequency response is 35 Hz to 500 Hz, covering the low-frequency range typically assigned to a subwoofer.\u003c\/p\u003e\u003cp\u003eThe G7-12D2 carries a published peak-power rating of 4,800 watts per subwoofer. Because peak ratings are not the same as continuous amplifier requirements, amplifier selection should be based on compatible impedance operation and conservative gain setup. Proper tuning helps keep bass output clear and reduces the chance of audible distortion.\u003c\/p\u003e\u003cp\u003eAn advanced airflow cooling system is part of the subwoofer's listed design. This feature is intended to help manage heat during extended listening sessions. The listed sensitivity is 88 dB, and final output will also depend on the enclosure, amplifier power, vehicle acoustics, and installation quality.\u003c\/p\u003e\u003cp\u003eThe G7-12D2 is a bare subwoofer rather than a complete powered bass system. It is suited to custom sealed or ported enclosure projects where the installer can choose the box style and wiring arrangement. With its two 2-ohm voice coils, it can be wired for either a 1-ohm or 4-ohm final load when both coils are used correctly.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-Inch Subwoofer:\u003c\/strong\u003e Adds dedicated low-frequency reproduction to a custom car audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 2-Ohm Voice Coils:\u003c\/strong\u003e Supports series or parallel wiring to suit compatible amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4,800-Watt Peak Rating:\u003c\/strong\u003e Published peak power handling per individual subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed Paper Cone:\u003c\/strong\u003e Provides a purpose-built cone material for bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Roll Foam Surround:\u003c\/strong\u003e Supports cone travel while helping maintain a durable edge suspension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow Cooling System:\u003c\/strong\u003e Helps manage heat during extended high-output operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GRAVITY G7-12D2 uses a competition-grade pressed paper cone, high-roll foam surround, and dual voice coil motor structure. Its design is intended for installation in a vehicle-specific or custom-built subwoofer enclosure. The subwoofer is listed for car-audio use and requires an enclosure for mounting.\u003c\/p\u003e\u003cp\u003eUse an amplifier that is stable at the final impedance created by the selected wiring method. The two 2-ohm coils can be wired in parallel for a 1-ohm load or in series for a 4-ohm load; never connect the subwoofer until the amplifier's supported load is confirmed. Secure the driver to a properly sealed enclosure, use adequately sized speaker wire, and set amplifier gain and low-pass filtering carefully to avoid distortion.\u003c\/p\u003e","brand":"GRAVITY","offers":[{"title":"Default Title","offer_id":47970400207011,"sku":"G7-12D2","price":209.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/91vCWdMd1mL_ca218a94-9138-49e6-aec7-23f24373f6c2.jpg?v=1786152782"},{"product_id":"car-vehicle-subwoofer-audio-speaker-15-inch-competition-grade-pressed-paper-cone-2-ohm-dvc-advanced-air-flow-4800w-power-for-stereo-sound-system-gravity-warzone-g715d2-1-subwoofer","title":"Gravity G7-15D2 15\" Dual 2-Ohm Car Subwoofer","description":"\u003cp\u003eThe Gravity G7-15D2 is a 15-inch car audio subwoofer designed to add dedicated low-frequency output to a vehicle sound system. It is a bare subwoofer driver, intended for installation in a compatible enclosure and connection to an external amplifier. Its dual 2-ohm voice coils give system builders wiring flexibility when matching the subwoofer to a suitable mono amplifier.\u003c\/p\u003e\u003cp\u003eThis model is intended for listeners who want substantial bass extension from a large-diameter subwoofer. Its published frequency response of 30 Hz to 500 Hz places it in the range typically handled by a subwoofer rather than full-range speakers. A properly adjusted low-pass crossover helps it blend with the vehicle's main speakers.\u003c\/p\u003e\u003cp\u003eThe G7-15D2 is rated at 2,400 watts RMS and 4,800 watts peak power. These ratings make amplifier selection, gain setup, wiring, and enclosure construction especially important. Use an amplifier that is stable at the final impedance created by the chosen voice-coil wiring.\u003c\/p\u003e\u003cp\u003eA competition-grade pressed paper cone forms the radiating surface, while a high-roll foam surround supports cone movement. The subwoofer also uses an advanced airflow cooling system intended to help manage heat during operation. Together, these construction elements support use in high-output car audio installations.\u003c\/p\u003e\u003cp\u003eBecause it is a single 15-inch driver rather than a loaded enclosure, the G7-15D2 can be used in a custom sealed or ported box selected for the available vehicle space and desired bass character. The two 2-ohm voice coils can be wired in parallel for a 1-ohm final load or in series for a 4-ohm final load. Professional installation is recommended for enclosure, wiring, and amplifier setup.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e15-Inch Driver:\u003c\/strong\u003e Large cone area supports dedicated low-frequency reproduction in a car audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2,400W RMS Rating:\u003c\/strong\u003e Supports high-power system designs when paired with an appropriately matched amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 2-Ohm Voice Coils:\u003c\/strong\u003e Allows series or parallel wiring to suit compatible amplifier loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed Paper Cone:\u003c\/strong\u003e Competition-grade cone material provides the driver’s primary sound-producing surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Roll Foam Surround:\u003c\/strong\u003e Supports cone travel while forming the outer edge of the moving assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow Cooling System:\u003c\/strong\u003e Designed to aid heat management during sustained high-output operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe G7-15D2 uses a competition-grade pressed paper cone and high-roll foam surround in a 15-inch subwoofer format. Its dual voice-coil layout provides two 2-ohm coils, and the published design also incorporates advanced airflow cooling. The product is supplied as one standalone subwoofer driver rather than a preloaded enclosure.\u003c\/p\u003e\u003cp\u003eInstall the subwoofer in a properly built, sealed enclosure with no air leaks, using mounting hardware appropriate for the enclosure material. Wire both voice coils with correct polarity: parallel wiring creates a 1-ohm final load, while series wiring creates a 4-ohm final load. Confirm that the amplifier is stable at the chosen load, use a low-pass filter, and set amplifier gain carefully to prevent clipping.\u003c\/p\u003e","brand":"GRAVITY","offers":[{"title":"Default Title","offer_id":47970400239779,"sku":"G7-15D2","price":321.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/91vCWdMd1mL.jpg?v=1786152784"},{"product_id":"gravity-g8bd2-dual-8-1200w-active-powered-car-sub-enclosure-ported-compact-subwoofer","title":"Gravity G8BD2 Dual 8\" Powered Ported Subwoofer Enclosure","description":"\u003cp\u003eThe Gravity G8BD2 is a self-powered car subwoofer enclosure designed to add low-frequency output without requiring a separate external amplifier. It combines two 8-inch subwoofers, an integrated amplifier, and a ported enclosure in one assembled package. This approach can simplify a bass upgrade for vehicles where adding multiple separate components is less practical.\u003c\/p\u003e\u003cp\u003eRated at 600 watts RMS and 1,200 watts maximum power, the G8BD2 is intended for listeners seeking a more substantial bass foundation from a compact dual-subwoofer layout. Its listed 30 Hz to 1 kHz frequency response covers the low-frequency range commonly handled by a vehicle subwoofer system. The powered design keeps amplification and enclosure components together.\u003c\/p\u003e\u003cp\u003eThe enclosure uses a ported configuration, which uses an opening in the cabinet to support low-frequency output. This design is paired with a listed enclosure air space of 3.5 cubic feet. The G8BD2 is specified as an enclosed powered subwoofer system for car-audio use.\u003c\/p\u003e\u003cp\u003eHeavy-duty MDF construction provides the enclosure structure for the dual-driver assembly. The cabinet measures 26.75 inches wide by 17 inches high by 14 inches deep, so measuring the intended cargo-area location before purchase is important. The listed product weight is 40 pounds.\u003c\/p\u003e\u003cp\u003eThe G8BD2 can be used with an existing car stereo as part of a complete vehicle-audio upgrade. Because it is an active enclosure, it still requires proper vehicle power, ground, turn-on, and audio-signal connections during installation. Confirm the available mounting space and have the installation planned around the vehicle's electrical and audio-system configuration.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 8-Inch Drivers:\u003c\/strong\u003e Two compact subwoofers are built into one enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Amplification:\u003c\/strong\u003e The enclosure is an active, powered subwoofer system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600W RMS Rating:\u003c\/strong\u003e Provides the listed continuous power rating for the system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,200W Maximum Power:\u003c\/strong\u003e Provides the listed maximum power-handling figure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorted Cabinet:\u003c\/strong\u003e Uses a vented enclosure design for bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-Duty MDF Construction:\u003c\/strong\u003e Provides a rigid cabinet structure for the enclosure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe G8BD2 combines two 8-inch subwoofers and integrated amplification in a heavy-duty MDF ported enclosure. Its listed cabinet dimensions are 26.75 x 17 x 14 inches, with a listed weight of 40 pounds. The system is specified with a single voice coil and 8-ohm DC resistance.\u003c\/p\u003e\u003cp\u003ePlan installation in a secure, ventilated vehicle location that accommodates the enclosure's full dimensions and allows access for wiring. A proper installation requires vehicle power, ground, remote turn-on, and an audio signal connection; the exact included accessories and connection types are not confirmed. Professional installation is advisable when vehicle wiring, signal integration, or secure mounting is needed.\u003c\/p\u003e","brand":"GRAVITY","offers":[{"title":"Default Title","offer_id":47970400272547,"sku":"G8BD2","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/pixelcut-export_17b58595-f25c-494a-b74c-69ea1a0e20bf.png?v=1786152786"},{"product_id":"gravity-audio-1200w-professional-12-power-car-subwoofer-4-ohm-imped-dual-voice-coil-gr-12pw","title":"Gravity GR-12PW 12\" Dual 4-Ohm Car Subwoofer","description":"\u003cp\u003eThe Gravity GR-12PW is a 12-inch car audio subwoofer designed to add dedicated low-frequency output to an aftermarket sound system. Its dual 4-ohm voice coil configuration provides wiring flexibility for matching a compatible mono or multi-channel amplifier. It is intended for listeners building or upgrading a system that needs stronger bass than typical full-range vehicle speakers can provide.\u003c\/p\u003e\u003cp\u003eWith a 600-watt RMS and 1,200-watt peak power rating, the GR-12PW is suited to amplification selected around its continuous power capability. Its stated 30 Hz to 2.5 kHz frequency response supports low-bass reproduction while allowing an external amplifier or processor to set the appropriate low-pass crossover. The 90 dB sensitivity rating indicates efficient output relative to input power.\u003c\/p\u003e\u003cp\u003eThe subwoofer uses a competition-grade pressed paper cone intended to keep the moving assembly responsive for bass playback. A high-roll foam surround supports cone travel while helping the driver reproduce lower frequencies. Together, these materials are designed for the demands of a dedicated automotive subwoofer installation.\u003c\/p\u003e\u003cp\u003eGravity specifies an advanced airflow cooling system to help manage heat during sustained use. Heat control is especially important when a subwoofer is driven near its rated continuous-power range. Proper gain setting and a clean amplifier signal remain important for reliable operation.\u003c\/p\u003e\u003cp\u003eThe GR-12PW can be used as the bass section of a custom car audio system with an external amplifier, enclosure, wiring, and source signal. Its two 4-ohm voice coils can be wired in parallel for a 2-ohm nominal load or in series for an 8-ohm nominal load. Choose the enclosure, amplifier, and wiring arrangement according to the amplifier manufacturer's supported impedance and power ratings.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-Inch Subwoofer:\u003c\/strong\u003e Adds dedicated bass capability to an aftermarket vehicle audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Supports series or parallel wiring options for compatible amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600W RMS Rating:\u003c\/strong\u003e Provides a continuous-power reference for amplifier matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed Paper Cone:\u003c\/strong\u003e Uses a lightweight cone material for responsive bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Roll Foam Surround:\u003c\/strong\u003e Supports cone movement during low-frequency playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow Cooling System:\u003c\/strong\u003e Helps manage heat during extended operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GR-12PW combines a competition-grade pressed paper cone with a high-roll foam surround and an advanced airflow cooling system. This construction focuses on the moving parts and thermal management needed for a dedicated bass driver. The driver is a passive, wired subwoofer and requires external amplification.\u003c\/p\u003e\u003cp\u003eInstall the GR-12PW in a properly sized enclosure and use an amplifier that is stable at the final impedance created by the voice-coil wiring. Wire its coils in parallel only when the amplifier supports a 2-ohm load; series wiring produces an 8-ohm nominal load. Set amplifier gain carefully, use an appropriate low-pass crossover, and verify mounting clearance before choosing an enclosure.\u003c\/p\u003e","brand":"GRAVITY","offers":[{"title":"Default Title","offer_id":47970400534691,"sku":"GR-12PW","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/714J0GXmghL.jpg?v=1786152799"},{"product_id":"gravity-audio-1600w-professional-15-power-car-subwoofer-4-ohm-imped-dual-voice-coil-gr-15pw","title":"Gravity GR-15PW 15\" Dual 4-Ohm Car Subwoofer","description":"\u003cp\u003eThe Gravity GR-15PW is a 15-inch car audio subwoofer built for systems that need dedicated low-frequency output. Its large driver format is intended to move substantial air while adding bass impact beyond typical factory speaker systems. It is suited to vehicle audio upgrades where an external amplifier and subwoofer enclosure are part of the build.\u003c\/p\u003e\u003cp\u003eThis model uses dual 4-ohm voice coils, giving installers wiring flexibility when matching the subwoofer to a compatible mono or multi-channel amplifier. The two coils may be wired in parallel for a 2-ohm final load or in series for an 8-ohm final load. Confirm that the amplifier is stable at the selected impedance before installation.\u003c\/p\u003e\u003cp\u003eThe GR-15PW is specified with 1,600 watts RMS power handling and 3,200 watts peak power handling. Its listed 30 Hz to 2.5 kHz frequency response and 90 dB sensitivity support use as a dedicated bass driver. For balanced system integration, use an amplifier or processor low-pass filter so the subwoofer receives the bass range it is designed to reproduce.\u003c\/p\u003e\u003cp\u003eA competition-grade pressed paper cone forms the main radiating surface, while a high-roll foam surround supports cone travel. This combination is designed to support low-frequency reproduction in a car audio enclosure. The subwoofer also uses an advanced airflow cooling system to help manage heat during extended operation.\u003c\/p\u003e\u003cp\u003eThe GR-15PW can be used in sealed or ported enclosure designs, depending on the desired balance of enclosure size, output, and bass character. A 15-inch subwoofer requires adequate mounting clearance and a rigid enclosure that is properly secured in the vehicle. It is a component subwoofer, so an amplifier, enclosure, wiring, and installation hardware are needed separately unless supplied by a particular bundle.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e15-Inch Subwoofer:\u003c\/strong\u003e Large driver area supports strong low-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Enables 2-ohm or 8-ohm series\/parallel wiring options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,600W RMS Handling:\u003c\/strong\u003e Supports use with a suitably matched external amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3,200W Peak Handling:\u003c\/strong\u003e Provides a stated short-term maximum power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed Paper Cone:\u003c\/strong\u003e Forms a lightweight cone for bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow Cooling System:\u003c\/strong\u003e Helps manage voice-coil heat during operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GR-15PW uses a competition-grade pressed paper cone, high-roll foam surround, dual voice-coil motor structure, and airflow cooling design. The cone and surround are designed for subwoofer duty, while the 15-inch frame requires a solid, accurately cut mounting baffle. Its published item weight is 20.6 pounds, so the enclosure and mounting surface should be robust enough to support it securely.\u003c\/p\u003e\u003cp\u003eInstall the GR-15PW in a properly sized sealed or ported enclosure with sufficient depth and clearance for the driver. Wire both 4-ohm voice coils correctly and use an amplifier rated for the resulting final impedance; parallel wiring produces 2 ohms, while series wiring produces 8 ohms. Use a low-pass filter and set amplifier gain carefully to avoid distortion or clipping.\u003c\/p\u003e","brand":"GRAVITY","offers":[{"title":"Default Title","offer_id":47970400600227,"sku":"GR-15PW","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/a_8be43f83-64a5-4e50-a10c-ae47ea3d0929.webp?v=1786152803"}],"url":"https:\/\/nsiexport.com\/collections\/component-subwoofers.oembed?page=8","provider":"NSI Export","version":"1.0","type":"link"}