{"title":"Analog Mixers","description":null,"products":[{"product_id":"mackie-mix-series-mix8-8-channel-mixer-black","title":"Mackie Mix Series Mix8 8-Channel Mixer, Black","description":"\u003cp\u003eThe Mackie Mix8 is an 8-channel compact analog mixer designed to bring microphones, instruments, playback sources, and external effects together in one straightforward control center. It provides two mic\/line channels plus stereo line-input channels for small live sound, rehearsal, content-creation, and basic recording setups. Its compact layout helps users manage several sources without requiring a large-format console.\u003c\/p\u003e\u003cp\u003eTwo mic\/line inputs use Mackie low-noise preamps and accept balanced XLR microphone connections or 1\/4-inch line-level connections. A global phantom-power switch supports compatible condenser microphones. Gain controls, channel level controls, pan or balance controls, and overload LEDs help set levels cleanly before the signal reaches the main mix.\u003c\/p\u003e\u003cp\u003eEach channel includes 3-band EQ for practical tonal adjustment, with shelving high and low controls plus a peaking midrange control. The EQ is centered at 12 kHz, 2.5 kHz, and 80 Hz, respectively, with up to 15 dB of boost or cut. This provides useful control for balancing vocals, instruments, keyboards, playback devices, and other line-level sources.\u003c\/p\u003e\u003cp\u003eThe Mix8 includes an auxiliary send for feeding a monitor mix or an external effects processor. Its stereo aux return can bring processed effects back into the mix, or serve as an additional stereo line-input path when needed. The aux send is post-fader, so changes to a channel level also affect the amount sent to the auxiliary bus.\u003c\/p\u003e\u003cp\u003eFor connecting the rest of a system, the mixer provides main left\/right outputs, separate control-room outputs, a headphone output, and dedicated stereo RCA tape inputs and outputs. The main outputs can feed powered speakers or an amplifier connected to passive speakers, while the control-room outputs are suited to powered monitors or a headphone distribution amplifier. RCA I\/O provides an analog path for playback and stereo recording with compatible equipment.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight-Channel Format:\u003c\/strong\u003e Combines mic, stereo line, and aux-return signal paths in a compact mixer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Mic\/Line Inputs:\u003c\/strong\u003e Connect microphones or line-level sources through two versatile input channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlobal Phantom Power:\u003c\/strong\u003e Supplies phantom power to compatible condenser microphones connected by XLR.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Band EQ:\u003c\/strong\u003e Adjusts low, mid, and high frequencies on every channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost-Fader Aux Send:\u003c\/strong\u003e Feeds monitors or external effects while tracking channel-level changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDedicated Recording I\/O:\u003c\/strong\u003e RCA inputs and outputs support analog playback and stereo recording.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Mix8 uses a rugged metal chassis and a compact desktop-friendly format measuring 7.8 inches wide, 9.6 inches deep, and 2.1 inches high. Clearly arranged knobs, input jacks, channel overload indicators, and a four-LED stereo meter keep essential controls accessible. It weighs 2.5 pounds, making it practical for portable setups as well as permanent workspaces.\u003c\/p\u003e\u003cp\u003eConnect microphones to the XLR inputs and line-level equipment to the appropriate 1\/4-inch or RCA inputs, then route the main outputs to powered speakers or an amplifier. Connect powered monitors to the control-room outputs and headphones to the phones output for monitoring. Start with levels turned down, connect the supplied external AC power supply, then bring up source and main levels gradually while watching the overload indicators.\u003c\/p\u003e","brand":"MACKIE","offers":[{"title":"Default Title","offer_id":47991287480483,"sku":"MIX8","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61RPNnetVsL.jpg?v=1786670225"},{"product_id":"mackie-onyx-series-12-channel-premium-analog-mixer-with-multi-track-usb-onyx12","title":"Mackie Onyx Series, 12-Channel Premium Analog Mixer With Multi-Track USB (Onyx12)","description":"\u003cp\u003eThe Mackie Onyx12 is a premium analog USB mixer designed for recording, live sound, streaming, and rehearsal setups that need hands-on control. It combines microphone and line-source mixing with a high-resolution USB audio interface and onboard stereo SD recording. This makes it useful for creators and performers who want to mix, monitor, and capture sessions from one compact console.\u003c\/p\u003e\u003cp\u003eEight Onyx microphone preamps provide up to 60 dB of gain for microphones and compatible source inputs. The mixer is built to handle vocal mics, instruments, keyboards, drum machines, playback devices, and computer audio within one workflow. Its analog channel controls offer direct access to level, EQ, monitor-send, effects-send, panning, mute, solo, and main-mix routing functions.\u003c\/p\u003e\u003cp\u003eThe Onyx12 uses Perkins-style three-band EQ sections to shape sources before they reach the mix. Mono channels include a sweepable midrange section, while stereo channels use a fixed mid frequency. Switchable 100 Hz low-cut filters help reduce unwanted low-frequency content on applicable channels.\u003c\/p\u003e\u003cp\u003eFor recording, the Onyx12 works as a 14x4 USB interface at up to 24-bit\/96 kHz with Mac or PC systems. It can also record and play back stereo audio directly from an SD card, providing a computer-free option for capturing mixes. Four USB return channels can be assigned to two stereo channel strips for flexible playback routing.\u003c\/p\u003e\u003cp\u003eA full-color Studio Command display provides access to SD-card functions and the onboard effects processor. The processor includes 12 effect presets with adjustable parameters and storage for up to six user FX presets. Bluetooth streaming adds a convenient wireless playback source for break music, reference tracks, or mobile-device audio.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight Onyx Mic Preamps:\u003c\/strong\u003e Provides up to 60 dB of gain for microphones and compatible source inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e14x4 USB Interface:\u003c\/strong\u003e Sends multichannel audio to a Mac or PC at up to 24-bit\/96 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSD Stereo Recorder:\u003c\/strong\u003e Records stereo mixes directly to an SD card without requiring a computer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerkins EQ:\u003c\/strong\u003e Offers musical three-band channel equalization with sweepable mono-channel mids.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustomizable Digital Effects:\u003c\/strong\u003e Supplies 12 onboard presets with adjustable effect parameters and user preset storage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth Streaming:\u003c\/strong\u003e Brings wireless playback from a paired phone or tablet to the mixer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Onyx12 uses a rugged steel chassis intended for regular studio, mobile, and stage use. Its full-color LCD and single-knob Studio Command interface centralize control of SD recording, playback, and effects settings. Dedicated channel controls and a dual 12-segment main meter support clear, practical operation during sessions.\u003c\/p\u003e\u003cp\u003eConnect microphones with XLR cables, line-level equipment with 1\/4-inch TRS or TS connections, and powered speakers or amplifiers from the main outputs. Use the two monitor sends for separate monitor mixes, and connect a computer through USB for multitrack recording or playback. Optional rack ears are available for fixed installations; a detachable IEC power cord is included.\u003c\/p\u003e","brand":"MACKIE","offers":[{"title":"Default Title","offer_id":47991287513251,"sku":"ONYX12","price":538.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71M1clXTSCL.jpg?v=1786670229"},{"product_id":"mackie-profx10v3-10-channel-professional-analog-mixer-with-usb-onyx-mic-preamps-and-gigfx-effects-engine","title":"Mackie PROFX10V3 10-Channel USB Analog Mixer","description":"\u003cp\u003eThe Mackie ProFX10v3 is a compact 10-channel analog mixer with USB audio connectivity for small live-sound systems, recording setups, podcasts, streaming rigs, and content-production desks. It provides a central place to connect microphones, instruments, stereo sources, computers, headphones, monitors, and powered speakers. Hands-on channel controls make it practical for users who want direct access to gain, EQ, effects, and output levels.\u003c\/p\u003e\u003cp\u003eFour Onyx microphone preamps provide up to 60 dB of gain for microphones and other compatible sources. Channels 1 and 2 include switchable Hi-Z operation for direct guitar, bass, or instrument connection without a separate DI box. The mixer also includes low-cut filtering on mic-input channels to help reduce unwanted low-frequency rumble.\u003c\/p\u003e\u003cp\u003eIts USB 2.0 interface supports 24-bit audio at 44.1, 48, 96, or 192 kHz for recording and playback with a Mac or PC. The USB configuration provides one stereo input and two stereo outputs, enabling computer playback and recording within the same setup. A dedicated blend control lets users monitor live inputs and USB playback together without monitoring latency.\u003c\/p\u003e\u003cp\u003eThe onboard GigFX engine includes 24 effect presets, covering reverbs, delays, chorus, echo, flange, auto-wah, and other treatments. One-knob compression is available on channels 1 and 2 for fast dynamic control. Three-band EQ on the mono channels gives users practical tonal adjustment at the mixer.\u003c\/p\u003e\u003cp\u003eFor system integration, the ProFX10v3 provides balanced XLR and 1\/4-inch main outputs, control-room outputs, a headphone output, an FX send, and channel insert connections. It can feed powered PA speakers for a performance, control-room monitors for a recording desk, or headphones for personal monitoring. Its compact format makes it suitable for desktop use, portable production systems, and small-event audio control.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Channel Mixer:\u003c\/strong\u003e Combines four mono mic\/line channels with stereo source channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnyx Mic Preamps:\u003c\/strong\u003e Four microphone preamps deliver up to 60 dB of gain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24-Bit\/192 kHz USB:\u003c\/strong\u003e Supports high-resolution computer recording and playback via USB 2.0.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGigFX Effects Engine:\u003c\/strong\u003e Adds 24 onboard effect presets without external processing hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHi-Z Instrument Inputs:\u003c\/strong\u003e Channels 1 and 2 accept guitars and basses directly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Monitor Blend:\u003c\/strong\u003e Balances live inputs with USB playback for low-latency monitoring.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ProFX10v3 uses a compact, rugged mixer format with physical knobs, switches, channel controls, LED metering, and accessible connection points. Its layout separates input processing, effects, monitoring, and master-output control for straightforward operation during recording or live use. Mackie specifies a compact chassis measuring 10.7 inches wide by 11.9 inches deep by 3.3 inches high.\u003c\/p\u003e\u003cp\u003ePlace the mixer on a stable surface with room for top-panel and rear-panel connections. Connect microphones and line-level sources to the appropriate input channels, then route the balanced main outputs to powered speakers, amplifiers, or downstream equipment; use the control-room outputs for monitors and the 1\/4-inch phones jack for headphones. Connect a computer through USB for recording or playback, and use the 12 VDC, 2 A locking power connection with its wall-mount adapter.\u003c\/p\u003e","brand":"MACKIE","offers":[{"title":"Default Title","offer_id":47991287742627,"sku":"PROFX10V3","price":193.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61hpfwWg6mL.jpg?v=1786670235"},{"product_id":"mackie-profx12v3-12-channel-mixer-with-usb-and-effects","title":"Mackie ProFX12v3 12-channel Mixer With USB And Effects","description":"\u003cp\u003eThe Mackie PROFX12V3 is a 12-channel professional analog mixer with USB recording and built-in effects. It is designed for small live sound systems, podcasting, streaming, rehearsal spaces, and home recording setups that need hands-on mixing alongside computer connectivity. Seven Onyx microphone preamps provide flexible input capacity for microphones, instruments, and line-level sources.\u003c\/p\u003e\u003cp\u003eThis mixer helps consolidate multiple performers and playback sources into a manageable stereo mix. Channels include EQ, level control, routing, monitoring functions, and onboard processing tools that support practical everyday mixing. Its USB interface also lets a computer serve as part of the recording and playback workflow without requiring a separate audio interface.\u003c\/p\u003e\u003cp\u003eThe PROFX12V3 supports high-resolution USB audio at up to 24-bit\/192 kHz. A dedicated blend control lets users balance direct mixer monitoring with computer playback for latency-free monitoring while tracking. Two USB stereo playback paths provide added flexibility when sending computer audio back to the mixer.\u003c\/p\u003e\u003cp\u003eFor sound shaping, the mixer combines three-band EQ, a 100 Hz low-cut filter, selectable Hi-Z inputs on channels 1 and 2, and single-knob compression on channels 1 through 4. The GigFX effects engine includes 24 presets covering reverb, delay, chorus, and other processing choices. These tools make it practical to refine vocals, instruments, presentations, and playback without adding several external processors.\u003c\/p\u003e\u003cp\u003eThe PROFX12V3 fits naturally between source equipment and powered speakers, amplifiers, monitors, headphones, or a computer-based recording system. Its stereo subgroup bus, monitor send, main outputs, control-room outputs, and headphone section support flexible live and studio routing. Waveform OEM recording software is included with purchase for users building out a computer-recording workflow.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-Channel Analog Mixing:\u003c\/strong\u003e Combines microphones, instruments, and playback sources in one mixer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeven Onyx Preamps:\u003c\/strong\u003e Provides up to 60 dB of microphone gain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24-Bit\/192 kHz USB:\u003c\/strong\u003e Supports high-resolution computer recording and playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGigFX Effects Engine:\u003c\/strong\u003e Adds 24 onboard reverb, delay, chorus, and effects presets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne-Knob Compression:\u003c\/strong\u003e Helps manage dynamic sources on channels 1 through 4.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLatency-Free Monitoring:\u003c\/strong\u003e Blends direct input monitoring with computer playback.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PROFX12V3 uses a compact mixer format with channel-strip controls, long-throw faders, dedicated routing controls, main metering, and front-panel output connections. Mackie specifies a rugged design for regular transport and use. Published product documentation identifies the unit as a professional analog mixer, but does not specify a particular chassis material.\u003c\/p\u003e\u003cp\u003ePlace the mixer on a stable, ventilated surface with clear access to its controls and connectors. Connect microphones, instruments, and line-level sources to the appropriate channels, then connect the main outputs to powered speakers or an external amplifier; use the monitor send and headphone output as needed. For computer recording or playback, connect the USB port to a compatible computer and select the mixer as the audio device; optional rack ears are available separately for rack installation.\u003c\/p\u003e","brand":"MACKIE","offers":[{"title":"Default Title","offer_id":47991287873699,"sku":"PROFX12V3","price":273.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61f9VBNHkhL.jpg?v=1786670240"},{"product_id":"mackie-profx16v3-16-channel-professional-analog-mixer-with-usb-onyx-mic-preamps-and-gigfx-effects-engine","title":"Mackie ProFX16v3 16-Channel USB Analog Mixer","description":"\u003cp\u003eThe Mackie ProFX16v3 is a 16-channel professional analog mixer with a built-in USB recording interface and onboard effects. It brings microphones, instruments, stereo playback sources, monitoring, and computer audio together in one hands-on console. It is suited to small live-sound systems, rehearsal spaces, home studios, streaming rigs, and production setups that need more source capacity than a compact mixer provides.\u003c\/p\u003e\u003cp\u003eIts eleven Onyx microphone preamps provide up to 60 dB of gain for dynamic, condenser, and other compatible microphone sources. Channels 1 and 2 add switchable Hi-Z operation for direct connection of guitars, basses, and similar instruments without a separate DI box. Built-in single-knob compression on channels 1 through 8 helps manage changing vocal, speech, and instrument levels before they reach the mix.\u003c\/p\u003e\u003cp\u003eThe ProFX16v3 uses a practical analog workflow with gain controls, channel EQ, routing assignments, mute switches, PFL solo, and long-throw faders. Its 3-band EQ includes a sweepable mid-frequency control on channels other than the 1\/8-inch stereo input channel. A 100 Hz low-cut filter and EQ bypass capability provide useful tools for shaping sources and simplifying setup.\u003c\/p\u003e\u003cp\u003eFor computer recording and playback, the integrated USB 2.0 interface supports 24-bit conversion at sample rates up to 192 kHz. The 2x4 USB design records a stereo signal to a computer while returning two independent stereo playback streams to the mixer. A dedicated blend control supports direct, latency-free monitoring alongside DAW playback during overdubs.\u003c\/p\u003e\u003cp\u003eThe onboard GigFX engine provides 24 selectable effects presets, including room, hall, plate, chorus, delay, flange, auto-wah, and other processing. Three aux outputs support separate monitor mixes, while four subgroup outputs expand routing for larger setups and external devices. Main outputs, control-room outputs, headphones, inserts, USB connectivity, and an external FX footswitch connection make the mixer adaptable as a central control point for a growing audio system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e16-Channel Mixing:\u003c\/strong\u003e Combines microphone, instrument, stereo, and computer sources in one console.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEleven Onyx Preamps:\u003c\/strong\u003e Provides up to 60 dB of microphone gain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2x4 USB Interface:\u003c\/strong\u003e Supports stereo recording and flexible dual-stereo computer playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGigFX Effects Engine:\u003c\/strong\u003e Adds 24 selectable onboard effects without external processing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight Compressor Channels:\u003c\/strong\u003e Helps control dynamic sources on channels 1 through 8.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour Subgroup Outputs:\u003c\/strong\u003e Expands routing options for grouped channels and external equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ProFX16v3 uses a rugged, desktop-format mixer chassis with a clearly organized control surface, channel faders, dedicated master controls, and dual 12-segment main meters. Mackie does not specify a chassis-material designation, but the design is intended for regular studio, rehearsal, and live-production use. Main output connections are located on the rear panel, keeping system cabling organized around the mixer.\u003c\/p\u003e\u003cp\u003eConnect microphones, line-level sources, and instruments before powering the mixer, then feed powered speakers, amplifiers, or processors from the main outputs. Use the three aux outputs for monitor systems, the control-room outputs for studio monitors, and the headphone output for personal monitoring. The mixer uses a detachable 3-pin IEC power cord and can connect to a Mac or PC through USB; optional rack ears are available separately for rack installation.\u003c\/p\u003e","brand":"MACKIE","offers":[{"title":"Default Title","offer_id":47991288103075,"sku":"PROFX16V3","price":431.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/717Bq0qFdNL.jpg?v=1786670245"},{"product_id":"mackie-profx6v3-6-channel-professional-analog-mixer-with-usb-onyx-mic-preamps-and-gigfx-effects-engine","title":"Mackie ProFX6v3 6-Channel Analog USB Mixer","description":"\u003cp\u003eThe Mackie ProFX6v3 is a compact 6-channel analog mixer with a built-in USB audio interface for small live systems, desktop recording, streaming, and content production. It brings microphones, instruments, stereo line sources, and computer playback into a single hands-on control surface. This format suits solo performers, podcasters, musicians, and creators who need straightforward source control without a large mixer.\u003c\/p\u003e\u003cp\u003eChannels 1 and 2 use Mackie Onyx microphone preamps with up to 60 dB of gain. Each accepts a microphone or line-level source through its combo input, and switchable Hi-Z operation lets a guitar or bass connect directly by 1\/4-inch cable. The preamps are designed for clean gain staging across voice, acoustic instruments, and direct instrument sources.\u003c\/p\u003e\u003cp\u003eThe mixer uses 2-band shelving EQ on channels 1 and 2, with low control centered at 80 Hz and high control centered at 12 kHz. A 100 Hz low-cut filter on the mic channels helps reduce low-frequency rumble before it reaches the main mix. Global 48V phantom power supports compatible condenser microphones connected to the mic inputs.\u003c\/p\u003e\u003cp\u003eIts USB 2.0 interface operates at 24-bit resolution and supports 44.1, 48, 96, and 192 kHz sample rates. The 2x4 USB design records a stereo mix to a Mac or PC while providing two stereo computer-return paths. A dedicated blend control allows headphones to mix live inputs with computer playback for direct, latency-free monitoring.\u003c\/p\u003e\u003cp\u003eThe built-in GigFX processor supplies 24 effects presets, including room, hall, plate, delay, chorus, echo, flange, and more. Balanced XLR and 1\/4-inch main outputs can feed powered speakers, amplifiers, or other line-level equipment. With its small 7.5-inch-wide footprint, the ProFX6v3 works well as the front end of a compact PA, recording desk, or streaming station.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Onyx Mic Preamps:\u003c\/strong\u003e Delivers up to 60 dB of gain for microphones and low-level sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitchable Hi-Z Inputs:\u003c\/strong\u003e Lets guitars and basses connect directly to channels 1 and 2.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24-Bit\/192 kHz USB:\u003c\/strong\u003e Supports high-resolution stereo recording and computer playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGigFX Effects Engine:\u003c\/strong\u003e Provides 24 onboard effects presets without requiring external processing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Monitoring Blend:\u003c\/strong\u003e Mixes live signals and DAW playback in headphones without monitoring latency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 Hz Low-Cut Filter:\u003c\/strong\u003e Helps reduce rumble and unwanted low-frequency buildup on mic channels.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ProFX6v3 is a desktop-format analog mixer measuring 7.5 inches wide, 8.4 inches deep, and 2.9 inches high. Channel controls use compact rotary level controls rather than long-throw faders, keeping the layout efficient for close-range operation. Two eight-segment main meters provide left\/right level indication from -24 dBu through overload.\u003c\/p\u003e\u003cp\u003eConnect microphones, line-level gear, or Hi-Z instruments to channels 1 and 2, then connect a stereo source to the 1\/4-inch inputs or 1\/8-inch stereo input as needed. Run the balanced main outputs to powered speakers, an amplifier, or other line-level equipment, and connect a computer through USB for recording and playback. The mixer uses a locking 12V DC, 2A external wall-mount power adapter and can be fitted to a microphone stand with the optional Atlas AD-11B adapter and specified mounting hardware.\u003c\/p\u003e","brand":"MACKIE","offers":[{"title":"Default Title","offer_id":47991288135843,"sku":"PROFX6V3","price":136.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/611SNozBwUL.jpg?v=1786670250"},{"product_id":"mackie-profx6v3-6-channel-professional-analog-mixer-with-usb-onyx-mic-preamps-gigfx-effects-engine-and-bluetooth","title":"Mackie ProFX6v3+ 6-Channel Analog Mixer With USB-C","description":"\u003cp\u003eThe Mackie ProFX6v3+ is a compact 6-channel analog mixer and USB-C audio interface for creators, musicians, podcasters, and small live-sound systems. It brings microphones, instruments, computer audio, Bluetooth playback, and portable-device audio into one hands-on mixing surface. This makes it useful when a simple desktop setup needs more source control than a standalone audio interface provides.\u003c\/p\u003e\u003cp\u003eTwo Onyx microphone preamps provide up to 60 dB of gain for microphones and other low-level sources. Channels 1 and 2 add one-button compression, two-band EQ, 100 Hz low-cut filtering, and Hi-Z switching for direct instrument connection. The result is a practical front end for voice, acoustic instrument, guitar, and compact performance setups.\u003c\/p\u003e\u003cp\u003eThe GigFX+ engine adds editable digital effects to the analog workflow. Its full-color LCD lets users adjust and save 12 effects presets directly from the mixer. This provides convenient ambience and creative processing for livestreams, rehearsals, recordings, and small events without relying on a separate effects processor.\u003c\/p\u003e\u003cp\u003eIts USB-C interface supports 24-bit\/192 kHz conversion and 2x4 USB audio operation. Standard mode records the main mix, Loopback mode combines computer and mixer audio for streaming, and Interface mode sends channels 1 and 2 without effects or EQ processing. A headphone blend control helps balance computer playback with a direct mixer feed for latency-free monitoring.\u003c\/p\u003e\u003cp\u003eBidirectional Bluetooth supports music playback and caller integration from a compatible mobile device. The mixer also includes a stereo 1\/8-inch input for an additional playback source and balanced XLR main outputs for connection to powered speakers or a recording chain. It fits naturally at the center of a compact creator workstation, rehearsal rig, or small PA system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Onyx Mic Preamps:\u003c\/strong\u003e Supplies up to 60 dB of gain for microphones and other low-level sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGigFX+ Effects Engine:\u003c\/strong\u003e Provides editable digital effects with 12 savable presets for live and recorded sound.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-Color LCD:\u003c\/strong\u003e Enables direct editing and saving of effects settings from the mixer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24-Bit\/192 kHz USB-C Interface:\u003c\/strong\u003e Connects to a computer for high-resolution recording and playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree USB Recording Modes:\u003c\/strong\u003e Supports full-mix recording, loopback streaming, or dry channels 1 and 2 capture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBidirectional Bluetooth:\u003c\/strong\u003e Brings in music or callers while sending mixer audio back to a paired device.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ProFX6v3+ uses a solid steel chassis with ABS side protection for portable use. Its top-panel layout keeps input gain, EQ, compression, effects, monitoring, and master controls within reach. A two-column, eight-segment main L\/R meter provides visual output monitoring.\u003c\/p\u003e\u003cp\u003ePlace the mixer on a stable desktop, workstation, or performance surface with clear access to the connections and controls. Connect microphones or instruments to channels 1 and 2, route the XLR main outputs to compatible powered speakers or downstream equipment, and use USB-C for computer audio. Use the supplied external 12 VDC power adapter and set levels while monitoring the main output meters.\u003c\/p\u003e","brand":"MACKIE","offers":[{"title":"Default Title","offer_id":47991288463523,"sku":"PROFX6V3+","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61ERdJoFUKL.jpg?v=1786670291"},{"product_id":"mackie-profx10v3-10-channel-professional-analog-mixer-with-usb-onyx-mic-preamps-gigfx-effects-engine-and-bluetooth","title":"Mackie ProFX10v3+ 10-Channel Analog USB-C Mixer","description":"\u003cp\u003eThe Mackie ProFX10v3+ is a 10-channel analog mixer with a USB-C audio interface for recording, streaming, podcasting, rehearsals, and compact live-sound systems. It brings microphones, instruments, stereo playback devices, Bluetooth audio, and computer audio into one hands-on control surface. This makes it a practical central mixer for creators and performers who need straightforward source control without relying entirely on software.\u003c\/p\u003e\u003cp\u003eFour Onyx microphone preamps provide up to 60 dB of gain for microphones and other low-level sources. Channels 1 and 2 also include Hi-Z switching for directly connecting instruments such as guitar or bass. Three-band EQ across all channels, plus one-knob compression on channels 1 and 2, helps shape and manage sources before they reach the main mix.\u003c\/p\u003e\u003cp\u003eThe built-in GigFX+ effects engine provides 12 editable effects, with a full-color LCD and rotary control for selecting and adjusting parameters. Effects can be used for practical vocal, instrument, and presentation processing without requiring a separate outboard processor. The mixer also provides a dedicated FX send for connecting compatible external effects equipment.\u003c\/p\u003e\u003cp\u003eIts USB-C connection functions as a 24-bit, up-to-192 kHz 2x4 audio interface. Standard mode sends the full mix with effects, Loopback mode combines mixer and computer audio for streaming, and Interface mode records channels 1 and 2 without effects processing. Separate headphone level and blend controls support monitoring between computer playback and the mixer feed.\u003c\/p\u003e\u003cp\u003eBi-directional Bluetooth adds a wireless source for music playback and caller integration through a dedicated channel. Main XLR and 1\/4-inch outputs connect to powered speakers, amplifiers, or recording equipment, while control-room and headphone outputs support local monitoring. The ProFX10v3+ fits well as the front end of a desktop studio, livestream station, rehearsal setup, or small portable PA system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour Onyx Mic Preamps:\u003c\/strong\u003e Provides up to 60 dB of gain for microphones and low-level sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGigFX+ Effects Engine:\u003c\/strong\u003e Includes 12 editable effects controlled from a full-color LCD.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C Audio Interface:\u003c\/strong\u003e Supports 24-bit audio at sample rates up to 192 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree Recording Modes:\u003c\/strong\u003e Select full-mix, loopback, or dry channels 1 and 2 recording.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBi-Directional Bluetooth:\u003c\/strong\u003e Adds wireless playback and caller integration through a dedicated channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Monitoring:\u003c\/strong\u003e Blends computer playback with a latency-free mixer feed for headphones.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ProFX10v3+ uses a solid steel chassis with tough ABS side protection for regular desktop, studio, and portable-use environments. Its top-panel layout places input gain, EQ, compression, effects, channel levels, metering, and output controls within reach. A full-color LCD provides direct access to GigFX+ editing and saved effect settings.\u003c\/p\u003e\u003cp\u003ePlace the mixer on a stable, ventilated surface and connect microphones, instruments, playback devices, headphones, and powered speakers or an external amplifier as needed. Use balanced XLR or 1\/4-inch connections where compatible equipment is available, and connect a computer through USB-C for recording or playback. The USB connection carries audio only and does not power the mixer; the ProFX10v3+ uses a 12 V DC, 2 A hard-wired wall-mount power adapter.\u003c\/p\u003e","brand":"MACKIE","offers":[{"title":"Default Title","offer_id":47991288496291,"sku":"PROFX10V3+","price":237.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/71YOTsHoqHL.jpg?v=1786670297"},{"product_id":"mackie-profx12v3-12-channel-professional-analog-mixer-with-usb-onyx-mic-preamps-gigfx-effects-engine-and-bluetooth","title":"Mackie ProFX12v3+ 12-Channel Analog Mixer","description":"\u003cp\u003eThe Mackie ProFX12v3+ is a 12-channel professional analog mixer with a built-in USB-C audio interface for recording, streaming, podcasting, and live sound. It brings microphones, instruments, playback devices, Bluetooth audio, and computer sound together on one hands-on control surface. This makes it a practical choice for small bands, home studios, creators, and event systems that need flexible audio routing without separate interface hardware.\u003c\/p\u003e\u003cp\u003eSeven Onyx microphone preamps provide up to 60 dB of gain for microphones and other low-level sources. Every channel includes 3-band EQ, while channels 1 through 4 add one-knob compression for straightforward dynamic control. Channels 1 and 2 also support Hi-Z operation, allowing compatible guitars or basses to connect directly without a separate DI box.\u003c\/p\u003e\u003cp\u003eThe integrated GigFX+ effects engine provides digital effects within an analog mixer workflow. Its full-color LCD enables effect selection, editing, and preset saving directly from the mixer. This gives vocalists, instruments, and live mixes access to processing without requiring an external effects unit.\u003c\/p\u003e\u003cp\u003eFor computer audio, the ProFX12v3+ includes a 24-bit\/192 kHz 2x4 USB-C interface with Standard, Loopback, and Interface recording modes. Standard mode captures the full mix, Loopback combines computer and mixer audio for streaming, and Interface mode records channels 1 and 2 without effects processing. A dedicated blend control supports monitoring between direct mixer audio and USB return audio.\u003c\/p\u003e\u003cp\u003eBi-directional Bluetooth provides a dedicated path for wireless playback and compatible phone-call integration. Separate monitor, FX, and subgroup busses support stage-monitor feeds, external processing, and secondary output routing. Main, control-room, subgroup, headphone, and USB connections allow the mixer to serve as a central hub for a compact live or recording system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeven Onyx Mic Preamps:\u003c\/strong\u003e Provides up to 60 dB of gain for microphones and low-level sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGigFX+ Effects Engine:\u003c\/strong\u003e Adds editable onboard effects with user-saveable presets and a color LCD.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24-Bit\/192 kHz USB-C Interface:\u003c\/strong\u003e Connects a computer for high-resolution recording and playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree USB Recording Modes:\u003c\/strong\u003e Supports full-mix, loopback, or dry channels 1-2 recording workflows.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBi-Directional Bluetooth:\u003c\/strong\u003e Handles wireless music playback and compatible caller audio on a dedicated channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Processing Controls:\u003c\/strong\u003e Combines EQ, low-cut filtering, compression, and Hi-Z instrument inputs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ProFX12v3+ uses a solid steel chassis with ABS side protection for regular studio, mobile-production, and live-event use. Its top-panel layout places gain, EQ, sends, routing controls, and faders within easy reach. A full-color LCD provides direct control of the onboard GigFX+ effects section.\u003c\/p\u003e\u003cp\u003eConnect microphones and line-level sources to the channel inputs, then feed powered speakers, amplifiers, studio monitors, or external processors from the appropriate outputs. The main outputs can feed powered speakers or an amplifier connected to passive speakers; the mixer does not directly power passive speakers. Use the USB-C connection for computer recording and playback, and use the Bluetooth channel or 1\/8-inch stereo input for compatible mobile playback sources.\u003c\/p\u003e","brand":"MACKIE","offers":[{"title":"Default Title","offer_id":47991288529059,"sku":"PROFX12V3+","price":316.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61APCG_t9bL.jpg?v=1786670302"},{"product_id":"emb-300-watts-4-channel-100v-70v-mixer-amplifier-usb-bluetooth-4-16hom","title":"Emb 300 Watts 4-Channel 100V 70V Mixer Amplifier USB Bluetooth 4-16hom","description":"\u003cp\u003eThe EMB Professional ECP3200 is a 300-watt maximum-power mixer amplifier designed to drive passive loudspeakers in PA, DJ, karaoke, club, party, and home-audio systems. It combines amplification with four-channel operation and supports 70V, 100V, and 4–16-ohm speaker applications as listed. This makes it a practical central amplifier for installations that need multiple speaker connection options.\u003c\/p\u003e\u003cp\u003eThe ECP3200 is intended for users building a sound system around passive speakers rather than self-powered speakers. Its selectable Stereo, Parallel, and Bridge-Mono modes provide flexibility when configuring speaker and monitor arrangements. Choose the mode that matches the intended system layout and speaker load.\u003c\/p\u003e\u003cp\u003eWith a specified 70 Hz to 18 kHz frequency response, this amplifier is suited to voice, music playback, karaoke, and general PA reinforcement. The published signal-to-noise ratio is 66 dB, while listed input sensitivity is 70 dB. Its performance profile is geared toward straightforward sound reinforcement and playback duties.\u003c\/p\u003e\u003cp\u003eUSB playback and Bluetooth connectivity add convenient source options for compatible audio playback. The amplifier also provides Neutrik Speakon and binding-post speaker outputs, allowing connection methods commonly used in installed and portable PA setups. These output choices help accommodate different speaker cable terminations.\u003c\/p\u003e\u003cp\u003eBuilt-in short-circuit, thermal, clip-limiter, and DC-voltage protection features support more controlled operation in demanding use. The ECP3200 is rack-mountable, making it suitable for equipment racks, mobile DJ cases, and organized fixed-system installations. Pair it with appropriately matched passive speakers, suitable speaker wiring, and source equipment to complete a functional audio system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W Maximum Power:\u003c\/strong\u003e Provides amplification for compatible passive PA speakers and monitors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Channel Design:\u003c\/strong\u003e Supports multi-channel mixer-amplifier system configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Operating Modes:\u003c\/strong\u003e Stereo, Parallel, and Bridge-Mono modes add setup flexibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB And Bluetooth:\u003c\/strong\u003e Adds convenient wired and wireless playback source options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeakon And Binding Posts:\u003c\/strong\u003e Supports two commonly used speaker connection methods.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection Circuitry:\u003c\/strong\u003e Includes short-circuit, thermal, clip-limiter, and DC protection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ECP3200 uses a rack-mountable amplifier format intended for organized audio-system installations. Confirmed product information identifies its front-panel control layout, USB playback provision, and rear-panel speaker connections. The manufacturer material specification for the enclosure is not confirmed.\u003c\/p\u003e\u003cp\u003eInstall the amplifier where ventilation is available and use speaker wiring terminated for the selected Speakon or binding-post output connection. Match the amplifier mode, speaker wiring arrangement, and speaker load to the system design before powering it on. This unit is for passive-speaker systems; powered speakers do not require an external power amplifier.\u003c\/p\u003e","brand":"EMB PROFESSIONAL","offers":[{"title":"Default Title","offer_id":47991334469795,"sku":"ECP3200","price":110.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/57_29d80872-3dbf-4dd3-aef3-6bb0bbbbf4dc.jpg?v=1786673005"},{"product_id":"mackie-mix5-5-channel-compact-mixer-black","title":"Mackie Mix5 5-Channel Compact Mixer, Black","description":"\u003cp\u003eThe Mackie Mix5 is a compact analog audio mixer built for combining microphones, instruments, media players, and other line-level sources into one manageable stereo mix. It provides five total input channels in a space-saving format, making it suitable for small recording setups, podcasts, livestreams, rehearsals, presentations, and simple PA systems. Its straightforward control layout helps users set levels and route sound without the complexity of a larger console.\u003c\/p\u003e\u003cp\u003eChannel 1 accepts either a microphone or line-level source, while channels 2\/3 and 4\/5 provide stereo 1\/4-inch line inputs for keyboards, music players, interfaces, and similar equipment. Dedicated stereo RCA tape inputs and outputs add convenient playback and recording connections. Main left\/right outputs provide the final mix for powered speakers, an amplifier, or another recording device.\u003c\/p\u003e\u003cp\u003eThe Mix5 is designed around a high-headroom, low-noise signal path for clean operation with a variety of audio sources. Its mic\/line channel uses a gain control, pan control, level control, and two-band EQ for practical adjustment of a vocal, instrument, or mono source. High and low shelving EQ controls let users shape brightness and bass response without adding unnecessary processing.\u003c\/p\u003e\u003cp\u003eIts XLR microphone input supplies fixed +15V phantom power for compatible condenser microphones. The mixer also supports balanced or unbalanced 1\/4-inch line connections, helping it integrate with professional and consumer audio gear. Stereo RCA connections make it easy to bring in playback audio or send the main mix to a recorder with appropriate analog inputs.\u003c\/p\u003e\u003cp\u003eFor monitoring, the Mix5 includes a dedicated stereo headphone output with its own level control and LED level metering. The compact metal-chassis design is intended for portable use while remaining practical for a desktop or small equipment rack shelf. It is an analog mixer rather than a car stereo or vehicle-specific audio component, so it requires an external AC outlet and compatible audio equipment.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive-Channel Format:\u003c\/strong\u003e Combines one mono mic\/line channel with two stereo line-input channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMic\/Line Input:\u003c\/strong\u003e Supports an XLR microphone or 1\/4-inch line-level source on channel 1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Band EQ:\u003c\/strong\u003e Adjusts high and low frequencies on the mono input channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixed Phantom Power:\u003c\/strong\u003e Provides +15V phantom power at the Mix5 XLR input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRCA Tape I\/O:\u003c\/strong\u003e Adds stereo playback and recording connections for compatible analog devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone Monitoring:\u003c\/strong\u003e Offers a stereo headphone output with separate volume control.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Mix5 uses a rugged metal chassis with a compact angled-console layout for accessible knobs and connections. Its controls include input gain, EQ, pan, channel levels, main mix level, and headphone level, while LED meters provide visual level monitoring. At 5.5 inches wide and 7.7 inches deep, it takes up little desktop space and is convenient to transport.\u003c\/p\u003e\u003cp\u003eConnect the supplied external AC power supply to the mixer before connecting it to a properly rated AC outlet; the unit powers on automatically when connected. Use the XLR or 1\/4-inch input on channel 1 for one mono source, connect stereo sources to the paired 1\/4-inch inputs, and feed powered speakers or an amplifier from the main L\/R outputs. Use standard 1\/4-inch headphone adapters where needed, and lower the headphone level before connecting headphones.\u003c\/p\u003e","brand":"MACKIE","offers":[{"title":"Default Title","offer_id":47991367631011,"sku":"MIX5","price":52.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/5416\/9507\/files\/61Fm7_JNSGL.jpg?v=1786675116"}],"url":"https:\/\/nsiexport.com\/collections\/analog-mixers.oembed","provider":"NSI Export","version":"1.0","type":"link"}