{"title":"Cerwin Vega","description":null,"products":[{"product_id":"cerwin-vega-cer-bkx212s","title":"Cerwin Vega BKX212S Dual 12\" Sealed Bass Package","description":"\u003cp\u003eThe Cerwin Vega BKX212S is a complete bass package built around a dual 12-inch loaded sealed enclosure and a matching XED3001D monoblock amplifier. It provides a straightforward way to add dedicated low-frequency output to a factory or aftermarket car audio system. The preloaded enclosure reduces the need to select separate subwoofers, box, and amplifier components.\u003c\/p\u003e\u003cp\u003eThis package is intended for drivers who want a compact, coordinated bass upgrade for a trunk or cargo-area installation. Its sealed enclosure design is suited to controlled, defined bass response rather than a ported-box presentation. The system has a 2-ohm nominal final impedance and is rated for 300 watts RMS total.\u003c\/p\u003e\u003cp\u003eTwo 12-inch XED Series subwoofers are installed in the enclosure, creating a larger cone area than a single-subwoofer solution. The enclosure uses MDF construction and a sloped profile to support practical vehicle placement. Polypropylene cones, vented motor structures, poly-cotton spiders, and stamped Vega basket frames are part of the listed subwoofer design.\u003c\/p\u003e\u003cp\u003eThe included XED3001D amplifier is a compact Class D mono amplifier rated at 300 watts RMS at 2 ohms. It provides low-level and high-level input sensitivity ranges, allowing integration with many aftermarket receivers and compatible factory-radio installations. Adjustable low-pass, subsonic, and bass-boost controls support system setup for the vehicle and music preferences.\u003c\/p\u003e\u003cp\u003eThe BKX212S can serve as the bass foundation of a broader vehicle audio upgrade while leaving the front and rear speakers powered separately. Its amplifier includes signal-sensing remote turn-on, LED power\/protect indication, and thermal, overload, and speaker-short protection. A 4 AWG amplifier wiring kit is recommended by the manufacturer for installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 12-Inch XED Subwoofers:\u003c\/strong\u003e Provides a preloaded two-subwoofer bass solution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Enclosure:\u003c\/strong\u003e Supports controlled bass response in a compact package.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300-Watt RMS System:\u003c\/strong\u003e Matches the included amplifier's 2-ohm RMS output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXED3001D Mono Amplifier:\u003c\/strong\u003e Supplies dedicated Class D power for the enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Level Inputs:\u003c\/strong\u003e Helps integrate with compatible factory audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Bass Controls:\u003c\/strong\u003e Lets installers tailor crossover, subsonic, and boost settings.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe enclosure is specified with 3\/4-inch MDF construction, dual 12-inch subwoofers, and a sealed acoustic-suspension design. Listed subwoofer construction includes polypropylene cones, vented motor structures, poly-cotton spiders with woven tinsel wires, Unimount gasket surrounds, and stamped Vega basket frames. The included XED3001D amplifier uses an aluminum chassis and compact 6.3 x 4.7 x 1.8-inch dimensions.\u003c\/p\u003e\u003cp\u003eInstall the enclosure securely in a trunk, hatch, or cargo area with clearance for the enclosure's 25.9 x 11.8 x 10-inch lower-depth profile and 5.7-inch top depth. The amplifier can accept low-level or high-level signal connections; configure the low-pass filter, subsonic filter, and gain during setup. Cerwin Vega recommends a 4 AWG amplifier wiring kit, and the installation should include appropriate fused battery power, ground, remote-turn-on or signal-sensing setup, and correctly polarized speaker wiring.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970393882787,"sku":"CER-BKX212S","price":249.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/51XLx0EdvvL_f410d4b4-d5fe-4733-baa7-5fc2fbbb6954.jpg?v=1786152468"},{"product_id":"cerwin-vega-cer-cvp2","title":"Cerwin Vega CER-CVP2 2-Channel Digital Bass Enhancer","description":"\u003cp\u003eThe Cerwin Vega CER-CVP2 is a 2-channel line-output converter and digital bass enhancer for adding aftermarket amplification to a factory car-audio system. It accepts speaker-level signals from an OEM radio and provides RCA-level outputs for compatible amplifiers. This makes it useful when a factory head unit does not provide conventional preamp outputs.\u003c\/p\u003e\u003cp\u003eThe CVP2 is intended for listeners who want to retain their factory radio while adding an amplifier, subwoofer system, or expanded multi-amplifier setup. Its BaSS ReSet bass-compensation circuit is designed to address factory systems that reduce bass output as volume rises. The adjustable bass level and compensation controls allow the response to be tailored during setup.\u003c\/p\u003e\u003cp\u003eWith a maximum speaker-level input rating of 400 watts per channel at 4 ohms, the processor is built for integration with higher-powered factory speaker outputs. It supplies up to 9.5V RMS of preamp output, helping provide a strong signal to connected amplifiers. Separate bass and main RCA outputs support systems using a dedicated bass amplifier alongside a full-range amplifier.\u003c\/p\u003e\u003cp\u003eThe CER-CVP2 includes a dash-mounted level remote for convenient bass-level adjustment from the driver’s seat. The remote control range is specified from 0 dB to -19 dB. A selectable auto-on function and 12V trigger output simplify integration with many factory-radio installations.\u003c\/p\u003e\u003cp\u003eThis processor fits between the source unit and amplifier stage of a vehicle audio upgrade. It can be used with speaker-level input from the radio or with a pre-out signal connection, depending on the system layout. Proper gain setting and bass-compensation adjustment are important for balanced output and clean operation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Channel Line Output Converter:\u003c\/strong\u003e Converts compatible speaker-level signals to RCA-level outputs for amplifier integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBaSS ReSet Compensation:\u003c\/strong\u003e Helps restore bass response reduced by some factory audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e400W Speaker-Level Input:\u003c\/strong\u003e Accepts up to 400 watts per channel at 4 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual RCA Output Sections:\u003c\/strong\u003e Provides separate fixed main and variable bass output pairs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDash Level Remote:\u003c\/strong\u003e Lets the driver adjust bass level from 0 dB to -19 dB.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Auto-On:\u003c\/strong\u003e Supports automatic turn-on integration with compatible OEM systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVP2 uses a compact external-processor layout with clearly separated speaker-input, power, remote, signal-controller, and RCA connection sections. Its control arrangement includes Bass Level, Main Level, and BaSS ReSet adjustments, plus dedicated bass and main output pairs. Cerwin Vega does not publish a chassis-material specification for this model.\u003c\/p\u003e\u003cp\u003eInstall the CVP2 between the radio signal source and aftermarket amplifier or amplifiers, using either speaker-level input or the applicable pre-out connection method. Connect fused 12V power, ground, remote wiring, and RCA outputs according to the system design; the manufacturer recommends a 1-amp fuse. Set amplifier gains and BaSS ReSet compensation after installation, and use the included dash remote for routine bass-level changes.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970393915555,"sku":"CER-CVP2","price":38.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/51vHbudvb5L.jpg?v=1786152470"},{"product_id":"cerwin-vega-cer-hs10dv4","title":"Cerwin Vega CER-HS10DV4 10\" Shallow DVC Subwoofer","description":"\u003cp\u003eThe Cerwin-Vega CER-HS10DV4 is a 10-inch shallow-mount car subwoofer designed to add low-frequency output where installation depth is limited. Its compact profile makes it suitable for shallow truck boxes, under-seat enclosures, and space-conscious trunk installations. Dual 4-ohm voice coils provide wiring flexibility when matching the subwoofer to a compatible amplifier.\u003c\/p\u003e\u003cp\u003eThis HED Slim Series subwoofer is intended for listeners who want a dedicated bass upgrade without committing to a deep enclosure. Its 350-watt RMS power rating supports use in a properly matched amplified subwoofer system. The 10-inch format balances compact enclosure compatibility with meaningful bass reinforcement.\u003c\/p\u003e\u003cp\u003eThe CER-HS10DV4 uses a hybrid polypropylene and treated-paper cone structure to support controlled cone movement. Its treated foam surround is designed to allow excursion while supporting the cone assembly. With an 8 mm Xmax specification, it is engineered for low-frequency duty rather than full-range speaker use.\u003c\/p\u003e\u003cp\u003eA ferrite motor structure and stamped-steel basket provide the foundation for the driver assembly. The 2.5-inch voice coils are configured as a dual-voice-coil design, enabling series or parallel wiring options. This makes the subwoofer adaptable to amplifiers designed for either a 2-ohm or 8-ohm final load from one driver.\u003c\/p\u003e\u003cp\u003eThe CER-HS10DV4 can be incorporated into sealed or ported custom enclosures, depending on the system goal and enclosure design. Its 3.74-inch mounting depth helps address installations with limited clearance behind the mounting surface. Pair it with a compatible mono or multi-channel amplifier used within the subwoofer's RMS power capability.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow-Mount 10-Inch Design:\u003c\/strong\u003e Fits installations where conventional subwoofer depth is limited.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Supports flexible series or parallel amplifier wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e350W RMS Handling:\u003c\/strong\u003e Accommodates a properly matched amplified bass system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid Cone Construction:\u003c\/strong\u003e Combines polypropylene and treated paper in the cone assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreated Foam Surround:\u003c\/strong\u003e Supports cone travel for low-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFerrite Motor Structure:\u003c\/strong\u003e Provides magnetic control for the moving assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe subwoofer uses a stamped-steel basket, ferrite magnet structure, treated foam surround, and 2.5-inch voice coils. Its round 10-inch driver format has a 10.35-inch overall diameter and a 4.33-inch overall height. The shallow 3.74-inch mounting depth is intended to simplify fitment in compact enclosure designs.\u003c\/p\u003e\u003cp\u003eConfirm the enclosure's mounting cutout and rear clearance before installation, and use an enclosure designed for a 10-inch shallow subwoofer. The dual 4-ohm coils may be wired in parallel for a 2-ohm final load or in series for an 8-ohm final load; amplifier stability must match the selected load. Use a compatible amplifier and set gain conservatively to keep operation aligned with the 350-watt RMS rating.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970393948323,"sku":"CER-HS10DV4","price":88.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61K_MYTfzdL.jpg?v=1786152472"},{"product_id":"cerwin-vega-cer-v10dv4","title":"Cerwin Vega CER-V10DV4 10\" Dual 4-Ohm Voice Coil Subwoofer","description":"\u003cp\u003eThe Cerwin-Vega CER-V10DV4 is a 10-inch VEGA Series car audio subwoofer built for systems that need dedicated low-frequency output. Its dual 4-ohm voice coil design supports flexible amplifier matching while retaining the compact footprint of a 10-inch driver. It is intended for use with an external amplifier and a properly designed subwoofer enclosure.\u003c\/p\u003e\u003cp\u003eThis model suits listeners upgrading a factory system as well as builders planning a custom bass-focused installation. With 1,000 watts RMS and 3,000 watts maximum power handling, it is designed for high-power car audio applications. The 86 dB sensitivity specification and 47 Hz free-air resonance provide useful data for system and enclosure planning.\u003c\/p\u003e\u003cp\u003eThe CER-V10DV4 uses a hybrid carbon fiber and polypropylene diaphragm construction for a balance of rigidity and responsiveness. Its Santoprene surround is designed to support cone travel during demanding bass passages. The result is controlled low-frequency reproduction for music systems that prioritize substantial bass output.\u003c\/p\u003e\u003cp\u003eA ferrite motor structure provides the magnetic drive behind the woofer, while the 3-inch voice coil is built for the model's stated power handling. The cast aluminum basket provides a rigid mounting structure for the driver assembly. Cerwin-Vega also specifies a single-terminal impedance selector to simplify system configuration.\u003c\/p\u003e\u003cp\u003eThe CER-V10DV4 can serve as the foundation of a single-subwoofer setup or as part of a larger multi-subwoofer system. Its 4+4-ohm dual-voice-coil configuration gives installers options when matching the load to a compatible amplifier. Confirm enclosure volume, available mounting clearance, and final amplifier impedance before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Subwoofer:\u003c\/strong\u003e Adds dedicated low-frequency output to a vehicle audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Provides flexibility when matching a compatible amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,000W RMS Handling:\u003c\/strong\u003e Supports use in high-power amplified bass systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid Composite Diaphragm:\u003c\/strong\u003e Combines carbon fiber and polypropylene construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSantoprene Surround:\u003c\/strong\u003e Supports cone movement and long-term durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-Terminal Impedance Selector:\u003c\/strong\u003e Helps streamline system configuration during installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CER-V10DV4 combines a cast aluminum basket, ferrite motor, 3-inch voice coil, and Santoprene surround. Its diaphragm uses carbon fiber and polypropylene materials, and the driver has an overall diameter of 10.89 inches. The subwoofer requires a mounting depth of 5.94 inches and a 9.17-inch cutout.\u003c\/p\u003e\u003cp\u003eUse this passive subwoofer with an external amplifier matched appropriately to its dual 4-ohm voice coils and stated 1,000-watt RMS power handling. Plan the enclosure and wiring configuration before mounting, and verify that the 6.69-inch overall height will clear surrounding vehicle structures. The manufacturer lists an integrated impedance selector, but amplifier compatibility should still be confirmed before final wiring.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970393981091,"sku":"CER-V10DV4","price":149.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71kJ1wVBhfL_fd679084-5e49-4fef-99da-8a7094b967db.jpg?v=1786152474"},{"product_id":"cerwin-vega-cer-v65","title":"Cerwin Vega CER-V65 6.5\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin Vega V65 is a pair of 6.5-inch, 2-way coaxial car speakers designed for factory-speaker replacement and general system upgrades. Its coaxial layout combines the woofer and tweeter in each speaker for a compact installation. The set is intended for vehicles that use compatible 6.5-inch speaker locations.\u003c\/p\u003e\u003cp\u003eWith 120 watts RMS and 360 watts maximum power handling, the V65 is suited to systems using an aftermarket amplifier or a capable head unit. Its 4-ohm nominal impedance is common in car audio applications. The 88 dB sensitivity and 89 Hz to 20 kHz frequency response describe a balanced full-range speaker intended to cover midbass, midrange, and treble duties.\u003c\/p\u003e\u003cp\u003eA hybrid carbon fiber and polypropylene cone provides the woofer diaphragm, while a Santoprene rubber surround supports cone movement. This construction is designed to combine rigidity with durability in an automotive environment. A strontium ferrite woofer magnet supports the low-frequency driver assembly.\u003c\/p\u003e\u003cp\u003eThe V65 uses a dynamically balanced silk dome tweeter with a neodymium magnet for high-frequency reproduction. An integrated crossover directs frequencies between the woofer and tweeter. Built-in tweeter protection is included to help safeguard the high-frequency section during operation.\u003c\/p\u003e\u003cp\u003eFor a practical upgrade path, the V65 can be used as a replacement pair in compatible front or rear factory locations. The speakers include mesh steel grilles and speaker fitment adapters, which can be useful when installing in custom panels or non-factory mounting locations. Confirm the vehicle's available mounting depth, cutout size, wiring polarity, and amplifier compatibility before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch 2-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter functions in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120W RMS Power Handling:\u003c\/strong\u003e Supports use with appropriately matched aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid Carbon Fiber\/Polypropylene Cone:\u003c\/strong\u003e Provides a rigid, durable woofer diaphragm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSantoprene Rubber Surround:\u003c\/strong\u003e Supports cone excursion and long-term durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilk Dome Tweeter:\u003c\/strong\u003e Handles high frequencies with a neodymium tweeter magnet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Crossover Protection:\u003c\/strong\u003e Directs frequencies and protects the tweeter section.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe V65 uses a powder-coated, rigid stamped steel basket to support the speaker assembly. Its hybrid carbon fiber\/polypropylene cone, Santoprene rubber surround, silk dome tweeter, neodymium tweeter magnet, and strontium ferrite woofer magnet are part of the Vega Series design. Mesh steel grilles are included for installations where the speaker face needs protection.\u003c\/p\u003e\u003cp\u003eCheck the vehicle's speaker opening against the 4.88-inch cutout diameter, 6.26-inch overall diameter, and 1.79-inch mounting depth before purchase. Mount the speaker securely on a flat baffle and maintain a good seal around the frame to help separate front and rear sound waves. Use proper polarity and pair the speakers with an amplifier or source compatible with a 4-ohm load and the stated power-handling rating.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970394013859,"sku":"CER-V65","price":91.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71kQjnzqeQL.jpg?v=1786152476"},{"product_id":"cerwin-vega-cer-cv15bt","title":"Cerwin Vega CV15BT Single DIN Bluetooth Multimedia Receiver","description":"\u003cp\u003eThe Cerwin Vega CV15BT is a Single DIN multimedia receiver for vehicles that need modern music playback, Bluetooth calling, and AM\/FM radio in a compact dashboard format. It is designed as a digital-media head unit with USB, SD card, and 3.5 mm auxiliary inputs. This makes it a practical replacement for an older factory radio or a basic source unit for a custom car-audio installation.\u003c\/p\u003e\u003cp\u003eBuilt-in Bluetooth 4.0 supports wireless audio streaming and hands-free phone calls through the receiver's integrated microphone. The unit uses the pairing name “CV15BT” when connecting a compatible mobile device. It supports A2DP for Bluetooth audio and AVRCP for compatible playback control.\u003c\/p\u003e\u003cp\u003eThe CV15BT provides 50 watts maximum output across each of its four channels and is specified for 4-ohm speakers. Preset EQ modes allow listeners to choose a sound setting that suits their music and system. For radio listening, the receiver includes an AM\/FM tuner with station presets.\u003c\/p\u003e\u003cp\u003eFor expanded systems, the receiver includes three pairs of 5V preamp outputs for front, rear, and subwoofer amplifier connections. This layout lets the unit serve as a control center for externally amplified speakers and a subwoofer. Its dedicated front, rear, and subwoofer outputs provide flexibility when planning a staged system upgrade.\u003c\/p\u003e\u003cp\u003eThe front panel combines a digital LED-backlit display with USB, SD card, and AUX access for straightforward daily use. It plays MP3 and WMA files from USB or SD media, but it does not play video files or display images. A wireless remote control is included for additional operation convenience.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle DIN Chassis:\u003c\/strong\u003e Fits a standard Single DIN dashboard opening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth 4.0:\u003c\/strong\u003e Streams audio and supports hands-free calling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In Microphone:\u003c\/strong\u003e Enables phone conversations through the receiver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5V Preamp Outputs:\u003c\/strong\u003e Supports external front, rear, and subwoofer amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB, SD, and AUX:\u003c\/strong\u003e Provides several wired music-source options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAM\/FM Tuner:\u003c\/strong\u003e Keeps local radio listening available in the system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CV15BT uses a compact Single DIN chassis with a digital LED-backlit display, front-panel media connections, a rotary control, preset buttons, and an SD card slot. Its front panel also includes a dedicated USB charging connection. The receiver includes a wireless remote control, while its standard dashboard-oriented layout keeps commonly used controls accessible from the front of the unit.\u003c\/p\u003e\u003cp\u003eInstallation uses the receiver's ISO speaker and power connections, with front, rear, and subwoofer RCA preamp outputs available for amplifier wiring. The manufacturer specifies a 12V DC vehicle electrical system, a maximum current draw of 10A, and a mounting angle below 30 degrees. Confirm vehicle-specific dash fitment, antenna adaptation, harness compatibility, and any needed installation hardware before purchase.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970394046627,"sku":"CER-CV15BT","price":37.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/51jDw3_E1JL.jpg?v=1786152478"},{"product_id":"cerwin-vega-cer-cvp1400-4","title":"Cerwin Vega CVP1400.4 4-Channel Class D Car Amplifier","description":"\u003cp\u003eThe Cerwin Vega CVP1400.4 is a compact four-channel Class D car amplifier designed to add dedicated power to a factory or aftermarket audio system. It is suited to powering front and rear speakers, component sets, or two bridged speaker channels where a system calls for higher output. Its small chassis helps address installations where conventional amplifiers may be difficult to place.\u003c\/p\u003e\u003cp\u003eRated for 80 watts RMS per channel at 4 ohms and 140 watts RMS per channel at 2 ohms, the CVP1400.4 provides a practical power range for many car-audio speakers. It can also be bridged to deliver 290 watts RMS to each of two 4-ohm loads. This flexibility allows the amplifier to serve as a four-speaker amplifier or as part of a more focused two-channel system.\u003c\/p\u003e\u003cp\u003eClass D operation supports efficient power delivery in a compact enclosure. The amplifier uses a full MOSFET DC-DC PWM power supply, a double-sided two-layer circuit board, and surface-mount-device technology. Its frequency response extends from 10 Hz to 30 kHz, supporting full-range speaker applications.\u003c\/p\u003e\u003cp\u003eIntegration is supported through both low-level and high-level input capability. The high-level input includes auto turn-on operation for compatible 4V to 8V speaker-level signals, helping the amplifier work with many factory radios without requiring a separate line-output converter. Variable high-pass and low-pass filters allow each channel pair to be configured for the connected speakers.\u003c\/p\u003e\u003cp\u003eThe CVP1400.4 is a useful upgrade path for listeners who want more headroom and control than a radio's built-in amplifier can provide. It supports 2-ohm stereo loads and 4-ohm bridged loads, so speaker selection and wiring should be planned around those minimum impedances. Built-in protection provisions help safeguard the amplifier against short-circuit, low-impedance, reverse-polarity, and overheating conditions.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Channel Class D Design:\u003c\/strong\u003e Powers up to four speakers from a compact amplifier chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e80W x 4 RMS at 4 Ohms:\u003c\/strong\u003e Provides dedicated full-range power for compatible speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Stable Stereo Operation:\u003c\/strong\u003e Delivers up to 140W RMS per channel at 2 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridgeable Channel Pairs:\u003c\/strong\u003e Supports 290W RMS x 2 into 4-ohm bridged loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Level Inputs with Auto Turn-On:\u003c\/strong\u003e Helps integrate the amplifier with compatible factory radio outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable HPF and LPF:\u003c\/strong\u003e Lets you tailor frequency range to the speakers being used.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVP1400.4 uses a compact 7.28-inch by 4.92-inch by 1.93-inch chassis. Its construction includes a full MOSFET DC-DC PWM power supply, double-sided two-layer PCB, and SMD technology. Power and protection indicators provide operating-status feedback, while the protection system addresses short circuit, low impedance, reverse polarity, and overheating conditions.\u003c\/p\u003e\u003cp\u003eMount the amplifier on a solid surface with adequate ventilation and access to the side-panel controls. Use 2-ohm-or-higher stereo speaker loads or 4-ohm-or-higher bridged loads, and configure the high-pass or low-pass filters to suit the speakers. The manual specifies a negative-ground 12V DC vehicle electrical system, recommends a minimum of 8 AWG power and ground wiring, and states that the terminals accept up to 4 AWG cable.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970394079395,"sku":"CER-CVP1400-4","price":98.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/51Eu2usVBSL.jpg?v=1786152479"},{"product_id":"cerwin-vega-cer-cvpm10001d","title":"Cerwin Vega CVPM10001D Mini Mono Class D Amplifier","description":"\u003cp\u003eThe Cerwin Vega CVPM10001D is a compact mono car amplifier designed to power a subwoofer system without requiring a large amplifier mounting footprint. Its single-channel Class D design delivers 500 watts RMS at 2 ohms or 310 watts RMS at 4 ohms. It is a practical choice for adding controlled low-frequency output to an aftermarket car audio system.\u003c\/p\u003e\u003cp\u003eThis amplifier is intended for listeners building a dedicated bass channel alongside factory or aftermarket full-range speakers. The variable low-pass crossover lets the amplifier focus on bass frequencies while the main speakers handle mids and highs. Its 2-ohm mono stability provides flexibility when selecting and wiring compatible subwoofers.\u003c\/p\u003e\u003cp\u003eFull Class D topology and a full PWM power supply support efficient operation in a small chassis. The amplifier is rated for 0.1% THD at 1 kHz and 4 ohms, with a damping factor greater than 70. A variable Vega Bass Boost control can add up to 12 dB at 45 Hz when used carefully with a suitable subwoofer and enclosure.\u003c\/p\u003e\u003cp\u003eThe CVPM10001D provides both high-level and low-level signal input capability, allowing integration with many factory and aftermarket source units. Its input sensitivity range is 0.15V to 6.0V, and the low-level input impedance is 20 kOhms. A remote level-control port supports convenient adjustment of the bass channel from the cabin when a compatible remote control is used.\u003c\/p\u003e\u003cp\u003eMeasuring just 7.64 inches long, the amplifier can fit in many under-seat, trunk, or custom-panel installations where space is limited. The compact housing includes an ambient backlit Cerwin Vega logo, plus power and protection indication. Use it with a correctly wired 2-ohm or 4-ohm subwoofer load, appropriate vehicle power wiring, and an inline fuse near the battery.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMono Class D Output:\u003c\/strong\u003e Delivers dedicated subwoofer power from a compact one-channel amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W RMS at 2 Ohms:\u003c\/strong\u003e Supports compatible 2-ohm subwoofer configurations with 500 watts RMS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Low-Pass Filter:\u003c\/strong\u003e Adjusts bass-channel cutoff from 35 Hz to 500 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVega Bass Boost:\u003c\/strong\u003e Adds adjustable low-frequency boost up to 12 dB at 45 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh- and Low-Level Inputs:\u003c\/strong\u003e Connects to speaker-level or RCA-level source signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Mini Chassis:\u003c\/strong\u003e Helps simplify installation where amplifier space is limited.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVPM10001D uses a compact metal amplifier chassis with Full Class D circuitry, internal ATM mini fuses, status indicators, and an ambient backlit logo. Side-panel controls provide access to gain, low-pass crossover, and bass-boost adjustments. The amplifier measures 7.64 x 3.7 x 1.47 inches (194 x 95 x 37.3 mm).\u003c\/p\u003e\u003cp\u003eMount the amplifier on a solid, ventilated surface away from heat, moisture, vibration, and combustible materials. Cerwin Vega recommends a minimum 8-gauge power and ground connection, with 4-gauge wiring recommended for monoblock amplifiers; use an external fuse close to the vehicle battery and match the speaker load to the amplifier's 2-ohm or 4-ohm mono capability. Begin subwoofer low-pass tuning around 80 to 120 Hz, then set gain conservatively to avoid audible distortion.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970394112163,"sku":"CER-CVPM10001D","price":112.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61zVwmHbrtL.jpg?v=1786152481"},{"product_id":"cerwin-vega-cer-s9750-1d","title":"Cerwin Vega S91100.5D 5-Channel Class-D Amplifier","description":"\u003cp\u003eThe Cerwin Vega S91100.5D is a Stroker Series five-channel full-range Class-D car amplifier designed to power a complete speaker-and-subwoofer system from one chassis. It provides dedicated amplification for front and rear speakers along with a low-frequency channel for a subwoofer. This makes it a practical option for vehicle audio upgrades that need both cabin sound and bass without adding separate amplifiers.\u003c\/p\u003e\u003cp\u003eFor full-range channels, the S91100.5D is rated at 90 watts RMS x 4 at 4 ohms or 150 watts RMS x 4 at 2 ohms. Its subwoofer section is rated at 150 watts RMS x 2 at 4 ohms or 250 watts RMS x 1 at 2 ohms. The front or rear full-range channels can also be bridged to provide 300 watts RMS x 2 at 4 ohms, while the subwoofer channels can be bridged for 500 watts RMS x 1 at 4 ohms.\u003c\/p\u003e\u003cp\u003eThe amplifier uses a full PWM power supply and full-range Class-D topology to combine multi-channel output with a compact 2-inch-tall chassis. It has a 10.0 to 17.0 VDC operating threshold and an idle-current specification of 0.7A. Its measured specification set includes 0.03% THD at 1 kHz and 4 ohms, plus an A-weighted signal-to-noise ratio of -96.7 dBA at full power.\u003c\/p\u003e\u003cp\u003eSystem tuning is supported by selectable full-range, high-pass, and low-pass crossover modes for channels 1 through 4. Variable high-pass and low-pass crossover adjustments cover 35 Hz to 350 Hz at 12 dB per octave. A variable bass boost and phase control allow the low-frequency output to be adjusted for the subwoofer installation and listening preferences.\u003c\/p\u003e\u003cp\u003eThe S91100.5D works with aftermarket head units through RCA connections and can also accept speaker-level input for many factory-radio integrations. Its input configuration can accept two-, four-, or five-channel input arrangements, and selectable REM, DC-offset, and VOX turn-on modes add installation flexibility. A wired bass remote is included for convenient subwoofer-level adjustment from the cabin.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive-Channel System Power:\u003c\/strong\u003e Runs front, rear, and subwoofer channels from one amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-Range Class-D Topology:\u003c\/strong\u003e Delivers efficient multi-channel amplification in a compact chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Stereo Stability:\u003c\/strong\u003e Supports compatible stereo speaker loads down to 2 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridged Channel Capability:\u003c\/strong\u003e Allows higher-power configurations with 4-ohm bridged loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Signal Integration:\u003c\/strong\u003e Accepts RCA or speaker-level input signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Bass Remote:\u003c\/strong\u003e Enables convenient adjustment of subwoofer output level.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe amplifier has a black Stroker Series enclosure with a top-mounted illuminated logo, top-access controls, and status\/protection indication. Its full PWM supply, 4-layer PCB construction, and compact layout are intended for vehicle audio installations where space and heat management matter. The chassis measures 14.1 x 7.25 x 2.0 inches.\u003c\/p\u003e\u003cp\u003eMount the amplifier securely to a solid vehicle panel or amplifier rack, with adequate ventilation and access to its controls and connections. Use a properly fused power lead within 18 inches of the battery, match the ground-wire gauge to the power wire, and keep signal cables separated from power wiring where possible. The amplifier accepts up to 4 AWG power and ground cable, while the manufacturer manual specifies a minimum of 8 AWG and lists a 90A battery fuse rating for this model.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970394210467,"sku":"CER-S9750-1D","price":282.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/51dhARrQlnL.jpg?v=1786152483"},{"product_id":"cerwin-vega-cer-st69cx","title":"Cerwin Vega ST69CX 6x9\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin Vega ST69CX is a pair of 6x9-inch, 2-way coaxial speakers built for high-output vehicle, marine, and motorsport audio applications. It combines a full-range woofer and centrally mounted titanium dome tweeter in each speaker, simplifying upgrades where space is limited. The 4-ohm design suits systems designed for standard aftermarket speaker loads.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for listeners who want stronger low-frequency presence and clear upper-frequency detail from a 6x9-inch location. Their 45 Hz to 23 kHz frequency response supports bass, midrange, and treble reproduction from a single coaxial assembly. With 125 watts RMS handling per speaker, they are appropriate for amplifier-powered systems that are correctly matched for power and impedance.\u003c\/p\u003e\u003cp\u003eA UV-treated, thermal-molded waterproof Kevlar fiber cone and rubber surround support use in exposed environments. The speaker system is described as IPX65 marine-grade compliant and salt-resistant, making it suitable for installations where moisture, sun, and changing weather are considerations. These materials also provide a durable foundation for daily on-road and off-road use.\u003c\/p\u003e\u003cp\u003eEach ST69CX uses a 1-inch titanium dome tweeter to reproduce high frequencies, while the woofer uses a 1.4-inch high-temperature voice coil for power handling. A 12 dB Bessel crossover network divides the signal between the woofer and tweeter. The high-energy ferrite motor system, milled aluminum top plate, and vented T-yoke back plate are designed to support heat management during higher-output listening.\u003c\/p\u003e\u003cp\u003eThe ST69CX works well as a replacement or upgrade for compatible 6x9-inch speaker locations with sufficient mounting clearance. It can be used with a compatible factory radio, though an external amplifier matched to its 125-watt RMS-per-speaker rating can provide greater output capability. Verify the 8.875 x 6.125-inch cutout requirement and 3.875-inch mounting depth before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter performance in each speaker location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e125W RMS Per Speaker:\u003c\/strong\u003e Supports amplifier-powered systems with properly matched output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Titanium Dome Tweeter:\u003c\/strong\u003e Reproduces detailed high-frequency information.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKevlar Fiber Cone:\u003c\/strong\u003e Uses a UV-treated, waterproof cone construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Grade Construction:\u003c\/strong\u003e IPX65-compliant design supports exposed-use installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 dB Bessel Crossover:\u003c\/strong\u003e Directs appropriate frequencies to each driver.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ST69CX uses a high-temperature cast aluminum basket, rubber surround, ferrite motor system, milled aluminum top plate, and T-yoke back plate. Its woofer cone is made from UV-treated thermal-molded waterproof Kevlar fiber, while the integrated tweeter uses a titanium dome. Removable black trim rings or grilles are included.\u003c\/p\u003e\u003cp\u003eUse the speakers only where the mounting opening measures approximately 8.875 x 6.125 inches and where at least 3.875 inches of mounting depth is available. The package includes a pair of speakers plus stainless mounting screws and machine bolts with nuts and washers. Match the amplifier or head-unit speaker output to the speakers' 4-ohm nominal impedance, and avoid exceeding their rated power handling.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970394243235,"sku":"CER-ST69CX","price":205.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61PR523ck1L.jpg?v=1786152485"},{"product_id":"cerwin-vega-cer-v6525c","title":"Cerwin Vega V6525C 6.5\" 3-Way Component Speakers","description":"\u003cp\u003eThe Cerwin Vega V6525C is a 6.5-inch, 3-way component speaker system designed for vehicle owners replacing factory speakers with a more complete front-stage setup. It separates low, midrange, and high-frequency reproduction across dedicated drivers rather than combining them in one speaker. This configuration is suited to installations where clearer placement of vocals, instruments, and high frequencies is important.\u003c\/p\u003e\u003cp\u003eEach set combines 6.5-inch woofers, 2.5-inch midrange speakers, and 1-inch silk dome tweeters. The dedicated midrange driver helps cover the vocal and instrumental range while the separate tweeter handles upper-frequency detail. Passive crossover networks route the signal to the appropriate driver and include tweeter protection.\u003c\/p\u003e\u003cp\u003eThe V6525C is rated for 140 watts RMS and 420 watts maximum power handling, with a 4-ohm nominal impedance. Its specified frequency response is 89 Hz to 20 kHz, and sensitivity is rated at 88 dB at 1 watt\/1 meter. These ratings make it important to match the system with an appropriately configured source unit or amplifier.\u003c\/p\u003e\u003cp\u003eHybrid carbon fiber and polypropylene cones are used for the woofer and midrange drivers, while Santoprene rubber surrounds support driver excursion. The tweeters use dynamically balanced silk domes and neodymium magnets. A strontium ferrite woofer magnet and rigid stamped-steel basket support the main driver assembly.\u003c\/p\u003e\u003cp\u003eThis component set is intended for custom or upgraded vehicle speaker locations where separate woofer, midrange, tweeter, and crossover placement can be accommodated. The supplied fitment adapters and mesh steel grilles support installation flexibility. It can serve as the foundation of a front-speaker upgrade when paired with correct wiring, secure mounting, and amplifier power appropriate for its rating.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Way Component Layout:\u003c\/strong\u003e Separate woofer, midrange, and tweeter drivers cover distinct frequency ranges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e140W RMS Power Handling:\u003c\/strong\u003e Supports amplification matched to the system's continuous power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid Composite Cones:\u003c\/strong\u003e Carbon fiber and polypropylene cone construction supports responsive driver operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilk Dome Tweeters:\u003c\/strong\u003e Dynamically balanced 1-inch tweeters reproduce upper-frequency detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtected Passive Crossovers:\u003c\/strong\u003e Integrated crossovers divide frequencies and include tweeter protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Accessories Included:\u003c\/strong\u003e Mesh steel grilles and speaker fitment adapters are supplied.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe V6525C uses hybrid carbon fiber\/polypropylene cones, Santoprene rubber surrounds, neodymium tweeter magnets, strontium ferrite woofer magnets, and powder-coated stamped-steel baskets. The woofer measures 6.5 inches nominally and has a 1.79-inch mounting depth. Its listed cutout diameter is 4.88 inches, overall diameter is 6.26 inches, and overall height is 2.15 inches.\u003c\/p\u003e\u003cp\u003ePlan mounting locations for the 6.5-inch woofers, 2.5-inch midrange drivers, 1-inch tweeters, and two passive crossover networks before installation. Connect the amplifier or source output to the crossover input, then connect the labeled woofer, midrange, and tweeter outputs while observing polarity. For flush-mounted tweeters, the manual specifies a 1.85-inch round opening and at least 1 inch of clearance behind the panel.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970394276003,"sku":"CER-V6525C","price":205.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61L5xDBTz1L.jpg?v=1786152487"},{"product_id":"cerwin-vega-cer-v65dv4","title":"Cerwin Vega V65DV4 6.5\" Dual 4-Ohm Car Subwoofer","description":"\u003cp\u003eThe Cerwin Vega V65DV4 is a compact 6.5-inch car audio subwoofer designed to add dedicated low-frequency output where installation space is limited. Its dual 4-ohm voice coil design gives system builders wiring flexibility for compatible mono amplifiers. It is a passive subwoofer and requires an external amplifier and enclosure or mounting solution appropriate for the installation.\u003c\/p\u003e\u003cp\u003eWith a 500-watt RMS and 1,500-watt maximum power rating, the V65DV4 is intended for systems that need more bass capacity than factory full-range speakers can provide. Its 82 dB sensitivity and 74 Hz resonant frequency describe a compact driver built for a focused subwoofer role. Proper amplifier setup, crossover configuration, and enclosure design remain important to overall results.\u003c\/p\u003e\u003cp\u003eThe V65DV4 uses a hybrid carbon fiber and polypropylene diaphragm construction. This combines polypropylene with carbon fiber material to create a cone designed for controlled movement under load. A stitch-reinforced Santoprene surround supports the driver’s 6.5 mm Xmax specification.\u003c\/p\u003e\u003cp\u003eA ferrite motor structure supplies the magnetic system behind the voice coil assembly. The subwoofer also uses a cast aluminum basket, providing a rigid mounting foundation for the driver components. Its 2.5-inch voice coil is paired with dual 4-ohm coils for series or parallel wiring.\u003c\/p\u003e\u003cp\u003eThis model fits a custom bass upgrade path for vehicles with limited mounting depth or available enclosure volume. Dual 4-ohm coils can be wired for a 2-ohm parallel load or an 8-ohm series load, provided the amplifier is rated for the selected load. It can be used as a single compact subwoofer or as part of a multi-subwoofer system when amplifier loading and total power handling are planned correctly.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Subwoofer:\u003c\/strong\u003e Compact driver size supports space-conscious car audio builds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Allows 2-ohm parallel or 8-ohm series wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W RMS Handling:\u003c\/strong\u003e Supports amplifier matching within its continuous power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid Cone:\u003c\/strong\u003e Carbon fiber and polypropylene diaphragm materials support controlled cone movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSantoprene Surround:\u003c\/strong\u003e Stitch-reinforced surround supports the driver’s excursion capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFerrite Motor:\u003c\/strong\u003e Magnetic motor structure drives the 2.5-inch voice coil.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe V65DV4 combines a cast aluminum basket, ferrite magnet structure, hybrid carbon fiber\/polypropylene diaphragm, and stitch-reinforced Santoprene surround. These materials form the subwoofer’s moving assembly and support structure. The driver has a 6.95-inch overall diameter, 5.28-inch overall height, and 4.65-inch mounting depth.\u003c\/p\u003e\u003cp\u003eConfirm a 5.75-inch cutout and at least 4.65 inches of mounting depth before installation. Both voice coils must be connected to the amplification source; wire the dual 4-ohm coils in parallel for a 2-ohm load or in series for an 8-ohm load. Use an amplifier stable at the chosen impedance, set a suitable low-pass crossover, and follow the enclosure and wiring guidance for the complete system.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970394308771,"sku":"CER-V65DV4","price":78.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/617NkKpxtiL.jpg?v=1786152489"},{"product_id":"cerwin-vega-cer-v68c","title":"Cerwin Vega V68C 6×8\" 2-Way Component Speakers","description":"\u003cp\u003eThe Cerwin Vega V68C is a 6×8-inch, 2-way component speaker system designed for vehicles that use an oval 6×8-inch speaker location. It separates the woofer and 1-inch tweeter to support more flexible placement than a coaxial speaker design. This makes it a practical upgrade path for listeners looking to improve front-stage detail while retaining a vehicle-specific 6×8-inch fitment.\u003c\/p\u003e\u003cp\u003eThe system combines a 6×8-inch woofer with a 1-inch dynamically balanced silk dome tweeter for full-range reproduction. Its published frequency response is 70 Hz to 20 kHz, covering mid-bass, midrange, and high-frequency content. The separate tweeter arrangement can help installers position high frequencies more directly toward the listening area when suitable mounting locations are available.\u003c\/p\u003e\u003cp\u003eThe woofer uses a hybrid carbon fiber and polypropylene cone, paired with a Santoprene rubber surround. This construction is intended to combine cone rigidity with controlled movement and durability. An integrated plastic phase plug is also used to support dispersion and time alignment through the woofer's operating range.\u003c\/p\u003e\u003cp\u003eFor the high frequencies, the V68C uses a silk dome tweeter with a neodymium magnet. An integrated crossover provides frequency separation between the woofer and tweeter, while tweeter protection is included to help safeguard the high-frequency driver. The system has a nominal 4-ohm impedance for use with compatible factory-replacement or aftermarket car-audio systems.\u003c\/p\u003e\u003cp\u003eThe V68C is sold as a pair and is suited to front-door or rear-deck upgrades where vehicle space and mounting dimensions allow. Its 2.3-inch mounting depth and 7.09 × 5-inch cutout requirement should be checked against the vehicle before purchase. For amplified installations, match the amplifier's compatible 4-ohm output and power capability to the manufacturer's published speaker ratings.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6×8-Inch Component Design:\u003c\/strong\u003e Separates woofer and tweeter placement for a configurable speaker upgrade.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid Carbon Fiber\/Polypropylene Cone:\u003c\/strong\u003e Combines rigid and lightweight woofer-cone materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSantoprene Rubber Surround:\u003c\/strong\u003e Supports cone excursion and long-term surround durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Silk Dome Tweeter:\u003c\/strong\u003e Handles high-frequency detail with a dynamically balanced design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Crossover Protection:\u003c\/strong\u003e Divides frequencies and includes tweeter protection circuitry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped Steel Basket:\u003c\/strong\u003e Provides a rigid, powder-coated woofer mounting structure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe V68C uses a powder-coated, rigid stamped steel basket, a strontium ferrite woofer magnet, and a neodymium tweeter magnet. Its 6×8-inch woofer has a hybrid carbon fiber\/polypropylene cone, Santoprene rubber surround, and integrated plastic phase plug. The separate silk dome tweeter is designed for use with the included component-system crossover arrangement.\u003c\/p\u003e\u003cp\u003eConfirm that the intended location provides at least 2.3 inches of mounting depth and supports a 7.09 × 5-inch cutout before installation. The overall woofer dimensions are 7.6 × 5.51 inches, with a 2.66-inch overall height, so grille and panel clearance should also be checked. Wire the woofer and tweeter through the system's crossover and use an amplifier or head-unit output compatible with a 4-ohm speaker load.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970394341539,"sku":"CER-V68C","price":165.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/616xZ6r7eZL.jpg?v=1786152491"},{"product_id":"cerwin-vega-cer-v6925c","title":"Cerwin Vega V6925C 6x9\" 3-Way Component Speaker System","description":"\u003cp\u003eThe Cerwin Vega V6925C is a 6x9-inch, three-way component speaker system for upgrading factory vehicle audio with separately placed midrange and tweeter drivers. It combines a 6x9 woofer, 2.5-inch midrange, and 1-inch tweeter in each channel arrangement. This layout is suited to listeners who want more placement flexibility than a conventional coaxial speaker provides.\u003c\/p\u003e\u003cp\u003eThe system is designed for vehicles with suitable 6x9-inch mounting locations and space for the separate midrange and tweeter components. Cerwin Vega lists fitment support for GM, Ford, Chrysler, Jeep, Dodge, and select import vehicles, though vehicle-specific clearance should always be checked before installation. Speaker fitment adapters are included to assist with compatible applications.\u003c\/p\u003e\u003cp\u003eHybrid carbon fiber\/polypropylene cones are used for the woofer and midrange duties, while Santoprene rubber surrounds support driver movement. The result is intended to provide defined bass and midrange output while maintaining durability in an automotive environment. A rigid, powder-coated stamped-steel basket helps provide a stable mounting structure for the 6x9-inch woofer.\u003c\/p\u003e\u003cp\u003eFor high frequencies, the V6925C uses dynamically balanced silk dome tweeters with neodymium magnets. The separate tweeter placement can help installers position high-frequency output closer to the listening area. Integrated passive crossovers divide the signal between the system's drivers and include tweeter protection.\u003c\/p\u003e\u003cp\u003eThis pair is a practical fit for a component-speaker upgrade paired with a compatible factory or aftermarket head unit and amplification. Its 4-ohm nominal impedance supports common car-audio system configurations. Mesh steel grilles are included for installations where the drivers need added physical protection.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Way Component Layout:\u003c\/strong\u003e Combines 6x9-inch woofers, 2.5-inch midranges, and 1-inch tweeters for separated frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid Cone Construction:\u003c\/strong\u003e Carbon fiber\/polypropylene cones support responsive woofer and midrange performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSantoprene Rubber Surrounds:\u003c\/strong\u003e Helps support cone excursion and long-term durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilk Dome Tweeters:\u003c\/strong\u003e Dynamically balanced tweeters are designed for smooth high-frequency detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Passive Crossovers:\u003c\/strong\u003e Direct signal to the appropriate drivers and include tweeter protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Accessories:\u003c\/strong\u003e Mesh steel grilles and speaker fitment adapters are included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe V6925C uses hybrid carbon fiber\/polypropylene cones, Santoprene rubber surrounds, strontium ferrite woofer magnets, neodymium tweeter magnets, and powder-coated stamped-steel baskets. These materials are paired with separate silk dome tweeters and integrated crossovers to form the complete three-way system. The system is sold as a pair.\u003c\/p\u003e\u003cp\u003eConfirm the available 6x9-inch cutout, 3.20-inch mounting depth, and clearance behind the panel before installation. The separate tweeters can be flush or surface mounted; the manual specifies a 1.85-inch flush opening and at least 1 inch of rear clearance for flush mounting. Route each amplifier or speaker-output channel through its passive crossover, observe polarity, and mount crossovers in a protected, well-ventilated location.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970394374307,"sku":"CER-V6925C","price":205.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71ea-Abl-CL.jpg?v=1786152493"},{"product_id":"cerwin-vega-cer-vcu84","title":"Cerwin Vega VCU84 4-Channel Class D Car Amplifier","description":"\u003cp\u003eThe Cerwin Vega VCU84 is a compact four-channel full-range Class D amplifier for upgrading factory or aftermarket vehicle audio systems. It supplies dedicated amplification for front and rear speakers while using a chassis designed for installations where available space is limited. Its selectable input and turn-on options support a variety of source-unit configurations.\u003c\/p\u003e\u003cp\u003eRated for 80 watts RMS per channel at 4 ohms or 150 watts RMS per channel at 2 ohms, the VCU84 is intended for speaker systems that need more output than a head unit can provide. It can also be bridged to operate as two 300-watt RMS channels at 4 ohms. This makes it suitable for a conventional four-speaker setup or a two-channel bridged configuration when system design calls for it.\u003c\/p\u003e\u003cp\u003eThe amplifier uses a full-range Class D topology with a full PWM power supply and an enhanced Power IR digital chipset. Its specified 10 Hz to 35 kHz bandwidth, adjustable high-pass and low-pass filters, and 12 dB-per-octave crossover slopes provide useful control when matching speakers to the system. The crossover can be set from 40 to 400 Hz for either high-pass or low-pass operation.\u003c\/p\u003e\u003cp\u003eFor integration flexibility, the VCU84 accepts both high-level and low-level input signals and offers a selectable 2-channel or 4-channel input configuration. Its Remote Turn-On Configurator supports conventional REM triggering, DC offset sensing, or VOX signal sensing. These options can simplify installation with many factory radios as well as aftermarket head units.\u003c\/p\u003e\u003cp\u003eCerwin Vega builds the VCU84 around a four-layer PCB with SMD construction and a water-resistant conformal coating. A DirectFET power MOSFET output stage, boosted RFI rejection, and protective operating design support dependable use in a vehicle environment. At 8.8 inches long, it can be placed in compact amplifier locations while still providing four amplified channels.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Channel Class D Design:\u003c\/strong\u003e Powers front and rear speakers from one compact amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600-Watt RMS Rating:\u003c\/strong\u003e Delivers 150 watts RMS to each channel at 2 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridgeable Output:\u003c\/strong\u003e Provides 300 watts RMS x 2 at 4 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Crossovers:\u003c\/strong\u003e High-pass and low-pass filters adjust from 40 to 400 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Signal Integration:\u003c\/strong\u003e Supports high-level and low-level inputs with 2CH\/4CH selection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Turn-On Modes:\u003c\/strong\u003e REM, DC offset, and VOX activation options aid installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe VCU84 uses a compact matching-heatsink platform with a full-range Class D IR chipset, DirectFET power MOSFET output stage, and SMD circuitry on a four-layer PCB. Its conformal-coated circuit board is specified as water resistant, adding protection against moisture and environmental exposure. Status LEDs indicate normal operation or a protection fault.\u003c\/p\u003e\u003cp\u003eMount the amplifier on a solid surface with ventilation around the chassis and keep its controls accessible for setup. Use a negative-ground 12-volt electrical system, at least 8-gauge power and ground wiring, and a properly placed battery-side fuse. The amplifier supports loads down to 2 ohms per channel in stereo operation or 4 ohms per bridged channel pair; do not chassis-ground speaker leads.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970394407075,"sku":"CER-VCU84","price":270.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61WhY0G27vL.jpg?v=1786152495"},{"product_id":"cerwin-vega-cer-vmax12d2","title":"Cerwin Vega VMAX12D2 12\" Dual 2-Ohm Car Subwoofer","description":"\u003cp\u003eThe Cerwin Vega VMAX12D2 is a 12-inch passive car subwoofer designed to add substantial low-frequency output to a vehicle audio system. Its dual 2-ohm voice coils give installers wiring flexibility when matching the subwoofer to a compatible external amplifier. It is suited to custom bass upgrades in cars, trucks, and SUVs where an enclosure and dedicated amplification are part of the system plan.\u003c\/p\u003e\u003cp\u003eWith 1,000 watts RMS power handling and 2,000 watts maximum power handling, the VMAX12D2 is built for systems intended to play at elevated output levels. The 14 mm Xmax specification supports significant cone travel for low-frequency reproduction. Its 29.1 Hz free-air resonance and 12-inch cone area make it a practical choice for bass-focused music systems.\u003c\/p\u003e\u003cp\u003eThe VMAX12D2 uses a treated semi-pressed pulped cone and treated foam surround. These components are supported by an oversized spider and a 3-inch black-coated voice coil intended for higher thermal capability. A shorting ring and Klippel DA-optimized motor and suspension symmetry are part of the subwoofer's motor-system design.\u003c\/p\u003e\u003cp\u003eA heavy-duty cast-aluminum basket provides a rigid foundation for the moving assembly, while the elevated motor structure is designed to support cooling. The single-stacked ferrite motor uses a polished bumped backplate, and the subwoofer is fitted with oversized polished black-chrome terminals. Together, these construction details support use in demanding custom car-audio installations.\u003c\/p\u003e\u003cp\u003eThis model can be installed in either a sealed or ported enclosure, allowing the system to be tailored to the listener's preferred bass character. Its dual 2-ohm coils can be wired in series or parallel, so amplifier load compatibility should be planned before installation. The VMAX12D2 is a component subwoofer and requires a separate amplifier, enclosure, wiring, and installation hardware.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,000W RMS Handling:\u003c\/strong\u003e Supports use with a properly matched high-power subwoofer amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 2-Ohm Voice Coils:\u003c\/strong\u003e Provides series or parallel wiring flexibility for system design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-Inch Woofer:\u003c\/strong\u003e Adds low-frequency output to a dedicated car-audio bass system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e14 mm Xmax:\u003c\/strong\u003e Allows substantial linear cone travel for low-frequency operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCast-Aluminum Basket:\u003c\/strong\u003e Provides a rigid structure for the cone and motor assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling-Focused Motor Design:\u003c\/strong\u003e Elevated motor structure and coated voice coil support thermal management.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe VMAX12D2 combines a black treated semi-pressed pulped cone with a treated foam surround, oversized spider, and industrial-strength cast-aluminum frame. Its ferrite magnet motor includes a shorting ring, polished bumped backplate, and elevated motor structure. Oversized polished black-chrome terminals provide the connection points for the dual voice coils.\u003c\/p\u003e\u003cp\u003ePlan for an 11.02-inch mounting cutout, 5.98-inch mounting depth, and 12.79-inch overall diameter before selecting or building an enclosure. Cerwin Vega documentation supports sealed and ported applications; published enclosure guidance lists 1.25 cubic feet sealed or 1.75 cubic feet ported. Wire the two 2-ohm coils only to an amplifier that is stable at the resulting final impedance, and use a properly configured low-pass crossover and enclosure.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970394439843,"sku":"CER-VMAX12D2","price":151.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61iTGTUHGEL.jpg?v=1786152497"},{"product_id":"cerwin-vega-cer-vmax15d2","title":"Cerwin Vega VMAX15D2 15\" Dual 2-Ohm Subwoofer","description":"\u003cp\u003eThe Cerwin Vega VMAX15D2 is a 15-inch dual 2-ohm car subwoofer designed for systems that need substantial low-frequency output. It is rated for 1,500 watts RMS and 3,000 watts maximum power handling. This model is intended for custom car-audio installations using an external amplifier and enclosure.\u003c\/p\u003e\u003cp\u003eIts dual 2-ohm voice-coil design gives installers flexibility when matching the subwoofer to an amplifier. The coils can be configured for 1-ohm or 4-ohm nominal system wiring, provided the amplifier is stable at the selected load. This makes the VMAX15D2 suitable for single-subwoofer builds where amplifier compatibility is an important consideration.\u003c\/p\u003e\u003cp\u003eThe VMAX15D2 uses a treated semi-pressed pulped cone and treated foam surround to support controlled cone movement. With a listed 14 mm Xmax and 28.87 Hz free-air resonance, it is engineered for bass reproduction in appropriately designed sealed or ported enclosures. Its 87.6 dB sensitivity provides a useful reference when planning amplifier power and system output.\u003c\/p\u003e\u003cp\u003eCerwin Vega equips this subwoofer with a heavy-duty aluminum cast frame, oversized spider, elevated motor structure, and black-coated 3-inch voice coil. The motor includes a shorting ring intended to reduce distortion, while the elevated structure supports cooling. Klippel DA optimization is also specified for motor and suspension symmetry.\u003c\/p\u003e\u003cp\u003eFor enclosure-based upgrades, the manufacturer and retailer specifications identify both sealed and ported applications. A 4.0 cubic-foot sealed enclosure or 5.0 cubic-foot ported enclosure is listed as an optimum starting point. Confirm enclosure net volume, amplifier output, wiring load, and available mounting depth before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,500W RMS Power Handling:\u003c\/strong\u003e Supports high-power car-audio systems when paired with an appropriately matched amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 2-Ohm Voice Coils:\u003c\/strong\u003e Provides 1-ohm or 4-ohm nominal wiring flexibility for compatible amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15-Inch Woofer:\u003c\/strong\u003e Offers large cone area for dedicated low-frequency reproduction in a custom enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Inch Black-Coated Voice Coil:\u003c\/strong\u003e Built for higher thermal capability during demanding use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShorting Ring:\u003c\/strong\u003e Helps reduce distortion as part of the motor design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Cast Frame:\u003c\/strong\u003e Provides a rigid foundation for the motor, cone, and suspension assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe VMAX15D2 combines a heavy industrial-strength aluminum cast frame with a black patterned treated semi-pressed pulped cone, treated foam surround, oversized spider, and polished bumped backplate. Oversized polished black chrome terminals support speaker-wire connections. The elevated motor structure is designed to aid cooling, and the single-stacked magnet motor has a 7.89-inch magnet diameter.\u003c\/p\u003e\u003cp\u003ePlan for a 13.98-inch mounting cutout and at least 7.48 inches of mounting depth, plus room for wiring and enclosure clearance. Cerwin Vega specifies a 4.0 cubic-foot optimum sealed box and 5.0 cubic-foot optimum ported box; enclosure displacement should also be considered. Use an external amplifier matched to the subwoofer's RMS rating and to the final voice-coil wiring load.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970394538147,"sku":"CER-VMAX15D2","price":203.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71j9qjX86VL.jpg?v=1786152498"},{"product_id":"cerwin-vega-cer-vmax8d4","title":"Cerwin Vega VMAX8D4 8\" Dual 4-Ohm Car Subwoofer","description":"\u003cp\u003eThe Cerwin Vega VMAX8D4 is an 8-inch dual 4-ohm car audio subwoofer designed for systems that need substantial bass output in a compact driver size. It is rated for 500 watts RMS and 1,000 watts maximum power handling. Its dual voice coil configuration gives installers wiring flexibility for compatible amplifiers.\u003c\/p\u003e\u003cp\u003eThis subwoofer is intended for drivers building or upgrading a dedicated low-frequency section in a car audio system. Its 15 mm Xmax and 43.6 Hz free-air resonance support controlled cone movement and low-frequency output when used in a properly designed enclosure. The 81.9 dB sensitivity specification reflects a design focused on power handling and system integration rather than a high-efficiency free-air approach.\u003c\/p\u003e\u003cp\u003eA treated semi-pressed pulped cone and treated foam surround form the moving assembly, while an oversized spider helps manage suspension control. The aluminum cast frame provides a rigid mounting structure for the driver. Cerwin Vega also uses a black-coated voice coil for increased thermal capability.\u003c\/p\u003e\u003cp\u003eThe VMAX8D4 uses an elevated motor structure cooling design, a polished bumped backplate, and a shorting ring intended to reduce distortion. Its motor and suspension symmetry are optimized using Klippel DA analysis. These details support more consistent performance when the subwoofer is operated within its rated limits.\u003c\/p\u003e\u003cp\u003eFor enclosure-based installations, the VMAX8D4 can be used in sealed or ported designs. Cerwin Vega's published recommendations list a 0.6 cubic foot sealed enclosure or a 1.0 cubic foot ported enclosure. With a 7.36-inch mounting cutout and 4.80-inch mounting depth, it is suited to custom enclosures with adequate internal clearance.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W RMS Power Handling:\u003c\/strong\u003e Supports amplifier matching for sustained bass performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Provides 2-ohm or 8-ohm final wiring options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15 mm Xmax:\u003c\/strong\u003e Allows substantial linear cone travel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCast Aluminum Frame:\u003c\/strong\u003e Adds rigidity to the subwoofer structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElevated Motor Cooling:\u003c\/strong\u003e Promotes airflow around the motor assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShorting Ring:\u003c\/strong\u003e Helps reduce motor-related distortion.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe VMAX8D4 combines a black treated semi-pressed pulped cone, treated foam surround, oversized spider, and heavy-duty aluminum cast frame. Its elevated motor assembly, black-coated voice coil, polished bumped backplate, and oversized polished black chrome-finished terminals are designed for a durable, serviceable car-audio driver layout.\u003c\/p\u003e\u003cp\u003ePlan for a 7.36-inch cutout, 4.80-inch mounting depth, and 8.74-inch overall diameter before building or selecting an enclosure. Wire both 4-ohm voice coils only to an amplifier that is stable at the resulting final impedance, and use a sealed 0.6 cubic foot or ported 1.0 cubic foot net enclosure as the published starting point. Set amplifier gain carefully and use an appropriate low-pass crossover to integrate the subwoofer with full-range speakers.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970394570915,"sku":"CER-VMAX8D4","price":97.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/51JYSkXSr4L.jpg?v=1786152500"},{"product_id":"cerwin-vega-cer-vpas10v2","title":"Cerwin Vega VPAS10V2 10\" Low-Profile Powered Subwoofer","description":"\u003cp\u003eThe Cerwin Vega VPAS10V2 is a compact 10-inch powered subwoofer designed to add low-frequency support without requiring a separate enclosure and external amplifier. Its low-profile format is intended for locations with limited space, including many under-seat or confined mounting areas. It is a practical upgrade for drivers who want more bass presence from a factory or aftermarket audio system.\u003c\/p\u003e\u003cp\u003eThis active subwoofer combines the woofer, enclosure, and amplifier module in one unit. It supports both RCA low-level and high-level speaker input connections, helping it integrate with a variety of source units. That flexibility makes it suitable for systems with dedicated subwoofer outputs as well as many factory radios without RCA pre-outs.\u003c\/p\u003e\u003cp\u003eThe built-in amplifier is rated at 200 watts RMS and 550 watts maximum. An adjustable low-pass filter helps blend the subwoofer with door or dash speakers, while the selectable phase control can help improve bass integration from the listening position. The adjustable VEGA Bass boost provides additional low-frequency emphasis when used carefully.\u003c\/p\u003e\u003cp\u003eA cast-aluminum enclosure serves as the unit's housing and heat-dissipation structure. The VPAS10V2 also uses a PWM MOSFET power supply and thermal-protection circuitry. Soft delayed remote turn-on is included to support controlled startup with compatible vehicle audio systems.\u003c\/p\u003e\u003cp\u003eThe included remote level knob allows the subwoofer output to be adjusted from an accessible driver location. Its high-level input and auto-power-on capability can simplify installation with compatible OEM systems. For aftermarket systems, the RCA input and remote turn-on connection provide a conventional powered-subwoofer setup.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Amplifier:\u003c\/strong\u003e Combines amplification and bass reproduction in one enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200W RMS Output:\u003c\/strong\u003e Provides continuous power for the built-in 10-inch subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRCA And High-Level Inputs:\u003c\/strong\u003e Supports aftermarket and many factory audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Low-Pass Filter:\u003c\/strong\u003e Helps match bass output to the main speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Level Knob:\u003c\/strong\u003e Allows convenient subwoofer-level adjustment from the cabin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCast-Aluminum Enclosure:\u003c\/strong\u003e Provides a compact housing with heat-dissipation capability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe VPAS10V2 uses a low-profile rectangular enclosure constructed from cast aluminum. Its integrated amplifier module, 10-inch subwoofer, and enclosure are packaged together to reduce the number of separate components required for a bass upgrade. The unit measures 13.6 inches long, 9.6 inches wide, and 2.6 inches high.\u003c\/p\u003e\u003cp\u003eMount the subwoofer securely in a location with adequate ventilation and verify clearance before installation. Connect it to the vehicle's 12-volt electrical system with a properly fused power connection and solid chassis ground, then use either RCA or high-level audio inputs as appropriate. Set gain, low-pass filter, bass boost, and phase after installation to blend the bass with the rest of the system.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970394603683,"sku":"CER-VPAS10V2","price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/81UpCPbjI9L_5ea89e80-bc3d-4cfe-9e03-bad1c2d81733.jpg?v=1786152503"},{"product_id":"cerwin-vega-cer-vpas68","title":"Cerwin Vega VPAS68 6 x 8\" Powered Underseat Subwoofer","description":"\u003cp\u003eThe Cerwin Vega VPAS68 is a compact active subwoofer enclosure designed to add low-frequency support to a vehicle audio system without consuming much cargo space. Its integrated mono amplifier and loaded 6 x 8-inch subwoofer combine the major bass components in one enclosure. The slim 2.8-inch height makes it a practical option for many underseat or other space-restricted installations.\u003c\/p\u003e\u003cp\u003eThis model is intended for drivers who want more bass from a factory or aftermarket stereo while keeping the installation focused and compact. It accepts either RCA low-level input or speaker-level input, allowing it to work with a variety of source units. A wired remote level control is included for adjusting subwoofer output from the front of the vehicle.\u003c\/p\u003e\u003cp\u003eThe VPAS68 is rated for 100 watts RMS and 300 watts maximum power at a 4-ohm final impedance. Its frequency response is specified at 20 Hz to 150 Hz, with an adjustable low-pass filter to blend the subwoofer with the vehicle's main speakers. Input gain, bass boost, and phase controls provide useful adjustment during setup.\u003c\/p\u003e\u003cp\u003eIts all-in-one layout uses a built-in Class D monoblock amplifier with a PWM MOSFET power supply and thermal-protection circuit. The amplifier is integrated with a cast aluminum heatsink for heat dissipation. A high-temperature voice coil, polypropylene cone, and rubber surround support everyday mobile-audio use.\u003c\/p\u003e\u003cp\u003eThe VPAS68 can serve as a straightforward bass upgrade for systems that do not need a separate amplifier and large subwoofer enclosure. RCA input is the preferred connection when a head unit or signal processor provides RCA outputs, while high-level inputs support systems without them. It is suited to installations where measured available space and secure mounting are prioritized.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact 6 x 8-Inch Format:\u003c\/strong\u003e Adds bass support in a slim enclosure designed for tight vehicle spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Class D Amplifier:\u003c\/strong\u003e Combines the amplifier and loaded subwoofer in one unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W RMS Power:\u003c\/strong\u003e Provides a measured power rating for a compact powered bass upgrade.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRCA And High-Level Inputs:\u003c\/strong\u003e Connects to aftermarket radios, processors, or factory speaker outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Low-Pass Filter:\u003c\/strong\u003e Sets the upper bass range from 50 Hz to 150 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Remote Level Control:\u003c\/strong\u003e Lets the driver adjust subwoofer level from a mounted control.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe VPAS68 uses a sealed underseat-style enclosure with a black Coated Tough Guard finish. Its integrated amplifier is housed with a cast aluminum heatsink, while the 6 x 8-inch woofer uses a polypropylene cone, rubber surround, ferrite magnet, and high-temperature copper voice coil. Power and protect LEDs provide operating-status indication.\u003c\/p\u003e\u003cp\u003eBefore purchasing, measure the intended mounting area against the enclosure dimensions of 10.2 x 7.6 x 2.8 inches. Use either the RCA low-level inputs or the speaker-level inputs, not both at the same time. Cerwin Vega specifies 8 AWG or heavier power and ground wire, a ground run under 39 inches, and a 16 AWG or heavier remote-turn-on lead when using remote turn-on wiring.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970394636451,"sku":"CER-VPAS68","price":113.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71UzhXmBHcL.jpg?v=1786152504"},{"product_id":"cerwin-vega-cer-vpstx12","title":"Cerwin Vega VPSTX12 12\" Powered Spare Tire Subwoofer","description":"\u003cp\u003eThe Cerwin Vega VPSTX12 is a 12-inch powered subwoofer designed to install in a vehicle's spare-tire well. It adds low-frequency support without requiring a conventional trunk-mounted subwoofer enclosure. Its shallow, round form factor is intended for drivers who want to preserve usable cargo space.\u003c\/p\u003e\u003cp\u003eThis all-in-one system combines a 12-inch subwoofer, sealed enclosure, and integrated amplifier in one assembly. The amplifier is rated at 150 watts RMS and 600 watts maximum, with a 2-ohm final impedance. It is suited to filling in bass response for factory or aftermarket car-audio systems.\u003c\/p\u003e\u003cp\u003eThe VPSTX12 is specified for a 20 Hz to 150 Hz frequency response and includes an adjustable 50 Hz to 150 Hz low-pass filter. A variable bass boost and selectable phase setting help tailor its low-frequency output to the vehicle and system. A fixed 20 Hz subsonic filter is also included.\u003c\/p\u003e\u003cp\u003eLow-level RCA and speaker-level input options allow the subwoofer to connect with different head-unit configurations. When speaker-level input is used, the unit has an automatic turn-on circuit if a switched 12-volt turn-on lead is unavailable. A wired remote bass knob is included for convenient level adjustment from the cabin.\u003c\/p\u003e\u003cp\u003eThe shallow spare-tire application is designed around a 14.2-inch outside diameter and 4.7-inch overall height. It can be mounted in spare tires oriented deep-side down, while some deep-side-up spare tires may need to be flipped over first. The supplied 8 mm and 10 mm mounting bolts support installation in many vehicle spare-tire wells.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpare-Tire-Well Design:\u003c\/strong\u003e Uses the spare-tire area to help retain trunk and cargo space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Amplifier:\u003c\/strong\u003e Combines the amplifier and subwoofer in one compact powered assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150W RMS Output:\u003c\/strong\u003e Provides a continuous-power rating suitable for bass reinforcement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Inputs:\u003c\/strong\u003e Supports RCA low-level and speaker-level source connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Low-Pass Filter:\u003c\/strong\u003e Lets you set the upper bass cutoff from 50 Hz to 150 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Bass Knob:\u003c\/strong\u003e Provides in-cabin adjustment of subwoofer level.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe VPSTX12 uses a shallow sealed spare-tire enclosure with a cast-aluminum exterior and integrated heatsink. Its 12-inch driver uses a polypropylene cone, rubber surround, and ferrite magnet motor structure. The enclosure measures 14.2 inches by 14.2 inches by 4.7 inches, with a 12.6-inch mounting diameter.\u003c\/p\u003e\u003cp\u003eConfirm spare-tire-well clearance, mounting-bolt fitment, and tire orientation before purchase. The unit accepts RCA low-level or speaker-level input, but the manufacturer instructs users not to connect both input types at the same time. A high-quality power kit is required separately; the manual specifies 8 AWG battery power wire and cautions against using CCA wiring kits.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970394669219,"sku":"CER-VPSTX12","price":315.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61DM7tqzxuL.jpg?v=1786152506"},{"product_id":"cerwin-vega-cer-vr10","title":"Cerwin Vega VR10 10\" Powered Underseat Subwoofer","description":"\u003cp\u003eThe Cerwin Vega VR10 is a compact 10-inch active subwoofer enclosure made for adding low-frequency reinforcement without dedicating a large portion of the vehicle to a separate subwoofer box and amplifier. Its slim 12.2 x 9.0 x 3.0-inch enclosure is intended for underseat or other tight-space installations. The integrated amplifier creates a self-contained bass upgrade for compatible factory or aftermarket audio systems.\u003c\/p\u003e\u003cp\u003eThis model is designed for drivers who want fuller bass response while maintaining usable cargo and cabin space. It combines a 10-inch, 2-ohm subwoofer with a built-in passive radiator to extend low-frequency performance from its compact enclosure. The result is a focused bass addition suited to everyday music listening rather than a large, externally amplified enclosure installation.\u003c\/p\u003e\u003cp\u003eThe VR10 is rated for 200 watts RMS at 2 ohms and 450 watts maximum power. Its specified frequency response is 35Hz to 150Hz, with an adjustable low-pass filter covering 75Hz to 150Hz. A 0 to 12dB bass boost and 35Hz subsonic filter provide adjustment options for matching the subwoofer to the vehicle and music preferences.\u003c\/p\u003e\u003cp\u003eFor system integration, the VR10 provides both RCA low-level and high-level signal inputs. This allows it to connect with many aftermarket receivers as well as systems that use speaker-level outputs. Adjustable input sensitivity, delayed soft remote turn-on, and thermal-protection circuitry support practical installation and daily operation.\u003c\/p\u003e\u003cp\u003eA wired remote subwoofer control and remote bass knob are included for convenient level adjustment from the front of the vehicle. The amplifier is integrated into a cast-aluminum heat-sink structure, helping manage heat in the compact design. The VR10 can serve as a straightforward standalone bass upgrade without requiring a separate external subwoofer amplifier.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Active Subwoofer:\u003c\/strong\u003e Combines the subwoofer, enclosure, and amplifier in one compact unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200W RMS Output:\u003c\/strong\u003e Delivers 200 watts RMS at 2 ohms and 100Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In Passive Radiator:\u003c\/strong\u003e Supports extended bass response from the slim enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRCA And High-Level Inputs:\u003c\/strong\u003e Supports connection to many factory and aftermarket systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Low-Pass Filter:\u003c\/strong\u003e Lets you set the bass blend from 75Hz to 150Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Bass Control:\u003c\/strong\u003e Provides convenient adjustment of subwoofer level from the cabin.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe VR10 uses a slim enclosure format measuring 12.2 x 9.0 x 3.0 inches. Its integrated amplifier is housed with a cast-aluminum heat-sink design, while a built-in passive radiator supports the enclosure's low-frequency performance. PWM MOSFET power-supply design and a thermal-protection circuit are specified for the powered system.\u003c\/p\u003e\u003cp\u003eConfirm available clearance before mounting under a seat or in another compact location, including space for wiring and ventilation. Connect the unit using either its RCA low-level inputs or high-level inputs, then use the adjustable input sensitivity, low-pass filter, bass boost, and included remote level control to blend output with the rest of the audio system. Professional installation is recommended when vehicle power, ground, remote-turn-on, or factory-system integration is required.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970394701987,"sku":"CER-VR10","price":225.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/51l3Ko8fHML.jpg?v=1786152508"},{"product_id":"cerwin-vega-cer-vs12","title":"Cerwin Vega VS12 12\" Passive Spare-Tire Subwoofer","description":"\u003cp\u003eThe Cerwin Vega VS12 is a passive spare-tire subwoofer enclosure designed to add low-frequency output while preserving usable cargo space. It installs in the spare-tire well rather than occupying the trunk with a conventional box. This makes it a practical option for drivers who want added bass in vehicles with limited storage room.\u003c\/p\u003e\u003cp\u003eRated for 300 watts RMS and 600 watts maximum, the VS12 is intended to pair with an external amplifier. Its 20 Hz to 500 Hz frequency response supports low-bass reinforcement for music and full-range vehicle audio systems. The passive design lets the installer select an amplifier appropriate for the system’s power and wiring plan.\u003c\/p\u003e\u003cp\u003eThe enclosure is built around an 11.3-inch subwoofer driver within the product’s 12-inch spare-tire-subwoofer format. A treated-paper cone, rubber surround, stamped-steel basket, and ferrite ceramic magnet are specified for the driver. With a listed sensitivity of 90 dB, it is engineered to provide controlled bass output in a compact vehicle installation.\u003c\/p\u003e\u003cp\u003eThe VS12 uses dual 4-ohm voice coils and has a 4-inch voice-coil diameter. This configuration should be matched carefully with the amplifier and final wiring arrangement before installation. Because it is not amplified, it does not provide built-in crossover, gain, or bass-boost controls.\u003c\/p\u003e\u003cp\u003eDesigned for use in the spare-tire area, the VS12 can fit many modern vehicles without removing the spare tire. Its 14.2-inch mounting length and 5.7-inch mounting width should still be checked against the available wheel-well depth and trunk-floor clearance. It is suited to factory-system upgrades and custom systems where retaining a clean, space-conscious installation is important.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpare-Tire Installation:\u003c\/strong\u003e Places bass reinforcement in the spare-tire well to help preserve trunk space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Design:\u003c\/strong\u003e Works with a separately selected external amplifier for system-matched power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W RMS Handling:\u003c\/strong\u003e Supports amplifier matching up to its 300-watt continuous power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Provides wiring flexibility when planned with an amplifier’s supported load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20 Hz–500 Hz Response:\u003c\/strong\u003e Covers the low-frequency range used for subwoofer reinforcement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDie-Cast Enclosure:\u003c\/strong\u003e Uses a solid, non-resonant die-cast enclosure construction.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe VS12 combines a solid non-resonant die-cast enclosure with a treated-paper cone, rubber surround, stamped-steel basket, and ferrite ceramic magnet. Its integrated enclosure is designed specifically for spare-tire-well placement rather than conventional trunk-box mounting. The unit’s compact 14.2-inch by 5.7-inch mounting footprint is intended for vehicles where available cargo space is limited.\u003c\/p\u003e\u003cp\u003eConfirm spare-tire-well dimensions, wheel orientation, center-mount hardware, and trunk-floor clearance before purchase. The manual describes 8 mm and 10 mm mounting bolts, plus a replacement ABS fixing nut for certain Audi\/VW-style spare-tire retention systems. Connect the supplied speaker-wire harness to the enclosure after mounting, then use an appropriately configured external amplifier and follow its wiring and crossover instructions.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970394734755,"sku":"CER-VS12","price":236.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61mPDdBzEOL.jpg?v=1786152510"},{"product_id":"cerwin-vega-cer-xed8001d","title":"Cerwin Vega XED8001D 1100W Class-D Mono Amplifier","description":"\u003cp\u003eThe Cerwin Vega XED8001D is a compact mono Class-D amplifier designed to add dedicated subwoofer power to a car audio system. It delivers 450 watts RMS into 4 ohms or 800 watts RMS into 2 ohms from a single channel. This makes it a practical choice for systems built around one subwoofer or a compatible two-subwoofer load.\u003c\/p\u003e\u003cp\u003eThis amplifier is intended for listeners who want stronger low-frequency output without adding a large multi-channel amplifier. Its mono configuration concentrates its output on bass reproduction, while the variable low-pass and subsonic filters help tailor the amplifier to the installed subwoofer system. A wired remote level control provides an accessible way to adjust bass level from the front of the vehicle.\u003c\/p\u003e\u003cp\u003eClass-D topology and a full PWM power supply support efficient operation in a compact chassis. The XED8001D is rated for a 10.0 to 16.0 VDC supply range and has an idle-current specification of 0.7A. Its 2-ohm output impedance rating allows it to support properly wired 2-ohm subwoofer loads.\u003c\/p\u003e\u003cp\u003eInput flexibility helps the amplifier work with a range of source units. It provides RCA input connections as well as a high-level input, with separate low- and high-level input sensitivity ranges. Input gain adjustment, a crossover selection switch, and Vega Bass Boost give installers useful controls for integrating the amp into an existing system.\u003c\/p\u003e\u003cp\u003eThe XED8001D fits naturally into a staged audio upgrade where a head unit and full-range speakers are already in place and dedicated bass power is needed. Its 8.7-inch length can simplify placement in installations with limited mounting room. Use it with a subwoofer configuration that presents no lower than its rated 2-ohm load.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e800W RMS at 2 Ohms:\u003c\/strong\u003e Supplies substantial single-channel power for a correctly matched subwoofer load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass-D Topology:\u003c\/strong\u003e Provides efficient mono amplification in a compact format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Low-Pass Filter:\u003c\/strong\u003e Adjusts the upper bass cutoff from 35Hz to 250Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Subsonic Filter:\u003c\/strong\u003e Lets you set low-frequency filtering from 10Hz to 50Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh- and Low-Level Inputs:\u003c\/strong\u003e Supports RCA-equipped and speaker-level source connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Level Remote:\u003c\/strong\u003e Allows convenient adjustment of bass level from the cabin.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe XED8001D uses a compact black chassis measuring 8.7 x 4.7 x 1.8 inches. Its layout includes power input connections, speaker output terminals, RCA input connections, high-level input, input gain adjustment, crossover controls, a remote-level connection, and a status LED. Two 35A ATC fuses are specified for the amplifier.\u003c\/p\u003e\u003cp\u003eMount the amplifier securely on a solid vehicle or amplifier-rack surface, leaving room for wiring and access to the adjustment controls. Match the subwoofer wiring to a 2-ohm minimum load, then set gain and filtering to suit the source unit and enclosure. The manufacturer documentation identifies 4 AWG as the maximum input wire gauge; use appropriately fused power wiring and follow the installation manual for grounding and connection guidance.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970394767523,"sku":"CER-XED8001D","price":152.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/5157L_HCjdL.jpg?v=1786152512"},{"product_id":"cerwin-vega-cer-xed8005d","title":"Cerwin Vega XED8005D 5-Channel Class-D Car Amplifier","description":"\u003cp\u003eThe Cerwin Vega XED8005D is a compact five-channel Class-D car amplifier made to power front and rear speakers along with a dedicated subwoofer from one chassis. It provides an organized upgrade path for vehicles that need more output and control than a factory radio can deliver. Its channel layout suits systems that use four full-range speakers and one subwoofer.\u003c\/p\u003e\u003cp\u003eAt 4 ohms, the XED8005D supplies 65 watts RMS to each of four speaker channels and 200 watts RMS to the subwoofer channel. At 2 ohms, output increases to 90 watts RMS per speaker channel and 300 watts RMS on the subwoofer channel. This makes it appropriate for matching speakers and a subwoofer within the amplifier's rated impedance limits.\u003c\/p\u003e\u003cp\u003eThe full-range channels use a 10 Hz to 30 kHz bandwidth, while the subwoofer channel is specified from 10 Hz to 250 Hz. Variable high-pass and low-pass filters let an installer divide bass and full-range duties between the connected speakers. A selectable flat setting for the front and rear channels can also pass the full frequency range when an external crossover or processor is being used.\u003c\/p\u003e\u003cp\u003eClass-D topology and a full PWM power supply support efficient operation in a small enclosure. The aluminum chassis is designed to help dissipate heat while keeping the amplifier's footprint manageable. Power and protection status LEDs provide a straightforward visual indication of operating condition.\u003c\/p\u003e\u003cp\u003eThe XED8005D can accept low-level RCA signals and includes high-level input capability for systems using a factory radio without RCA pre-outs. Its subwoofer section includes adjustable Vega Bass Boost from 0 to 12 dB at 45 Hz for careful low-frequency tailoring. A remote level-control connection supports convenient adjustment of the preset subwoofer level from the driver's seat.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive-Channel Layout:\u003c\/strong\u003e Powers four speaker channels plus one dedicated subwoofer channel from one amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass-D Topology:\u003c\/strong\u003e Delivers efficient amplification in a compact car-audio format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated RMS Output:\u003c\/strong\u003e Provides 65W x 4 plus 200W x 1 at 4 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Crossovers:\u003c\/strong\u003e High-pass and low-pass filters adjust from 35 Hz to 250 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVega Bass Boost:\u003c\/strong\u003e Adds adjustable 0 to 12 dB bass emphasis centered at 45 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory-Radio Compatibility:\u003c\/strong\u003e High-level input capability supports integration where RCA outputs are unavailable.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe XED8005D uses a lightweight aluminum chassis measuring 10.3 by 4.7 by 1.8 inches. Its compact form helps with placement in vehicles where amplifier mounting space is limited, while the chassis also serves as a heat-dissipating structure. The amplifier includes LED power and protection indicators for basic status monitoring.\u003c\/p\u003e\u003cp\u003eMount the amplifier on a solid, well-ventilated surface with its controls accessible for tuning, and avoid covering it with carpet or wiring. Use a negative-ground 12V vehicle electrical system, secure power and ground connections, and fuse the positive power cable close to the battery. Configure the front and rear channels for flat or high-pass operation as needed, then set the subwoofer low-pass filter, gain, and bass boost to suit the connected speakers and enclosure.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970394800291,"sku":"CER-XED8005D","price":224.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61yLYN6Q6LL.jpg?v=1786152514"},{"product_id":"cerwin-vega-cer-vcu86v2","title":"Cerwin-Vega CER-VCU86V2 6-Channel Class-D Amplifier","description":"\u003cp\u003eThe Cerwin-Vega VCU86 is a six-channel full-range Class-D amplifier designed to add dedicated power to a multi-speaker mobile audio system. It provides six amplified channels for front, rear, and additional speaker zones from one compact chassis. It is suited to car, marine, motorcycle, and powersports-style installations where space and system flexibility matter.\u003c\/p\u003e\u003cp\u003eAt 4 ohms, the VCU86 is rated at 100 watts RMS per channel across all six channels. It can also deliver 150 watts RMS per channel at 2 ohms, or bridge paired channels for 300 watts RMS across three 4-ohm bridged channels. This configuration supports conventional multi-speaker systems as well as builds that need higher power from bridged channel pairs.\u003c\/p\u003e\u003cp\u003eThe amplifier uses a full-range Class-D design with an IR chipset and DirectFET power MOSFET output stage. Its published bandwidth is 10Hz to 35kHz at -3dB, while the specified THD figure is 0.05% at 1kHz into 4 ohms. These specifications support use with full-range speakers and properly matched passive or active system sections.\u003c\/p\u003e\u003cp\u003eFor integration flexibility, the VCU86 accepts both high-level and low-level input signals with input sensitivity rated from 200mV to 10V. Its REM\/DC\/VOX turn-on configurator offers multiple activation approaches for different source-unit setups. Boosted RFI rejection is also specified to help reduce installation-related interference.\u003c\/p\u003e\u003cp\u003eThe VCU86 is built around a compact 4-layer PCB with SMD construction and a conformal coating. Cerwin-Vega specifies a water-resistant design, making it a practical option where moisture exposure is a consideration. Built-in crossover controls provide tuning options when matching speakers, subwoofers, and amplifier channels within a system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix-Channel Output:\u003c\/strong\u003e Powers up to six speaker channels from one amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible RMS Ratings:\u003c\/strong\u003e Delivers 100W x 6 at 4 ohms or 150W x 6 at 2 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridgeable Channels:\u003c\/strong\u003e Pairs channels for 300W x 3 at 4 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass-D Architecture:\u003c\/strong\u003e Uses full-range digital topology in a compact amplifier format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHi\/Lo-Level Inputs:\u003c\/strong\u003e Supports high-level and low-level inputs up to 12V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Crossovers:\u003c\/strong\u003e Includes high-pass, low-pass, and subsonic filter controls.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe VCU86 measures 11.24 inches long, 4.02 inches wide, and 1.4 inches high. Its construction includes SMD technology on a 4-layer PCB, a conformal PCB coating, and a water-resistant design. The DirectFET power MOSFET output stage and full PWM power supply are part of its published hardware design.\u003c\/p\u003e\u003cp\u003eInstall the amplifier in a secure location with appropriate ventilation and protection from direct physical damage. Match speakers to the stated 2-ohm or 4-ohm channel ratings, and use only 4-ohm loads when bridging channel pairs. The high- and low-level inputs, REM\/DC\/VOX turn-on options, and crossover controls should be configured for the connected source unit and speaker system.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970394833059,"sku":"CER-VCU86V2","price":406.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61FNHQZSuwL.jpg?v=1786152515"},{"product_id":"cerwin-vega-cer-vmax10d4","title":"Cerwin-Vega CER-VMAX10D4 10\" DVC Car Subwoofer","description":"\u003cp\u003eThe Cerwin-Vega VMAX10D4 is a 10-inch dual-voice-coil car subwoofer for adding dedicated low-frequency output to a vehicle audio system. It is a passive driver, so it is intended for use with a separate compatible amplifier and subwoofer enclosure. Its dual 4-ohm coils provide wiring flexibility for system planning.\u003c\/p\u003e\u003cp\u003eWith an 800-watt RMS power rating and 1,600-watt maximum rating, this subwoofer is designed for systems that need substantial bass capacity from a 10-inch driver. The 15 mm Xmax specification supports meaningful cone travel for low-frequency reproduction. Its 84.4 dB sensitivity and 36.9 Hz free-air resonance are useful reference points when matching the driver and enclosure to the desired response.\u003c\/p\u003e\u003cp\u003eThe VMAX10D4 uses a treated semi-pressed pulped-paper cone, treated-foam surround, and oversized spider. These components support controlled movement while the motor system is engineered for high-excursion operation. A shorting ring and Klippel DA optimized motor and suspension symmetry are included to support lower distortion and consistent operation.\u003c\/p\u003e\u003cp\u003eIts cast-aluminum basket provides a rigid foundation for the driver assembly, while the elevated motor structure is designed to aid cooling. The black-coated voice coil is intended to improve thermal capability during higher-power use. Oversized polished black-chrome terminals provide connection points for the two voice coils.\u003c\/p\u003e\u003cp\u003eThis subwoofer can be installed in either a sealed or ported enclosure according to the manufacturer’s enclosure guidance. A sealed design is suited to a compact, controlled-bass system, while the recommended ported design provides a larger enclosure option with a slot port. It is a practical choice for a custom car-audio bass upgrade when amplifier impedance, enclosure volume, and vehicle space are planned together.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e800W RMS Handling:\u003c\/strong\u003e Supports higher-output bass systems when paired with an appropriately rated amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Allows 2-ohm parallel or 8-ohm series wiring configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15 mm Xmax:\u003c\/strong\u003e Provides capacity for extended cone movement at low frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCast-Aluminum Basket:\u003c\/strong\u003e Adds a rigid platform for the moving assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShorting Ring:\u003c\/strong\u003e Helps reduce distortion from the motor system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElevated Motor Cooling:\u003c\/strong\u003e Supports heat management during demanding operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe VMAX10D4 combines a treated paper cone, treated-foam surround, oversized spider, and heavy-duty cast-aluminum frame. Its ferrite motor uses a polished bumped backplate, black-coated voice coil, and elevated cooling-oriented structure. The 10-inch driver has an 11.06-inch overall diameter and a 6.89-inch magnet diameter.\u003c\/p\u003e\u003cp\u003eConfirm a 9.47-inch mounting cutout and at least 5.39 inches of mounting depth before installation. The manufacturer recommends a 1.0 cu. ft. net sealed enclosure or a 1.25 cu. ft. net ported enclosure, both calculated with 3\/4-inch MDF. Match the amplifier to the final 2-ohm or 8-ohm coil wiring load, and use a subsonic filter of at least 30 Hz with the recommended vented enclosure.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970394865827,"sku":"CER-VMAX10D4","price":129.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/618l0D8BB2L.jpg?v=1786152517"},{"product_id":"cerwin-vega-cer-vpas12","title":"Cerwin-Vega CER-VPAS12 12\" Powered Subwoofer","description":"\u003cp\u003eThe Cerwin-Vega CER-VPAS12 is a compact 12-inch powered subwoofer designed to add low-frequency output to a vehicle audio system without requiring a separate external amplifier enclosure. Its integrated amplifier, subwoofer, and passive radiator are housed together for a simplified bass upgrade. It is suited to vehicles where available installation space is limited.\u003c\/p\u003e\u003cp\u003eThis all-in-one design can be used with factory radios as well as aftermarket head units. It accepts low-level RCA signals when a source unit provides preamp outputs, while high-level speaker inputs support systems without RCA outputs. The high-level input can also use signal-sensing auto turn-on.\u003c\/p\u003e\u003cp\u003eThe CER-VPAS12 is rated at 250 watts RMS and 600 watts maximum power. Its 30 Hz to 150 Hz frequency-response range is intended to reinforce the bass region of a full vehicle audio system. An adjustable low-pass filter helps blend the subwoofer with the vehicle's main speakers.\u003c\/p\u003e\u003cp\u003eA passive radiator works with the 12-inch, 4-ohm subwoofer in the compact enclosure. The enclosure is constructed from cast aluminum, which also serves as a heat-dissipating structure for the integrated amplifier. Adjustable bass boost, phase selection, and input gain give the installer useful setup controls.\u003c\/p\u003e\u003cp\u003eThe low-profile enclosure measures 13.5 inches wide, 11.25 inches long, and 3 inches high. This size supports placement under a seat when clearance permits, as well as trunk or other securely mounted locations. A wired bass-level control is included for convenient level adjustment after installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Amplifier:\u003c\/strong\u003e Combines amplification and bass reproduction in one enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-Inch Subwoofer:\u003c\/strong\u003e Adds bass output in a compact vehicle-audio format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Radiator:\u003c\/strong\u003e Supports low-frequency performance without a large enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRCA And High-Level Inputs:\u003c\/strong\u003e Connects with aftermarket or factory audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Low-Pass Filter:\u003c\/strong\u003e Helps match bass output to the main speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Bass Knob:\u003c\/strong\u003e Provides convenient remote adjustment of subwoofer level.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CER-VPAS12 uses a slim cast-aluminum enclosure with an integrated amplifier and 12-inch, 4-ohm subwoofer. Its controls include gain, bass boost, low-pass filtering, phase selection, and status indicators for power and protection. The enclosure's 3-inch height is intended for installations where vertical clearance is restricted.\u003c\/p\u003e\u003cp\u003eUse RCA low-level inputs when the head unit has RCA outputs; use the supplied high-level input cable and wire harness only when the head unit lacks RCA outputs. Do not connect high-level and low-level inputs at the same time. Cerwin-Vega recommends 8-gauge power and ground wiring, a ground connection shorter than 18 inches, and secure mounting with the supplied brackets and hardware.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970394898595,"sku":"CER-VPAS12","price":314.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71b2Za9rVnL.jpg?v=1786152519"},{"product_id":"cerwin-vega-cer-xed12sv","title":"Cerwin-Vega CER-XED12SV 12\" Loaded Vented Subwoofer","description":"\u003cp\u003eThe Cerwin-Vega XE12SV is a loaded 12-inch car subwoofer enclosure designed to add low-frequency output to an existing vehicle audio system. It combines one XED Series subwoofer with a prebuilt vented enclosure, reducing the need to select and build a separate subwoofer box. The 2-ohm final impedance is intended for use with a compatible external mono or subwoofer amplifier.\u003c\/p\u003e\u003cp\u003eThis enclosure is suited to listeners who want a compact, ready-to-install bass upgrade for a car or SUV. Its single 12-inch driver provides a practical alternative to assembling individual subwoofer, enclosure, and terminal components. The angled hatchback-style cabinet is designed for vehicle cargo-area placement.\u003c\/p\u003e\u003cp\u003eThe XE12SV is rated for 225 watts RMS and 800 watts maximum power handling. Its vented enclosure design supports strong bass output with the appropriate amplifier setup. Cerwin-Vega specifies a 20 Hz to 500 Hz frequency response range for the loaded system.\u003c\/p\u003e\u003cp\u003eThe subwoofer uses a polypropylene cone, treated-foam surround, stamped-steel basket, and ferrite magnet motor structure. A 2-inch voice coil and single-coil configuration support the enclosure's 2-ohm nominal impedance. The enclosure is constructed from 3\/4-inch MDF and finished in black carpet.\u003c\/p\u003e\u003cp\u003eFor a complete system, pair the XE12SV with an amplifier that is stable at 2 ohms and matched appropriately to its RMS power rating. The manufacturer installation guide recommends an amplifier in the 250 to 500 watt RMS range and at least 16-gauge speaker wire between the amplifier and enclosure. Secure the enclosure in the vehicle cargo area to help prevent movement during operation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoaded 12-Inch Enclosure:\u003c\/strong\u003e Includes one XED Series 12-inch subwoofer in a prebuilt cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e225W RMS Handling:\u003c\/strong\u003e Supports amplifier matching based on continuous power capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Final Impedance:\u003c\/strong\u003e Designed for compatible 2-ohm-stable subwoofer amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented Cabinet:\u003c\/strong\u003e Uses a ported enclosure layout for bass-focused vehicle audio.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Provides a durable cone material for everyday car-audio use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngled Hatchback Design:\u003c\/strong\u003e Helps the enclosure fit common car and SUV cargo areas.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe XE12SV uses a 3\/4-inch MDF enclosure with a black carpet finish. Its driver combines a polypropylene cone, treated-foam surround, ferrite magnet, and stamped-steel basket. The cabinet contains a single subwoofer and uses spring-post speaker terminals.\u003c\/p\u003e\u003cp\u003eInstall the enclosure in a secure cargo-area location with sufficient clearance for the cabinet dimensions of 15.7 by 12.3 by 14.3 inches. Connect amplifier output to the enclosure terminals with correct polarity; the manufacturer specifies 16-gauge wire minimum and prefers 14-gauge wire. Use an external amplifier compatible with the enclosure's 2-ohm nominal impedance.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970394931363,"sku":"CER-XED12SV","price":126.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71x9ZBWch6L.jpg?v=1786152521"},{"product_id":"cerwin-vega-cer-cvm0","title":"Cerwin-Vega CVM0 Digital Bass Enhancer","description":"\u003cp\u003eThe Cerwin-Vega CVM0 is a car-audio bass processor designed to restore and shape low-frequency content before it reaches downstream audio components. It is intended for systems that need more control over sub-bass impact than a head unit or amplifier gain control alone can provide. The CVM0 connects at line level and is designed to work with compatible crossovers, equalizers, and amplifiers.\u003c\/p\u003e\u003cp\u003eIts Bass Driver circuit recreates and injects low-frequency information into the signal path, while the bass equalization circuit contours the processed bass response. Sweep and Width controls let the installer select the bass center frequency and the range of frequencies affected. This makes the processor suited to tuning bass response around the vehicle, speaker placement, and enclosure characteristics.\u003c\/p\u003e\u003cp\u003eThe CVM0 uses balanced-input circuitry to help minimize induced noise and accepts signals up to 15V RMS. Its RCA outputs feed the next component in the signal chain, such as an equalizer, crossover, or amplifier. Cerwin-Vega specifies installing the CVM0 before a crossover in the system layout.\u003c\/p\u003e\u003cp\u003eA dash-mount remote control is included for adjusting bass level from the driver's seat. The remote has an LED that brightens as bass is increased, while three LEDs on the processor indicate bass-maximizer activity. These controls support practical adjustment for different recordings without needing to access the main chassis.\u003c\/p\u003e\u003cp\u003eThe built-in PFM subsonic filter offers selectable 35Hz, 50Hz, and 80Hz settings for tailoring very-low-frequency filtering. Bass-output jumpers provide four output-setting options, allowing the processor to be configured around the rest of the system. It is a focused upgrade for car-audio systems using RCA-level source and amplifier connections.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBass Driver Circuit:\u003c\/strong\u003e Restores and injects low-frequency information into the audio signal path.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBass Equalization:\u003c\/strong\u003e Shapes processed bass to better suit the installed speaker system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSweep And Width Controls:\u003c\/strong\u003e Adjust the bass center frequency and affected frequency range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePFM Subsonic Filter:\u003c\/strong\u003e Selectable 35Hz, 50Hz, or 80Hz filtering supports system tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDash-Mount Remote:\u003c\/strong\u003e Lets the driver adjust bass level from the listening position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced RCA Inputs:\u003c\/strong\u003e Help minimize induced noise while accepting high-level preamp signals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVM0 is a compact processor chassis with front-panel Sweep and Width controls, bass-maximizer LEDs, a power-on LED, RCA signal connections, and a three-terminal power connector. Its rear-panel configuration includes input-grounding, ground-isolation, and bass-output-control jumpers. The included wired dash remote provides a separate bass-level knob and LED indication.\u003c\/p\u003e\u003cp\u003eInstall the CVM0 in an accessible, secure location and connect it using RCA-level signal cables. Connect its RCA outputs to the next component after the processor; Cerwin-Vega specifies placing the unit before a crossover. Wire B+ to a 12V source, connect the remote lead to a 12V DC turn-on lead, ground the unit to the vehicle chassis, and use the recommended 1A fuse rating.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970394964131,"sku":"CER-CVM0","price":43.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/519zpD3-VuL.jpg?v=1786152523"},{"product_id":"cerwin-vega-cer-cvm1","title":"Cerwin-Vega CVM1 Digital Bass Enhancer","description":"\u003cp\u003eThe Cerwin-Vega CVM1 is a digital bass enhancement processor for car audio systems using RCA-level signal connections. It is designed to restore and contour low-frequency information before the signal reaches downstream audio components. This makes it a useful addition when a system needs more adjustable bass response than a head unit or amplifier alone provides.\u003c\/p\u003e\u003cp\u003eThe CVM1 is intended for enthusiasts building or refining a subwoofer-equipped system with compatible RCA signal paths. Its balanced input circuit accepts signals up to 15V RMS, helping it work with higher-voltage aftermarket preamp outputs. The processor is installed inline ahead of a crossover, equalizer, or amplifier.\u003c\/p\u003e\u003cp\u003eIts bass controls allow the user to choose the center frequency most affected by the restoration circuit, then adjust the width of the affected frequency range. The Sweep control operates from 27Hz to 63Hz, allowing tuning around the vehicle, enclosure, and subwoofer system. A separate bass output control provides selectable output settings to help match the processor to connected equipment.\u003c\/p\u003e\u003cp\u003eThe CVM1 includes a dash-mount remote control for convenient adjustment from the driver seat. The remote combines bass-level adjustment with variable PFM subsonic filtering from 35Hz to 80Hz. This gives the user a practical way to reduce unwanted ultra-low-frequency content while tailoring bass level for different recordings.\u003c\/p\u003e\u003cp\u003eThree Bass Maximizer LEDs provide visual indication when the bass-maximization circuit is active, while a separate power LED confirms operation. With RCA input and output connections, the CVM1 fits into systems using an aftermarket source unit, equalizer, crossover, or amplifier with compatible line-level connections. Careful setup is important, since bass restoration can increase low-frequency demand on amplifiers, subwoofers, and enclosures.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital Bass Enhancement:\u003c\/strong\u003e Restores and shapes low-frequency information in the signal path.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15V RMS Input Capability:\u003c\/strong\u003e Accommodates higher-voltage RCA preamp signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Sweep Control:\u003c\/strong\u003e Selects a bass center frequency from 27Hz to 63Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth Control:\u003c\/strong\u003e Adjusts the range affected around the selected frequency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDash-Mount Remote:\u003c\/strong\u003e Provides driver-seat bass and subsonic-filter adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePFM Subsonic Filter:\u003c\/strong\u003e Variable 35Hz to 80Hz filtering helps manage ultra-low frequencies.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVM1 uses a compact processor chassis with panel-mounted Sweep and Wide controls, RCA input and output connections, a remote-control port, and a screw-terminal power connector. Its design also includes three Bass Maximizer indicator LEDs, a power-on LED, and internal jumpers for input grounding, ground isolation, and bass-output selection. Cerwin-Vega does not publish a chassis material specification for this model.\u003c\/p\u003e\u003cp\u003eInstall the CVM1 in an accessible, securely mounted location and connect it inline before a crossover, equalizer, or amplifier. Connect B+ to a 12V power source, remote turn-on to a 12V DC activation lead, and ground to the vehicle chassis. Start with the factory bass-output jumper setting, then set output level and subsonic filtering conservatively to suit the amplifier, subwoofer size, enclosure, and listening level.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970394996899,"sku":"CER-CVM1","price":60.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/51zYHvQvr5L.jpg?v=1786152525"},{"product_id":"cerwin-vega-cer-cvm2","title":"Cerwin-Vega CVM2 Digital Bass Restoration Processor","description":"\u003cp\u003eThe Cerwin-Vega CVM2 is a mobile bass restoration processor designed for car audio systems with RCA preamp signal paths. It processes low-frequency content before the signal reaches the next component in the system, such as an amplifier, equalizer, or crossover. This makes it a focused upgrade for listeners who want more control over bass response than a head unit alone provides.\u003c\/p\u003e\u003cp\u003eThe CVM2 uses a Bass Driver circuit to restore and reinforce low-frequency information in the audio signal. Its bass equalization circuit is intended to contour the processed bass response for the connected speaker system. The result is a tunable low-frequency presentation that can be adjusted for the vehicle, music source, subwoofer system, and listening preference.\u003c\/p\u003e\u003cp\u003eThree front-panel controls provide access to Master Volume, Wide, and Sweep adjustments. Sweep selects the center frequency affected by bass restoration from 27 to 63 Hz, while Wide changes the range around that selected frequency. This allows the processor to be tuned around the bass character of a specific vehicle and subwoofer installation.\u003c\/p\u003e\u003cp\u003eA wired, mountable remote location controller lets the driver adjust bass level from the listening position. The remote includes an LED indicator that brightens as bass level is increased and dims as it is reduced. It also provides adjustment of the subsonic control, helping tailor low-frequency filtering without accessing the main processor.\u003c\/p\u003e\u003cp\u003eThe CVM2 fits into an RCA-based signal chain ahead of a crossover, equalizer, or amplifier. It supports two-channel preamp inputs and outputs, along with high-level signal capability for compatible source units and amplifiers. Its selectable bass-output settings also provide recommendations based on amplifier input-voltage capability and minimum speaker size.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital Bass Restoration:\u003c\/strong\u003e Rebuilds and reinforces low-frequency information in the signal path.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Channel RCA Signal Path:\u003c\/strong\u003e Provides stereo preamp inputs and outputs for system integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePara-Bass Controls:\u003c\/strong\u003e Sweep and Wide controls tailor bass center frequency and range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Dash Remote:\u003c\/strong\u003e Places bass-level adjustment within reach of the driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubsonic Filter Control:\u003c\/strong\u003e Adjusts low-frequency filtering to suit the system setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced RCA Inputs:\u003c\/strong\u003e Helps minimize induced noise in the input signal path.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVM2 uses a compact processor enclosure with front-panel rotary controls, RCA signal connections, a remote-control socket, and dedicated power terminals. A power-on LED provides operating-status indication, while the separate remote controller combines bass-level and subsonic adjustments. Cerwin-Vega does not publish enclosure-material details.\u003c\/p\u003e\u003cp\u003eInstall the CVM2 in-line between an RCA-equipped source unit and the next signal-processing component or amplifier, ahead of a crossover when one is used. Power connections require 12V B+, chassis ground, and a switched 12V remote turn-on lead. Start with the factory bass-output setting, then set the Sweep, Wide, bass level, and subsonic control conservatively while matching the processor to the amplifier and speakers.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970395029667,"sku":"CER-CVM2","price":71.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/519Za3BLAXL.jpg?v=1786152527"},{"product_id":"cerwin-vega-cer-cvm3","title":"Cerwin-Vega CVM3 2-Channel Bass Maximizer Processor","description":"\u003cp\u003eThe Cerwin-Vega CVM3 is a 2-channel bass maximizer processor designed to shape and restore low-frequency information before it reaches the next component in a car audio system. It is intended for systems that need more control over bass response than a source unit or amplifier adjustment alone can provide. RCA inputs and outputs allow it to be installed in the signal path ahead of an amplifier, equalizer, or crossover.\u003c\/p\u003e\u003cp\u003eIts bass driver circuit recreates low-frequency content and adds it back into the signal path, while the bass equalization circuit contours the restored bass for the connected speaker system. A Sweep control selects the center frequency affected by the restoration circuit, and a Wide control adjusts the range of frequencies it influences. This makes the CVM3 suitable for tailoring bass character to the vehicle, music, subwoofer system, and enclosure.\u003c\/p\u003e\u003cp\u003eThe CVM3 supports signals up to 15V RMS at its balanced differential RCA inputs and provides up to 13.2V peak output. Its high-headroom PWM power supply, 133 dB signal-to-noise ratio, and 0.0025% THD specification support clean signal handling within a properly configured system. The processor is designed for use with a full-range source signal.\u003c\/p\u003e\u003cp\u003eA wired dash-mount remote controller brings bass adjustment closer to the driver. Its LED indicator becomes brighter as bass effect is increased and dimmer as it is reduced. The processor also includes master volume, sub volume, bass output, Sweep, Wide, and adjustable subsonic controls for system-specific setup.\u003c\/p\u003e\u003cp\u003eFor subwoofer upgrades, the CVM3 fits between an RCA-equipped source or signal chain and the downstream crossover, equalizer, or amplifier. The manual specifies placing it before any crossover because it needs a full-range signal to operate properly. It can be a useful addition when building a dedicated bass section around a compatible amplifier and subwoofer system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Channel RCA Signal Path:\u003c\/strong\u003e Uses RCA preamp inputs and outputs for in-line system integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBass Driver Circuit:\u003c\/strong\u003e Recreates and injects low-frequency information into the audio signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSweep And Wide Controls:\u003c\/strong\u003e Adjust bass restoration center frequency and affected frequency range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Subsonic Control:\u003c\/strong\u003e Sets the subsonic frequency from 35 Hz to 120 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDash-Mount Remote:\u003c\/strong\u003e Provides in-car bass adjustment with an LED level indicator.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced Differential Inputs:\u003c\/strong\u003e Help minimize induced noise in the RCA signal path.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVM3 uses a compact processor layout with RCA signal connections, a power connector, onboard bass controls, and a separate wired dash-mount remote controller. Cerwin-Vega does not publish a chassis-material specification. Its design includes balanced differential RCA inputs, a high-headroom PWM power supply, and selectable internal output and isolation settings for qualified installers.\u003c\/p\u003e\u003cp\u003eConnect the RCA outputs to the next component after the processor, such as an amplifier, equalizer, or crossover, and feed the CVM3 a full-range signal. Power wiring requires 12V B+, chassis ground, and a 12V remote turn-on lead; the manual advises placing the processor before any device with a crossover. Set the processor conservatively at first, then match its output setting and controls to the amplifier input voltage and connected subwoofer system.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970395127971,"sku":"CER-CVM3","price":81.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/81di5WCb7uL_d78b2437-c0dc-426d-b4c9-220df168289e.jpg?v=1786152529"},{"product_id":"cerwin-vega-cer-cvp10s4","title":"Cerwin-Vega CVP10S4 10\" 4-Ohm Subwoofer","description":"\u003cp\u003eThe Cerwin-Vega CVP10S4 is a 10-inch passive car subwoofer designed to add dedicated low-frequency output to an aftermarket vehicle audio system. Its single 4-ohm voice coil provides a straightforward load for a compatible amplifier. It is intended for drivers who want to build or refresh a bass system with a separate subwoofer and enclosure.\u003c\/p\u003e\u003cp\u003eWith 150 watts RMS and 450 watts maximum power handling, the CVP10S4 is suited to amplifier matching based on continuous power rather than peak ratings. Its 87.1 dB sensitivity and 8 mm one-way Xmax support responsive bass performance within its operating limits. The 10-inch format can be a practical option where enclosure space is more limited than a larger subwoofer installation.\u003c\/p\u003e\u003cp\u003eA polypropylene cone and treated foam surround form the moving assembly. The surround uses a dual-stitched connection and ribbed design intended to support cone movement. A structure-reinforcing dust cap is also used as part of the driver assembly.\u003c\/p\u003e\u003cp\u003eThe CVP10S4 uses a ferrite magnet motor, stamped-steel basket, and perimeter-vented voice-coil design. Its bumped backplate is engineered to allow increased excursion, while the venting supports heat dissipation. Large-gauge spring terminals simplify connection of speaker wire during installation.\u003c\/p\u003e\u003cp\u003eThis subwoofer can be used in sealed or ported enclosures, allowing the system design to be tailored to available space and listening goals. A sealed enclosure is commonly selected for a more compact installation, while a ported enclosure changes the system's output character. Confirm enclosure dimensions, amplifier capability, and vehicle clearances before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Subwoofer:\u003c\/strong\u003e Adds dedicated bass without requiring a larger driver format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 4-Ohm Voice Coil:\u003c\/strong\u003e Provides simple amplifier and wiring compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150W RMS Handling:\u003c\/strong\u003e Supports appropriate continuous-power amplifier matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Uses a light, rigid cone material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerimeter Voice-Coil Venting:\u003c\/strong\u003e Helps dissipate heat during operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped-Steel Basket:\u003c\/strong\u003e Provides a stable mounting structure for the driver.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVP10S4 combines a polypropylene cone, treated foam surround, ferrite magnet, and CAD-optimized stamped-steel basket. Its dual-stitched, ribbed surround and structure-reinforcing dust cap are part of the driver design. The subwoofer uses large-gauge spring terminals for speaker-wire connections.\u003c\/p\u003e\u003cp\u003ePlan for a 236 mm mounting diameter, 253 mm hole diameter, and 134 mm mounting depth when designing the enclosure and checking vehicle clearance. Pair the subwoofer with an external amplifier compatible with a 4-ohm single-voice-coil load and size the amplifier around its 150-watt RMS rating. Use it in a properly designed sealed or ported enclosure; an enclosure and amplifier are required for operation.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970395160739,"sku":"CER-CVP10S4","price":43.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71ht2GpUokL.jpg?v=1786152531"},{"product_id":"cerwin-vega-cer-cvp12s4","title":"Cerwin-Vega CVP12S4 12\" 4-Ohm SVC Subwoofer","description":"\u003cp\u003eThe Cerwin-Vega CVP12S4 is a 12-inch passive car subwoofer designed to add low-frequency output to a factory-system upgrade or custom audio build. Its single 4-ohm voice coil provides a straightforward load for matching with a compatible external amplifier. It is intended for listeners who want a dedicated bass driver without moving to a dual-voice-coil wiring configuration.\u003c\/p\u003e\u003cp\u003eRated at 200 watts RMS and 550 watts maximum, the CVP12S4 is built for systems that need controlled low-end reinforcement. Its 86.8 dB sensitivity and 28.4 Hz resonant frequency support bass-focused enclosure designs. The 8 mm one-way Xmax specification indicates capacity for substantial cone travel within its rated operating range.\u003c\/p\u003e\u003cp\u003eA light, rigid poly cone handles bass reproduction while a treated foam surround supports cone movement. The surround is dual stitched to the cone and uses a ribbed profile intended to help it retain its shape under higher output. A reinforcing dust cap is used as part of the driver structure.\u003c\/p\u003e\u003cp\u003eThe motor and frame design focus on cooling and stability. Perimeter venting at the voice coil is specified to assist heat dissipation, while a bumped backplate supports increased excursion. The driver is built on a CAD-optimized stamped-steel basket.\u003c\/p\u003e\u003cp\u003eThe CVP12S4 can be used in either sealed or ported enclosures, allowing a system to be tailored for more controlled bass or greater low-frequency output. Its 4-ohm single-coil layout makes amplifier selection and wiring relatively direct. Use the published mounting dimensions when choosing an enclosure, baffle, and installation location.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-Inch Subwoofer:\u003c\/strong\u003e Adds a dedicated low-frequency driver to a car audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 4-Ohm Voice Coil:\u003c\/strong\u003e Provides a simple nominal impedance load for amplifier matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200W RMS Rating:\u003c\/strong\u003e Supports continuous-power amplifier matching at its rated level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoly Cone:\u003c\/strong\u003e Combines low mass and rigidity for bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreated Foam Surround:\u003c\/strong\u003e Supports cone travel and is dual stitched for attachment reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented Motor Design:\u003c\/strong\u003e Perimeter voice-coil venting helps manage heat during operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVP12S4 uses a polypropylene cone, treated foam surround, reinforcing dust cap, and stamped-steel basket. Its ribbed, dual-stitched surround and bumped backplate are designed to support cone movement. Large-gauge spring terminals provide the speaker-wire connection points.\u003c\/p\u003e\u003cp\u003eMount the subwoofer in an enclosure designed for a 12-inch driver and follow the 301 mm cutout and 151 mm mounting-depth specifications. The manufacturer identifies the driver as compatible with sealed and ported enclosures; choose the enclosure type according to the system goal. Pair it with an external amplifier that is stable at a 4-ohm load and set amplifier gain conservatively.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970395193507,"sku":"CER-CVP12S4","price":49.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71ht2GpUokL_c3fc7e3c-a3ad-471c-8689-882a2cad59b4.jpg?v=1786152533"},{"product_id":"cerwin-vega-cer-cvp2400-1","title":"Cerwin-Vega CVP2400.1 Mono Class-D Car Amplifier","description":"\u003cp\u003eThe Cerwin-Vega CVP2400.1 is a compact mono Class-D car amplifier designed to power a dedicated subwoofer system. It provides a focused low-frequency amplification solution for vehicles where factory bass output is limited or an aftermarket subwoofer upgrade is planned. Its small chassis helps accommodate installations where available space is restricted.\u003c\/p\u003e\u003cp\u003eDesigned for bass applications, the CVP2400.1 delivers 370 watts RMS at 4 ohms, 660 watts RMS at 2 ohms, and 900 watts RMS at 1 ohm. The mono configuration concentrates its output into one subwoofer channel rather than powering a set of full-range speakers. This makes it suitable for matching with a properly wired subwoofer or subwoofer system that supports its impedance capability.\u003c\/p\u003e\u003cp\u003eThe amplifier uses a Class-D design with a full MOSFET DC-DC PWM power supply. Its frequency response is specified from 10 Hz to 400 Hz, covering the low-frequency range commonly used in vehicle subwoofer systems. Adjustable subsonic and low-pass filtering helps tailor the amplifier's output to the enclosure, subwoofer, and listening preferences.\u003c\/p\u003e\u003cp\u003eFor integration flexibility, the CVP2400.1 includes RCA inputs and high-level inputs with automatic turn-on capability. This allows it to work with many aftermarket head units as well as factory audio systems that provide speaker-level signals. Input sensitivity is adjustable from 250 mV to 6 V for matching the source signal level.\u003c\/p\u003e\u003cp\u003eA supplied subwoofer level remote control gives the driver a convenient way to attenuate the established bass level from the cabin. Protection circuitry addresses short-circuit, low-impedance, reverse-polarity, and overheating conditions. The result is a compact amplifier intended for a practical subwoofer upgrade in cars, trucks, and SUVs.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMono Class-D Design:\u003c\/strong\u003e Focuses amplifier output on a dedicated subwoofer channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Ohm Stable Output:\u003c\/strong\u003e Supports properly wired mono loads from 1 to 8 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Chassis:\u003c\/strong\u003e Fits more easily in limited under-seat or trunk space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Level Inputs:\u003c\/strong\u003e Helps integrate with compatible factory speaker-level audio signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Filters:\u003c\/strong\u003e Provides subsonic and low-pass frequency control for bass tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Bass Level Control:\u003c\/strong\u003e Lets the driver adjust the established subwoofer level from the cabin.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVP2400.1 uses a small 8.86-inch-long chassis with a double-sided, two-layer circuit board and surface-mount-device construction. Its Class-D platform and MOSFET DC-DC PWM power supply are engineered for compact vehicle-audio amplification. Power and protection status indication is provided on the amplifier.\u003c\/p\u003e\u003cp\u003eInstall the amplifier on a solid, ventilated surface with the controls accessible after mounting; avoid covering it with carpet or wiring. Use properly sized power, ground, remote-turn-on, signal, and speaker wiring, with an inline fuse near the vehicle battery as directed by the installation manual. A 4-ohm, 2-ohm, or 1-ohm subwoofer load should be selected only when its final wired impedance and power handling are appropriate for the corresponding amplifier rating.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970395291811,"sku":"CER-CVP2400-1","price":129.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/51NEPgh8wLL.jpg?v=1786152535"},{"product_id":"cerwin-vega-cer-cvp2400-4","title":"Cerwin-Vega CVP2400.4 4-Channel Class D Amplifier","description":"\u003cp\u003eThe Cerwin-Vega CVP2400.4 is a compact four-channel Class D car amplifier for adding dedicated power to an aftermarket or factory audio system. It is designed for drivers who want to run front and rear speakers, a component speaker system, or a bridged two-channel configuration from one small amplifier. Its compact chassis helps solve mounting-space limitations in cars, trucks, and SUVs.\u003c\/p\u003e\u003cp\u003eAt 4 ohms, the CVP2400.4 is rated for 120 watts RMS per channel, while its 2-ohm rating reaches 210 watts RMS per channel. This gives it the capacity to support speakers that need more power and control than a typical radio’s built-in amplifier can provide. When correctly set up, it can bring greater output capability and system headroom to a vehicle audio upgrade.\u003c\/p\u003e\u003cp\u003eThe amplifier uses a Class D design with a full MOSFET DC-DC PWM power supply. Its 10 Hz to 30 kHz frequency response supports full-range speaker applications, and adjustable high-pass and low-pass filters help tailor the signal for the speakers being used. The four-channel layout can also be bridged to provide 410 watts RMS to each of two 4-ohm loads.\u003c\/p\u003e\u003cp\u003eHigh-level inputs with automatic turn-on support integration with many factory radios, while low-level signal sensitivity supports aftermarket source units. This flexibility can simplify upgrades where replacing the existing radio is not preferred. A power\/protection indicator provides a visible operating-status reference.\u003c\/p\u003e\u003cp\u003eThe CVP2400.4 is part of Cerwin-Vega's CVP Series and measures less than nine inches long. It is suited to powering door speakers, component systems, or selected bridged speaker and subwoofer applications within its rated impedance limits. Built-in protection features are intended to help safeguard the amplifier during short-circuit, low-impedance, reverse-polarity, and overheating conditions.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Channel Class D Design:\u003c\/strong\u003e Powers up to four speakers from one compact amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120W x 4 RMS at 4 Ohms:\u003c\/strong\u003e Provides dedicated power for compatible full-range speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Stable Operation:\u003c\/strong\u003e Delivers up to 210W RMS per channel at 2 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridgeable Channels:\u003c\/strong\u003e Supports 410W RMS x 2 at 4 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Level Inputs:\u003c\/strong\u003e Helps integrate the amplifier with compatible factory radios.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Crossovers:\u003c\/strong\u003e Lets you set high-pass or low-pass filtering for the system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVP2400.4 uses a small chassis measuring 8.86 by 4.92 by 1.93 inches. Its construction includes a full MOSFET DC-DC PWM power supply, double-sided two-layer circuit board, and surface-mount-device technology. Protection circuitry covers short circuits, low impedance, reverse polarity, and overheating.\u003c\/p\u003e\u003cp\u003eMount the amplifier securely in a dry location with ventilation and access to its side-panel controls. It requires a negative-ground 12V DC vehicle electrical system; use appropriate fused power wiring, with the manufacturer documentation recommending a 4 AWG amplifier wiring kit. Maintain at least 2 ohms per channel in stereo operation or 4 ohms when bridged, and set crossover and gain controls to match the connected speakers.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970395324579,"sku":"CER-CVP2400-4","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61qbTGOO_aL.jpg?v=1786152537"},{"product_id":"cerwin-vega-cer-cvp2700-5","title":"Cerwin-Vega CVP2700.5 5-Channel Class D Amplifier","description":"\u003cp\u003eThe Cerwin-Vega CVP2700.5 is a compact five-channel Class D car amplifier designed to power four full-range speakers and a subwoofer from one chassis. It is suited to vehicle audio upgrades where installation space is limited but a single amplifier is needed for a complete speaker-and-subwoofer system. Its five-channel layout helps simplify system planning compared with using separate multi-channel and mono amplifiers.\u003c\/p\u003e\u003cp\u003eAt 4 ohms, the CVP2700.5 is rated for 80 watts RMS to each of four main channels plus 220 watts RMS to its subwoofer channel. At 2 ohms, it is rated for 130 watts RMS to each main channel and 400 watts RMS to the subwoofer channel. This output structure supports a balanced system with dedicated power for cabin speakers and low-frequency reinforcement.\u003c\/p\u003e\u003cp\u003eHigh-level inputs with 4V to 8V auto turn-on capability support integration with compatible factory or aftermarket radios. Low-level input sensitivity is rated from 250 mV to 6V for RCA-based installations. This flexibility makes the amplifier useful for upgrades that retain an existing source unit while adding amplified speakers and a subwoofer.\u003c\/p\u003e\u003cp\u003eThe amplifier uses a full MOSFET DC-DC PWM power supply and Class D architecture for compact, efficient power delivery. Its signal controls include adjustable high-pass filtering from 10Hz to 250Hz, adjustable low-pass filtering from 52Hz to 400Hz, and bass boost up to 12dB. These controls allow the installer to divide frequencies between speakers and the subwoofer according to the system design.\u003c\/p\u003e\u003cp\u003eProtection circuitry addresses short circuits, low-impedance conditions, reverse polarity, and overheating. A power\/protection indicator provides operating-status feedback, and a wired subwoofer level remote is included for convenient bass-level adjustment. With its 9.65-inch-long small chassis, the CVP2700.5 can fit locations where a larger conventional amplifier may be difficult to mount.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive-Channel Configuration:\u003c\/strong\u003e Powers four main speakers plus one subwoofer channel from one amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass D Architecture:\u003c\/strong\u003e Delivers efficient amplification in a compact chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Level Auto Turn-On:\u003c\/strong\u003e Supports compatible speaker-level signals from 4V to 8V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Crossovers:\u003c\/strong\u003e Helps direct appropriate frequencies to speakers and subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Bass Remote:\u003c\/strong\u003e Allows convenient adjustment of subwoofer output level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Protection:\u003c\/strong\u003e Helps guard against thermal, short-circuit, polarity, and impedance faults.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVP2700.5 uses a double-sided, two-layer PCB with SMD technology and a full MOSFET DC-DC PWM power supply. Its compact enclosure measures 9.65 by 4.92 by 1.93 inches, allowing placement in many space-conscious vehicle installations. Status LEDs indicate normal operation or a protection condition.\u003c\/p\u003e\u003cp\u003eInstall the amplifier with secure power, ground, remote-turn-on, signal, and speaker connections, following vehicle-safe wiring practices. Use RCA inputs with an aftermarket radio or the high-level input interface with a compatible factory-radio signal, then set gain and crossover controls for the connected speakers and subwoofer. The included wired subwoofer level remote can be mounted within reach of the driver for on-the-go bass adjustment.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970395357347,"sku":"CER-CVP2700-5","price":160.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/51gY3mTJeGL.jpg?v=1786152538"},{"product_id":"cerwin-vega-cer-cvp3600-1","title":"Cerwin-Vega CVP3600.1 Mono Class-D Amplifier","description":"\u003cp\u003eThe Cerwin-Vega CVP3600.1 is a compact mono Class-D amplifier designed to power a subwoofer system in a car, truck, or SUV. It provides a focused low-frequency amplifier channel for installations that need dedicated bass power without using a large amplifier footprint. The amplifier is rated for 500 watts RMS at 4 ohms, 900 watts RMS at 2 ohms, and 1,300 watts RMS at 1 ohm.\u003c\/p\u003e\u003cp\u003eThis model is suited to listeners building or upgrading a subwoofer section while retaining either a factory or aftermarket radio. Its high-level inputs support connection from speaker-level outputs, helping simplify integration when RCA preamp outputs are unavailable. Auto turn-on capability is specified for 4V to 8V high-level input signals.\u003c\/p\u003e\u003cp\u003eThe CVP3600.1 is a mono amplifier with a 10 Hz to 400 Hz frequency response, making it intended for bass and sub-bass reproduction rather than full-range speakers. A variable subsonic filter and low-pass filter allow the amplifier to be tailored to the subwoofer and enclosure being used. A 12 dB bass boost control is also provided for system adjustment.\u003c\/p\u003e\u003cp\u003eIts power section uses a full MOSFET DC-DC PWM power supply, while the internal construction uses a double-sided, 2-layer PCB with surface-mount-device technology. Cerwin-Vega specifies protection for short circuits, low impedance, reverse polarity, and overheating. A power protection indicator helps show the amplifier's operating status.\u003c\/p\u003e\u003cp\u003eAt 9.65 inches long, the small chassis is practical for installations where mounting room is limited. The included subwoofer level remote gives the driver convenient control of bass level from the cabin. It is a dedicated amplifier choice for properly matched subwoofer systems wired down to a 1-ohm load.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMono Class-D Design:\u003c\/strong\u003e Delivers dedicated power for a subwoofer channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Ohm Stable Output:\u003c\/strong\u003e Supports correctly wired low-impedance subwoofer loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Level Inputs:\u003c\/strong\u003e Connects with compatible factory or aftermarket radios.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto Turn-On:\u003c\/strong\u003e Activates from 4V to 8V high-level signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Filters:\u003c\/strong\u003e Adjusts subsonic and low-pass frequency settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Bass Remote:\u003c\/strong\u003e Provides convenient in-cabin subwoofer level adjustment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVP3600.1 uses a compact chassis measuring 9.65 x 4.92 x 1.93 inches. Its construction includes a double-sided, 2-layer circuit board and SMD technology, with a MOSFET-based DC-DC PWM power supply. Integrated protection circuitry is specified for short circuit, low impedance, reverse polarity, and overheating conditions.\u003c\/p\u003e\u003cp\u003eMount the amplifier on a solid surface with ventilation around the chassis and keep its controls accessible for setup. Use the variable subsonic and low-pass filters to suit the subwoofer enclosure and system tuning, and wire the connected subwoofer load no lower than the amplifier's 1-ohm stability rating. The amplifier uses four 35A fuses and is intended for negative-ground 12V vehicle electrical systems.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970395390115,"sku":"CER-CVP3600-1","price":164.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61SoMMvh-1L.jpg?v=1786152541"},{"product_id":"cerwin-vega-cer-cvp69","title":"Cerwin-Vega CVP69 6x9\" 4-Ohm Full-Range Speaker","description":"\u003cp\u003eThe Cerwin-Vega CVP69 is a single 6x9-inch PRO Series full-range car speaker designed for vehicle audio systems that need higher output capability than typical factory speakers. Its 4-ohm impedance makes it suitable for common car-audio amplifier channels and compatible system designs. It is intended for custom installations in cars, trucks, SUVs, vans, motorcycles, and other vehicle-based audio applications.\u003c\/p\u003e\u003cp\u003eWith a 150-watt RMS and 300-watt maximum power rating, the CVP69 is built for systems that prioritize strong output and controlled midrange presence. Its 94 dB sensitivity rating helps it produce substantial output from available amplifier power. The published 50 Hz to 20 kHz frequency-response range supports broad-band reproduction from a single pro-style driver.\u003c\/p\u003e\u003cp\u003eThe CVP69 uses a treated paper cone and treated cloth surround to provide a durable moving assembly for high-output use. A 1.5-inch high-temperature, single-layer voice coil supports its stated power handling. Its ferrite motor uses a high-density, high B\/L design intended to maintain driver control under demanding playback conditions.\u003c\/p\u003e\u003cp\u003eA heavy-duty stamped-steel basket provides a rigid mounting platform for the speaker assembly. The driver has a 20-ounce ferrite magnet structure and a 4.53-inch magnet diameter. This construction makes it a practical choice for installations where a pro-driver format and physical durability are priorities.\u003c\/p\u003e\u003cp\u003eThe CVP69 is sold individually, allowing installers to build a matched pair or larger multi-speaker layout as needed. It can be used as part of a high-output system with compatible amplification and optional dedicated tweeters or subwoofers. Verify the vehicle's mounting opening, mounting depth, wiring, and available power before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e150W RMS Power Handling:\u003c\/strong\u003e Supports amplifier-powered systems designed around substantial continuous output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch PRO Driver:\u003c\/strong\u003e Fits applications designed for an oval 6x9-inch speaker format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches many conventional car-audio amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e94 dB Sensitivity:\u003c\/strong\u003e Helps produce strong output from available amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreated Paper Cone:\u003c\/strong\u003e Provides a lightweight cone material for responsive sound reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped-Steel Basket:\u003c\/strong\u003e Provides a durable structural base for secure mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVP69 combines a treated paper cone, treated cloth surround, ferrite magnet, high-temperature voice coil, and stamped-steel basket. Its pro-driver construction is focused on output capability and mechanical durability. The speaker uses a single 4-ohm voice coil and does not include a grille.\u003c\/p\u003e\u003cp\u003eAllow for an 8.74 x 5.98-inch mounting cutout and 3.07 inches of mounting depth behind the mounting surface. Confirm that the vehicle panel has sufficient clearance for the 9.29 x 6.46-inch overall frame and 3.17-inch total depth. For best results, use secure mounting hardware, correct-polarity speaker wiring, and an amplifier channel matched appropriately to the speaker's 4-ohm load and 150-watt RMS rating.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970395455651,"sku":"CER-CVP69","price":28.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61uyNrKUwIL.jpg?v=1786152542"},{"product_id":"cerwin-vega-cer-cvp700-2","title":"Cerwin-Vega CVP700.2 2-Channel Class D Car Amplifier","description":"\u003cp\u003eThe Cerwin-Vega CVP700.2 is a compact 2-channel Class D car amplifier for adding dedicated power to an aftermarket or factory-based audio system. It is designed for installations where space is limited but additional speaker or subwoofer amplification is needed. Its small chassis can be placed in locations such as under a seat or behind an interior panel when properly mounted and ventilated.\u003c\/p\u003e\u003cp\u003eThis amplifier is suited to drivers upgrading front speakers, rear speakers, or a single bridged subwoofer channel. It delivers 80 watts RMS per channel at 4 ohms, 160 watts RMS per channel at 2 ohms, or 310 watts RMS bridged at 4 ohms. These output options allow it to support a range of two-speaker and single-subwoofer system layouts.\u003c\/p\u003e\u003cp\u003eThe CVP700.2 uses a Class D amplifier platform with a full MOSFET DC-DC PWM power supply. Its rated frequency response spans 10 Hz to 30 kHz, supporting full-range speaker applications as well as filtered subwoofer duty. Adjustable high-pass and low-pass filters help tailor the amplifier output to the speakers being powered.\u003c\/p\u003e\u003cp\u003eHigh-level inputs with automatic turn-on support integration with compatible factory radios, while RCA inputs support aftermarket source units. The gain control provides a 0.25V to 6V input-sensitivity range for matching the amplifier to the source signal. A selectable HPF, LPF, or flat crossover mode helps adapt the channels to component speakers, coaxial speakers, or a bridged subwoofer.\u003c\/p\u003e\u003cp\u003eProtection features include short-circuit, low-impedance, reverse-polarity, and overheating protection. Power and protection status indication helps identify normal operation or a protection condition. For a complete upgrade, pair the CVP700.2 with speakers or a bridged 4-ohm subwoofer whose RMS handling and impedance are appropriate for its rated output.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Channel Class D Design:\u003c\/strong\u003e Powers a pair of speakers or one bridged 4-ohm load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Chassis:\u003c\/strong\u003e Fits more easily in space-limited vehicle installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e160W x 2 at 2 Ohms:\u003c\/strong\u003e Provides higher output for compatible stereo speaker loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Level Input with Auto Turn-On:\u003c\/strong\u003e Supports compatible factory-radio integration without a separate remote signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Crossovers:\u003c\/strong\u003e High-pass and low-pass filtering helps match the amplifier to the system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In Protection Circuits:\u003c\/strong\u003e Helps protect against short circuit, heat, polarity, and low-impedance conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVP700.2 has a small 7.28 x 4.92 x 1.93-inch chassis, a double-sided 2-layer circuit board, and surface-mount-device construction. Its Class D design and MOSFET DC-DC PWM power supply are intended to provide an efficient compact amplifier platform. The chassis includes power, speaker, RCA, and high-level input connections, along with crossover, gain, and bass-boost controls.\u003c\/p\u003e\u003cp\u003eMount the amplifier securely to a stable vehicle surface with adequate ventilation, avoiding cardboard or flexible plastic trim panels. Use a properly fused power connection, a short solid chassis ground, and correctly sized wiring; a 4 AWG amplifier wiring kit is recommended for installation. Keep stereo speaker loads at 2 ohms or higher per channel, and use a 4-ohm or higher load when the amplifier is bridged.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970395488419,"sku":"CER-CVP700-2","price":85.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/51NhWvJ6_rL.jpg?v=1786152544"},{"product_id":"cerwin-vega-cer-cvpm400-4d","title":"Cerwin-Vega CVPM400.4D 4-Channel Class-D Amplifier","description":"\u003cp\u003eThe Cerwin-Vega CVPM400.4D is a compact four-channel car audio amplifier designed to add dedicated power to front and rear speakers. It is a practical choice for replacing the limited output of a factory radio or supporting an aftermarket head unit. Its four-channel layout can drive a full speaker system or be configured for a three-channel setup using two bridged channels.\u003c\/p\u003e\u003cp\u003eRated at 60 watts RMS per channel at 4 ohms, the CVPM400.4D is suited to efficiently powering compatible coaxial or component speakers. It can also deliver 90 watts RMS per channel at 2 ohms when the speaker load and installation are appropriate. The amplifier is designed for clean, controlled speaker output rather than relying on head-unit power alone.\u003c\/p\u003e\u003cp\u003eFull Class-D topology and a full PWM power supply help the amplifier provide useful output from a notably small chassis. The compact 7.64-inch-long enclosure can make placement easier in vehicles with limited installation room. A 10.0 to 17.0V DC operating range supports use in conventional negative-ground 12V vehicle electrical systems.\u003c\/p\u003e\u003cp\u003eBuilt-in high-pass filtering is adjustable from 15 to 250 Hz, allowing the amplifier to be matched to door, dash, or rear-deck speakers. The high-pass crossover is always active, with its lowest setting intended to function close to full-range operation. Vega Bass Boost provides adjustable low-frequency boost from 0 to +12 dB at 45 Hz for systems that can accommodate it.\u003c\/p\u003e\u003cp\u003eThe CVPM400.4D accepts high- or low-level input signals, making it adaptable to many factory and aftermarket source units. It also includes power and protection status indicators, a remote level-control port, and bridge capability for two 4-ohm speaker loads. Pair it with properly matched speakers, suitable wiring, and a fused power connection for a compact multi-speaker upgrade.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Channel Design:\u003c\/strong\u003e Powers front and rear speakers from one compact amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass-D Topology:\u003c\/strong\u003e Delivers efficient amplification in a small chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W RMS at 4 Ohms:\u003c\/strong\u003e Provides dedicated power for compatible full-range speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Stable Stereo Operation:\u003c\/strong\u003e Supports 90W RMS per channel at 2 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable High-Pass Filter:\u003c\/strong\u003e Helps protect speakers from unwanted low frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh- and Low-Level Inputs:\u003c\/strong\u003e Works with speaker-level or RCA source signals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVPM400.4D uses a compact digital amplifier platform with a full PWM power supply and an internal ATC mini fuse. Its side-panel controls provide access to gain, high-pass crossover adjustment, bass boost, input connections, power terminals, and speaker terminals. Power and protection LEDs help indicate normal operation or a protection condition.\u003c\/p\u003e\u003cp\u003eInstall the amplifier on a solid, ventilated surface with its controls accessible after mounting. Use at least 8-gauge power and ground wire, 18-gauge remote wire, and a properly sized external fuse near the vehicle battery; maintain a minimum 2-ohm stereo load or 4-ohm bridged load. For speaker systems, begin high-pass adjustment around 60 to 80 Hz and set gain carefully to match the source unit without using it as a volume control.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970395521187,"sku":"CER-CVPM400-4D","price":108.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/618zAZJW9XL.jpg?v=1786152546"},{"product_id":"cerwin-vega-cer-cvpro2k4","title":"Cerwin-Vega CVPRO2K4 4-Channel Class D Car Amplifier","description":"\u003cp\u003eThe Cerwin-Vega CVPRO2K4 is a four-channel Class D car audio amplifier for systems that need substantial power in a compact chassis. It can run front and rear speakers from four channels or be bridged for higher-power two-channel applications. Its 2-ohm-stable channel design provides flexibility when matching the amplifier to compatible speaker loads.\u003c\/p\u003e\u003cp\u003eThis amplifier is suited to enthusiasts building a high-output speaker system, upgrading component speakers, or designing a custom multi-amplifier installation. It supplies 325 watts RMS per channel at 4 ohms or 520 watts RMS per channel at 2 ohms. For bridged configurations, it is rated at 1,000 watts RMS per pair of channels into 4 ohms.\u003c\/p\u003e\u003cp\u003eThe CVPRO2K4 uses a full-range Class D topology and a full PWM power supply. Its specified bandwidth extends from 15 Hz to 20 kHz, allowing it to support bass, midrange, and high-frequency drivers when the system is configured appropriately. A damping factor greater than 150 and a specified THD figure of 0.1% at 1 kHz and 4 ohms support controlled signal delivery.\u003c\/p\u003e\u003cp\u003eSystem tuning is handled with selectable high-pass, flat, and low-pass crossover modes. The crossover network uses a 12 dB-per-octave slope, with variable high-pass, low-pass, and subsonic-filter adjustments. Variable bass boost is also provided for users who need to tailor low-frequency response carefully.\u003c\/p\u003e\u003cp\u003eDesigned for vehicle installation, the CVPRO2K4 has a compact 10.4 by 8.8 by 2.6 inch footprint. RCA preamp inputs connect the amplifier to a compatible source unit, while power, ground, remote-turn-on, and speaker terminals support a conventional amplified car-audio installation. Power\/protection and clipping indicators provide at-a-glance operating status.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Channel Class D Design:\u003c\/strong\u003e Powers a full speaker system from a compact, efficient amplifier platform.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Stable Channels:\u003c\/strong\u003e Supports compatible 2-ohm speaker loads on each unbridged channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridgeable Output:\u003c\/strong\u003e Combines channel pairs for higher-power 4-ohm speaker applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Crossovers:\u003c\/strong\u003e Helps match output frequencies to speakers, subs, or pro-audio drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Bass Boost:\u003c\/strong\u003e Provides adjustable low-frequency boost from 0 to 12 dB.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatus And Clip LEDs:\u003c\/strong\u003e Shows power, protection, and clipping status during operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVPRO2K4 uses a rugged, ventilated amplifier chassis with a compact footprint intended for custom vehicle audio installations. Its full PWM power supply, high-current design, and protection-status indication are intended for demanding amplified systems. The amplifier measures 10.4 by 8.8 by 2.6 inches, so it can fit where larger multi-channel amplifiers may be difficult to mount.\u003c\/p\u003e\u003cp\u003eMount the amplifier on a solid surface with ventilation around the chassis and keep its control panel accessible for adjustment. Use a negative-ground 12-volt vehicle electrical system, route RCA signal cables away from power wiring where practical, and use properly fused power wiring. Cerwin-Vega recommends 0\/1-gauge OFC power and ground wire, and the amplifier is designed for a 150-amp fuse rating.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970395553955,"sku":"CER-CVPRO2K4","price":293.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61yfZXh8N9L.jpg?v=1786152548"},{"product_id":"cerwin-vega-cer-eq770","title":"Cerwin-Vega EQ770 7-Band Parametric Car Audio Equalizer","description":"\u003cp\u003eThe Cerwin-Vega EQ770 is a 7-band car audio equalizer designed to give a compatible mobile audio system more direct control over tonal balance and signal level. It is installed between a source unit and external amplifiers, making it useful when a system needs more tuning flexibility than basic head-unit controls provide. Dedicated front, rear, and subwoofer outputs support a multi-amplifier system layout.\u003c\/p\u003e\u003cp\u003eThis processor is intended for listeners building or refining an amplified car audio system with separate bass control. Its seven EQ controls address fixed center frequencies from 50 Hz through 16 kHz, helping users adjust bass weight, vocal presence, and high-frequency balance. A master volume control and separate subwoofer-level control make it easier to tailor overall and bass output from the front panel.\u003c\/p\u003e\u003cp\u003eThe EQ770 provides up to 7 volts RMS of output for sending a strong preamp-level signal to compatible amplifiers. Its specified 10 Hz to 50 kHz frequency response, 90 dB signal-to-noise ratio, and 70 dB channel separation support clean signal routing within a properly configured system. The unit uses an onboard 30V bipolar switching power supply.\u003c\/p\u003e\u003cp\u003eFor bass-system integration, the EQ770 includes a selectable low-pass frequency setting at 60 Hz or 90 Hz. This provides a simple way to choose the low-pass point used for the subwoofer output. A front-to-rear fader control is also provided for systems using four speakers.\u003c\/p\u003e\u003cp\u003eSource flexibility includes main, auxiliary, and AUX 2\/MP3 input options, with an AUX\/Main source selector and auxiliary gain control. The EQ770 is a practical upgrade for systems using external amplifiers and RCA signal connections. Its night-illumination design keeps the front-panel controls visible during nighttime driving.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e7-Band Equalizer:\u003c\/strong\u003e Adjusts seven fixed frequency ranges for more detailed tonal tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7V RMS Output:\u003c\/strong\u003e Sends a high-level preamp signal to compatible external amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubwoofer Level Control:\u003c\/strong\u003e Adjusts bass-output level independently from the main volume.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Low-Pass Filter:\u003c\/strong\u003e Offers 60 Hz or 90 Hz subwoofer frequency selection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree Preamp Output Zones:\u003c\/strong\u003e Provides dedicated front, rear, and subwoofer signal outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAUX and MP3 Inputs:\u003c\/strong\u003e Adds source options beyond the main audio input.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe EQ770 uses a compact under-dash processor layout with front-panel rotary controls for volume, subwoofer level, fader, auxiliary gain, and equalizer adjustment. Its RCA input and output connections are nickel-plated, and the front panel includes night illumination. The control layout places frequently adjusted system settings within easy reach.\u003c\/p\u003e\u003cp\u003eMount the unit beneath the dashboard or on a suitable interior hump using the supplied-style bracket arrangement described in the manual. The wiring diagram routes the main source into the equalizer, then routes front, rear, and subwoofer outputs to their respective external amplifiers; it also requires switched +12V, ground, and remote-turn-on connections. Use the 60 Hz or 90 Hz low-pass selection with the subwoofer amplifier path, then set output levels conservatively during system tuning.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970395586723,"sku":"CER-EQ770","price":66.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/51iswd0_9GL.jpg?v=1786152550"},{"product_id":"cerwin-vega-cer-h15dv2","title":"Cerwin-Vega H15DV2 15\" Dual 2-Ohm Car Subwoofer","description":"\u003cp\u003eThe Cerwin-Vega H15DV2 is a 15-inch HED Series car audio subwoofer designed to add low-frequency output to a custom vehicle sound system. Its dual 2-ohm voice coils provide wiring flexibility for matching the subwoofer to a compatible mono amplifier. It is a passive subwoofer, so it requires an external amplifier and an enclosure.\u003c\/p\u003e\u003cp\u003eThis model is suited to listeners building a bass-focused system who have room for a full-size 15-inch driver and enclosure. Its 750-watt RMS power rating supports use in systems designed for substantial continuous bass output. The 25 Hz free-air resonance and 11 mm Xmax support low-frequency extension when used with an appropriate enclosure.\u003c\/p\u003e\u003cp\u003eThe H15DV2 uses a 4-inch voice coil, ferrite motor structure, and dual voice-coil layout. These elements are intended to support power handling and give installers impedance options. With both 2-ohm coils connected, it can be wired for either a 1-ohm parallel load or a 4-ohm series load.\u003c\/p\u003e\u003cp\u003eA polypropylene cone and treated foam surround form the moving assembly, while the stamped-steel basket provides the mounting structure. The driver has a sensitivity rating of 86 dB at 1 watt\/1 meter. Its published Thiele\/Small parameters can help an experienced installer or enclosure builder plan a system around the subwoofer.\u003c\/p\u003e\u003cp\u003eThe H15DV2 can be used in either sealed or ported enclosures, allowing the system to be tailored to installation space and listening preferences. A sealed design is commonly selected for a more compact enclosure approach, while a ported design is commonly used when enclosure volume and tuning are planned for greater low-frequency output. Confirm amplifier stability, enclosure dimensions, and vehicle clearance before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e15-Inch HED Subwoofer:\u003c\/strong\u003e Provides a large cone area for a bass-focused car audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 2-Ohm Voice Coils:\u003c\/strong\u003e Supports 1-ohm parallel or 4-ohm series wiring configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e750W RMS Power Handling:\u003c\/strong\u003e Matches with an amplifier sized for 750 watts RMS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Inch Voice Coil:\u003c\/strong\u003e Supports the driver's published continuous power capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFerrite Motor:\u003c\/strong\u003e Provides the magnetic motor structure for the woofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Or Ported Compatibility:\u003c\/strong\u003e Allows enclosure selection based on system goals and available space.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H15DV2 combines a polypropylene cone, treated foam surround, ferrite magnet, and stamped-steel basket. Its published overall diameter is 15.63 inches, and its overall height is 8.39 inches. The 4-inch voice coil and 11 mm maximum linear excursion specification are part of its bass-driver design.\u003c\/p\u003e\u003cp\u003eAllow for a 13.94-inch cutout and at least 7.66 inches of mounting depth, plus clearance for terminals and enclosure construction. Connect both voice coils and select series or parallel wiring only when the connected amplifier is stable at the resulting load. Use the published parameters when designing a sealed or ported enclosure, and secure the driver with appropriate mounting hardware.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970395619491,"sku":"CER-H15DV2","price":146.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71FKwaH7J3L_f17fbcbf-d70e-4f18-8bb5-59abad922a4f.jpg?v=1786152552"},{"product_id":"cerwin-vega-cer-h15dv4","title":"Cerwin-Vega H15DV4 15\" Dual 4-Ohm Subwoofer","description":"\u003cp\u003eThe Cerwin-Vega H15DV4 is a 15-inch HED Series car audio subwoofer designed to add substantial low-frequency output to a custom vehicle sound system. Its dual 4-ohm voice coils provide wiring flexibility for matching a compatible mono or multi-channel amplifier. It is intended for listeners building a dedicated bass system rather than relying on factory speakers alone.\u003c\/p\u003e\u003cp\u003eWith a 750-watt RMS power rating and 2,250-watt maximum rating, the H15DV4 is suited to systems that need a large-diameter woofer with meaningful power capability. Its 15-inch cone area helps move air for weighty bass reproduction. The 27 Hz resonant frequency supports low-frequency extension when the driver is used in a properly designed enclosure.\u003c\/p\u003e\u003cp\u003eThe subwoofer uses a hybrid polypropylene and treated paper cone to balance rigidity and responsiveness. A stitch-reinforced treated TPE foam surround is designed to support extended cone travel, while the ferrite motor structure supplies the magnetic force needed for controlled operation. This combination gives the H15DV4 a bass-forward character appropriate for high-output car audio builds.\u003c\/p\u003e\u003cp\u003eDual 4-ohm coils allow the H15DV4 to be wired for either a 2-ohm parallel load or an 8-ohm series load. Both voice coils should be connected to an amplification source, and the amplifier must be stable at the final impedance. This makes the subwoofer useful for installers tailoring a system around an amplifier's rated load capability.\u003c\/p\u003e\u003cp\u003eThe H15DV4 can be installed in either a sealed or ported subwoofer enclosure. A sealed design is suited to controlled bass response, while a ported enclosure can emphasize output when designed for the driver. Its 7.66-inch mounting depth and 13.94-inch cutout requirement should be checked carefully before selecting an enclosure or mounting location.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e15-Inch HED Woofer:\u003c\/strong\u003e Large cone area supports strong low-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Coils:\u003c\/strong\u003e Supports 2-ohm parallel or 8-ohm series wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e750W RMS Handling:\u003c\/strong\u003e Matches with appropriately rated external amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid Cone:\u003c\/strong\u003e Polypropylene and treated paper balance strength and response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReinforced Foam Surround:\u003c\/strong\u003e Supports excursion while maintaining cone support.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Or Ported Use:\u003c\/strong\u003e Works with either enclosure approach.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H15DV4 is built around a stamped-steel basket, ferrite ceramic magnet, hybrid cone, and treated foam surround. Its 4-inch voice coil diameter and 11 mm Xmax are part of a design intended for substantial excursion and power handling. The overall driver diameter is 15.63 inches, with an overall height of 8.39 inches.\u003c\/p\u003e\u003cp\u003ePlan the installation around the 13.94-inch cutout diameter and 7.66-inch mounting depth, leaving adequate clearance behind the motor structure. Wire both 4-ohm voice coils with correct polarity and choose either series or parallel wiring only if the amplifier supports the resulting 8-ohm or 2-ohm load. Use a securely mounted sealed or ported enclosure, protect wiring from sharp edges, and use grommets where wires pass through drilled metal openings.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970395652259,"sku":"CER-H15DV4","price":146.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71FKwaH7J3L.jpg?v=1786152554"},{"product_id":"cerwin-vega-cer-h25","title":"Cerwin-Vega H25 2.5\" Full-Range Car Speakers","description":"\u003cp\u003eThe Cerwin-Vega H25 is a pair of compact 2.5-inch full-range car speakers for replacing small factory speakers or completing a custom vehicle audio installation. Their compact mounting dimensions suit locations where a larger door or dash speaker will not fit. Each speaker uses a 4-ohm nominal impedance for compatibility with many car-audio speaker circuits.\u003c\/p\u003e\u003cp\u003eWith 10 watts RMS and 30 watts maximum power handling per speaker, the H25 is intended for low-power factory-radio or appropriately matched amplified applications. Its 83 Hz to 20 kHz frequency-response specification supports a broad range of musical detail within a small-speaker format. A sensitivity rating of 82 dB at 1W\/1m indicates that proper power matching is important for expected output.\u003c\/p\u003e\u003cp\u003eThe H25 uses a responsive treated paper cone to reproduce the audible range assigned to the speaker. A UV-treated foam surround supports cone movement while helping the assembly withstand normal automotive conditions. The full-range design provides a practical solution where a separate tweeter and crossover system are not required.\u003c\/p\u003e\u003cp\u003eA strontium ferrite magnet motor structure supports the speaker's operation, while the powder-coated stamped-steel basket provides a rigid mounting foundation. This construction is designed to help control unwanted vibration at the speaker frame. The result is a compact replacement speaker focused on clear, direct sound in small factory locations.\u003c\/p\u003e\u003cp\u003eSold as a pair, the H25 can be used for left- and right-channel replacement in compatible vehicle positions. A speaker fitment adapter is included to assist with installation in applicable factory locations. Cerwin-Vega identifies the H25 for drop-in use in select GM, Ford, Chrysler, Jeep, Dodge, and Asian-import factory-speaker locations, but vehicle-specific fitment should always be checked before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5-Inch Full-Range Design:\u003c\/strong\u003e Fits compact speaker locations while covering a broad frequency range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10W RMS Power Handling:\u003c\/strong\u003e Supports appropriately matched factory-radio or amplified systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreated Paper Cone:\u003c\/strong\u003e Provides responsive full-range sound reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Treated Foam Surround:\u003c\/strong\u003e Supports cone movement and material durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrontium Ferrite Magnet:\u003c\/strong\u003e Provides the speaker's magnetic motor structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment Adapter Included:\u003c\/strong\u003e Helps adapt the speakers for applicable factory locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H25 combines a treated paper cone, UV-treated foam surround, strontium ferrite woofer magnet, and powder-coated stamped-steel basket. Its basket construction provides a stable frame for the compact driver. The set is sold as two speakers for stereo installation.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle has sufficient space for the 2.36-inch overall diameter, 2.05-inch cutout, 1.26-inch mounting depth, and 1.42-inch overall height before purchase. Match the speakers to a 4-ohm audio system and keep amplifier power appropriate for the 10-watt RMS rating per speaker. The included fitment adapter may assist in compatible factory locations, though mounting and wiring requirements vary by vehicle.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970395685027,"sku":"CER-H25","price":44.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61K0-6ZdeRL_93fd4ac7-2439-4bc5-88b0-3ba295432848.jpg?v=1786152556"},{"product_id":"cerwin-vega-cer-h35","title":"Cerwin-Vega H35 3.5\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega H35 is a pair of compact 3.5-inch, 2-way coaxial car speakers designed for replacing factory speakers in space-limited locations. Each speaker combines a woofer and tweeter in one assembly, helping simplify a full-range speaker upgrade. It is suited to vehicles with compatible 3.5-inch factory locations and adequate mounting clearance.\u003c\/p\u003e\u003cp\u003eWith 40 watts RMS and 120 watts maximum power handling per speaker, the H35 is intended for use with a compatible factory radio or an appropriately matched aftermarket amplifier. Its 4-ohm nominal impedance suits common car-audio speaker circuits. The 84 Hz to 20 kHz published frequency response covers midrange and high-frequency duties in a compact format.\u003c\/p\u003e\u003cp\u003eThe H35 uses a responsive polypropylene woofer cone with a UV-treated foam surround. This material combination is designed to support controlled cone movement while adding resistance to sun-related wear. A strontium ferrite woofer magnet provides the motor structure for the woofer section.\u003c\/p\u003e\u003cp\u003eHigh frequencies are handled by a dynamically balanced 1-inch PEI balanced-dome tweeter with a neodymium magnet. An integrated crossover directs the appropriate frequency range to the woofer and tweeter. Built-in tweeter protection is included to help protect the high-frequency driver during demanding playback.\u003c\/p\u003e\u003cp\u003eFor a clean installation, the H35 has a 3.11-inch cutout requirement and a 1.54-inch mounting depth. Its rigid stamped-steel basket is powder coated, and the pair does not include grilles according to the manufacturer specification chart. Confirm vehicle-specific fitment, panel clearance, and mounting-hole alignment before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.5-Inch 2-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter functions in each compact speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40W RMS Per Speaker:\u003c\/strong\u003e Supports power matching with compatible head units or amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cone:\u003c\/strong\u003e Provides a lightweight cone material for midrange and bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Treated Foam Surround:\u003c\/strong\u003e Helps support long-term durability in vehicle environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch PEI Dome Tweeter:\u003c\/strong\u003e Handles upper-frequency detail with a neodymium tweeter magnet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Crossover Protection:\u003c\/strong\u003e Routes frequencies between drivers and protects the tweeter.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H35 uses a powder-coated, rigid stamped-steel basket with a strontium ferrite woofer magnet. Its woofer uses a polypropylene cone and UV-treated foam surround, while the centrally mounted PEI balanced-dome tweeter uses a neodymium magnet. The set is sold as a pair and is specified without grilles.\u003c\/p\u003e\u003cp\u003eVerify that the mounting location accepts a 3.11-inch cutout, 1.54-inch mounting depth, and 3.43-inch speaker diameter before ordering. Mount the speakers securely to a flat baffle and seal the frame to reduce air leaks around the mounting surface. Observe speaker polarity when wiring and use an amplifier or receiver compatible with 4-ohm speakers.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970395717795,"sku":"CER-H35","price":36.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71_IM6REBML.jpg?v=1786152559"},{"product_id":"cerwin-vega-cer-h40","title":"Cerwin-Vega H40 4\" 2-Way Coaxial Speaker Set","description":"\u003cp\u003eThe Cerwin-Vega H40 is a pair of 4-inch, 2-way coaxial car speakers designed to replace compact factory speakers or support a custom full-range audio upgrade. Its coaxial layout places the tweeter and woofer together, helping simplify installation where space is limited. The set is intended for vehicle locations that accept a 4-inch speaker and have sufficient mounting clearance.\u003c\/p\u003e\u003cp\u003eRated at 50 watts RMS and 150 watts maximum, the H40 is suited to systems using a compatible factory radio or aftermarket amplification. Its 4-ohm nominal impedance matches the common impedance used by many car-audio speaker systems. The 85 Hz to 20 kHz frequency response focuses on midrange and high-frequency reproduction, with bass support available from larger speakers or a subwoofer when desired.\u003c\/p\u003e\u003cp\u003eA responsive polypropylene woofer cone handles the main vocal, midrange, and upper-bass duties. The UV-treated foam surround supports cone movement and is designed for durability in automotive use. With an 84 dB sensitivity rating, proper power matching and clean signal setup are important for getting the most from the speakers.\u003c\/p\u003e\u003cp\u003eThe H40 uses a dynamically balanced 1\/2-inch PEI tweeter with a neodymium magnet for high-frequency reproduction. An integrated crossover directs frequencies between the woofer and tweeter, while built-in tweeter protection helps safeguard the high-frequency driver. This design keeps the system compact without requiring an external crossover module.\u003c\/p\u003e\u003cp\u003eFor an upgrade path, the H40 can serve in dash, door, or other compact factory speaker positions when the vehicle's fitment and clearances match its measurements. It is sold as a stereo pair and includes mesh steel grilles for installations where the speakers are exposed. Confirm the 3.70-inch cutout requirement and 1.81-inch mounting depth before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Inch 2-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in one compact speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50W RMS Power Rating:\u003c\/strong\u003e Supports appropriately matched factory or aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cone:\u003c\/strong\u003e Provides responsive midrange and upper-bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/2-Inch PEI Tweeter:\u003c\/strong\u003e Handles high frequencies in the coaxial assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Tweeter Protection:\u003c\/strong\u003e Helps protect the tweeter during high-level playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMesh Steel Grilles Included:\u003c\/strong\u003e Adds protection for exposed speaker installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H40 uses a powder-coated, rigid stamped steel basket, a polypropylene cone, and a UV-treated foam surround. Its woofer uses a strontium ferrite magnet, while the tweeter uses a neodymium magnet. These materials support a compact, vehicle-oriented speaker design.\u003c\/p\u003e\u003cp\u003eMeasure the vehicle's opening, panel clearance, and window or mechanism clearance before mounting. The required cutout diameter is 94 mm (3.70 inches), and mounting depth is 46 mm (1.81 inches). Mount the speaker securely to a flat baffle, seal around the frame to reduce air leaks, observe polarity, and use a grommet where speaker wire passes through metal.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970395750563,"sku":"CER-H40","price":43.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71k-d65oJQL.jpg?v=1786152560"},{"product_id":"cerwin-vega-cer-h410","title":"Cerwin-Vega H410 4\"x10\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega H410 is a 4-inch by 10-inch, 2-way coaxial full-range speaker set for replacing compatible factory car speakers. It combines a woofer and tweeter in each speaker to cover bass, midrange, and high-frequency content from one mounting location. The set is sold as a pair for a matched left-and-right speaker upgrade.\u003c\/p\u003e\u003cp\u003eDesigned for vehicles using the uncommon 4-inch by 10-inch speaker format, the H410 helps retain a factory-style fit while updating worn or limited original speakers. Its 4-ohm nominal impedance suits typical mobile-audio speaker applications. Confirm the vehicle's opening dimensions, mounting depth, and panel clearance before installation.\u003c\/p\u003e\u003cp\u003eThe H410 is rated for 70 watts RMS and 210 watts maximum power handling. With a 90 Hz to 20 kHz frequency response and 89 dB sensitivity at 1 watt\/1 meter, it is intended for full-range playback in an appropriate vehicle installation. It can be used as part of a basic speaker replacement or in a system supported by a properly matched amplifier.\u003c\/p\u003e\u003cp\u003eA polypropylene woofer cone and UV-treated foam surround form the low- and mid-frequency section of each speaker. The coaxial 1-inch PEI tweeter is dynamically balanced and uses a neodymium magnet. An integrated crossover directs frequencies between the woofer and tweeter while providing tweeter protection.\u003c\/p\u003e\u003cp\u003eFor structural support, the H410 uses a rigid stamped-steel basket with a powder-coated finish and a strontium ferrite woofer magnet. Its 2.36-inch mounting depth can be useful where rear-deck or door-panel space is limited, but depth behind the mounting surface must be checked. The speakers do not include grilles according to the manufacturer specification table.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4\"x10\" Coaxial Format:\u003c\/strong\u003e Fits compatible oval speaker openings with integrated full-range drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70W RMS Power Handling:\u003c\/strong\u003e Supports amplifier matching up to its continuous power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cone:\u003c\/strong\u003e Provides the woofer diaphragm material for full-range playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\" PEI Tweeter:\u003c\/strong\u003e Handles high-frequency reproduction within the coaxial assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Crossover:\u003c\/strong\u003e Separates woofer and tweeter frequency duties internally.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Treated Foam Surround:\u003c\/strong\u003e Supports cone movement and durability in vehicle use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H410 combines a polypropylene cone, UV-treated foam surround, strontium ferrite woofer magnet, and neodymium tweeter magnet. Its rigid stamped-steel basket is powder coated, and the coaxial layout places the tweeter within the woofer assembly. This construction is designed for a conventional full-range vehicle-speaker installation.\u003c\/p\u003e\u003cp\u003eUse the 9.41-inch by 3.78-inch cutout requirement, 10.90-inch by 4.33-inch overall frame size, and 2.36-inch mounting depth to verify fitment. Mount the speakers securely to a flat baffle and seal the frame to help prevent air leaks; check window, trim-panel, and structural clearance before cutting. Observe speaker polarity and protect any new wiring with grommets where it passes through metal.\u003c\/p\u003e","brand":"CERWIN VEGA","offers":[{"title":"Default Title","offer_id":47970395783331,"sku":"CER-H410","price":56.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71eb9fvlruL.jpg?v=1786152562"}],"url":"https:\/\/nsiexport.com\/collections\/cerwin-vega.oembed","provider":"NSI Export","version":"1.0","type":"link"}